Triarylborane-Based Helical Donor-Acceptor Compounds: Synthesis, Photophysical, and Electronic Properties.

The synthesis and characterization of 10-(dimesitylboryl)-N,N-di-p-tolylbenzo[c]phenanthren-4-amine (3-B(Mes)2 -[4]helix-9-N(p-Tol)2 1) and 13-(dimesitylboryl)-N,N-di-p-tolyldibenzo[c,g]phenanthren-8-amine (3-B(Mes)2 -[5]helix-12-N(p-Tol)2 2) are reported herein. Their electrochemical and photophysical properties have been studied experimentally and theoretically. The donor and acceptor-substituted helicene derivatives exhibit moderate fluorescence quantum yields in THF (Φf =0.48 and 0.61 for 1 and 2, respectively), which are higher than unsubstituted ones (Φf =0.18 for [4]helicene; Φf <0.05 for [n]helicenes (n≥5)). In the solid state, the Φf values are higher (Φf =1.00 and 0.55 for 1 and 2, respectively) than those in solution, most likely due to the restrictions of molecular motions. The S1 ←S0 transitions of 1 and 2 are predominately HOMO→LUMO transitions. Upon excitation with UV light, the interplanar angle between the two terminal aryl rings of the [5]helix core of 2 decreases (S1 state compared with S0 state), which is similar to placing a spring under an external force.

Thermal, Catalytic Conversion of Alkanes to Linear Aldehydes and Linear Amines.

Alkanes, the main constituents of petroleum, are attractive feedstocks for producing value-added chemicals. Linear aldehydes and amines are two of the most important building blocks in the chemical industry. To date, there have been no effective methods for directly converting n-alkanes to linear aldehydes and linear amines. Here, we report a molecular dual-catalyst system for production of linear aldehydes via regioselective carbonylation of n-alkanes. The system is comprised of a pincer iridium catalyst for transfer-dehydrogenation of the alkane using t-butylethylene or ethylene as a hydrogen acceptor working sequentially with a rhodium catalyst for olefin isomerization-hydroformylation with syngas. The system exhibits high regioselectivity for linear aldehydes and gives high catalytic turnover numbers when using ethylene as the acceptor. In addition, the direct conversion of light alkanes, n-pentane and n-hexane, to siloxy-terminated alkyl aldehydes through a sequence of Ir/Fe-catalyzed alkane silylation and Ir/Rh-catalyzed alkane carbonylation, is described. Finally, the Ir/Rh dual-catalyst strategy has been successfully applied to regioselective alkane aminomethylation to form linear alkyl amines.

An Agostic Iridium Pincer Complex as a Highly Efficient and Selective Catalyst for Monoisomerization of 1-Alkenes to trans-2-Alkenes.

A unique Ir complex (tBu NCC P)Ir with the pyridine-phosphine pincer as the sole ligand, featuring a dual agostic interaction between the Ir and two σ C-H bonds from a tBu substituent, has been prepared. This complex exhibits exceptionally high activity and excellent regio- and stereoselectivity for monoisomerization of 1-alkenes to trans-2-alkenes with wide functional-group tolerance. Reactions can be performed in neat reactant on a more than 100 gram scale using 0.005 mol % catalyst loadings with turnover numbers up to 19000.

A General and mild catalytic α-alkylation of unactivated esters using alcohols.

Catalytic α-alkylation of esters with primary alcohols is a desirable process because it uses low-toxicity agents and generates water as the by-product. Reported herein is a NCP pincer/Ir catalyst which is highly efficient for α-alkylation of a broad scope of unactivated esters under mild reaction conditions. For the first time, alcohols alkylate unactivated α-substituted acyclic esters, lactones, and even methyl and ethyl acetates. This method can be applied to the synthesis of carboxylic acid derivatives with diverse structures and functional groups, some of which would be impossible to access by conventional enolate alkylations with alkyl halides.

Selective catalytic transfer dehydrogenation of alkanes and heterocycles by an iridium pincer complex.

Catalytic alkane dehydrogenation is a reaction with tremendous potential for application. We describe a highly active PSCOP-pincer iridium catalyst for transfer dehydrogenation of cyclic and linear alkanes. The dehydrogenation of linear alkanes occurs under relatively mild conditions with high regioselectivity for α-olefin formation. In addition, the catalyst system is very effective in the dehydrogenation of heterocycles to form heteroarenes and olefinic products.

Recent advances in visible light-induced C(sp 3)-N bond formation.

Synthetic chemists have long focused on selective C(sp 3)-N bond-forming approaches in response to the high value of this motif in natural products, pharmaceutical agents and functional materials. In recent years, visible light-induced protocols have become an important synthetic platform to promote this transformation under mild reaction conditions. These photo-driven methods rely on converting visible light into chemical energy to generate reactive but controllable radical species. This Review highlights recent advances in this area, mostly after 2014, with an emphasis placed on C(sp 3)-H bond activations, including amination of olefins and carbonyl compounds, and cross-coupling reactions.

General and Selective Metal-Free Radical α-C-H Borylation of Aliphatic Amines.

Despite recent developments, selective C(sp3)-H borylation of feedstock amines remains a formidable challenge. Herein, we have developed a general, mild, and photoinduced transition metal- and strong base-free method for α-C(sp3)-H borylation of amines. This protocol features a regioselective 1,5-hydrogen atom transfer process to access key α-aminoalkyl radical intermediate using commercially available easy-to-install/remove iodobenzoyl radical translocating group. Remarkably, this general, efficient, and operationally simple method allows activation of primary and secondary α-C-H sites of a broad range of acyclic and cyclic amines toward highly regio- and diastereoselective synthesis of valuable α-aminoboronates. Utility of this protocol has been demonstrated by its employment in late-stage borylation of structurally complex amines and formal C-H arylation reaction of amines. Thus, it is expected that this operationally simple, general, and practical method will find broad application in organic synthesis and drug discovery.

Three-Component Visible-Light-Induced Palladium-Catalyzed 1,2-Alkyl Carbamoylation/Cyanation of Alkenes.

A mild visible-light-induced Pd-catalyzed one-pot three-component alkyl-carbamoylation and cyanation of alkenes was developed. This general transformation, which proceeds via the in situ formation of a reactive ketenimine intermediate, allows for a rapid construction of a broad range of valuable amides and nitriles from readily available alkenes, alkyl iodides, and isocyanides. An efficient synthesis of tetrazole and amidine via this approach was also demonstrated.

One- and two-electron reduction of triarylborane-based helical donor-acceptor compounds.

One-electron chemical reduction of 10-(dimesitylboryl)-N,N-di-p-tolylbenzo[c]phenanthrene-4-amine (3-B(Mes)2-[4]helix-9-N(p-Tol)2) 1 and 13-(dimesitylboryl)-N,N-di-p-tolyldibenzo[c,g]phenanthrene-8-amine (3-B(Mes)2-[5]helix-12-N(p-Tol)2) 2 gives rise to monoanions with extensive delocalization over the annulated helicene rings and the boron p z orbital. Two-electron chemical reduction of 1 and 2 produces open-shell biradicaloid dianions with temperature-dependent population of the triplet states due to small singlet-triplet gaps. These results have been confirmed by single-crystal X-ray diffraction, EPR and UV/vis-NIR spectroscopy, and DFT calculations.

Challenges and opportunities for alkane functionalisation using molecular catalysts.

The conversion of vast low-value saturated hydrocarbons into valuable chemicals is of great interest. Thanks to the progression of organometallic and coordination chemistry, transition metal catalysed C sp3-H bond functionalisation has now become a powerful tool for alkane transformations. Specifically, methods for alkane functionalisation include radical initiated C-H functionalisation, carbene/nitrene insertion, and transition metal catalysed C-H bond activation. This perspective provides a systematic and concise overview of each protocol, highlighting the factors that govern regioselectivity in these reactions. The challenges of the existing catalytic tactics and future directions for catalyst development in this field will be presented.

Conversion of alkanes to linear alkylsilanes using an iridium-iron-catalysed tandem dehydrogenation-isomerization-hydrosilylation.

The conversion of inexpensive, saturated hydrocarbon feedstocks into value-added speciality chemicals using regiospecific, catalytic functionalization of alkanes is a major goal of organometallic chemistry. Linear alkylsilanes represent one such speciality chemical-they have a wide range of applications, including release coatings, silicone rubbers and moulding products. Direct, selective, functionalization of alkanes at primary C-H bonds is difficult and, to date, methods for catalytically converting alkanes into linear alkylsilanes are unknown. Here, we report a well-defined, dual-catalyst system for one-pot, two-step alkane silylations. The system comprises a pincer-ligated Ir catalyst for alkane dehydrogenation and an Fe catalyst that effects a subsequent tandem olefin isomerization-hydrosilylation. This method exhibits exclusive regioselectivity for the production of terminally functionalized alkylsilanes. This dual-catalyst strategy has also been applied to regioselective alkane borylations to form linear alkylboronate esters.

Efficient and selective degradation of polyethylenes into liquid fuels and waxes under mild conditions.

Polyethylene (PE) is the largest-volume synthetic polymer, and its chemical inertness makes its degradation by low-energy processes a challenging problem. We report a tandem catalytic cross alkane metathesis method for highly efficient degradation of polyethylenes under mild conditions. With the use of widely available, low-value, short alkanes (for example, petroleum ethers) as cross metathesis partners, different types of polyethylenes with various molecular weights undergo complete conversion into useful liquid fuels and waxes. This method shows excellent selectivity for linear alkane formation, and the degradation product distribution (liquid fuels versus waxes) can be controlled by the catalyst structure and reaction time. In addition, the catalysts are compatible with various polyolefin additives; therefore, common plastic wastes, such as postconsumer polyethylene bottles, bags, and films could be converted into valuable chemical feedstocks without any pretreatment.

Iridium complexes of new NCP pincer ligands: catalytic alkane dehydrogenation and alkene isomerization.

Iridium complexes of novel NCP pincer ligands containing pyridine and phosphinite arms have been synthesized. One Ir complex shows good catalytic activity for alkane dehydrogenation, and all complexes are highly active for olefin isomerization. A combination of the Ir complex and a (PNN)Fe pincer complex catalyzes the formation of linear alkylboronates selectively from internal olefins via sequential olefin isomerization-hydroboration.