Associations of artificial sweetener intake with cardiometabolic disorders and mortality: a population-based study.

Artificial sweeteners are generally used and recommended to alternate added sugar for health promotion. However, the health effects of artificial sweeteners remain unclear. In this study, we included 6371 participants from the National Health and Nutrition Examination Survey with artificial sweetener intake records. Logistic regression and Cox regression were applied to explore the associations between artificial sweeteners and risks of cardiometabolic disorders and mortality. Mendelian randomisation was performed to verify the causal associations. We observed that participants with higher consumption of artificial sweeteners were more likely to be female and older and have above medium socio-economic status. After multivariable adjustment, frequent consumers presented the OR (95 % CI) for hypertension (1·52 (1·29, 1·80)), hypercholesterolaemia (1·28 (1·10, 1·50)), diabetes (3·74 (3·06, 4·57)), obesity (1·52 (1·29, 1·80)), congestive heart failure (1·89 (1·35, 2·62)) and heart attack (1·51 (1·10, 2·04)). Mendelian randomisation confirmed the increased risks of hypertension and type 2 diabetes. Moreover, an increased risk of diabetic mortality was identified in participants who had artificial sweeteners ≥ 1 daily (HR = 2·62 (1·46, 4·69), P = 0·001). Higher consumption of artificial sweeteners is associated with increased risks of cardiometabolic disorders and diabetic mortality. These results suggest that using artificial sweeteners as sugar substitutes may not be beneficial.

Self-Assembly of an Anionic [Cu5I8]3- Supramolecular Cluster Driven by Ion-Pair Interaction and Catalytic Properties.

The rational design and controlling synthesis of an anionic cuprous iodide supramolecular cluster with high nuclearity through noncovalent interactions remains a significant challenge. Herein, a cationic organic ligand (L1)3+ was driven by anion-cation ion-pair electrostatic interaction to induce free cuprous iodide to aggregate into an anionic supramolecular cluster, [(Cu5I8)3-(L1)3+] (C1). Moreover, five copper(I) atoms bind with eight iodides through multiply bridged Cu-I bonds associated with intramolecular cuprophilic interactions in this butterfly-shaped cluster core. Supramolecular cluster C1 exhibited a solid-state emission at 380 nm and an emission at 405 nm in acetonitrile at room temperature, respectively. Interestingly, this unprecedented cuprous iodide cluster demonstrated a good catalytic performance for azide-alkyne cycloaddition reaction (CuAAC) and the catalytic yield can be up to 80% for eight different substrates at 80 °C. Furthermore, the density functional theory (DFT) calculation revealed that the thermodynamic-dependent cycloaddition reaction underwent a four-step pathway with an overall energy barrier of -43.6 kcal mol-1 on the basis of intermediates monitored by mass spectrum.

Self-Assembly of Mechanoluminochromic Ladder-Shaped Gold(I) Clusters Promoted Using Cooperative Aurophilicity.

The self-assembly of mechanoluminochromic polynuclear gold(I) complexes has attracted more and more attention in the field of supramolecular gold(I) chemistry. In this work, we adopted a stepwise self-assembly strategy to precisely synthesize two polynuclear gold(I) supramolecular clusters. Through cooperative AuI···AuI and Au-N interactions, the gold(I) clusters 1+•BF4- and 24+•4BF4- with Au4 and Au16 cores, respectively, were successfully constructed. In these supramolecular clusters, (dppm)Au2Cl2 coordination motifs and trithiocyanuric linkers were stepwise assembled via sequential thiolate-chloride/phosphine coordination substitution and Au-S/Au-N coordination bond rearrangement. Two well-defined gold(I) supramolecular clusters displayed intense emission both in the solid state and in solution. Furthermore, the ladder-shaped cluster 24+•4BF4- exhibited reversible mechanochromic luminescence behavior in the solid state as well as aggregation-caused redshifted emission in solution. Upon mechanical grinding, the emission of the cluster 24+•4BF4- changed from yellow at 582 nm to red at 612 nm. The initial emission could be fully recovered by treatment with acetonitrile.

[Rainwater harvesting effect of biocrusted soil-surfaces and the key influencing factors in the hilly region of Chinese Loess Plateau]. / é»„åœŸä¸˜é™µåŒºç”Ÿç‰©ç»“çš®é›†é›¨é¢çš„é›†é›¨æ•ˆæžœåŠå ¶å ³é”®å½±å“å› å­.

In the hilly region of Chinese Loess Plateau, rainwater harvesting is a common ecological engineering measure utilized to reduce soil erosion and amplify the efficiency of water resource utilization. However, the effects on rainwater harvesting and the chief influencing factors of biocrusts as a potential material are unclear. In this study, we conducted a field simulation experiment with intensities of 40, 60, 80, and 100 mm·h-1 between bare soil and biocrusts developed in aeolian soils, with bare soil as a control to explore the differences of the initial abstraction time, cumulative rainfall amount, and rainfall harvesting efficiency. We further analyzed the influencing factors of the rainwater harvesting effect. The results showed that the biocrusted soil-surfaces significantly decreased the initial abstraction time. When compared with the cyano biocrusts and bare soil, the reduction of the initial abstraction time of moss biocrusts was decreased by 49.7%-77.5% and 89.7%-110.0% when the rainfall intensities ranged from 40 to 100 mm·h-1 and the slope was 40°. In addition, biocrusted soil surfaces significantly increased the cumulative rainfall amount and rainfall harvesting efficiency. These differences were considerable amongst the dissimilar surface cover types. In comparison to bare soil, when the rainfall intensity was 100 mm·h-1 and the slope was 40°, the cumulative rainfall harvesting efficiency of moss and cyano biocrusts was increased by 29.6% and 7.8%, respectively. Both moss and cyano biocrusts increased rainfall harvesting efficiency of 25.7% and 6.8%, respectively. Variance analysis demonstrated that the rainfall harvesting efficiency was appreciably affected by surface cover type, slope, and rainfall intensity. The interaction between these factors was considerable except for slope and rainfall intensity. Additionally, important considerations for the actual construction included slope length, slope, and biocrust cultivation. In conclusion, biocrusted soil-surfaces have a high rainfall harvesting efficiency, but moss biocrusts have a much greater rain-collecting effect that improves even more as the slope and intensity of the rain increases.

Progression from cardiomyopathy to heart failure with reduced ejection fraction: A CORIN deficient course.

Cardiomyopathies, encompassing hypertrophic cardiomyopathy (HCM) and dilated cardiomyopathy (DCM), constitute a diverse spectrum of heart muscle diseases that often culminating in heart failure (HF). The inherent molecular heterogeneity of these conditions has implications for prognosis and therapeutic strategies. Publicly available microarray and RNA sequencing (RNA-seq) data sets of HCM (n = 106 from GSE36961) and DCM (n = 18 from GSE135055 and 166 from GSE141910) patients were employed for our analysis. The Non-negative Matrix Factorization (NMF) algorithm was applied to explore the molecular stratification within HCM and DCM, and enrichment analysis was performed to delineate their biological characteristics. By integrating bulk and single-nucleus RNA-seq (snRNA-seq) data, we identified a potential biomarker for HCM progression and cardiac fibrosis, which was subsequently validated using mendelian randomization and in vitro. Our application of NMF identified two distinct molecular clusters. Particularly, a profibrotic, heart failure with reduced ejection fraction (HFrEF)-resembling Cluster 1 emerged, characterized by diminished expression of CORIN and a high degree of fibroblast activation. This cluster also exhibited lower left ventricular ejection fraction (LVEF) and worse prognostic outcomes, establishing the significance of this molecular subclassification. We further found that overexpression of CORIN could mitigate TGFß1-induced expression of col1a1 and α-SMA in neonatal rat cardiac fibroblasts. Our results indicated the heterogeneity of HCM population, and further evidenced the participation of corin in the progression of HCM, DCM and HFrEF. Nevertheless, our study is constrained by the lack of corresponding clinical data and experimental validation of the identified subtypes. Therefore, further studies are warranted to elucidate the downstream pathways of corin and to validate these findings in independent patient cohorts.

Hydrogen attenuates ischaemia-reperfusion injury in skeletal muscles post-limb replantation by activating the NRF2/HO-1 signalling pathway to reduce BAX expression.

Background: Ischaemia-reperfusion injury (IRI) is a critical complication post-limb replantation. The oxidative stress and cellular apoptosis due to IRI considerably hinder the healing process. This study aimed to investigate the modulatory effects of pre-perfusion with hydrogen-rich heparin sodium on the nuclear factor erythroid 2-related factor 2 (NRF2)/haeme oxygenase-1 (HO-1) pathway and its potential mechanisms in mitigating skeletal muscle IRI post-limb replantation. Methods: Forty healthy Sprague-Dawley rats (250-300 g) were classified into five groups (n = 8 each): normal control, IRI + heparin sodium pre-perfusion (heparin group), IRI + hydrogen-rich heparin sodium pre-perfusion (hydrogen-rich heparin group), IRI + hydrogen-rich heparin sodium pre-perfusion + NRF2 inhibitor (hydrogen-rich heparin + all-trans retinoic acid [ATRA] group), and IRI + heparin sodium pre-perfusion + NRF2 inhibitor (heparin + ATRA group). The activation of the NRF2/HO-1 pathway in skeletal muscle IRI was evaluated based on HO-1 expression using western blotting and immunofluorescence. Furthermore, haematoxylin and eosin staining and transmission electron microscopy were employed to determine the histopathological characteristics. Additionally, superoxide dismutase and malondialdehyde levels in skeletal muscle tissue were measured to assess antioxidant capacity and the degree of oxidative stress damage. Tissue hypoxia was assessed based on hypoxia-inducible factor 1-alpha expression, whereas apoptosis markers BCL-2-associated X protein (BAX) and Caspase-3 in skeletal muscle tissues were analysed using western blotting with terminal deoxynucleotidyl transferase dUTP nick end labelling staining to quantify cell apoptosis. Results: Compared with the control group, the heparin group exhibited significant pathological changes, including inflammatory infiltration and cellular hypertrophy, with increased apoptosis and oxidative stress. Notably, NRF2 suppression aggravated these effects. However, hydrogen-rich heparin sodium prominently activated the NRF2/HO-1 pathway, enhancing antioxidant defence and reducing BAX/Caspase-3-mediated apoptosis, thereby mitigating IRI-induced damage. The use of an NRF2 inhibitor to inhibit NRF2 excitation by hydrogen-rich heparin sodium notably weakened NRF2 activation and the antioxidant response, resulting in a substantial increase in cellular apoptosis. Conclusion: Pre-perfusion with hydrogen-rich heparin sodium markedly diminishes the BAX/Caspase-3-mediated apoptotic pathway in skeletal muscle tissues with IRI through the excitation of the NRF2/HO-1 pathway.

[Responses of moss biocrusts respiration to simulated grazing and trampling disturbance with different intensities on the fenced forestland of Loess Plateau, China]. / 黄土高原封禁林地藓结皮呼吸速率对放牧踩踏干扰强度的响应.

The changes in soil properties caused by grazing and trampling are important reasons for the changes in soil respiration rates, carbon fixation, and emission. However, the effects of different intensities of grazing and trampling on biocrusts respiration rate are unclear. In this study, we simulated grazing and trampling disturbances of 10%, 30%, 50%, and 70% intensity on moss biocrusts developed in aeolian sandy soil on Loess Plateau, with undisturbed moss biocrusts serving as a control. The changes in respiration rate of moss biocrusts were monitored continuously, and its responses to different disturbance intensities were analyzed. The results showed that: 1) moderate disturbance stimulated moss biocrusts respiration, while heavy disturbance inhibited that. The respiration rate of moss biocrusts was increased by 41.1% and 22.2% at disturbance intensities of 10% and 30%, but was decreased by 8.9% and 15.3% at disturbance intensities of 50% and 70%, respectively. 2) The trampling disturbance significantly changed soil temperature but did not affect soil water content. In comparison to the control, soil temperature of biocrusts was decreased by 0.4 and 1.2 ℃ at disturbance intensities of 10% and 30%, but it was increased by 1.1 and 1.0 ℃ at disturbance intensities of 50% and 70%, respectively. 3) The respiration rate of moss biocrusts showed a significant exponential relationship with soil temperature and a linear positive relationship with soil water content under different disturbance intensities. However, the correlation between respiration rate of moss biocrust and the characteristics of moss biocrust was not significant. Soil temperature and water content could explain 70.6%-96.3% and 49.1%-70.0% of the total variation of respiration rate of moss biocrusts, respectively. In conclusion, grazing and trampling affected the respiration rate of moss biocrusts, with short-term moderate grazing and trampling would have positive effects. On the other hand, excessive grazing and trampling would reduce the rate of moss biocrust respiration. As a result, future studies on soil carbon balance of the Loess Plateau should consider the effects of grazing and trampling on biocrust respiration.

Superhydrophobic Porous Coating of Polymer Composite for Scalable and Durable Daytime Radiative Cooling.

Passive daytime radiative cooling (PDRC) technology provides an eco-friendly cooling strategy by reflecting sunlight reaching the surface and radiating heat underneath to the outer space through the atmospheric transparency window. However, PDRC materials face challenges in cooling performance degradation caused by outdoor contamination and requirements of easy fabrication approaches for scale-up and high cooling efficiency. Herein, a polymer composite coating of polystyrene, polydimethylsiloxane and poly(ethyl cyanoacrylate) (PS/PDMS/PECA) with superhydrophobicity and radiative cooling performance was fabricated and demonstrated to have sustained radiative cooling capability, utilizing the superhydrophobic self-cleaning property to maintain the optical properties of the coating surface. The prepared coating is hierarchically porous which exhibits an average solar reflectance of 96% with an average emissivity of 95% and superhydrophobicity with a contact angle of 160°. The coating realized a subambient radiative cooling of 12.9 °C in sealed air and 7.5 °C in open air. The self-cleaning property of the PS/PDMS/PECA coating helped sustain the cooling capacity for long-term outdoor applications. Moreover, the coating exhibited chemical resistance, UV resistance, and mechanical durability, which has promising applications in wider fields.