Effect of genetic polymorphisms in UDP-glucuronosyltransferase 1A6 (UGT1A6) on acetylsalicylic acid metabolism in healthy female volunteers.

OBJECTIVE: To compare plasma concentrations of acetylsalicylic acid (ASA) and its metabolites between genetic polymorphisms in the gene encoding for UDP-glucuronosyltransferase 1A6 (UGT1A6), an enzyme involved in ASA metabolism. METHODS: Five UGT1A6*1 and 4 UGT1A6*2 homozygote females were given 320 mg ASA once daily for 8 days. During the first and last day of treatment, several blood samples were taken over a 10-hour time period and analyzed for plasma levels of ASA and its main metabolites salicylic acid (SA) and salicyluric acid (SUA), using a validated HPLC method. The pharmacokinetic data were assessed with the Time Constant Approach and both genotypes were compared using the Mann-Whitney U test. RESULTS: ASA and SUA showed similar pharmacokinetic parameters in the two UGT1A6 genotypes. However, pharmacokinetic parameters for SA differed significantly: the mean area under the pharmacokinetic curve for the UGT1A6*1 and UGT1A6*2 homozygotes was 136 and 94 microg/ml.h (p = 0.04), and median C(max) was 23 and 17 microg/ml (p = 0.01), respectively. CONCLUSION: In females receiving ASA, the presence of the UGT1A6*2 compared to the UGT1A6*1 homozygote genotype is associated with lower plasma levels of SA, indicating faster pharmacokinetics.

Influence of crystal hydration on the mechanical properties of sodium naproxen.

The aim of this work is to establish a correlation between water uptake by anhydrous sodium naproxen (ASN) at two different relative humidities and modifications in tableting and densification behaviour under hydration. Water uptake was evaluated at different relative humidities. Models for the hydration kinetics of ASN at 55% and 86%, corresponding to the formation of the dihydrated and tetrahydrated forms, respectively, were evaluated assuming Eyring's dependence on temperature. Tabletability, compressibility, compactibility, and densification behaviour were determined using an instrumented single punch tablet machine. Kinetic data are consistent with a model where water molecules enter the crystal preferentially along hydrophilic tunnels existing in the crystal structure and corresponding to the propionate side chain. Water inclusion perturbs the crystallographic structure, causing slight structural changes according to the amount and associated to an increase in entropy. The interposition of water molecules between sodium naproxen molecules weakens intermolecular bonds, and these sites can behave like sliding planes under compression. Such structural changes may explain the improved compression behaviour and modified densification propensity mechanism. Kinetic data describing the water hydration mechanism of ASN explain in an original way the improved tableting and densification properties under hydration.

P-glycoprotein and cytochrome P450 3A4 involvement in risperidone transport using an in vitro Caco-2/TC7 model and an in vivo model.

The possible involvement of P-glycoprotein (P-gp) and cytochrome P450 (CYP) 3A4 in risperidone transport was investigated using in vitro and in vivo models. Firstly, uptake studies were performed on a Caco-2/TC7 cell monolayer; the effects of 1 microg ml(-1) risperidone on apparent permeability were determined for secretory and absorptive directions, in the presence or absence of various P-gp and CYP3A4 inhibitors (verapamil, ketoconazole, erythromycin), and of an associated multidrug-resistant protein inhibitor (indomethacin). Secondly, on a conscious rat model, risperidone pharmacokinetic parameters, notably absorption parameters, were determined using compartmental and deconvolution methods. Three groups of seven rats received respectively an IV risperidone dose, an oral risperidone dose (PO group) and the same oral risperidone dose after verapamil administration (POV group). No formation of 9-hydroxyrisperidone was observed on Caco-2 cells after risperidone administration; there was no evidence that intestinal CYP3A4 is involved in risperidone metabolising. Risperidone secretory permeation was higher than absorptive permeation. Verapamil increased risperidone absorption permeation and decreased its secretory permeation. Indomethacin did not modify these permeation values. In rats, verapamil led to an increase in both risperidone and 9-hydroxyrisperidone plasmatic concentrations. The fraction absorbed in the verapamil group was 3.18 times higher than in the oral group (65.9% and 20.7% for POV group and PO group). The absorption rate constant was lower in the verapamil group. Our results indicate that P-gp decreases the intestinal absorption of risperidone and that intestinal CYP3A4 is not involved in risperidone metabolism.

A new tetrahydrated form of sodium naproxen.

The anhydrous sodium naproxen (ASN) can form several hydrated phases if maintained at different relative humidities (RH). The water uptake can promote crystallographic modifications, according to the amount of water. In a previous work, the authors showed that a dihydrated form could be obtained either by crystallization in water or by exposure of the anhydrous form to a RH of 55%. In the present work, the authors report about the formation and characterization of a new tetrahydrated form, obtained by exposing the ASN to RH >or= 75%. All the hydrated compounds were characterized by the combined use of several spectroscopic, thermal, and crystallographic techniques. The thermal stability of both the dihydrated and tetrahydrated compounds was also tested.

Characterization and compaction behaviour of nimesulide crystal forms.

Nimesulide is a typical nonsteroidal anti-inflammatory drug (NSAID), widely used in solid oral formulations. By crystallizing nimesulide from an ethanol solution a crystalline form was obtained, different from the reference sample, as confirmed by X-ray powder diffraction (XRPD), Differential Scanning Calorimetry (DSC) and solid cross polarization-magic angle spinning ((13)C-CPMAS) NMR. Moreover, when crystallized from dioxane nimesulide forms a solvate. The solvate was characterized by XRPD, IR-spectrometry, DSC, thermo-gravimetric analysis (TGA) and by (13)C-CPMAS NMR. In particular, through this technique, the presence of several conformational isomers was demonstrated. In addition to the physico-chemical characterization, the technological properties of nimesulide, namely densification and tableting, were evaluated. Contrarily to the other forms that are affected by capping phenomena at increasing compression pressures, the form obtained by desolvation of dioxane solvate has positive effect on tableting properties, increasing both compressibility and tabletability of nimesulide.

Differences between eccentric and rotary tablet machines in the evaluation of powder densification behaviour.

Differences in the dynamics of powder densification between eccentric and rotary machine were pointed out by compressing at different compression pressures microcrystalline cellulose, lactose monohydrate and dicalcium phosphate dihydrate and recovering the corresponding stress/strain data in both machines equipped to monitor punches displacement and compression forces. Heckel plots were then obtained from these stress/strain data. Curves obtained in the rotary machine possess a narrower zone of linearity for the calculation of P(Y) and D(A). The effect of the different compression mechanism of the rotary machine on the shape of the Heckel plot is more noticeable in a non-deforming material such as dicalcium phosphate. The effect of the longer dwell time of the rotary machine on the porosity reduction occurring after the maximum pressure has been reached, is more noticeable in a ductile material such as microcrystalline cellulose. Heckel parameters obtained in the rotary press are in some cases different from those recovered in the eccentric machine because of the longer dwell time, machine deflection and punch tilting occurring in the rotary machine, although theoretically they could better describe the material densification in a high speed production rotary machine.

Particle interaction of lubricated or unlubricated binary mixtures according to their particle size and densification mechanism.

The aim of this study is to assess an experimental approach for technological development of a direct compression formulation. A simple formula was considered composed by an active ingredient, a diluent and a lubricant. The active ingredient and diluent were selected as an example according to their typical densification mechanism: the nitrofurantoine, a fragmenting material, and the cellulose microcrystalline (Vivapur), which is a typical visco-elastic material, equally displaying good bind and disintegrant properties. For each ingredient, samples of different particle size distribution were selected. Initially, tabletability of pure materials was studied by a rotary press without magnesium stearate. Vivapur tabletability decreases with increase in particle size. The addition of magnesium stearate as lubricant decreases tabletability of Vivapur of greater particle size, while it kept unmodified that of Vivapur of lower particle size. Differences in tabletability can be related to differences in particle-particle interactions; for Vivapur of higher particle size (Vivapur 200, 102 and 101), the lower surface area develops lower surface available for bonds, while for Vivapur of lower particle size (99 and 105) the greater surface area allows high particle proximity favouring particle cohesivity. Nitrofurantoine shows great differences in compression behaviour according to its particle size distribution. Large crystals show poorer tabletability than fine crystals, further decreased by lubricant addition. The large crystals poor tabletability is due to their poor compactibility, in spite of high compressibility and plastic intrinsic deformability; in fact, in spite of the high densification tendency, the nature of the involved bonds is very weak. Nitrofurantoine samples were then mixed with Vivapurs in different proportions. Compression behaviour of binary mixes (tabletability and compressibility) was then evaluated according to diluents proportion in the mixes. The mix of either nitrofurantoine large crystals or fine crystals with cellulose microcrystalline showed a negative interaction in all proportions, whatever particle sizes. The lubricant addition induced a positive interaction with Vivapur of greater particle size distribution (200, 102 and 101) favouring higher particle adhesivity, while it maintained unaltered that of Vivapurs of lower particle size (105 and 99). Definitely, when cohesive forces are predominant (Vivapur 105 and 99), the establishment of adhesive bonds between nitrofurantoine and Vivapur remain unnoticed; on the contrary, when cohesion bonds between microcrystalline cellulose particles are weakened by the presence of magnesium stearate, the existence of adhesion bonds between particles of different nature is in evidence, leading to a positive interaction.

The role of several l-HPCs in preventing tablet capping during direct compression of metronidazole.

Several low-hydroxypropyl cellulose (l-HPC) derivatives (LH-11, 21, 22, 31, and 32) differing in granulometric particle size or in hydroxypropyl content were considered in the present study. The l-HPC grades were characterized as pure powders, in order to determine both compression and densification behavior, in presence or in absence of magnesium stearate as lubricant, and then, were physically mixed in different proportions with metronidazole, which was also previously characterized as pure powder. The tabletability and compressibility of these binary mixtures were then evaluated, in presence or in absence magnesium stearate as lubricant at two different compression speeds (20 and 70 mm/sec). It was observed that both binary mixture compression behavior and capping tendency were influenced by compression speed and by the presence of lubricant. Differences in anti-capping efficiency between the l-HPCs may be related to their hydroxypropyl content. This parameter influences the interaction between the metronidazole and the polymer particles, and consequently the ability of the binary system to undergo densification under compression.

Influence of metronidazole particle properties on granules prepared in a high-shear mixer-granulator.

Metronidazole is a good example of high-dose drug substance with poor granulating and tableting properties. Tablets are generally produced by liquid granulation; however, the technological process failure is quite frequent. In order to verify how the metronidazole particle characteristics can influence granule properties, three metronidazole batches differing for crystal habit, mean particle size, BET surface area and wettability were selected, primarily designed according to their different elongation ratio: needle-shaped, stick-shaped, and isodimensional. In the presence of lactose monohydrate and pregelatinized maize starch, respectively as diluent and binder, they were included in a formula for wet granulation in a high-shear mixer-granulator. In order to render the process comparable as far as possible, all parameters and experimental conditions were maintained constant. Four granule batches were obtained: granules from placebo (G-placebo), granules from needle-shaped crystals (G-needle-shaped), granules from stick-shaped crystals (G-stick-shaped), and granules from isodimensional crystals (G-isodimensional). Different granule properties were considered, in particular concerning porosity, friability, loss on drying (LOD), and flowability. In order to study their tabletability and compressibility, the different granules obtained were then compressed in a rotary press. The best tabletability was obtained with the isodimensional batch, while the poorest was exhibited by the stick-shaped one. Differences in tabletability are in good accordance with compressibility results: to a better tabletability corresponds an important granule ability to undergo a volume reduction as a result of an applied pressure. In particular, it was proposed that the greatest compressibility of the G-isodimensional must be related to the greatest granule porosity percentage.