A Cross-Sectional and Longitudinal Analysis of Pre-Diagnostic Blood Plasma Biomarkers for Early Detection of Pancreatic Cancer.

Pancreatic ductal adenocarcinoma (PDAC) is a major cause of cancer death that typically presents at an advanced stage. No reliable markers for early detection presently exist. The prominent tumor stroma represents a source of circulating biomarkers for use together with cancer cell-derived biomarkers for earlier PDAC diagnosis. CA19-9 and CEA (cancer cell-derived biomarkers), together with endostatin and collagen IV (stroma-derived) were examined alone, or together, by multivariable modelling, using pre-diagnostic plasma samples (n = 259 samples) from the Northern Sweden Health and Disease Study biobank. Serial samples were available for a subgroup of future patients. Marker efficacy for future PDAC case prediction (n = 154 future cases) was examined by both cross-sectional (ROC analysis) and longitudinal analyses. CA19-9 performed well at, and within, six months to diagnosis and multivariable modelling was not superior to CA19-9 alone in cross-sectional analysis. Within six months to diagnosis, CA19-9 (AUC = 0.92) outperformed the multivariable model (AUC = 0.81) at a cross-sectional level. At diagnosis, CA19-9 (AUC = 0.995) and the model (AUC = 0.977) performed similarly. Longitudinal analysis revealed increases in CA19-9 up to two years to diagnosis which indicates a window of opportunity for early detection of PDAC.

Metabolic response patterns in brain microdialysis fluids and serum during interstitial cisplatin treatment of high-grade glioma.

BACKGROUND: High-grade gliomas are associated with poor prognosis. Tumour heterogeneity and invasiveness create challenges for effective treatment and use of systemically administrated drugs. Furthermore, lack of functional predictive response-assays based on drug efficacy complicates evaluation of early treatment responses. METHODS: We used microdialysis to deliver cisplatin into the tumour and to monitor levels of metabolic compounds present in the tumour and non-malignant brain tissue adjacent to tumour, before and during treatment. In parallel, we collected serum samples and used multivariate statistics to analyse the metabolic effects. RESULTS: We found distinct metabolic patterns in the extracellular fluids from tumour compared to non-malignant brain tissue, including high concentrations of a wide range of amino acids, amino acid derivatives and reduced levels of monosaccharides and purine nucleosides. We found that locoregional cisplatin delivery had a strong metabolic effect at the tumour site, resulting in substantial release of glutamic acid, phosphate, and spermidine and a reduction of cysteine levels. In addition, patients with long-time survival displayed different treatment response patterns in both tumour and serum. Longer survival was associated with low tumour levels of lactic acid, glyceric acid, ketoses, creatinine and cysteine. Patients with longer survival displayed lower serum levels of ketohexoses, fatty acid methyl esters, glycerol-3-phosphate and alpha-tocopherol, while elevated phosphate levels were seen in both tumour and serum during treatment. CONCLUSION: We highlight distinct metabolic patterns associated with high-grade tumour metabolism, and responses to cytotoxic cisplatin treatment.

Plasma Micro-RNA Alterations Appear Late in Pancreatic Cancer.

OBJECTIVES: The aim of this research was to study whether plasma microRNAs (miRNA) can be used for early detection of pancreatic cancer (PC) by analyzing prediagnostic plasma samples collected before a PC diagnosis. BACKGROUND: PC has a poor prognosis due to late presenting symptoms and early metastasis. Circulating miRNAs are altered in PC at diagnosis but have not been evaluated in a prediagnostic setting. METHODS: We first performed an initial screen using a panel of 372 miRNAs in a retrospective case-control cohort that included early-stage PC patients and healthy controls. Significantly altered miRNAs at diagnosis were then measured in an early detection case-control cohort wherein plasma samples in the cases are collected before a PC diagnosis. Carbohydrate antigen 19-9 (Ca 19-9) levels were measured in all samples for comparison. RESULTS: Our initial screen, including 23 stage I-II PC cases and 22 controls, revealed 15 candidate miRNAs that were differentially expressed in plasma samples at PC diagnosis. We combined all 15 miRNAs into a multivariate statistical model, which outperformed Ca 19-9 in receiver-operating characteristics analysis. However, none of the candidate miRNAs, individually or in combination, were significantly altered in prediagnostic plasma samples from 67 future PC patients compared with 132 matched controls. In comparison, Ca 19-9 levels were significantly higher in the cases at <5 years before diagnosis. CONCLUSION: Plasma miRNAs are altered in PC patients at diagnosis, but the candidate miRNAs found in this study appear late in the course of the disease and cannot be used for early detection of the disease.

Extensive size variability of the GGGGCC expansion in C9orf72 in both neuronal and non-neuronal tissues in 18 patients with ALS or FTD.

A GGGGCC-repeat expansion in C9orf72 is the most common genetic cause of amyotrophic lateral sclerosis (ALS) and frontotemporal dementia (FTD) among Caucasians. However, little is known about the variability of the GGGGCC expansion in different tissues and whether this correlates with the observed phenotype. Here, we used Southern blotting to estimate the size of hexanucleotide expansions in C9orf72 in neural and non-neural tissues from 18 autopsied ALS and FTD patients with repeat expansion in blood. Digitalization of the Southern blot images allowed comparison of repeat number, smear distribution and expansion band intensity between tissues and between patients. We found marked intra-individual variation of repeat number between tissues, whereas there was less variation within each tissue group. In two patients, the size variation between tissues was extreme, with repeat numbers below 100 in all studied non-neural tissues, whereas expansions in neural tissues were 20-40 times greater and in the same size range observed in neural tissues of the other 16 patients. The expansion pattern in different tissues could not distinguish between diagnostic groups and no correlation was found between expansion size in frontal lobe and occurrence of cognitive impairment. In ALS patients, a less number of repeats in the cerebellum and parietal lobe correlated with earlier age of onset and a larger number of repeats in the parietal lobe correlated with a more rapid progression. In 43 other individuals without repeat expansion in blood, we find that repeat sizes up to 15 are stable, as no size variation between blood, brain and spinal cord was found.

Metabolomics for early pancreatic cancer detection in plasma samples from a Swedish prospective population-based biobank.

Background: Pancreatic ductal adenocarcinoma (pancreatic cancer) is often detected at late stages resulting in poor overall survival. To improve survival, more patients need to be diagnosed early when curative surgery is feasible. We aimed to identify circulating metabolites that could be used as early pancreatic cancer biomarkers. Methods: We performed metabolomics by liquid and gas chromatography-mass spectrometry in plasma samples from 82 future pancreatic cancer patients and 82 matched healthy controls within the Northern Sweden Health and Disease Study (NSHDS). Logistic regression was used to assess univariate associations between metabolites and pancreatic cancer risk. Least absolute shrinkage and selection operator (LASSO) logistic regression was used to design a metabolite-based risk score. We used receiver operating characteristic (ROC) analyses to assess the discriminative performance of the metabolite-based risk score. Results: Among twelve risk-associated metabolites with a nominal P value <0.05, we defined a risk score of three metabolites [indoleacetate, 3-hydroxydecanoate (10:0-OH), and retention index (RI): 2,745.4] using LASSO. A logistic regression model containing these three metabolites, age, sex, body mass index (BMI), smoking status, sample date, fasting status, and carbohydrate antigen 19-9 (CA 19-9) yielded an internal area under curve (AUC) of 0.784 [95% confidence interval (CI): 0.714-0.854] compared to 0.681 (95% CI: 0.597-0.764) for a model without these metabolites (P value =0.007). Seventeen metabolites were significantly associated with pancreatic cancer survival [false discovery rate (FDR) <0.1]. Conclusions: Indoleacetate, 3-hydroxydecanoate (10:0-OH), and RI: 2,745.4 were identified as the top candidate biomarkers for early detection. However, continued efforts are warranted to determine the usefulness of these metabolites as early pancreatic cancer biomarkers.

Bio-based anode material production for lithium-ion batteries through catalytic graphitization of biochar: the deployment of hybrid catalysts.

Producing sustainable anode materials for lithium-ion batteries (LIBs) through catalytic graphitization of renewable biomass has gained significant attention. However, the technology is in its early stages due to the bio-graphite's comparatively low electrochemical performance in LIBs. This study aims to develop a process for producing LIB anode materials using a hybrid catalyst to enhance battery performance, along with readily available market biochar as the raw material. Results indicate that a trimetallic hybrid catalyst (Ni, Fe, and Mn in a 1:1:1 ratio) is superior to single or bimetallic catalysts in converting biochar to bio-graphite. The bio-graphite produced under this catalyst exhibits an 89.28% degree of graphitization and a 73.95% conversion rate. High-resolution transmission electron microscopy (HRTEM) reveals the dissolution-precipitation mechanism involved in catalytic graphitization. Electrochemical performance evaluation showed that the trimetallic hybrid catalyst yielded bio-graphite with better electrochemical performances than those obtained through single or bimetallic hybrid catalysts, including a good reversible capacity of about 293 mAh g-1 at a current density of 20 mA/g and a stable cycle performance with a capacity retention of over 98% after 100 cycles. This study proves the synergistic efficacy of different metals in catalytic graphitization, impacting both graphite crystalline structure and electrochemical performance.

Distributed electrified heating for efficient hydrogen production.

This study introduces a distributed electrified heating approach that is able to innovate chemical engineering involving endothermic reactions. It enables rapid and uniform heating of gaseous reactants, facilitating efficient conversion and high product selectivity at specific equilibrium. Demonstrated in catalyst-free CH4 pyrolysis, this approach achieves stable production of H2 (530 g h-1 L reactor -1) and carbon nanotube/fibers through 100% conversion of high-throughput CH4 at 1150 °C, surpassing the results obtained from many complex metal catalysts and high-temperature technologies. Additionally, in catalytic CH4 dry reforming, the distributed electrified heating using metallic monolith with unmodified Ni/MgO catalyst washcoat showcased excellent CH4 and CO2 conversion rates, and syngas production capacity. This innovative heating approach eliminates the need for elongated reactor tubes and external furnaces, promising an energy-concentrated and ultra-compact reactor design significantly smaller than traditional industrial systems, marking a significant advance towards more sustainable and efficient chemical engineering society.

OnPLS integration of transcriptomic, proteomic and metabolomic data shows multi-level oxidative stress responses in the cambium of transgenic hipI- superoxide dismutase Populus plants.

BACKGROUND: Reactive oxygen species (ROS) are involved in the regulation of diverse physiological processes in plants, including various biotic and abiotic stress responses. Thus, oxidative stress tolerance mechanisms in plants are complex, and diverse responses at multiple levels need to be characterized in order to understand them. Here we present system responses to oxidative stress in Populus by integrating data from analyses of the cambial region of wild-type controls and plants expressing high-isoelectric-point superoxide dismutase (hipI-SOD) transcripts in antisense orientation showing a higher production of superoxide. The cambium, a thin cell layer, generates cells that differentiate to form either phloem or xylem and is hypothesized to be a major reason for phenotypic perturbations in the transgenic plants. Data from multiple platforms including transcriptomics (microarray analysis), proteomics (UPLC/QTOF-MS), and metabolomics (GC-TOF/MS, UPLC/MS, and UHPLC-LTQ/MS) were integrated using the most recent development of orthogonal projections to latent structures called OnPLS. OnPLS is a symmetrical multi-block method that does not depend on the order of analysis when more than two blocks are analysed. Significantly affected genes, proteins and metabolites were then visualized in painted pathway diagrams. RESULTS: The main categories that appear to be significantly influenced in the transgenic plants were pathways related to redox regulation, carbon metabolism and protein degradation, e.g. the glycolysis and pentose phosphate pathways (PPP). The results provide system-level information on ROS metabolism and responses to oxidative stress, and indicate that some initial responses to oxidative stress may share common pathways. CONCLUSION: The proposed data evaluation strategy shows an efficient way of compiling complex, multi-platform datasets to obtain significant biological information.

Van Krevelen diagrams based on machine learning visualize feedstock-product relationships in thermal conversion processes.

Feedstock properties play a crucial role in thermal conversion processes, where understanding the influence of these properties on treatment performance is essential for optimizing both feedstock selection and the overall process. In this study, a series of van Krevelen diagrams were generated to illustrate the impact of H/C and O/C ratios of feedstock on the products obtained from six commonly used thermal conversion techniques: torrefaction, hydrothermal carbonization, hydrothermal liquefaction, hydrothermal gasification, pyrolysis, and gasification. Machine learning methods were employed, utilizing data, methods, and results from corresponding studies in this field. Furthermore, the reliability of the constructed van Krevelen diagrams was analyzed to assess their dependability. The van Krevelen diagrams developed in this work systematically provide visual representations of the relationships between feedstock and products in thermal conversion processes, thereby aiding in optimizing the selection of feedstock and the choice of thermal conversion technique.

Investigation of the Initial Corrosion Destruction of a Metal Matrix around Different Non-Metallic Inclusions on Surfaces of Pipeline Steels.

Typical non-metallic inclusions in two industrial low-carbon steels for oil pipelines were investigated as three-dimensional objects on film filters after electrolytic extraction and filtration of metal samples. A method of soft chemical extraction using a 10%AA electrolyte was used to study the initial corrosion process in the steel matrix surrounding various non-metallic inclusions. To determine and compare "corrosive" inclusions and their influence on the initial stages of corrosion of the adjacent layer of the steel matrix, quantitative parameters (such as the diameter of the corrosion crater (Dcr) and pit (Dpit), and the relative dissolution coefficient of the metal matrix (KD) around various inclusions) were determined after chemical extraction. It was found that CaO-Al2O3-MgO oxides and TiN inclusions did not cause an initial corrosion of the steel matrix surrounding these inclusions. However, tensile stresses in the steel matrix occurred around CaS inclusions (or complex inclusions containing a CaS phase), which contributed to the initiation of corrosion around these inclusions.

Preoperative biomarkers related to inflammation may identify high-risk anastomoses in colorectal cancer surgery: explorative study.

BACKGROUND: Colorectal anastomotic leakage can be considered a process of failed wound healing, for which related biomarkers might be a promising research area to decrease leak rates. METHODS: Patients who had elective surgery with a primary anastomosis for non-metastatic colorectal cancer, at two university hospitals between 1 January 2010 and 31 December 2015 were included. Patients with an anastomotic leak were identified and matched (1:1) to complication-free controls on the basis of sex, age, tumour stage, tumour location, and operating hospital. Preoperative blood samples were analysed by use of protein panels associated with systemic or enteric inflammation by proteomics, and enzyme-linked immunosorbent assays. Multivariable projection methods were used in the statistical analyses and adjusted for multiple comparisons to reduce false positivity. Rectal cancer tissue samples were evaluated with immunohistochemistry to determine local expression of biomarkers that differed significantly between cases and controls. RESULTS: Out of 726 patients undergoing resection, 41 patients with anastomotic leakage were matched to 41 controls. Patients with rectal cancer with leakage displayed significantly elevated serum levels of 15 proteins related to inflammation. After controlling for a false discovery rate, levels of C-X-C motif chemokine 6 (CXCL6) and C-C motif chemokine 11 (CCL11) remained significant. In patients with colonic cancer with leakage, levels of high-sensitivity C-reactive protein (hs-CRP) were increased before surgery. Local expression of CXCL6 and CCL11, and their receptors, were similar in rectal tissues between cases and controls. CONCLUSION: Patients with anastomotic leakage could have an upregulated inflammatory response before surgery, as expressed by elevated serological levels of CXCL6 and CCL11 for rectal cancer and hs-CRP levels in patients with colonic cancer respectively.

Type IV Collagen in Human Colorectal Liver Metastases-Cellular Origin and a Circulating Biomarker.

Circulating type IV collagen (cCOL IV) is a potential biomarker for patients with colorectal liver metastases (CLM) who present with elevated levels of COL IV in both CLM tissue and circulation. This study aimed to establish the cellular origin of elevated levels of COL IV and analyze circulating COL IV in CLM patients. The cellular source was established through in situ hybridization, immunohistochemical staining, and morphological evaluation. Cellular expression in vitro was assessed by immunofluorescence. Tissue expression of COL IV-degrading matrix metalloproteinases (MMPs)-2, -7, -9, and -13 was studied with immunohistochemical staining. Plasma levels of COL IV in CLM patients and healthy controls were analyzed with ELISA. This study shows that cancer-associated fibroblasts (CAFs) express COL IV in the stroma of CLM and that COL IV is expressed in vitro by fibroblasts but not by tumor cells. MMP-2, -7, -9, and -13 are expressed in CLM tissue, mainly by hepatocytes and immune cells, and circulating COL IV is significantly elevated in CLM patients compared with healthy controls. Our study shows that stromal cells, not tumor cells, produce COL IV in CLM, and that circulating COL IV is elevated in patients with CLM.

Distinct metabolic hallmarks of WHO classified adult glioma subtypes.

BACKGROUND: Gliomas are complex tumors with several genetic aberrations and diverse metabolic programs contributing to their aggressive phenotypes and poor prognoses. This study defines key metabolic features that can be used to differentiate between glioma subtypes, with potential for improved diagnostics and subtype targeted therapy. METHODS: Cross-platform global metabolomic profiling coupled with clinical, genetic, and pathological analysis of glioma tissue from 224 tumors-oligodendroglioma (n = 31), astrocytoma (n = 31) and glioblastoma (n = 162)-were performed. Identified metabolic phenotypes were evaluated in accordance with the WHO classification, IDH-mutation, 1p/19q-codeletion, WHO-grading 2-4, and MGMT promoter methylation. RESULTS: Distinct metabolic phenotypes separate all six analyzed glioma subtypes. IDH-mutated subtypes, expressing 2-hydroxyglutaric acid, were clearly distinguished from IDH-wildtype subtypes. Considerable metabolic heterogeneity outside of the mutated IDH pathway were also evident, with key metabolites being high expression of glycerophosphates, inositols, monosaccharides, and sugar alcohols and low levels of sphingosine and lysoglycerophospholipids in IDH-mutants. Among the IDH-mutated subtypes, we observed high levels of amino acids, especially glycine and 2-aminoadipic acid, in grade 4 glioma, and N-acetyl aspartic acid in low-grade astrocytoma and oligodendroglioma. Both IDH-wildtype and mutated oligodendroglioma and glioblastoma were characterized by high levels of acylcarnitines, likely driven by rapid cell growth and hypoxic features. We found elevated levels of 5-HIAA in gliosarcoma and a subtype of oligodendroglioma not yet defined as a specific entity, indicating a previously not described role for the serotonin pathway linked to glioma with bimorphic tissue. CONCLUSION: Key metabolic differences exist across adult glioma subtypes.

Pyrolysis of engineered beach-cast seaweed: Performances and life cycle assessment.

The blooming of beach-cast seaweed has caused environmental degradation in some coastal regions. Therefore, a proper treating and utilizing method of beach-cast seaweed is demanded. This study investigated the potential of producing power or biofuel from pyrolysis of beach-cast seaweed and the effect of the ash-washing process. First, the raw and washed beach-cast seaweeds (RS and WS) were prepared. Thereafter, thermogravimetric analysis (TG), bench-scale pyrolysis experiment, process simulation, and life cycle assessment (LCA) were conducted. The TG results showed that the activation energies of thermal decomposition of the main organic contents of RS and WS were 44.23 and 58.45 kJ/mol, respectively. Three peak temperatures of 400, 500, and 600 °C were used in the bench-scale pyrolysis experiments of WS. The 600 °C case yielded the most desirable gas and liquid products. The bench-scale pyrolysis experiment of RS was conducted at 600 °C as well. Also, an LCA was conducted based on the simulation result of 600 °C pyrolysis of WS. The further process simulation and LCA results show that compare to producing liquid biofuel and syngas, a process designed for electricity production is most favored. It was estimated that treating 1 ton of dry WS can result in a negative cumulative energy demand of -2.98 GJ and carbon emissions of -790.89 kg CO2 equivalence.

Neutralization of Acidic Wastewater from a Steel Plant by Using CaO-Containing Waste Materials from Pulp and Paper Industries.

In this study, CaO-containing wastes from pulp and paper industries such as fly ash (FA) and calcined lime mud (LM) were utilized to neutralize and purify acidic wastewaters from the pickling processes in steel mills. The investigations were conducted by laboratory scale trials using four different batches of wastewaters and additions of two types of CaO-containing waste materials. Primary lime (PL), which is usually used for the neutralization, was also tested in the same experimental set up in the sake of comparison. The results show that these secondary lime sources can effectively increase the pH of the acidic wastewaters as good as the commonly used primary lime. Therefore, these secondary lime sources could be potential candidates for application in neutralization processes of industrial acidic wastewater treatment. Moreover, concentrations of metals (such as Cr, Fe, Ni, Mo and Zn) can decrease dramatically after neutralization by using secondary lime. The LM has a purification effect from the given metals, similar to the PL. Application of fly ash and calcined lime mud as neutralizing agents can reduce the amount of waste from pulp and paper mills sent to landfill and decrease the need for nature lime materials in the steel industry.

Effect of Froude Number on Submerged Gas Blowing Characteristics.

The flow behavior of gas in compressible and incompressible systems was investigated at an ambient temperature in an air-water system and at an operating process temperature in the IronArc system, using computational fluid dynamics. The simulation results were verified by experiments in the air-water system and established empirical equations to enable reliable predictions of the penetration length. The simulations in the air-water system were found to replicate the experimental behavior using both the incompressible and compressible models, with only small deviations of 7-8%. A lower requirement for the modified Froude number of the gas blowing to produce a jetting behavior was also found. For gas blowing below the required modified Froude number, the results illustrate that the gas will form large pulsating bubbles instead of a steady jet, which causes the empirical equation calculations to severely underpredict the penetration length. The lower modified Froude number limit was also found to be system dependent and to have an approximate value of 300 for the studied IronArc system. For submerged blowing applications, it was found that it is important to ensure sufficiently high modified Froude numbers of the gas blowing. Then, the gas penetration length will remain stable as a jet and it will be possible to predict the values using empirical equations.

Effect of Thermal Buoyancy on Fluid Flow and Residence-Time Distribution in a Single-Strand Tundish.

Natural convection of molten steel flow in a tundish occurs due to the temperature variation of the inlet stream and heat losses through top surface and refractory walls. A computational fluid dynamics (CFD) model was applied to study the effect of thermal buoyancy on fluid flow and residence-time distribution in a single-strand tundish. The CFD model was first validated with the experimental data from a non-isothermal water model and then applied to both scale-down model and prototype. The effects of flow control devices, including weir, dam and turbulence inhibitor, were compared and analyzed. Parameter studies of different heat losses through the top surface were performed. The results show that thermal buoyancy has a significant impact on the flow pattern and temperature distributions of molten steel in the tundish. The increase of heat loss through the top surface shortens the mean residence time of molten steel in the tundish, leading to an increase in dead volume fraction and a decrease in plug flow volume fraction.

A Study of Treatment of Industrial Acidic Wastewaters with Stainless Steel Slags Using Pilot Trials.

Different stainless steel slags have been successfully employed in previous experiments, for the treatment of industrial acidic wastewaters. Although, before this technology can be implemented on an industrial scale, upscaled pilot experiments need to be performed. In this study, the parameters of the upscale trials, such as the volume and mixing speeds, are firstly tested by dispersing a NaCl tracer in a water bath. Mixing time trials are used to maintain constant mixing conditions when the volumes are increased to 70, 80 and 90 L, compared to the 1 L laboratory trials. Subsequently, the parameters obtained are used in pH buffering trials, where stainless steel slags are used as reactants, replicating the methodology of previous studies. Compared to laboratory trials, the study found only a minor loss of efficiency. Specifically, in previous studies, 39 g/L of slag was needed to buffer the pH of the acidic wastewaters. To reach similar pH values within the same time span, upscaled trials found a ratio of 43 g/L and 44 g/L when 70 and 90 L are used, respectively. Therefore, when the kinetic conditions are controlled, the technology appears to be scalable to higher volumes. This is an important finding that hopefully promotes further investments in this technology.

Can torrefaction be a suitable method of enhancing shredder fines recycling?

Effective recycling of metallic waste and end-of-life vehicles (ELVs) is of crucial importance. Currently used separation and sorting techniques result in the formation of fine residue (usually below 10-20 mm) called shredder fines. Shredder fines contain the so-called 'fluff' (i.e., foam, wood and textile fibres) with metal particles entangled in it. This 'fluff' interferes with sorting techniques and thus reduces the metal recycling rate. For this reason, presently, shredder fines are primarily landfilled, which is not covered by the greater objective of the circular economy; therefore, the need for their recycling emerged. Low-temperature pyrolysis (torrefaction) increases the 'fluff' fragility and thus liberates the metal particles without their substantial oxidation, thereby enabling their recycling. For that reason, in this article, shredder fines torrefaction was performed at the temperature range of 250-450 °C. The process products were comprehensively characterised using, among others, MicroGC (non-condensables), GC/MS (condensables), and ICP-SFMS (char). The possible application of the torrefied shredder fines after the metal sorting was discussed as well. Torrefaction was identified as a promising way of shredder fines recycling, and the torrefied shredder fines after metals sorting have the potential to be used as an ingredient of a raw material mix for cement kilns.

Magnetic bio-activated carbons production using different process parameters for phosphorus removal from artificially prepared phosphorus-rich and domestic wastewater.

A series of magnetic bio-activated carbon (MBAC) has been produced from lignin and ferrous salts following to the process including impregnation, carbonization, and steam activation. The influence of the impregnation methods and the steam flow rate on the quality and the maximum phosphorus adsorption capacity of the produced MBACs has been investigated. The phosphorus adsorption performance in real domestic wastewater of the MBAC with the highest maximum phosphorus adsorption capacity has been investigated. The results show that all of the produced MBACs have a relatively rich porous structure, and all surface iron species exist as magnetite (Fe3O4). Compared with the MBACs that are produced via the dry impregnation method using a lower steam flow rate, the MBACs that are produced via the wet impregnation method using a higher steam flow rate are believed to have a higher iron content and better iron species dispersion. The highest maximum phosphorus adsorption capacity of all the produced MBACs is estimated to be as high as 69.80 mg-P/g according to the best-fitting Langmuir model. The MBAC that shows the highest maximum phosphorus adsorption capacity could also remove 84.65% and 96.97% of the total phosphorus from the filtered raw domestic wastewater (FRDW) and treated domestic wastewater (TDW), respectively, which indicates a good potential for using MBACs for domestic wastewater treatment.