Fam60A plays a role for production stabilities of recombinant CHO cell lines.

Recombinant CHO (Chinese hamster ovary) cell lines producing therapeutic proteins often lose their production capability during long-term cultivation. To ensure that CHO production cell lines can be up-scaled to high-volume bioreactors, labor intensive stability studies of several months have to be performed to deselect clones that are losing productivity over time. The ability to predict whether clones will produce recombinant proteins at constant high levels, for example, through determination of biomarkers such as expression of specific genes, plasmid integration sites, or epigenetic patterns, or even to improve CHO host cell lines to increase the probability of the generation of stable clones would be highly beneficial. Previously, we reported that the lack of a telomeric region of chromosome 8 correlates with increased productivities and higher production stabilities of monoclonal antibody expressing CHO cell lines (Ritter A, Voedisch B, Wienberg J, Wilms B, Geisse S, Jostock T, Laux H. 2016a. Biotechnol Bioeng 113(5):1084-1093). Herein, we describe that the knock-out of the gene Fam60A, which is one of the genes located within the telomeric region of chromosome 8, in CHO-K1a cells leads to the isolation of significantly more clones with higher protein production stabilities of monoclonal antibodies during long-term cultivation. Biotechnol. Bioeng. 2017;114: 701-704. © 2016 Wiley Periodicals, Inc.

Deletion of a telomeric region on chromosome 8 correlates with higher productivity and stability of CHO cell lines.

Chinese Hamster Ovary (CHO) cells are widely used for large scale production of recombinant biopharmaceuticals. Although these cells have been extensively used, a demand to further increase the performance, for example, to facilitate the process of clone selection to isolate the highest producing cell lines that maintain stability of production over time is still existing. We compared gene expression profiles of high versus low producing CHO clones to identify regulated genes which can be used as biomarkers during clone selection or for cell line engineering. We present evidence that increased production rates and cell line stability are correlated with the loss of the telomeric region of the chromosome 8. A new parental CHO cell line lacking this region was generated and its capability for protein production was assessed. The average volumetric productivity of cells after gene transfer and selection was found to be several fold improved, facilitating the supply of early drug substance material to determine for example, quality. In addition, significantly more cell clones with a higher average productivity and higher protein production stability were obtained with the new host cell line after single cell cloning. This allows reduced efforts in single cell sorting, screening of fewer clones and raises the opportunity to circumvent time and labor-intensive stability studies.

Improving expression of recombinant human IGF-1 using IGF-1R knockout CHO cell lines.

Chinese Hamster Ovary (CHO) cells are widely used for the large-scale production of recombinant biopharmaceuticals. However, attempts to express IGF-1 (a mutated human Insulin-like growth factor 1 Ea peptide (hIGF-1Ea mut)) in CHO cells resulted in poor cell growth and low productivity (0.1-0.2 g/L). Human IGF-1 variants negatively impacted CHO cell growth via the IGF-1 receptor (IGF-1R). Therefore knockout (KO) of the IGF-1R gene in two different CHO cell lines as well as knockdown (KD) of IGF-1R in one CHO cell line were performed. These cell line engineering approaches decreased significantly the hIGF-1 mediated cell growth inhibition and increased productivity of both KO CHO cell lines as well as of the KD CHO cell line. A productivity increase of 10-fold at pool level and sevenfold at clone level was achieved, resulting in a titer of 1.3 g/L. This data illustrate that cell line engineering approaches are powerful tools to improve the yields of recombinant proteins which are difficult to produce in CHO cells.

Surface display vectors for selective detection and isolation of high level antibody producing cells.

Cell line generation for production of biopharmaceuticals in mammalian cells usually involves intensive screening of clones to identify the rare high producers. In order to facilitate efficient and selective fluorescence activated cell sorting (FACS) based enrichment and cloning of antibody producing CHO cells, we developed a special vector setup by inserting a leaky translation termination signal between the heavy chain of an IgG antibody and an IgG transmembrane domain. Partial read-through during translation of the antibody heavy chain leads to display of a subset of the produced antibody on the surface of the expressing cell. We could show that the level of surface expression correlates well with the productivity. By applying FACS, high producing cells can be selectively enriched and cloned. Two sequential FACS enrichment cycles were performed which led to more than eightfold increased productivities of transfected and selected cell populations without cloning. The combination of selective FACS enrichment and FACS cloning with the new vector setup led to a sevenfold higher average productivity of the resulting clones as compared to a reference vector. Productivity and production stability assessment of clones generated with the new vector showed no negative impact of the co-expression of transmembrane antibody. Clone productivities of 4 g/L in a generic shake flask fed-batch model were achieved. Thus, this new vector setup facilitates fast and selective isolation of high producing production cell lines and allows significant reduction of clone screening efforts during cell line development for production cell lines. Additionally, the high productivity of FACS-enriched but non-clonal cell populations supports rapid, high yield, and cost efficient material production in early project phases. Biotechnol. Bioeng. 2016;113: 2386-2393. © 2016 Wiley Periodicals, Inc.

Disruption of the gene C12orf35 leads to increased productivities in recombinant CHO cell lines.

Recently, we reported that the loss of a telomeric region of chromosome 8 in Chinese Hamster Ovary (CHO) cells correlates with higher recombinant productivities. New cell lines lacking this region, called CHO-C8DEL, showed several advantages during cell line generation and for the production of recombinant proteins (Ritter et al., 2016, Biotechnol Bioeng). Here, we performed knock-down and knock-out experiments of genes located within this telomeric region of chromosome 8 to identify the genes causing the observed phenotypes of CHO-C8DEL cell lines. We present evidence that loss or reduced expression of the gene C12orf35 is responsible for higher productivities and shorter recovery times during selection pressure. These effects are mediated by increased levels of mRNA of the exogenes heavy chain (HC) and light chain (LC) as well as dihydrofolate reductase (DHFR) and neomycin phosphotransferase (Neo) during the stable expression of antibodies. Biotechnol. Bioeng. 2016;113: 2433-2442. © 2016 Wiley Periodicals, Inc.

Combination of the 2A/furin technology with an animal component free cell line development platform process.

The recently described 2A/furin technology combines both chains of the antibody in a single open reading frame. Upon translation and secretion, the peptide is processed by the cell to generate native fully functional IgG antibodies. Here, we describe the results of an evaluation study of this technology for an industrial CHO cell line development process. The 2A/furin expression cassette setup was combined with a Novartis vector system. A transfection, selection, and cloning procedure in chemically defined media was established at Novartis and applied for a monoclonal test antibody. The productivity of 2A/furin-vector-derived clones in non-optimized generic shake flask fed-batch models was in a comparable range with clones derived from the reference control vector. Higher clonal production stability was seen for the majority of clones generated with the 2A/furin technology compared to the clones generated with the reference control vector. Product quality was analyzed by SDS-PAGE and no significant difference was detected between the two systems. Thus, it was shown that the 2A/furin technology can be successfully combined with a Novartis CHO expression system and platform. Due to the single ORF setup, the 2A/furin technology may therefore offer a suitable approach to reduce vector size and complexity.

Advancing Biologics Development Programs with Legacy Cell Lines: Advantages and Limitations of Genetic Testing for Addressing Clonality Concerns Prior to Availability of Late Stage Process and Product Consistency Data.

The bioprocessing industry uses recombinant mammalian cell lines to generate therapeutic biologic drugs. To ensure consistent product quality of the therapeutic proteins, it is imperative to have a controlled production process. Regulatory agencies and the biotechnology industry consider cell line "clonal origin" an important aspect of maintaining process control. Demonstration of clonal origin of the cell substrate, or production cell line, has received considerable attention in the past few years, and the industry has improved methods and devised standards to increase the probability and/or assurance of clonal derivation. However, older production cell lines developed before the implementation of these methods, herein referred to as "legacy cell lines," may not meet current regulatory expectations for demonstration of clonal derivation. In this article, the members of the IQ Consortium Working Group on Clonality present our position that the demonstration of process consistency and product comparability of critical quality attributes throughout the development life cycle should be sufficient to approve a license application without additional genetic analysis to support clonal origin, even for legacy cell lines that may not meet current day clonal derivation standards. With this commentary, we discuss advantages and limitations of genetic testing methods to support clonal derivation of legacy cell lines and wish to promote a mutual understanding with the regulatory authorities regarding their optional use during early drug development, subsequent to Investigational New Drug (IND) application and before demonstration of product and process consistency at Biologics License Applications (BLA) submission.

Analysis of IgG heavy chain to light chain ratio with mutant Encephalomyocarditis virus internal ribosome entry site.

Immunoglobulin G (IgG) is a heterotetrameric protein assembled from two identical heavy chain (HC) and two identical light chain (LC) polypeptides. The HC and LC folding and assembly are a crucial step for IgG production. It is affected by the ratio of HC to LC expression (HC:LC). To date, the HC:LC ratio was analysed mainly by cotransfection of different amounts of two monocistronic HC and LC expression plasmids, an approach biased by different transfection efficiencies. To circumvent this problem, a series of Encephalomyocarditis virus internal ribosome entry site (EMCV IRES) variants with different translation efficiencies were created and used to mediate HC translation in bicistronic constructs. HC and LC were translated from the same mRNA, which provides a more accurate method for the evaluation of the optimal ratio of HC:LC. The results show that the IgG optimal expression levels were obtained when the IRES mediated translation efficiency of the HC was about 50% compared to the cap-dependent translation of the LC. A surprisingly sharp transition to low production was shown when the ratios were below 40%. This study provides a new method to investigate the production of heterodimeric proteins in mammalian cells and adds understanding to the mechanisms of IgG folding and assembly.

Single chain Fab (scFab) fragment.

BACKGROUND: The connection of the variable part of the heavy chain (VH) and and the variable part of the light chain (VL) by a peptide linker to form a consecutive polypeptide chain (single chain antibody, scFv) was a breakthrough for the functional production of antibody fragments in Escherichia coli. Being double the size of fragment variable (Fv) fragments and requiring assembly of two independent polypeptide chains, functional Fab fragments are usually produced with significantly lower yields in E. coli. An antibody design combining stability and assay compatibility of the fragment antigen binding (Fab) with high level bacterial expression of single chain Fv fragments would be desirable. The desired antibody fragment should be both suitable for expression as soluble antibody in E. coli and antibody phage display. RESULTS: Here, we demonstrate that the introduction of a polypeptide linker between the fragment difficult (Fd) and the light chain (LC), resulting in the formation of a single chain Fab fragment (scFab), can lead to improved production of functional molecules. We tested the impact of various linker designs and modifications of the constant regions on both phage display efficiency and the yield of soluble antibody fragments. A scFab variant without cysteins (scFabDeltaC) connecting the constant part 1 of the heavy chain (CH1) and the constant part of the light chain (CL) were best suited for phage display and production of soluble antibody fragments. Beside the expression system E. coli, the new antibody format was also expressed in Pichia pastoris. Monovalent and divalent fragments (DiFabodies) as well as multimers were characterised. CONCLUSION: A new antibody design offers the generation of bivalent Fab derivates for antibody phage display and production of soluble antibody fragments. This antibody format is of particular value for high throughput proteome binder generation projects, due to the avidity effect and the possible use of common standard sera for detection.

A comparative study of different vector designs for the mammalian expression of recombinant IgG antibodies.

Monoclonal antibodies (Mab) are the fastest growing group of biopharmaceuticals in development. For production in mammalian cells, the four polypeptide chains of the immunoglobulin diheterotetramer must be assembled prior to exit from the endoplasmic reticulum. Various recombinant Mab expression vectors have been developed utilizing mono-and bicistronic expression cassettes encoded on one or two plasmids. However, there are only few studies providing information on the type of vector design optimal for stable or transient production of recombinant IgG. Consequently, in this study, we have constructed a series of mammalian expression vectors for the production of recombinant human or chimeric IgG antibodies with different expression cassette designs. Versions for monocistronic and bicistronic expression with different promoters and cistron arrangements were generated. Antibody production levels were evaluated in transiently transfected 293T and CHO-K1 cells. Furthermore, stable CHO cell lines were generated and analyzed for antibody production levels and stability. Our results indicate that compared to monocistronic expression, EMCV IRES-mediated bicistronic expression constructs yield similar antibody expression levels and show long-term stability in CHO cell lines. Addition of a third cistron encoding YFP was shown to facilitate screening and isolation of clones using a FACS sorter.

Screening of molecular repertoires by microbial surface display.

A multitude of systems for the presentation of foreign peptides or proteins on the surface of microorganisms has been developed within the past two decades. However, the majority of the bacterial surface display systems are devoted to the presentation of heterologous antigens to the immune system (vaccine generation). Bacteria are the preferable hosts for the generation of vast genetic repertoires, and their genetic manipulation and cultivation is easy. As a consequence, they provide promising systems for large-scale functional screenings, e.g. for enzyme activity or protein-protein interactions. This review will focus on examples of microbial surface display used for the screening of combinatorial repertoires. Further, we discuss future opportunities and promising candidate proteins not yet employed for that task.

Rapid generation of functional human IgG antibodies derived from Fab-on-phage display libraries.

We introduce a procedure for the rapid generation of fully human antibodies derived from "Fab-on-phage" display libraries. The technology is based on the compatibility of display vectors and IgG expression constructs, and allows reformatting of individual Fab clones to IgG, as well as reformatting of antibody repertoires. Examples of batch reformatting of an uncharacterized Fab repertoire and of a pool of Fabs, previously analyzed at the phage level, are presented. The average transient expression levels of the IgG constructs in HEK293T cells are above 10 microg/ml, allowing the use of conditioned media in functional assays without antibody purification. Furthermore, we describe a high-throughput purification method yielding IgG amounts sufficient for initial antibody characterization. Our technology allows the generation and production of antigen-specific complete human antibodies as fast or even faster than raising monoclonal antibodies by conventional hybridoma techniques.

Mammalian stable expression of biotherapeutics.

Many therapeutically relevant proteins, like IgG antibodies, are highly complex, multimeric glycoproteins that are difficult to express in microbial systems and thus usually produced in mammalian host cells. During the past two decades, stable mammalian expression technologies have made huge progress resulting in highly increased speed of cell line development and yield of manufacturing processes. Here, we give an overview of technologies that are applied at different stages of state-of-the-art cell line development processes for biomanufacturing.

Oligomeric forms of single chain immunoglobulin (scIgG).

Assembly of immunoglobulin G (IgG) molecules from two heavy and two light chains can be facilitated by connecting the light chain to the heavy chain by an oligopeptide linker. Production of the anti-lysozyme D1.3-single chain (sc) IgG1 in HEK293T cells yielded up to 8 mg/L functional scIgG polypeptide. Size exclusion chromatography of material purified by protein-A affinity chromatography revealed that the majority of the D1.3-scIgG1 molecules were 150 kDa monomers, with a K(D) of 1.8 x 10(-10) M measured by surface plasmon resonance; however, significant fractions of scIgG dimers and oligomers with molecular masses of 300 kDa and >600 kDa, respectively, were identified. The oligomerization resulted in an increased avidity. The observed oligomerization capability may allow new approaches for the generation of bispecific/multivalent antibodies.

Critical role of the disintegrin metalloprotease ADAM17 for intestinal inflammation and regeneration in mice.

The protease a disintegrin and metalloprotease (ADAM) 17 cleaves tumor necrosis factor (TNF), L-selectin, and epidermal growth factor receptor (EGF-R) ligands from the plasma membrane. ADAM17 is expressed in most tissues and is up-regulated during inflammation and cancer. ADAM17-deficient mice are not viable. Conditional ADAM17 knockout models demonstrated proinflammatory activities of ADAM17 in septic shock via shedding of TNF. We used a novel gene targeting strategy to generate mice with dramatically reduced ADAM17 levels in all tissues. The resulting mice called ADAM17(ex/ex) were viable, showed compromised shedding of ADAM17 substrates from the cell surface, and developed eye, heart, and skin defects as a consequence of impaired EGF-R signaling caused by failure of shedding of EGF-R ligands. Unexpectedly, although the intestine of unchallenged homozygous ADAM17(ex/ex) mice was normal, ADAM17(ex/ex) mice showed substantially increased susceptibility to inflammation in dextran sulfate sodium colitis. This was a result of impaired shedding of EGF-R ligands resulting in failure to phosphorylate STAT3 via the EGF-R and, consequently, in defective regeneration of epithelial cells and breakdown of the intestinal barrier. Besides regulating the systemic availability of the proinflammatory cytokine TNF, our results demonstrate that ADAM17 is needed for vital regenerative activities during the immune response. Thus, our mouse model will help investigate ADAM17 as a potential drug target.

Human antibody RNase fusion protein targeting CD30+ lymphomas.

Targeted RNases (TRs) are immunoenzymes with ribonucleases as cytotoxic effector domains, which are less immunogenic as plant or bacterial toxin components of classical immunotoxins. In this study, we show the generation and production of the first entirely human TR (huTR) directed against CD30+ lymphomas. The scFv-Fc-RNase construct was produced in human embryonic kidney (HEK) 293T cells, yielding up to 4 mg/L soluble protein after purification by protein A affinity chromatography. Size exclusion chromatography revealed a homodimer of the predicted molecular mass. Surface plasmon resonance analysis revealed an affinity to CD30 of KD of less than 1 nM for both the scFv-Fc and the scFv-Fc-RNase proteins. Internalization of the scFv-Fc-RNase protein by CD30+ Karpas-299 cells was demonstrated by confocal microscopy. Proliferation of the CD30+ lymphoma cell line Karpas-299 was strongly inhibited by CD30-specific huTR protein (IC50=3.3 nM). The huTR is a promising candidate for the immunotherapy of CD30+ lymphomas because of its expected low immunogenicity, good production yields, and potent effector function upon target cell binding and internalization. Its modular design is set to target other internalizing tumor antigens using different antibody domains.

Recommended Method for Chromosome Exploitation: RMCE-based Cassette-exchange Systems in Animal Cell Biotechnology.

The availability of site-specific recombinases has revolutionized the rational construction of cell lines with predictable properties. Early efforts were directed to providing pre-characterized genomic loci with a single recombinase target site that served as an address for the integration of vectors carrying a compatible tag. Efficient procedures of this type had to await recombinases like PhiC31, which recombine attP and attB target sites in a one-way reaction - at least in the cellular environment of the higher eukaryotic cell. Still these procedures lead to the co-introduction of prokaryotic vector sequences that are known to cause epigenetic silencing. This review illuminates the actual status of the more advanced recombinase-mediated cassette exchange (RMCE) techniques that have been developed for the major members of site-specific recombinases (SR), Flp, Cre and PhiC31. In RMCE the genomic address consists of a set of heterospecific recombinase target (RT-) sites permitting the exchange of the intervening sequence for the gene of interest (GOI), as part of a similar cassette. This process locks the GOI in place and it is 'clean' in the sense that it does not co-introduce prokaryotic vector parts nor does it leave behind a selection marker.