RESUMO
Combined spatial and temporal processing techniques are presented to enhance optical ranging in underwater environments. The performance of underwater light detection and ranging (lidar) is often limited by scattering. Previous work has demonstrated that both hybrid lidar-radar, which temporally modulates the amplitude of light, and optical spatial coherence filtering, which spatially modulates the phase of light, have independently reduced the effects of scattering, improving performance. The combined performance of the processing methods is investigated, and experimental results demonstrate that the combined filtering improves the performance of underwater lidar systems beyond what either method provides independently.
RESUMO
An optical vortex is used to enhance the ranging accuracy of an underwater pulsed laser ranging system. An experiment is conducted whereby an underwater object is illuminated by a pulsed Gaussian beam, and both the object-reflected and scattered light are passed through a diffractive spiral phase plate prior to being imaged at the receiver. An optical vortex is formed from the spatially coherent non-scattered component of the return, providing an effective way to discriminate the desired objected reflected light from the spatially incoherent scatter. Experimental results show that the optical vortex permits a spatially coherent ballistic target return to be more easily discriminated from spatially incoherent forward scattered light up to eight attenuation lengths. The results suggest new optical sensing techniques for underwater imaging or lidar.
RESUMO
The forked grating coupler (FGC) is an optical vortex interface for silicon photonics. Using the structure of a Bragg grating coupler with a calculated forked hologram, the FGC couples optical vortex modes into confined waveguide modes of a photonic integrated circuit. Design methodologies are given, as well as measured performance data from fabricated devices. Data are analyzed with a variety of metrics. The effectiveness of design features are evaluated. Advanced FGC designs are demonstrated with focused forked gratings, allowing feed length to be reduced, and with apodization improving vortex mode fidelity. Some configurations achieve over 25 dB multiplexing crosstalk isolation.
RESUMO
Optical detection and ranging in turbid waters are challenged by the effects of absorption and scattering. In particular, backscatter creates a clutter return, which can mask the presence of weak underwater targets. This work explores the use of independent component analysis (ICA), a statistical signal processing approach, to recover weak targets from strong backscatter in turbid waters using a frequency-modulated continuous-wave optical rangefinder. ICA uses statistical differences between target and backscatter returns to suppress the backscatter return. In laboratory test tank experiments, the use of ICA is observed to improve probability of detection at various turbidities and extend target detection range by four optical attenuation lengths.
RESUMO
Biocatalytic electrodes made of buckypaper were modified with PQQ-dependent glucose dehydrogenase on the anode and with laccase on the cathode and were assembled in a flow biofuel cell filled with serum solution mimicking the human blood circulatory system. The biofuel cell generated an open circuitry voltage, Voc, of ca. 470 mV and a short circuitry current, Isc, of ca. 5 mA (a current density of 0.83 mA cm(-2)). The power generated by the implantable biofuel cell was used to activate a pacemaker connected to the cell via a charge pump and a DC-DC converter interface circuit to adjust the voltage produced by the biofuel cell to the value required by the pacemaker. The voltage-current dependencies were analyzed for the biofuel cell connected to an Ohmic load and to the electronic loads composed of the interface circuit, or the power converter, and the pacemaker to study their operation. The correct pacemaker operation was confirmed using a medical device - an implantable loop recorder. Sustainable operation of the pacemaker was achieved with the system closely mimicking human physiological conditions using a single biofuel cell. This first demonstration of the pacemaker activated by the physiologically produced electrical energy shows promise for future electronic implantable medical devices powered by electricity harvested from the human body.
Assuntos
Fontes de Energia Bioelétrica , Fluxo Sanguíneo Regional , Eletrodos , Glucose 1-Desidrogenase/química , Glucose 1-Desidrogenase/metabolismo , HumanosRESUMO
Malaria, which infected more than 240 million people and killed around six hundred thousand only in 2021, has reclaimed territory after the SARS-CoV-2 pandemic. Together with parasite resistance and a not-yet-optimal vaccine, the need for new approaches has become critical. While earlier, limited, studies have suggested that malaria parasites are affected by electromagnetic energy, the outcomes of this affectation vary and there has not been a study that looks into the mechanism of action behind these responses. In this study, through development and implementation of custom applicators for in vitro experimentation, conditions were generated in which microwave energy (MW) killed more than 90% of the parasites, not by a thermal effect but via a MW energy-induced programmed cell death that does not seem to affect mammalian cell lines. Transmission electron microscopy points to the involvement of the haemozoin-containing food vacuole, which becomes destroyed; while several other experimental approaches demonstrate the involvement of calcium signaling pathways in the resulting effects of exposure to MW. Furthermore, parasites were protected from the effects of MW by calcium channel blockers calmodulin and phosphoinositol. The findings presented here offer a molecular insight into the elusive interactions of oscillating electromagnetic fields with P. falciparum, prove that they are not related to temperature, and present an alternative technology to combat this devastating disease.