RESUMO
INTRODUCTION: Mandibular prognathism (MP) is a common craniofacial disorder of Class III malocclusion that causes esthetic and functional problems. Class III malocclusion diversity is influenced by both environmental and genetic factors. Single nucleotide polymorphisms (SNPs) in genes involved in craniofacial morphogenesis, bone and cartilage development, and metabolism, could play a role as predisposing factors. The present study aimed to establish a potential association between MATN1 -1878 A>G (rs1149048), MYO1H 1001 C>T (rs3825393), and BMP-4 538 A>G (rs17563) SNPs and MP in Serbian population. METHODS: The study included 110 participants: 55 patients with Class III malocclusion diagnosed with MP and 55 with Class I malocclusion. The 3 SNPs were analyzed using the polymerase chain reaction-restriction fragment length polymorphism method. RESULTS: The genotype frequency of MYO1H showed a highly significant difference between patients and controls. Heterozygous carriers of the T allele had an almost 3-fold increase in odds for the development of MP (odds ratio, 2.79; 95% confidence interval, 1.26-6.19; P = 0.010). No association could be established between MATN1 and BMP-4 polymorphisms and MP. CONCLUSIONS: Our results support the concept of gene polymorphisms as risk modulators in mandibular prognathism development, although only the association between MYO1H and MP was found in Serbian patients with Class III malocclusion.
RESUMO
During extraction of the primary mandibular right second molar in an 11-year-old girl, the unerupted second premolar was accidentally extracted. Clinical and radiographic examination showed that the immediately replanted immature premolar was not oriented and positioned correctly. Four hours later, treatment consisted of manual extrusion of the permanent tooth bud, rotation, and gentle repositioning into its original position. Adequate replantation was confirmed by a post-operative radiograph. After 2 years and 4 months, clinical examination revealed normal, healthy appearance of the replanted tooth, no sensitivity to percussion, no tenderness to palpation, and a slight response to a cold pulp sensibility test. A radiograph showed completely developed root with closed apical foramen, slightly irregular root morphology and shorter root length, complete obliteration of the pulp, and no signs of periapical pathosis.
Assuntos
Dente Molar/cirurgia , Dente Decíduo , Dente Pré-Molar , Criança , Feminino , Humanos , Germe de Dente , Reimplante DentárioRESUMO
OBJECTIVE: The present study assessed changes of craniofacial complex in Turner syndrome (TS) patients treated with growth hormone (GH) during development. The objective was to examine the growth rate and pattern of craniofacial structures and to establish effects of GH on craniofacial development. MATERIALS AND METHODS: The study population consisted of 15 TS patients treated with GH aged 5-18.5 years (13.3 ± 4.4) and corresponding control group of 45 females aged 6.8-18.7 (11.4 ± 2.6). According to the stage of cervical vertebral maturation, subjects were categorized into pre-growth (5 TS and 15 controls) and growth (10 TS and 30 controls) subgroups. The cephalometric analysis comprised angular and linear variables, measured on lateral cephalometric radiographs. RESULTS: The mandibular corpus/anterior cranial base ratio increased significantly only in controls during development. In growth period, ramus/corpus ratio was significantly larger in TS group. SNA and SNB angles were significantly smaller in TS growth subgroup compared to corresponding controls. Among other variables, no statistically significant differences were revealed. CONCLUSIONS: In TS patients treated with GH, growth capacities of cranial base and maxilla are adequate which can be attributed to GH treatment. Shape of mandible is altered due to decreased growth of corpus and overdeveloped ramus. Both maxillary and mandibular retrognathism are becoming more expressed during development. CLINICAL RELEVANCE: Favorable influence of GH on craniofacial complex growth rate and altered growth pattern revealed in this study should be considered while planning both orthodontic treatment and retention.
Assuntos
Ossos Faciais/crescimento & desenvolvimento , Hormônio do Crescimento Humano/uso terapêutico , Desenvolvimento Maxilofacial/efeitos dos fármacos , Crânio/crescimento & desenvolvimento , Síndrome de Turner/tratamento farmacológico , Adolescente , Determinação da Idade pelo Esqueleto , Cefalometria/métodos , Vértebras Cervicais/crescimento & desenvolvimento , Criança , Pré-Escolar , Ossos Faciais/efeitos dos fármacos , Feminino , Humanos , Mandíbula/efeitos dos fármacos , Mandíbula/crescimento & desenvolvimento , Maxila/efeitos dos fármacos , Maxila/crescimento & desenvolvimento , Osso Nasal/efeitos dos fármacos , Osso Nasal/crescimento & desenvolvimento , Retrognatismo/fisiopatologia , Sela Túrcica/efeitos dos fármacos , Sela Túrcica/crescimento & desenvolvimento , Crânio/efeitos dos fármacos , Base do Crânio/efeitos dos fármacos , Base do Crânio/crescimento & desenvolvimentoRESUMO
The review aimed at analyzing the evidence available on 3D printable materials and techniques used for the fabrication of orthodontic appliances, focusing on materials properties that are clinically relevant. MEDLINE/PubMed, Scopus, and Cochrane Library databases were searched. Starting from an initial retrieval of 669 citations, 47 articles were finally included in the qualitative review. Several articles presented proof-of-concept clinical cases describing the digital workflow to manufacture a variety of appliances. Clinical studies other than these case reports are not available. The fabrication of aligners is the most investigated application of 3D printing in orthodontics, and, among materials, Dental LT Clear Resin (Formlabs) has been tested in several studies, although Tera Harz TC-85 (Graphy) is currently the only material specifically marketed for direct printing of aligners. Tests of the mechanical properties of aligners materials lacked homogeneity in the protocols, while biocompatibility tests failed to assess the influence of intraoral conditions on eluents release. The aesthetic properties of 3D-printed appliances are largely unexplored. The evidence on 3D-printed metallic appliances is also limited. The scientific evidence on 3D printable orthodontic materials and techniques should be strengthened by defining international standards for laboratory testing and by starting the necessary clinical trials.
RESUMO
The need for bracket bonding to ceramic restorations is increasing. The aim of this study was to evaluate the effect of universal adhesives on bracket adhesion to polished or glazed lithium disilicate (LDS) and monolithic zirconia (MZ) surfaces. One hundred and twenty brackets (N = 10) were bonded to either polished or glazed LDS (e.max CAD B32, Ivoclar Vivadent, Schaan, Liechtenstein) and MZ (In-Ceram® YZ, VITA, Bad Sackingen, Germany) blocks using three different adhesives combined with Transbond™ XT Paste (3M Unitek, Monrovia, CA, USA). Tested universal adhesives were Scotchbond™ Universal Adhesive (SU, 3M St. Paul, MN, USA) and Assure Plus (AP, Reliance, Itasca, IL, USA). Transbond™ XT Primer (XTP, 3M Unitek, Monrovia, CA, USA) served as a control adhesive. Bracket bond strength was measured in shear mode (SBS). Failure type was determined by the Modified Adhesive Remnant Index (ARI). Data were statistically analyzed. On polished LDS, SU yielded bracket SBS significantly superior to those of AP and XTP. On polished MZ, the use of SU and AP significantly enhanced bracket retention as compared with XTP. Low SBS values, below the threshold of clinical acceptability, were reached by all tested adhesives on glazed LDS and MZ specimens. SBS measurements corresponded with failure type observations. Universal adhesives SU and AP could be considered for use on polished LDS and MZ surfaces.
RESUMO
The aims of this study were to reconstruct and analyze dental occlusion and skeletal jaw relationship in samples from Mesolithic-Neolithic, Bronze Age, Roman and Medieval times in Serbia, to compare results and to determine possible direction of the occlusal changes. Anatomically preserved skulls with mandibles and most of the posterior teeth were included in the investigation. Dental occlusion was reconstructed using the position of centric occlusion and centric relation and analyzed according to Angle's classification. Lateral cephalometric radiographs were traced manually. Site differences were tested by one-way ANOVA, while sex, age and site impacts were analyzed by UNIANOVA. Most of the individuals in all groups had Class I occlusion. Half-cusp distal occlusion was also present in all groups, but there were no significant differences between the groups. Cephalometric analysis showed no differences in the sagittal measurements, almost all individuals had skeletal Class I jaw relationship. Vertical traits analysis revealed markedly decreased basal plane angle and also decreased posterior facial height and sum of the posterior angles in the oldest group in comparison to the later groups. These results indicate that in the Serbian skeletal sample from the Mesolithic-Neolithic to the Medieval times, malocclusions were present in the form of dentoalveolar Class II occlusion. Skeletal deep bite was found in the oldest group, while horizontal growth pattern decreased from prehistoric to the Medieval times. Samples were too small to confirm environmental impact on the vertical skeletal discrepancies.
Assuntos
Má Oclusão/história , Má Oclusão/patologia , Adolescente , Adulto , Antropologia Física , Cefalometria , Criança , Pré-Escolar , Oclusão Dentária , Feminino , História Antiga , História Medieval , Humanos , Lactente , Masculino , Mandíbula/anatomia & histologia , Pessoa de Meia-Idade , Sérvia , Adulto JovemRESUMO
OBJECTIVE: To investigate the long-term influence of fixed lingual retainers on the development of mandibular gingival recession and to compare the prevalence with untreated individuals. MATERIALS AND METHODS: The material consisted of 144 subjects: 96 orthodontically treated patients followed for 5 years after therapy and 48 untreated age-matched subjects. The treated patients were divided in two groups: one receiving a fixed mandibular retainer (n = 48) and one receiving no form of retention in the mandible (n = 48). The presence or absence of gingival recession and calculus accumulation were scored before treatment (T0), after debonding (T1), and 5 years after debonding (T5) for each tooth in the mandibular intercanine region using plaster models and intraoral photographs. The chi-square test, one-way ANOVA, and Cochran's Q test were used to evaluate inter- and intragroup differences. RESULTS: The prevalence of patients with recession increased gradually and significantly throughout the observation periods in all groups, but the intergroup differences at T5 were not significant. Significantly more calculus accumulation was observed at T5 in the retainer group compared with the group without retainers. CONCLUSIONS: Long-term presence of fixed lingual retainers does not seem to increase the development of mandibular gingival recession, but does increase calculus accumulation.
Assuntos
Retração Gengival/epidemiologia , Retração Gengival/etiologia , Contenções Ortodônticas/efeitos adversos , Adolescente , Criança , Cálculos Dentários/epidemiologia , Cálculos Dentários/etiologia , Placa Dentária/etiologia , Índice de Placa Dentária , Feminino , Humanos , Estudos Longitudinais , Masculino , Mandíbula/patologia , Índice de Higiene Oral , Desenho de Aparelho Ortodôntico , Ortodontia Corretiva/efeitos adversos , Ortodontia Corretiva/instrumentação , Índice Periodontal , Prevalência , Estudos Retrospectivos , Fatores de Tempo , Adulto JovemRESUMO
OBJECTIVE: Turner syndrome occurs in phenotypic females with complete or partial absence of X chromosome. The leading symptom is short stature, while numerous but mild stigmata manifest in the craniofacial region. These patients are commonly treated with growth hormone to improve their final height. The aim of this study was to assess the influence of long-term growth hormone therapy on craniofacial morphology in Turner syndrome patients. DESIGN: In this cross-sectional study cephalometric analysis was performed on 13 lateral cephalograms of patients with 45,X karyotype and the average age of 17.3 years, who have received growth hormone for at least two years. The control group consisted of 13 Turner syndrome patients naive to growth hormone treatment, matched to study group by age and karyotype. Sixteen linear and angular measurements were obtained from standard lateral cephalograms. Standard deviation scores were calculated in order to evaluate influence of growth hormone therapy on craniofacial components. RESULTS: In Turner syndrome patients treated with growth hormone most of linear measurements were significantly larger compared to untreated patients. Growth hormone therapy mainly influenced posterior face height, mandibular ramus height, total mandibular length, anterior face height and maxillary length. While the increase in linear measurements was evident, angular measurements and facial height ratio did not show statistically significant difference. Acromegalic features were not found. CONCLUSIONS: Long-term growth hormone therapy has positive influence on craniofacial development in Turner syndrome patients, with the greatest impact on posterior facial height and mandibular ramus. However, it could not compensate X chromosome deficiency and normalize craniofacial features.
Assuntos
Hormônio do Crescimento Humano/uso terapêutico , Desenvolvimento Maxilofacial/efeitos dos fármacos , Síndrome de Turner/tratamento farmacológico , Adolescente , Cefalometria , Estudos Transversais , Feminino , Humanos , Masculino , Resultado do Tratamento , Síndrome de Turner/diagnóstico por imagem , Adulto JovemRESUMO
INTRODUCTION: Dentofacial deformity, a deviation from normal facial proportions and dental relationships, is corrected by jaw repositioning in all three spatial planes, which changes the position and tension of the surrounding tissues, bones and muscles. These changes may also affect the dimensions of the pharyngeal airways (PA). OBJECTIVE: The aim of this study was to evaluate and compare three-dimensional PA changes in patients treated by a combination mandibular set-back/maxillary advancement versus patients that had bimaxillary advancement with genioplasty. METHODS: The sample consisted of 7 patients treated by combined mandibular set-back/maxillary advancement and 7 patients treated with bimaxillary advancement surgery. Nasopharyngeal (NP) volume, oropharyngeal (OP) volume and the area of maximum constriction (AMC) in the OP were measured on CBCT scans (2 mA/120 kV/12" FOV) taken before (T1) and 3 months after surgery (T2). Paired samples t-test was used for analyzing statistical significance of changes (p ≤ 0.05). RESULTS: OP volume and AMC increase after bimaxillary advancement was statistically significant, while for the mandibular set-back group the increase was non-significant. NP volume was not reduced in any of the two groups. No significant differences in PA dimensions were found between groups at neither T1 nor T2 time points. CONCLUSION: Results suggest that the combination of mandibular set-back/maxillary advancement did not reduce airway dimensions, while bimaxillary advancement surgery led to a statistically significant increase in the OP dimensions.
Assuntos
Cefalometria/métodos , Tomografia Computadorizada de Feixe Cônico/métodos , Processamento de Imagem Assistida por Computador/métodos , Má Oclusão Classe III de Angle/cirurgia , Faringe/diagnóstico por imagem , Adolescente , Adulto , Feminino , Seguimentos , Humanos , Masculino , Mandíbula/cirurgia , Cirurgia Ortognática/métodos , Faringe/patologia , Adulto JovemRESUMO
INTRODUCTION: Forces generated in orthodontic treatment with fixed appliances create tension and compression zones in the periodontal ligament resulting in a painful experience for patients. In the first phase of orthodontic treatment, when leveling of teeth is needed, nickel-titanium (NiTi) archwires can be completely engaged in brackets, even in the cases of extreme crowding, exerting small forces. There is a great individual variation in the pain perception related to the application of orthodontic forces. OBJECTIVE: The aim of this study was to investigate the pain perception among patients with dental crowding after insertion of six different NiTi orthodontic archwires as a part of fixed appliances in the first stage of orthodontic treatment. METHODS: The study was conducted on a sample of 189 orthodontic patients receiving one of six different either superelastic or heat activated NiTi archwires, in the first phase of orthodontic treatment. Pain perception was evaluated in groups of patients with different degree of crowding. The modified McGill Pain Questionnaire with Visual Analogue Scale was used to evaluate the quality and intensity of pain. Statistical analysis was performed using simple descriptive statistics, and Pearson's chi-square test with statistical significance of p<0.05. RESULTS: Majority of patients reported pain as discomfort or pressure of moderate intensity caused by chewing or biting, started within 12 hours, carried on for 3-4 days, and decreased over time without self-medication. CONCLUSION: No correlation was found between pain perception among patients with different types of NiTi archwires and the degree of crowdinq.
Assuntos
Má Oclusão/terapia , Fios Ortodônticos , Percepção da Dor , Dor/fisiopatologia , Adolescente , Adulto , Criança , Feminino , Humanos , Masculino , Dor/diagnóstico , Dor/etiologia , Medição da Dor , Adulto JovemRESUMO
INTRODUCTION: Anthropological studies show craniofacial changes with a reduction in teeth size during evolution of the human population. OBJECTIVE: The objective was to measure and compare the sizes of teeth in the population of the Mesolithic-Neolithic sites in the Iron Gate Gorge and the population from the Early Bronze Age site of Mokrin. METHODS: The study included teeth without advanced wear near the pulp. The material was divided according to the site of the skeletal population in two groups. Group 1 comprised 107 teeth from the Mesolithic-Neolithic sites Lepenski Vir and Vlasac. Group 2 included 158 teeth from the Mokrin graveyard dated in the Early Bronze Age. The mesio-distal diameter was measured in all teeth, while the vestibulo-oral diameter was measured in the molars only. Using the two-factor analysis of variance, the influence of sex, site and their interaction on the size of the teeth were investigated. RESULTS: The vestibulo-oral diameter of the upper third molar was significantly higher in males compared to females. The comparison between the groups showed that the vestibulooral diameter of the lower first molar was significantly higher in group 1. CONCLUSION: The present difference in teeth size indicates the existence of reduction during the prehistoric times. However, the time period between the populations studied is probably too short to be manifested on a large number of teeth.
Assuntos
Evolução Biológica , Odontometria , Paleodontologia , Feminino , História Antiga , Humanos , Masculino , Sérvia , Caracteres SexuaisRESUMO
INTRODUCTION: Therapy with fixed orthodontic appliances starts with bracket bonding and ends with debonding of brackets, leaving enamel surface varied. Objective The aim of this pilot study was to examine enamel surface before and after debonding of orthodontic brackets by the use of scanning electron microscopy (SEM). METHODS: Epoxy replicas of four patients' premolars indicated for therapy with fixed orthodontic appliances were made and brackets were bonded to their teeth with a different adhesives (Enlight, No-mix, Fuji Ortho LC and Heliosit Orthodontic) (n=4).Two months later, brackets on premolars were debonded and amounts of adhesive left on the tooth surfaces and the bracket bases were evaluated with the adhesive remnant index (ARI). After resin removal, epoxy replicas were made and the surface of premolars was evaluated with the enamel surface index (ESI). All replicas of premolars (n=32) were prepared for SEM examination and compared under different magnifications. Tooth damage was estimated based on correlation between ARItooth and ESI. RESULTS: Pearson's chi2 test showed no significant differences between ARItooth and ARIbracket of four materials used. Nonparametric correlations showed significant differences between ARItooth and ARIbracket, ESI and ARItooth, and between ESI and ARIbracket. Increasing of ARItooth is followed with the descent of ARIbracket and the ascent of ESI. Multivariate regression analysis showed a significant correlation between ESI and ARItooth. CONCLUSION: Most bond failures took place at enamel-adhesive interface. ARItooth was a predictor to enamel surface damage. The type of material did not affect enamel surface damage.