Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 8 de 8
Filtrar
Mais filtros

Base de dados
Tipo de documento
Assunto da revista
País de afiliação
Intervalo de ano de publicação
1.
J Am Chem Soc ; 137(36): 11820-31, 2015 Sep 16.
Artigo em Inglês | MEDLINE | ID: mdl-26302048

RESUMO

The association constants and enthalpies for the binding of hydrogen bond donors to group 10 transition metal complexes featuring a single fluoride ligand (trans-[Ni(F)(2-C5NF4)(PR3)2], R = Et 1a, Cy 1b, trans-[Pd(F)(4-C5NF4)(PCy3)2] 2, trans-[Pt(F){2-C5NF2H(CF3)}(PCy3)2] 3 and of group 4 difluorides (Cp2MF2, M = Ti 4a, Zr 5a, Hf 6a; Cp*2MF2, M = Ti 4b, Zr 5b, Hf 6b) are reported. These measurements allow placement of these fluoride ligands on the scales of organic H-bond acceptor strength. The H-bond acceptor capability ß (Hunter scale) for the group 10 metal fluorides is far greater (1a 12.1, 1b 9.7, 2 11.6, 3 11.0) than that for group 4 metal fluorides (4a 5.8, 5a 4.7, 6a 4.7, 4b 6.9, 5b 5.6, 6b 5.4), demonstrating that the group 10 fluorides are comparable to the strongest organic H-bond acceptors, such as Me3NO, whereas group 4 fluorides fall in the same range as N-bases aniline through pyridine. Additionally, the measurement of the binding enthalpy of 4-fluorophenol to 1a in carbon tetrachloride (-23.5 ± 0.3 kJ mol(-1)) interlocks our study with Laurence's scale of H-bond basicity of organic molecules. The much greater polarity of group 10 metal fluorides than that of the group 4 metal fluorides is consistent with the importance of pπ-dπ bonding in the latter. The polarity of the group 10 metal fluorides indicates their potential as building blocks for hydrogen-bonded assemblies. The synthesis of trans-[Ni(F){2-C5NF3(NH2)}(PEt3)2], which exhibits an extended chain structure assembled by hydrogen bonds between the amine and metal-fluoride groups, confirms this hypothesis.

2.
Acc Chem Res ; 44(5): 333-48, 2011 May 17.
Artigo em Inglês | MEDLINE | ID: mdl-21410234

RESUMO

In this Account, we describe the transition metal-mediated cleavage of C-F and C-H bonds in fluoroaromatic and fluoroheteroaromatic molecules. The simplest reactions of perfluoroarenes result in C-F oxida tive addition, but C-H activation competes with C-F activation for partially fluorinated molecules. We first consider the reactivity of the fluoroaromatics toward nickel and platinum complexes, but extend to rhenium and rhodium where they give special insight. Sections on spectroscopy and molecular structure are followed by discussions of energetics and mechanism that incorporate experimental and computational results. We highlight special characteristics of the metal-fluorine bond and the influence of the fluorine substituents on energetics and mechanism. Fluoroaromatics reacting at an ML(2) center initially yield η(2)-arene complexes, followed usually by oxidative addition to generate MF(Ar(F))(L)(2) or MH(Ar(F))(L)(2) (M is Ni, Pd, or Pt; L is trialkylphosphine). The outcome of competition between C-F and C-H bond activation is strongly metal dependent and regioselective. When C-H bonds of fluoroaromatics are activated, there is a preference for the remaining C-F bonds to lie ortho to the metal. An unusual feature of metal-fluorine bonds is their response to replacement of nickel by platinum. The Pt-F bonds are weaker than their nickel counterparts; the opposite is true for M-H bonds. Metal-fluorine bonds are sufficiently polar to form M-F···H-X hydrogen bonds and M-F···I-C(6)F(5) halogen bonds. In the competition between C-F and C-H activation, the thermodynamic product is always the metal fluoride, but marked differences emerge between metals in the energetics of C-H activation. In metal-fluoroaryl bonds, ortho-fluorine substituents generally control regioselectivity and make C-H activation more energetically favorable. The role of fluorine substituents in directing C-H activation is traced to their effect on bond energies. Correlations between M-C and H-C bond energies demonstrate that M-C bond energies increase far more on ortho-fluorine substitution than do H-C bonds. Conventional oxidative addition reactions involve a three-center triangular transition state between the carbon, metal, and X, where X is hydrogen or fluorine, but M(d)-F(2p) repulsion raises the activation energies when X is fluorine. Platinum complexes exhibit an alternative set of reactions involving rearrangement of the phosphine and the fluoroaromatics to a metal(alkyl)(fluorophosphine), M(R)(Ar(F))(PR(3))(PR(2)F). In these phosphine-assisted C-F activation reactions, the phosphine is no spectator but rather is intimately involved as a fluorine acceptor. Addition of the C-F bond across the M-PR(3) bond leads to a metallophosphorane four-center transition state; subsequent transfer of the R group to the metal generates the fluorophosphine product. We find evidence that a phosphine-assisted pathway may even be significant in some apparently simple oxidative addition reactions. While transition metal catalysis has revolutionized hydrocarbon chemistry, its impact on fluorocarbon chemistry has been more limited. Recent developments have changed the outlook as catalytic reactions involving C-F or C-H bond activation of fluorocarbons have emerged. The principles established here have several implications for catalysis, including the regioselectivity of C-H activation and the unfavorable energetics of C-F reductive elimination. Palladium-catalyzed C-H arylation is analyzed to illustrate how ortho-fluorine substituents influence thermodynamics, kinetics, and regioselectivity.

3.
J Am Chem Soc ; 133(36): 14338-48, 2011 Sep 14.
Artigo em Inglês | MEDLINE | ID: mdl-21851113

RESUMO

A study is presented of the thermodynamics of the halogen-bonding interaction of C(6)F(5)I with a series of structurally similar group 10 metal fluoride complexes trans-[Ni(F)(2-C(5)NF(4))(PCy(3))(2)] (2), trans-[Pd(F)(4-C(5)NF(4))(PCy(3))(2)] (3), trans-[Pt(F){2-C(5)NF(2)H(CF(3))}(PR(3))(2)] (4a, R = Cy; 4bR = iPr) and trans-[Ni(F){2-C(5)NF(2)H(CF(3))}(PCy(3))(2)] (5a) in toluene solution. (19)F NMR titration experiments are used to determine binding constants, enthalpies and entropies of these interactions (2.4 ≤ K(300) ≤ 5.2; -25 ≤ ΔH(o) ≤ -16 kJ mol(-1); -73 ≤ ΔS(o) ≤ -49 J K(-1) mol(-1)). The data for -ΔH(o) for the halogen bonding follow a trend Ni < Pd < Pt. The fluoropyridyl ligand is shown to have a negligible influence on the thermodynamic data, but the influence of the phosphine ligand is significant. We also show that the value of the spin-spin coupling constant J(PtF) increases substantially with adduct formation. X-ray crystallographic data for Ni complexes 5a and 5c are compared to previously published data for a platinum analogue. We show by experiment and computation that the difference between Pt-X and Ni-X (X = F, C, P) bond lengths is greatest for X = F, consistent with F(2pπ)-Pt(5dπ) repulsive interactions. DFT calculations on the metal fluoride complexes show the very negative electrostatic potential around the fluoride. Calculations of the enthalpy of adduct formation show energies of -18.8 and -22.8 kJ mol(-1) for Ni and Pt complexes of types 5 and 4, respectively, in excellent agreement with experiment.

4.
J Am Chem Soc ; 130(25): 7842-4, 2008 Jun 25.
Artigo em Inglês | MEDLINE | ID: mdl-18507375

RESUMO

The organometallic compound trans-(tetrafluoropyrid-2-yl)bis(triethylphosphine)-fluoronickel(II) (NiF) is shown to serve as a strong hydrogen bond and halogen bond acceptor in solution via intermolecular interactions with the fluoride ligand. The nature of the interactions has been confirmed by multinuclear NMR spectroscopy. Experimental binding constants, enthalpies, and entropies of interaction with hydrogen-bond-donor indole and halogen-bond-donor iodopentafluorobenzene have been determined by 19F NMR titration. In toluene-d8 solution indole forms a 1:1 and 2:1 complex with NiF (K1 = 57.9(3), K2 = 0.58(4)). Interaction enthalpies and entropies are -23.4(2) kJ mol-1 and -44.5(8) J mol-1 K-1, respectively, for the 1:1 complex; -14.8(8) kJ mol-1 and -53(3) J mol-1 K-1, respectively, for the 2:1 complex. In toluene-d8 solution iodopentafluorobenzene forms only a 1:1 complex (K1 = 3.41(9)) with enthalpy and entropy of interaction of -16(1) kJ mol-1 and -42(4) J mol-1 K-1, respectively. A marked solvent effect was observed for the halogen bond interaction. NMR titrations in heptane solution indicated formation of both 1:1 and 2:1 complexes of iodopentafluorobenzene with NiF (K1 = 21.8(2), K2 = 0.22(4)). Interaction enthalpies and entropies are -26(1) kJ mol-1 and -63(4) J mol-1 K-1, respectively, for the 1:1 complex; -21(1) kJ mol-1 and -83(5) J mol-1 K-1, respectively, for the 2:1 complex. There is a paucity of such experimental energetic data particularly for halogen bonds despite substantial structural data. These measurements demonstrate that halogen bonds are competitive with hydrogen bonds as intermolecular interactions and provide a suitable benchmark for theoretical calculations and quantitative input into design efforts in supramolecular chemistry and crystal engineering.

5.
J Am Chem Soc ; 130(13): 4375-85, 2008 Apr 02.
Artigo em Inglês | MEDLINE | ID: mdl-18327937

RESUMO

Experimental and computational studies are reported on half-sandwich rhodium complexes that undergo B-H bond activation with pinacolborane (HBpin = HB(OCMe2CMe2O)). The photochemical reaction of [Rh(eta5-C5H5)(R,R-phospholane)(C2H4)] 3 (phospholane = PhP(CHMeCH2CH2CHMe)) with HBpin generates the boryl hydride in two distinguishable isomers [(SRh)-Rh(eta5-C5H5)(Bpin)(H)(R,R-phospholane)] 5a and [(RRh)-Rh(eta5-C5H5)(Bpin)(H)(R,R-phospholane)] 5b that undergo intramolecular exchange. The presence of a chiral phosphine allowed the determination of the interconversion rates (epimerization) by 1D 1H EXSY spectroscopy in C6D6 solution yielding DeltaH = 83.4 +/- 1.8 kJ mol-1 for conversion of 5a to 5b and 79.1 +/- 1.4 kJ mol-1 for 5b to 5a. Computational analysis yielded gas-phase energy barriers of 96.4 kJ mol-1 determined at the density functional theory (DFT, B3PW91) level for a model with PMe3 and B(OCH2CH2O) ligands; higher level calculations (MPW2PLYP) on an optimized QM/MM(ONIOM) geometry for the full system place the transition state 76.8 kJ mol-1 above the average energy of the two isomers. The calculations indicate that the exchange proceeds via a transition state with a sigma-B-H-bonded borane. The B-H bond lies in a mirror plane containing rhodium and phosphorus. No intermediate with an eta2-B-H ligand is detected either by experiment or calculation. Complex 3 has also been converted to the [Rh(eta5-C5H5)Br2(R,R-phospholane)] (characterized crystallographically) and [Rh(eta5-C5H5)(H)2(R,R-phospholane)]. The latter exhibits two inequivalent hydride resonances that undergo exchange with DeltaH = 101 +/- 2 kJ mol-1. DFT calculations indicate that the boryl hydride complex has a lower exchange barrier than the dihydride complex because of steric hindrance between the phospholane and Bpin ligands in the boryl hydride.

6.
J Am Chem Soc ; 130(46): 15499-511, 2008 Nov 19.
Artigo em Inglês | MEDLINE | ID: mdl-18950168

RESUMO

A survey of computed mechanisms for C-F bond activation at the 4-position of pentafluoropyridine by the model zero-valent bis-phosphine complex, [Pt(PH3)(PH2Me)], reveals three quite distinct pathways leading to square-planar Pt(II) products. Direct oxidative addition leads to cis-[Pt(F)(4-C5NF4)(PH3)(PH2Me)] via a conventional 3-center transition state. This process competes with two different phosphine-assisted mechanisms in which C-F activation involves fluorine transfer to a phosphorus center via novel 4-center transition states. The more accessible of the two phosphine-assisted processes involves concerted transfer of an alkyl group from phosphorus to the metal to give a platinum(alkyl)(fluorophosphine), trans-[Pt(Me)(4-C5NF4)(PH3)(PH2F)], analogues of which have been observed experimentally. The second phosphine-assisted pathway sees fluorine transfer to one of the phosphine ligands with formation of a metastable metallophosphorane intermediate from which either alkyl or fluorine transfer to the metal is possible. Both Pt-fluoride and Pt(alkyl)(fluorophosphine) products are therefore accessible via this route. Our calculations highlight the central role of metallophosphorane species, either as intermediates or transition states, in aromatic C-F bond activation. In addition, the similar computed barriers for all three processes suggest that Pt-fluoride species should be accessible. This is confirmed experimentally by the reaction of [Pt(PR3)2] species (R = isopropyl (iPr), cyclohexyl (Cy), and cyclopentyl (Cyp)) with 2,3,5-trifluoro-4-(trifluoromethyl)pyridine to give cis-[Pt(F){2-C5NHF2(CF3)}(PR3)2]. These species subsequently convert to the trans-isomers, either thermally or photochemically. The crystal structure of cis-[Pt(F){2-C5NHF2(CF3)}(P iPr3)2] shows planar coordination at Pt with r(F-Pt) = 2.029(3) A and P(1)-Pt-P(2) = 109.10(3) degrees. The crystal structure of trans-[Pt(F){2-C5NHF2(CF3)}(PCyp3)2] shows standard square-planar coordination at Pt with r(F-Pt) = 2.040(19) A.

7.
Chem Sci ; 9(15): 3767-3781, 2018 Apr 21.
Artigo em Inglês | MEDLINE | ID: mdl-29780509

RESUMO

The syntheses of three series of complexes designed with self-complementary motifs for formation of halogen bonds between an iodotetrafluorophenyl ligand and a halide ligand at square-planar nickel are reported, allowing structural comparisons of halogen bonding between all four halides C6F4I···X-Ni (X = F, Cl, Br, I). In the series trans-[NiX(2,3,5,6-C6F4I)(PEt3)2] 1pX and trans-[NiX(2,3,4,5-C6F4I)(PEt3)2] (X = F, Cl, Br, I) 1oX, the iodine substituent on the benzene ring was positioned para and ortho to the metal, respectively. The phosphine substituents were varied in the series, trans-[NiX(2,3,5,6-C6F4I)(PEt2Ph)2] (X = F, I) 2pX. Crystal structures were obtained for the complete series 1pX, and for 1oF, 1oCl, 1oI and 2pI. All these complexes exhibited halogen bonds in the solid state, of which 1pF exhibited unique characteristics with a linear chain, the shortest halogen bond d(C6F4I···F-Ni) = 2.655(5) Å and the greatest reduction in halogen bond distance (I···F) compared to the sum of the Bondi van der Waals radii, 23%. The remaining complexes form zig-zag chains of halogen bonds with distances also reduced with respect to the sum of the van der Waals radii. The magnitude of the reductions follow the pattern F > Cl ∼ Br > I, 1pX > 1oX, consistent with the halogen bond strength following the same order. The variation in the I···X-Ni angles is consistent with the anisotropic charge distribution of the halide ligand. The temperature dependence of the X-ray structure of 1pF revealed a reduction in halogen bond distance of 0.055(7) Å on cooling from 240 to 111 K. Comparison of three polymorphs of 1oI shows that the halogen bond geometry may be altered significantly by the crystalline environment. The effect of the halogen bond on the 19F NMR chemical shift in the solid state is demonstrated by comparison of the magic-angle spinning NMR spectra of 1pF and 1oF with that of a complex incapable of halogen bond formation, trans-[NiF(C6F5)(PEt3)2] 3F. Halogen bonding causes deshielding of δiso in the component of the tensor perpendicular to the nickel coordination plane. The results demonstrate the potential of fluoride ligands for formation of halogen bonds in supramolecular structures.

8.
Chem Commun (Camb) ; 50(30): 3914-7, 2014 Apr 18.
Artigo em Inglês | MEDLINE | ID: mdl-24549146

RESUMO

Pt(PCyp3)2 (Cyp = cyclopentyl) undergoes C-O oxidative addition with 2,3,5,6-tetrafluoro-4-methoxypyridine, pentafluoroanisole, 2,3,5,6-tetrafluoroanisole and 2,3,6-trifluoroanisole yielding platinum methyl derivatives. The reactions occur in preference to C-H or C-F activation.

SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA