Sequential bottom-up assembly of mechanically stabilized synthetic cells by microfluidics.

Compartments for the spatially and temporally controlled assembly of biological processes are essential towards cellular life. Synthetic mimics of cellular compartments based on lipid-based protocells lack the mechanical and chemical stability to allow their manipulation into a complex and fully functional synthetic cell. Here, we present a high-throughput microfluidic method to generate stable, defined sized liposomes termed 'droplet-stabilized giant unilamellar vesicles (dsGUVs)'. The enhanced stability of dsGUVs enables the sequential loading of these compartments with biomolecules, namely purified transmembrane and cytoskeleton proteins by microfluidic pico-injection technology. This constitutes an experimental demonstration of a successful bottom-up assembly of a compartment with contents that would not self-assemble to full functionality when simply mixed together. Following assembly, the stabilizing oil phase and droplet shells are removed to release functional self-supporting protocells to an aqueous phase, enabling them to interact with physiologically relevant matrices.

Reconceptualizing Fluorescence Correlation Spectroscopy for Monitoring and Analyzing Periodically Passing Objects.

Fluorescence correlation spectroscopy (FCS) is a sensitive technique commonly applied for studying the dynamics of nanoscale-labeled objects in solution. Current analysis of FCS data is largely based on the assumption that the labeled objects are stochastically displaced due to Brownian motion. However, this assumption is often invalid for microscale objects, since the motion of these objects is dominated by Stokes drag and settling or rising effects, rather than stochastic Brownian motion. To utilize the power of FCS for systems with nonstochastic displacements of objects, the collection and analysis of FCS data have to be reconceptualized. Here, we extended the applicability of FCS for the detection and analysis of periodically passing objects. Toward this end, we implemented droplet-based microfluidics, in which monodispersed droplets containing fluorescent marker are flowing equally spaced within microchannels. We show by simulations and experiments that FCS can sensitively quantify the flow-rates, variability, and content of rapidly passing droplets. This information can be derived at high temporal resolution, based on the intensity fluctuations generated by only 5-10 passing droplets. Moreover, by utilizing the periodicity of the flowing droplets for noise reduction by averaging, FCS can monitor accurately the droplets flow even if their fluorescence intensity is negligible. Hence, extending FCS for periodically passing objects converts it into a powerful analytical tool for high-throughput droplet-based microfluidics. Moreover, based on the principles described here, FCS can be straightforwardly applied for a variety of systems in which the passing of objects is periodic rather than stochastic.

Key factors for stable retention of fluorophores and labeled biomolecules in droplet-based microfluidics.

Water-in-oil emulsion droplets created in droplet-based microfluidic devices have been tested and used recently as well-defined picoliter-sized 3D compartments for various biochemical and biomedical applications. In many of these applications, fluorescence measurements are applied to reveal the protein content, spatial distribution, and dynamics in the droplets. However, emulsion droplets do not always provide entirely sealed compartments, and partitioning of dyes or labeled molecules to the oil phase is frequently observed. Therefore, stable molecular retention in the droplets represents a challenge, and many physical and chemical key factors of microfluidic system components have to be considered. In this study, we investigated the retention of 12 commonly used water-soluble dyes in droplets having six different aqueous phase conditions. We demonstrate that the physicochemical properties of the dyes have a major influence on the retention level. In particular, hydrophilicity has a strong influence on retention, with highly hydrophilic dyes (LogD < -7) showing stable, buffer/medium independent retention. In the case of less hydrophilic dyes, we showed that retention can be improved by adjusting the surfactants physical properties, such as geometry, length, and concentration. Furthermore, we analyzed the retention stability of labeled biomolecules such as antibodies, streptavidin, and tubulin proteins and showed that stable retention can be strongly dependent on dye and surfactants selection.

Synthesis of nanostructured and biofunctionalized water-in-oil droplets as tools for homing T cells.

Activation, ex vivo expansion of T cells, differentiation into a regulatory subset, and its phenotype-specific high-throughput selection represent major challenges in immunobiology. In part, this is due to the lack of technical means to synthesize suitable 3D extracellular systems to imitate ex vivo the cellular interactions between T cells and antigen-presenting cells (APCs). In this study, we synthesized a new type of gold-linked surfactant and used a drop-based microfluidic device to develop and characterize novel nanostructured and specifically biofunctionalized droplets of water-in-oil emulsions as 3D APC analogues. Combining flexible biofunctionalization with the pliable physical properties of the nanostructured droplets provided this system with superior properties in comparison with previously reported synthetic APC analogues.

Artificial Cytoskeleton Assembly for Synthetic Cell Motility.

Imitation of cellular processes in cell-like compartments is a current research focus in synthetic biology. Here, a method is introduced for assembling an artificial cytoskeleton in a synthetic cell model system based on a poly(N-isopropyl acrylamide) (PNIPAM) composite material. Toward this end, a PNIPAM-based composite material inside water-in-oil droplets that are stabilized with PNIPAM-functionalized and commercial fluorosurfactants is introduced. The temperature-mediated contraction/release behavior of the PNIPAM-based cytoskeleton is investigated. The reversibility of the PNIPAM transition is further examined in bulk and in droplets and it could be shown that hydrogel induced deformation could be used to controllably manipulate droplet-based synthetic cell motility upon temperature changes. It is envisioned that a combination of the presented artificial cytoskeleton with naturally occurring components might expand the bandwidth of the bottom-up synthetic biology.

Microfluidic production and characterization of biofunctionalized giant unilamellar vesicles for targeted intracellular cargo delivery.

Lipid-based vesicles have found widespread applications in the life sciences, allowing for fundamental insights into membrane-based processes in cell biology and as carrier systems for drug delivery purposes. So far, mostly small unilamellar vesicles (SUVs) with diameters of ~100 nm have been applied as carrier systems for biomedical applications. Despite this progress, several systematic limitations have arisen due to SUV dimensions, e.g., the size and total amount of applicable cargo is limited. Giant unilamellar vesicles (GUVs) might offer a pragmatic alternative for efficient cargo delivery. However, due to the lack of reliable high-throughput production technologies for GUV-carrier systems, only little is known about their interaction with cells. Here we present a microfluidic-based mechanical droplet-splitting pipeline for the production of carrier-GUVs with diameters of ~2 µm. The technology developed allows for highly efficient cargo loading and unprecedented control over the biological and physicochemical properties of GUV membranes. By generating differently charged (between -31 and + 28 mV), bioligand-conjugated (e.g. with E-cadherin, NrCam and antibodies) and PEG-conjugated GUVs, we performed a detailed investigation of attractive and repulsive GUV-cell interactions. Fine-tuning of these interactions allowed for targeted cellular GUV delivery. Moreover, we evaluated strategies for intracellular GUV cargo release by lysosomal escape mediated by the pH sensitive lipid DOBAQ, enabling cytoplasmic transmission. The presented GUV delivery technology and the systematic characterization of associated GUV-cell interactions could provide a means for more efficient drug administration and will pave the way for hitherto impossible approaches towards a targeted delivery of advanced cargo such as microparticles, viruses or macromolecular DNA-robots.

Charge-controlled microfluidic formation of lipid-based single- and multicompartment systems.

In this manuscript, we introduce a simple, off-the-shelf approach for the on-demand creation of giant unilamellar vesicles (GUVs) or multicompartment synthetic cell model systems in a high-throughput manner. To achieve this, we use microfluidics to encapsulate small unilamellar vesicles in block-copolymer surfactant-stabilized water-in-oil droplets. By tuning the charge of the inner droplet interface, adsorption of lipids can be either inhibited, leading to multicompartment systems, or induced, leading to the formation of droplet-stabilized GUVs. To control the charge density, we formed droplets using different molar ratios of an uncharged PEG-based fluorosurfactant and a negatively-charged PFPE carboxylic acid fluorosurfactant (Krytox). We systematically studied the transition from a multicompartment system to 3D-supported lipid bilayers as a function of lipid charge and Krytox concentration using confocal fluorescence microscopy, cryo-scanning electron microscopy and interfacial tension measurements. Moreover, we demonstrate a simple method to release GUVs from the surfactant shell and the oil phase into a physiological buffer - providing a remarkably high-yield approach for GUV formation. This widely applicable microfluidics-based technology will increase the scope of GUVs as adaptable cell-like compartments in bottom-up synthetic biology applications and beyond.

Soft/elastic nanopatterned biointerfaces in the service of cell biology.

Engineering of biomimetic interfaces has become a valuable tool for guiding cellular processes such as adhesion, spreading, motility, as well as proliferation, differentiation, and apoptosis. The interaction of cells with the extracellular matrix (ECM) or with other cells is involved in nearly every cellular response in vivo. Recent wide-ranging evidence shows that crosstalk between different environmental stimuli can have a tremendous impact on various cell functions. Therefore, the defined control of these stimuli in vitro can contribute to the understanding of the mechanisms underlying the ability of cells to perform "intelligent" missions like acquiring, processing, and responding to environmental information. This chapter summarizes recently developed nanopatterned biomimetic systems that allow independent control of different stimuli and illustrates their applications in cellular studies. Particular attention is devoted to nanopatterned 2D and 3D artificial ECM systems based on poly(ethylene glycol) materials. These allow independent control over the material elasticity and the nanoscale distribution of bioligands on the surface. In the case of engineering artificial cellular interfaces, additional attention has to be devoted to the critical functions of protein transport regulators, namely the cell membrane and the dynamic actin cytoskeleton; both are essential for the signaling activity of individual proteins and the entire cell.