RESUMO
Hollow-core optical fibers can offer broadband, single mode guidance in the UV-visible-NIR wavelength range, with the potential for low-loss, solarization-free operation, making them desirable and potentially disruptive for a wide range of applications. To achieve this requires the fabrication of fibers with <300nm anti-resonant membranes, which is technically challenging. Here we investigate the underlying fluid dynamics of the fiber fabrication process and demonstrate a new three-stage fabrication approach, capable of delivering long (â¼350m) lengths of fiber with the desired thin-membranes.
RESUMO
By exploiting the excellent short-term phase stability between consecutive pulses from a free-running optical parametric oscillator frequency comb, we report the first example of hollow-core fiber-delivered heterodyne spectroscopy in the 3.1-3.8 µm wavelength range. The technique provides a means of spectroscopically interrogating a sample situated at the distal end of a fiber, with all electronics and light sources situated at the proximal end and with an inherent capability to suppress spectroscopically interfering features present in the free-space and in-fiber delivery path. Using a silica anti-resonant, hollow-core delivery fiber, we demonstrate high quality transmission and attenuated total reflectance spectroscopy of a plastic sample for fiber lengths of up to 40 m, significantly exceeding the few-meter lengths typically possible using solid-core fibers. The technique opens a route to implementing multi-species spectroscopic monitoring in remote and / or hostile industrial environments and medical applications.
RESUMO
This Letter reports the first, to the best of our knowledge, spectral radiation induced attenuation (RIA) measurements of nested anti-resonant nodeless hollow-core fibers (NANFs). A 5-tube NANF, alongside a solid-core single-mode radiation resistant fiber (SM-RRF), was irradiated under γ-ray up to 101â kGy (SiO2) and under x-ray up to 241â kGy (SiO2). No RIA was observed in the NANF in the second half of the O-band, the S-band, the C-band, and the L-band. The NANF showed a reduction of absorption bands associated with water and HCl under irradiation. Three new attenuation peaks were radiolytically induced and are attributed to the creation of HNO3. These peaks are centered respectively at 1441â nm, 1532â nm, and 1628â nm, with a full width at half maximum (FWHM) of, respectively, 10â nm, 12â nm, and 12â nm. These results demonstrate that the wide bandwidth range of NANFs is essentially unaffected by radiation, but the internal gas contents of the NANF must be managed to avoid producing undesirable spectral features through radiolytic reactions. Wide spectral regions almost unaffected by the ionizing radiation could open new possibilities for the use of NANF in harsh radiation environments.
RESUMO
We investigate the design of hollow-core fibers for the delivery of 10s of kilowatt average power from multi-mode laser sources. For such lasers, delivery through solid-core fibers is typically limited by nonlinear optical effects to 10s of meters of distance. Techniques are presented here for the design of multi-mode anti-resonant fibers that can efficiently couple and transmit light from these lasers. By numerical simulation we analyze the performance of two anti-resonant fibers targeting continuous-wave lasers with M2 up to 13 and find they are capable of delivering MW-level power over several kilometers with low leakage loss, and at bend radii as small as 35 cm. Pulsed lasers are also investigated and numerical simulations indicate that optimized fibers could in principle deliver nanosecond pulses with greater than 100 mJ pulse energy over distances up to 1 km. This would be orders of magnitude higher power and longer distances than in typical machining applications using the best available solid core fibers.
RESUMO
High-resolution multi-species spectroscopy is achieved by delivering broadband 3-4-µm mid-infrared light through a 4.5-meter-long silica-based hollow-core optical fiber. Absorptions from H37Cl, H35Cl, H2O and CH4 present in the gas within the fiber core are observed, and the corresponding gas concentrations are obtained to 5-ppb precision using a high-resolution Fourier-transform spectrometer and a full-spectrum multi-species fitting algorithm. We show that by fully fitting the narrow absorption features of these light molecules their contributions can be nulled, enabling further spectroscopy of C3H6O and C3H8O contained in a Herriott cell after the fiber. As a demonstration of the potential to extend fiber-delivered broadband mid-infrared spectroscopy to significant distances, we present a high-resolution characterization of the transmission of a 63-meter length of hollow-core fiber, fully fitting the input and output spectra to obtain the intra-fiber gas concentrations. We show that, despite the fiber not having been purged, useful spectroscopic windows are still preserved which have the potential to enable hydrocarbon spectroscopy at the distal end of fibers with lengths of tens or even hundreds of meters.
RESUMO
We report a high-power single-mode mid-infrared (MIR) pulse delivery system via anti-resonant hollow-core fiber (HCF) with a record delivery distance of 108 m. Near-diffraction-limited MIR light was transmitted by HCFs at wavelengths of 3.12-3.58 µm using a tunable optical parametric oscillator (OPO) as the light source. The HCFs were purged beforehand with argon in order to remove or reduce loss due to parasitic gas absorption (HCl, CO2, etc.). The minimum fiber loss values were 0.05 and 0.24â dB/m at 3.4-3.6 µm and 4.5-4.6 µm, respectively, with the 4.5-4.6 µm loss figure representing, to the best of our knowledge, a new low loss record for a HCF in this spectral region. At a coupling efficiency of â¼70%, average powers of 592â mW and 133â mW were delivered through 5 m and 108 m of HCF, respectively. Assuming the 120-ps duration of the MIR pulses remained constant over the low-dispersion HCF (theoretical maximum: 0.4 ps/nm/km), the corresponding calculated peak powers were 4.9â kW and 1.1â kW.
RESUMO
Resonator fiber optic gyroscope (RFOG) performance has hitherto been limited by nonlinearity, modal impurity, and backscattering in the sensing fibers. The use of hollow-core fiber (HCF) effectively reduces nonlinearity, but the complex interplay among glass and air-guided modes in conventional HCF technologies can severely exacerbate RFOG instability. By employing high-performance nested anti-resonant nodeless fiber, we demonstrate long-term stability in a hollow-fiber RFOG of 0.05 deg/h, nearing the levels required for civil aircraft navigation. This represents a ${{3}} \times$ improvement over any prior hollow-core RFOG and a factor of ${{500}} \times$ over any prior result at integration times longer than 1 h.
RESUMO
Using micro-optic collimator technology, we present compact, low-loss optical interconnection devices for hollow core fibers (HCFs). This approach is one of the key manufacturing platforms for commercially available fiber optic components and most forms of HCFs can readily be incorporated into this platform without the need for any substantial or complicated adaptation or physical deformation of the fiber structure. Furthermore, this technique can provide for very low Fresnel reflection interconnection between solid-core fiber and HCF and in addition provides a hermetic seal for HCFs, which can be a critical issue for many HCF applications. In this paper, several exemplar HCF components are fabricated with low insertion loss (0.5-2 dB), low Fresnel reflection (-45 dB) and high modal purity (>20 dB) using various state-of-the-art HCFs.
RESUMO
We report the first extruded tellurite antiresonant hollow core fibers (HC-ARFs) aimed at the delivery of mid-infrared (Mid-IR) laser radiation. The preform extrusion fabrication process allowed us to obtain preforms with non-touching capillaries in a single step, hence minimizing thermal cycles. The fibers were fabricated from in-house synthetized tellurite glass (containing Zn, Ba and K oxides) and co-drawn with a fluorinated ethylene propylene (FEP) polymer outer layer to improve their mechanical properties and protect the glass from humidity. The fabricated HC-ARFs transmit in the Mid-IR spectral range from 4.9 to 6 µm. We measured losses of â¼8.2, 4.8 and 6.4 dB/m at 5 µm, 5.6 µm and 5.8 µm, respectively in two different fibers. These losses, which are dominated by leakage mostly arising from a non-uniform membrane thickness, represent the lowest attenuation reported for a tellurite-based HC-ARF to date. The fibers present good beam quality and an M2 factor of 1.2. Modelling suggests that by improving the uniformity in the capillary membrane thickness losses down to 0.05 dB/m at 5.4 µm should be possible, making this solution attractive, for example, for beam delivery from a CO laser.
RESUMO
The fabrication of hollow core microstructured fibers is significantly more complex than solid fibers due to the necessity to control the hollow microstructure with high precision during the draw. We present the first model that can recreate tubular anti-resonant hollow core fiber draws, and accurately predict the draw parameters and geometry of the fiber. The model was validated against two different experimental fiber draws and very good agreement was found. We identify a dynamic within the draw process that can lead to a premature and irreversible contact between neighboring capillaries inside the hot zone, and describe mitigating strategies. We then use the model to explore the tolerance of the draw process to unavoidable structural variations within the preform, and to study feasibility and limiting phenomena of increasing the produced yield. We discover that the aspect ratio of the capillaries used in the preform has a direct effect on the uniformity of drawn fibers. Starting from high precision preforms the model predicts that it could be possible to draw 100 km of fiber from a single meter of preform.
RESUMO
The modal content of 7 and 19 cell Kagomé anti resonant hollow core fibers (K-ARF) with hypocycloid core surrounds is experimentally investigated through the spectral and spatial (S2) imaging technique. It is observed that the 7 and 19 cell K-ARF reported here, support 4 and 7 LP mode groups respectively, however the observation that K-ARF support few mode groups is likely to be ubiquitous to 7 and 19 cell K-ARFs. The transmission loss of the higher order modes (HOMs) was measured via S2 and a cutback method. In the 7 cell K-ARF it is found that the LP11 and LP21 modes have approximately 3.6 and 5.7 times the loss of the fundamental mode (FM), respectively. In the 19 cell it is found that the LP11 mode has approximately 2.57 times the loss of the FM, while the LP02 mode has approximately 2.62 times the loss of the FM. Additionally, bend loss in these fibers is studied for the first time using S2 to reveal the effect of bend on modal content. Our measurements demonstrate that K-ARFs support a few mode groups and indicate that the differential loss of the HOMs is not substantially higher than that of the FM, and that bending the fiber does not induce significant inter modal coupling. A study of three different input beam coupling configurations demonstrates increased HOM excitation at output and a non-Gaussian profile of the output beam if poor mode field matching is achieved.
RESUMO
Hollow core photonic band gap fibers have great potential in low latency data transmission and power delivery applications, but they are currently only fabricated in research scale fabrication facilities, with km-scale lengths. To drive cost reduction and volume manufacturing it is essential to be able to upscale the preform size, but before embarking on costly experimental attempts it is useful to apply fluid dynamics models to study how the fiber drawing dynamics would be affected by such a change. In this work we use a fluid dynamics model to virtually draw increasingly longer lengths of the same fiber from preforms of identical length but different diameters. Taking advantage of our fast numerical model we explore the physical dynamics of the draw process. We discover that the draw tension is the key thermodynamic parameter and that an upper length limit exists beyond which undesirable distortions in the microstructure become difficult to control. These mechanisms are identified and possible mitigation methods described which could allow the fabrication of over 200 km fiber from a single preform.
RESUMO
We report a novel approach to reconstruct the cross-sectional profile of fabricated hollow-core photonic bandgap fibers from scanning electron microscope images. Finite element simulations on the reconstructed geometries achieve a remarkable match with the measured transmission window, surface mode position and attenuation. The agreement between estimated scattering loss from surface roughness and measured loss values indicates that structural distortions, in particular the uneven distribution of glass across the thin silica struts on the core boundary, have a strong impact on the loss. This provides insight into the differences between idealized models and fabricated fibers, which could be key to further fiber loss reduction.
RESUMO
We introduce a flexible microscale all-fiber-optic Raman probe which can be embedded into devices to enable operando in situ spectroscopy. The facile-constructed probe is composed of a nested antiresonant nodeless hollow-core fiber combined with an integrated high refractive index barium titanate microlens. Pump laser 785 nm excitation and near-infrared collection are independently characterized, demonstrating an excitation spot of full-width-half-maximum 1.1 µm. Since this is much smaller than the effective collection area, it has the greatest influence on the collected Raman scattering. Our characterization scheme provides a suitable protocol for testing the efficacy of these fiber probes using various combinations of fiber types and microspheres. Raman measurements on a surface-enhanced Raman spectroscopy sample and a copper battery electrode demonstrate the viability of the fiber probe as an alternative to bulk optic Raman microscopes, giving comparable collection to a 10 objective, thus paving the way for operando Raman studies in applications such as lithium battery monitoring.
RESUMO
For over 50 years, pure or doped silica glass optical fibres have been an unrivalled platform for the transmission of laser light and optical data at wavelengths from the visible to the near infra-red. Rayleigh scattering, arising from frozen-in density fluctuations in the glass, fundamentally limits the minimum attenuation of these fibres and hence restricts their application, especially at shorter wavelengths. Guiding light in hollow (air) core fibres offers a potential way to overcome this insurmountable attenuation limit set by the glass's scattering, but requires reduction of all the other loss-inducing mechanisms. Here we report hollow core fibres, of nested antiresonant design, with losses comparable or lower than achievable in solid glass fibres around technologically relevant wavelengths of 660, 850, and 1060 nm. Their lower than Rayleigh scattering loss in an air-guiding structure offers the potential for advances in quantum communications, data transmission, and laser power delivery.