Polytrimethylenimines: Highly Potent Antibacterial Agents with Activity and Toxicity Modulated by the Polymer Molecular Weight.

Cationic polymers have been extensively investigated as a potential replacement for traditional antibiotics. Here, we examined the effect of molecular weight (MW) on the antimicrobial, cytotoxic, and hemolytic activity of linear polytrimethylenimine (L-PTMI). The results indicate that the biological activity of the polymer sharply increases as MW increases. Thanks to a different position of the antibacterial activity and toxicity thresholds, tuning the MW of PTMI allows one to achieve a therapeutic window between antimicrobial activity and toxicity concentrations. L-PTMI presents significantly higher antimicrobial activity against model microorganisms than linear polyethylenimine (L-PEI) when polymers with a similar number of repeating units are compared. For the derivatives of L-PTMI and L-PEI, obtained through N-monomethylation and partial N,N-dimethylation of linear polyamines, the antimicrobial activity and toxicity were both reduced; however, resulting selectivity indices were higher. Selected materials were tested against clinical isolates of pathogens from the ESKAPE group and Mycobacteria, revealing good antibacterial properties of L-PTMI against antibiotic-resistant strains of Gram-positive and Gram-negative bacteria but limited antibacterial properties against Mycobacteria.

Regulation of Lipid Bilayer Ion Permeability by Antibacterial Polymethyloxazoline-Polyethyleneimine Copolymers.

Amphiphilic antimicrobial polymers display activity against the outer bacterial cell membrane, triggering various physiological effects. We investigated the regulation of ion transport across the lipid bilayer to understand differences in biological activity for a series of amphiphilic polymethyloxazoline - polyethyleneimine copolymers. The results confirmed that the tested structures were able to increase the permeability of the lipid bilayer (LB) membrane or its rupture. Black lipid membrane (BLM) experiments show that the triggered conductance profile and its character is strongly correlated with the polymer structure and zeta potential. The polymer exhibiting the highest antimicrobial activity promotes ion transport by using a unique mechanism and step-like characteristics with well-defined discreet openings and closings. The molecule was incorporated into the membrane in a reproducible way, and the observed channel-like activity could be responsible for the antibacterial activity of this molecule.

Brush Swelling and Attachment Strength of Barnacle Adhesion Protein on Zwitterionic Polymer Films as a Function of Macromolecular Structure.

The exceptional hydration of sulfobetaine polymer brushes and their resistance toward nonspecific protein absorption allows for the construction of thin films with excellent antibiofouling properties. In this work, swollen sulfobetaine brushes, prepared by surface-initiated atom transfer radical polymerization of two monomers, differentiated by the nature of the polymerizable group, are studied and compared by a liquid-cell atomic force microscopy technique and spectroscopic ellipsometry. Colloidal AFM-based force spectroscopy is employed to estimate brush grafting density and characterize nanomechanical properties in salt water. When the ionic strength-induced swelling behaviors of the two systems are compared, the differences observed on the antipolyelectrolyte response can be correlated with the stiffness variation on brush compression, likely to be promoted by solvation differences. The higher solvation of amide groups is proposed to be responsible for the lower adhesion force of the barnacle cyprid's temporary adhesive proteins. The adhesion results provide further insights into the antibiofouling activity against barnacle cyprid settlement attributed to polysulfobetaine brushes.

Dominant Albumin-Surface Interactions under Independent Control of Surface Charge and Wettability.

Understanding protein adsorption behaviors on solid surfaces constitutes an important step toward development of efficacious and biocompatible medical devices. Both surface charge and wettability have been shown to influence protein adsorption attributes, including kinetics, quantities, deformation, and reversibility. However, determining the dominant interaction in these surface-induced phenomena is challenging because of the complexity of inter-related mechanisms at the liquid/solid interface. Herein, we reveal the dominant interfacial forces in these essential protein adsorption attributes under the influence of a combination of surface charge and wettability, using quartz crystal microbalance with dissipation monitoring and atomic force microscopy-based force spectroscopy on a series of model surfaces. These surfaces were fabricated via layer-by-layer assembly, which allowed two-dimensional control of surface charge and wettability with minimal cross-parameter dependency. We focused on a soft globular protein, bovine serum albumin (BSA), which is prone to conformational changes during adsorption. The information obtained from the two techniques shows that both surface charge and hydrophobicity can increase the protein-surface interaction forces and the adsorbed amount. However, surface hydrophobicity triggered a greater extent of deformation in the adsorbed BSA molecules, leading to more dehydration, spreading, and resistance to elution by ionic strength changes regardless of the surface charge. The role played by the surface charge in the adsorbed protein conformation and extent of desorption induced by changes in the ionic strength is secondary to that of surface hydrophobicity. These findings advance the understanding of how surface chemistry and properties can be tailored for directing protein-substrate interactions.

Engineered, Robust Polyelectrolyte Multilayers by Precise Control of Surface Potential for Designer Protein, Cell, and Bacteria Adsorption.

Cross-linked layer-by-layer (LbL) assemblies with a precisely tuned surface ζ-potential were fabricated to control the adsorption of proteins, mammalian cells, and bacteria for different biomedical applications. Two weak polyions including a synthesized polyanion and polyethylenimine were assembled under controlled conditions and cross-linked to prepare three robust LbL films as model surfaces with similar roughness and water affinity but displaying negative, zero, and positive net charges at the physiological pH (7.4). These surfaces were tested for their abilities to adsorb proteins, including bovine serum albumin (BSA) and lysozyme (LYZ). In the adsorption tests, the LbL films bind more proteins with opposite charges but less of those with like charges, indicating that electrostatic interactions play a major role in protein adsorption. However, LYZ showed higher nonspecific adsorption than BSA, because of the specific behavior of LYZ molecules, such as stacked multilayer formation during adsorption. To exclude such stacking effects from experiments, protein molecules were covalently immobilized on AFM colloidal probes to measure the adhesion forces against the model surfaces utilizing direct protein molecule-surface contacts. The results confirmed the dominating role of electrostatic forces in protein adhesion. In fibroblast cell and bacteria adhesion tests, similar trends (high adhesion on positively charged surfaces, but much lower on neutral and negatively charged surfaces) were observed because the fibroblast cell and bacterial surfaces studied possess negative potentials. The cross-linked LbL films with improved stability and engineered surface charge described in this study provide an excellent platform to control the behavior of different charged objects and can be utilized in practical biomedical applications.

Multilayers of fluorinated amphiphilic polyions for marine fouling prevention.

Sequential layer-by-layer (LbL) deposition of polyelectrolytes followed by chemical cross-linking was investigated as a method to fabricate functional amphiphilic surfaces for marine biofouling prevention applications. A novel polyanion, grafted with amphiphilic perfluoroalkyl polyethylene glycol (fPEG) side chains, was synthesized and subsequently used to introduce amphiphilic character to the LbL film. The structure of the polyanion was confirmed by FTIR and NMR. Amphiphilicity of the film assembly was demonstrated by both water and hexadecane static contact angles. XPS studies of the cross-linked and annealed amphiphilic LbL films revealed the increased concentration of fPEG content at the film interface. In antifouling assays, the amphiphilic LbL films effectively prevented the adhesion of the marine bacterium Pseudomonas (NCIMB 2021).

Biomimicking micropatterned surfaces and their effect on marine biofouling.

When synthetic materials are submerged in marine environments, dissolved matter and marine organisms attach to their surfaces by a process known as marine fouling. This phenomenon may lead to diminished material performance with detrimental consequences. Bioinspired surface patterning and chemical surface modifications present promising approaches to the design of novel functional surfaces that can prevent biofouling phenomena. In this study, we report the synergistic effects of surface patterns, inspired by the marine decapod crab Myomenippe hardwickii in combination with chemical surface modifications toward suppressing marine fouling. M. hardwickii is known to maintain a relatively clean carapace although the species occurs in biofouling communities of tropical shallow subtidal coastal waters. Following the surface analysis of selected specimens, we designed hierarchical surface microtopographies that replicate the critical features observed on the crustacean surface. The micropatterned surfaces were modified with zwitterionic polymer brushes or with layer-by-layer deposited polyelectrolyte multilayers to enhance their antifouling and/or fouling-release potential. Chemically modified and unmodified micropatterned surfaces were subjected to extensive fouling tests, including laboratory assays against barnacle settlement and algae adhesion, and field static immersion tests. The results show a statistically significant reduction in settlement on the micropatterned surfaces as well as a synergistic effect when the microtopographies are combined with grafted polymer chains.

Unlocking the Potential: PEGylation and Molecular Weight Reduction of Ionenes for Enhanced Antifungal Activity and Biocompatibility.

Numerous synthetic polymers, imitating natural antimicrobial peptides, have demonstrated potent antimicrobial activity, positioning them as potential candidates for new antimicrobial drugs. However, the high activity of these molecules often comes at the cost of elevated toxicity against eukaryotic organisms. In this study, a series of cationic ionenes with varying molecular weights to assess the influence of polymer chain length on ionene activity is investigated. To enhance polymer antimicrobial activity and limit toxicity a PEG side chain is introduced into the repeating unit. The resulting molecules consistently exhibited high activity against three model organisms: E. coli, S. aureus and C. albicans. The incorporation of side PEG chain improves antifungal properties and biocompatibility, regardless of molecular weight. The most important finding of this work is that the reduction of polymer molecular mass led to increased antifungal activity and reduced cytotoxicity against HMF and MRC-5 cell lines simultaneously. As a result, the best-performing molecules reported herein displayed minimal inhibitory concentrations (MIC) as low as 2 and 0.0625 µg mL1 for C. albicans and C. tropicalis respectively, demonstrating exceptional selectivity. It is plausible that some of described herein molecules can serve as potential lead candidates for new antifungal drugs.

Enhanced stability of low fouling zwitterionic polymer brushes in seawater with diblock architecture.

The successful implementation of zwitterionic polymeric brushes as antifouling materials for marine applications is conditioned by the stability of the polymer chain and the brush-anchoring segment in seawater. Here we demonstrate that robust, antifouling, hydrophilic polysulfobetaine-based brushes with diblock architecture can be fabricated by atom-transfer radical polymerization (ATRP) using initiator-modified surfaces. Sequential living-type polymerization of hydrophobic styrene or methyl methacrylate and commercially available hydrophilic sulfobetaine methacrylamide (SBMAm) monomer is employed. Stability enhancement is accomplished by protecting the siloxane anchoring bond of brushes on the substrate, grafted from silicon oxide surfaces. The degradation of unprotected PSBMAm brushes is clearly evident after a 3 month immersion challenge in sterilized artificial seawater. Ellipsometry and atomic force microscopy (AFM) measurements are used to follow changes in coating thickness and surface morphology. Comparative stability results indicate that surface-tethered poly(methyl methacrylate) and polystyrene hydrophobic blocks substantially improve the stability of zwitterionic brushes in an artificial marine environment. In addition, differences between the hydration of zwitterionic brushes in fresh and salt water are discussed to provide a better understanding of hydration and degradation processes with the benefit of improved design of polyzwitterionic coatings.

Membrane lytic activity of antibacterial ionenes, critical role of phosphatidylcholine (PC) and cardiolipin (CL).

Understanding the mechanism by which an antibacterial agent interacts with a model membrane provides vital information for better design of future antibiotics. In this study, we investigated two antibacterial polymers, hydrophilic C0-T-p and hydrophobic C8-T-p ionenes, known for their potent antimicrobial activity and ability to disrupt the integrity of lipid bilayers. Our hypothesize is that the composition of a lipid bilayer alters the mechanism of ionenes action, potentially providing an explanation for the observed differences in their bioactivity and selectivity. Calcein release experiments utilizing a range of liposomes to examine the impact of (i) cardiolipin (CL) to phosphatidylglycerol (PG) ratio, (ii) overall vesicle charge, and (iii) phosphatidylethanolamine (PE) to phosphatidylcholine (PC) ratio on the activity of ionenes were performed. Additionally, polymer-bilayer interactions were also investigated through vesicle fusion assay and the black lipid membrane (BLM) technique The activity of C0-T-p is strongly influenced by the amount of cardiolipin, while the activity of C8-T-p primarily depends on the overall vesicle charge. Consequently, C0-T-p acts through interactions with CL, whereas C8-T-p modifies the bulk properties of the membrane in a less-specific manner. Moreover, the presence of a small amount of PC in the membrane makes the vesicle resistant to permeabilization by tested molecules. Intriguingly, more hydrophilic C0-T-p retains higher membrane activity compared to the hydrophobic C8-T-p. However, both ionenes induce vesicle fusion and increase lipid bilayer ion permeability.

Main-chain flexibility and hydrophobicity of ionenes strongly impact their antimicrobial activity: an extended study on drug resistance strains and Mycobacterium.

The spread of antibiotic-resistant pathogens and the resurgence of tuberculosis disease are major motivations to search for novel antimicrobial agents. Some promising candidates in this respect are cationic polymers, also known as synthetic mimics of antimicrobial peptides (SMAMPs), which act through the membrane-lytic mechanism. Development of resistance toward SMAMPs is less likely than toward currently employed antibiotics; however, further studies are needed to better understand their structure-activity relationship. The main objective of this work is to understand the cross-influence of hydrophobicity, main-chain flexibility, and the topology of ionenes (polycations containing a cationic moiety within the main-chain) on activity. To fulfill this goal, a library of ionenes was developed and compared with previously investigated molecules. The obtained compounds display promising activity against the model microorganisms and drug-resistance clinical isolates, including Mycobacterium tuberculosis. The killing efficiency was also investigated, and results confirm a strong effect of hydrophobicity, revealing higher activity for molecules possessing the flexible linker within the polymer main-chain.

Influence of PEG Subunit on the Biological Activity of Ionenes: Synthesis of Novel Polycations, Antimicrobial and Toxicity Studies.

An alarming increase of antibiotic resistance among pathogens creates an urgent need to develop new antimicrobial agents. Many reported polycations show high antimicrobial activity along with low hemolytic activity. Unfortunately, most of those molecules remain highly cytotoxic against various mammalian cells. In this work, a systematic study on the impact of triethylene glycol monomethyl ether side groups (short polyethylene glycol (PEG) analog) on antimicrobial, hemolytic, and cytotoxic properties of novel amphiphilic ionenes is presented. A detailed description of synthesis, leading to well-defined alternating polymers, which differ in structural elements responsible for hydrophilicity (PEG) and hydrophobicity (alkyl chain), is presented. Obtained results show that the PEG moiety and fine-tuned hydrophilic-lipophilic balance of ionenes synergistically lead to low cytotoxic, low hemolytic molecules with high activity against S. aureus, including methicillin-resistant strains (MRSA). Additionally, the results of mechanistic studies on bacterial cells and fluorescently labeled liposomes are also discussed.

Influence of the length and grafting density of PNIPAM chains on the colloidal and optical properties of quantum dot/PNIPAM assemblies.

Structural and optical characterization of water soluble, thermo-responsive quantum dot/poly(N-isopropyl acrylamide) (QD/PNIPAM) hybrid particles using fluorescence correlation spectroscopy (FCS) and time-correlated single photon counting (TCSPC) measurements performed at temperatures below and above the lower critical solution temperature (LCST) of PNIPAM is reported. By increasing the temperature above the LCST, the signature of the PNIPAM chain collapse covering the QDs is revealed by FCS measurements. Despite the significant structural change, the TCSPC measurements show that the fluorescence lifetimes remain of the same order of magnitude at T > LCST. Such QD/PNIPAM hybrid particles with water solubility and robust thermo-responsive behavior at physiologically relevant temperatures are potentially useful for (bio)molecular sensing and separation applications.

Influence of lipid bilayer composition on the activity of antimicrobial quaternary ammonium ionenes, the interplay of intrinsic lipid curvature and polymer hydrophobicity, the role of cardiolipin.

Incorporation of hydrophobic component into amphiphilic polycations structure is frequently accompanied by an increase of antimicrobial activity. There is, however, a group of relatively hydrophilic polycations containing quaternary ammonium moieties along mainchain, ionenes, which also display strong antimicrobial and limited hemolytic properties. In this work, an influence of a hydrophobic side group length on antimicrobial mechanism of action is investigated in a series of novel amphiphilic ionenes. High antimicrobial activity was found by determination of minimum inhibitory concentration (MIC) and minimum bactericidal, and fungicidal concentration (MBC and MFC) in both growth media and a buffer. Biocompatibility was estimated by hemolytic and mammalian cells viability assays. Mechanistic studies were performed using large unilamellar vesicles (LUVs) with different lipid composition, as simplified models of cell membranes. The investigated ionenes are potent and selective antimicrobial molecules displaying a decrease of antimicrobial activity correlated with increase of hydrophobicity. Studies using LUVs revealed that the cardiolipin is an essential component responsible for the lipid bilayer permeabilization by investigated ionens. In contrast to relatively hydrophilic ionenes, more hydrophobic polymers showed an ability to stabilize membranes composed of lipids with negative spontaneous curvature in a certain range of polymer to lipid ratio. The results substantially contribute to the understanding of antimicrobial activity of the investigated class of polymers.

Hydrophilic Quaternary Ammonium Ionenes-Is There an Influence of Backbone Flexibility and Topology on Antibacterial Properties?

The antimicrobial properties of polycations are strongly affected by the structural features such as the backbone flexibility and topology (isomerism) through the polymer ability to attain proper conformation in interaction with the cell membrane. In this paper, a synthesis and biocidal properties evaluation of ionenes characterized by different backbone topology (isomerism) and flexibility are presented. The findings reveal influence of variation in topology on activity against different microorganisms, and general positive effect of improved flexibility. Furthermore, one of the obtained ionenes displays degradable properties in near physiological environment (phosphate-buffered saline pH 7.4, 37 °C). The degradation proceeds via Hofmann elimination reaction and the products are not of acidic character. For the first time a new class of degradable ionenes with a high antimicrobial potential is presented.

Amphiphilic Polymethyloxazoline-Polyethyleneimine Copolymers: Interaction with Lipid Bilayer and Antibacterial Properties.

Polycations, mimicking activity of antibacterial peptides, belong to an important class of molecules investigated as a support or as an alternative to antibiotics. In this work, studies of modified linear amphiphilic statistical polymethyloxazoline (PMOX) and polyethyleneimine copolymers (PMOX_PEI) series are presented. Variation of PEI content in the structure results in controllable changes of polymeric aggregates zeta potential. The structure with the highest positive charge shows the best antimicrobial activity, well visible in tests against model Gram-positive and Gram-negative bacteria, fungi, and mycobacterium strains. The polymer toxicity is evaluated with MTT and hemolysis assay as a reference. Quartz crystal microbalance (QCM-D) is used to investigate interaction between polycations and a model lipid membrane. Polymer activity correlates well with molecular structure, showing that amphiphilic component is altering polymer behavior in contact with the lipid bilayer.

Stable pH responsive layer-by-layer assemblies of partially hydrolysed poly(2-ethyl-2-oxazoline) and poly(acrylic acid) for effective prevention of protein, cell and bacteria surface attachment.

Polyoxazolines have received increasing attention as low-fouling materials with good stability and ease of functional group incorporation. We investigated layer-by-layer (LbL) assembly of poly(2-ethyl-2-oxazoline) (PEOX) with poly(acrylic acid) (PAA) to incorporate PEOX into thin conformal coatings with controllable thicknesses ranging from the nano- to micron range. Partial hydrolysis of PEOX (to form PEOX-I) was used to introduce secondary amine groups that enable post-assembly multilayer stabilization by heat-induced crosslinking. While as-assembled multilayers dissolve in aqueous solutions at pH 5 and above, thermally crosslinked multilayers were stable against film loss and instead exhibit pH responsive swelling. The anti-fouling properties of crosslinked coatings were assessed by evaluating the resistance of PEOX-I containing multilayers to fouling by proteins, cells and bacteria. Our study of multilayers with thicknesses ranging from ∼12nm to ∼1.5µm revealed thickness dependence of surface fouling resistance to BSA. Crosslinked multilayers of ∼220nm were found to be highly effective in suppressing surface adsorption of bovine serum albumin (BSA), while thinner or thicker layers were increasingly susceptible to BSA adsorption. We further found that coatings of ∼220nm and above were all highly effective at preventing surface attachment of fibroblasts, gram-positive (S. aureus) and gram-negative (E. coli) bacteria.

Tailoring Polyelectrolyte Architecture To Promote Cell Growth and Inhibit Bacterial Adhesion.

An important challenge facing the application of implanted biomaterials for tissue engineering is the need to facilitate desirable tissue interactions with the implant while simultaneously inhibiting bacterial colonization, which can lead to implant-associated infection. In this study, we explore the relevance of the physical parameters of polyelectrolyte multilayers, such as surface charge, wettability, and stiffness, in tissue cell/surface and bacteria/surface interactions, and investigate the tuning of the multilayer architecture to differentially control such interactions. Polyions with different side-chain chemical structures were paired with polyethylenimine to assemble multilayers with parallel control over surface charge and wettability under controlled conditions. The multilayers can be successfully cross-linked to yield stiffer (the apparent Young's modulus was increased more than three times its original value) and more stable films while maintaining parallel control over surface charge and wettability. The initial adhesion and proliferation of 3T3 fibroblast cells were found to be strongly affected by surface charge and wettability on the non-cross-linked multilayers. On the other hand, these cells adhered and proliferated in a manner similar to those on the cross-linked multilayers (apparent Young's modulus ∼2 MPa), regardless of surface charge and wettability. In contrast, Staphylococcus aureus ( S. aureus) and Escherichia coli ( E. coli) adhesion was primarily controlled by surface charge and wettability on both cross-linked and non-cross-linked multilayers. In both cases, negative charge and hydrophilicity inhibited their adhesion. Thus, a surface coating with a relatively high degree of stiffness from covalent cross-linking coupled with negative surface charge and high wettability can serve as an efficient strategy to enhance host cell growth while resisting bacterial colonization.

Effect of Variations in Micropatterns and Surface Modulus on Marine Fouling of Engineering Polymers.

We report on the marine fouling and fouling release effects caused by variations of surface mechanical properties and microtopography of engineering polymers. Polymeric materials were covered with hierarchical micromolded topographical patterns inspired by the shell of the marine decapod crab Myomenippe hardwickii. These micropatterned surfaces were deployed in field static immersion tests. PDMS, polyurethane, and PMMA surfaces with higher elastic modulus and hardness were found to accumulate more fouling and exhibited poor fouling release properties. The results indicate interplay between surface mechanical properties and microtopography on antifouling performance.

Parallel Control over Surface Charge and Wettability Using Polyelectrolyte Architecture: Effect on Protein Adsorption and Cell Adhesion.

Surface charge and wettability, the two prominent physical factors governing protein adsorption and cell adhesion, have been extensively investigated in the literature. However, a comparison between these driving forces in terms of their independent and cooperative effects in affecting adhesion is rarely explored on a systematic and quantitative level. Herein, we formulate a protocol that features two-dimensional control over both surface charge and wettability with limited cross-parameter influence. This strategy is implemented by controlling both the polyion charge density in the layer-by-layer (LbL) assembly process and the polyion side-chain chemical structures. The 2D property matrix spans surface isoelectric points ranging from 5 to 9 and water contact angles from 35 to 70°, with other interferential factors (e.g., roughness) eliminated. The interplay between these two surface variables influences protein (bovine serum albumin, lysozyme) adsorption and 3T3 fibroblast cell adhesion. For proteins, we observe the presence of thresholds for surface wettability and electrostatic driving forces necessary to affect adhesion. Beyond these thresholds, the individual effects of electrostatic forces and wettability are observed. For fibroblast, both surface charge and wettability have an effect on its adhesion. The combined effects of positive charge and hydrophilicity lead to the highest cell adhesion, whereas negative charge and hydrophobicity lead to the lowest cell adhesion. Our design strategy can potentially form the basis for studying the distinct behaviors of electrostatic force or wettability driven interfacial phenomena and serve as a reference in future studies assessing protein adsorption and cell adhesion to surfaces with known charge and wettability within the property range studied here.