RESUMO
Despite decades of research, the dominant charge generation mechanism in organic bulk heterojunction (BHJ) devices is not completely understood. While the local dielectric environments of the photoexcited molecules are important for exciton dissociation, conventional characterizations cannot separately measure the polarizability of electron-donor and electron-acceptor, respectively, in their blends, making it difficult to decipher the spectrally different charge generation efficiencies in organic BHJ devices. Here, by spectrally resolved electroabsorption spectroscopy, we report extraction of the excited state polarizability for individual donors and acceptors in a series of organic blend films. Regardless of the donor and acceptor, we discovered that larger exciton polarizability is linked to larger π-π coherence length and faster charge transfer across the heterojunction, which fundamentally explains the origin of the higher charge generation efficiency near 100% in the BHJ photodiodes. We also show that the molecular packing of the donor and acceptor influence each other, resulting in a synergetic enhancement in the exciton polarizability.
RESUMO
Green ammonia is an efficient, carbon-free energy carrier and storage medium. The ammonia synthesis using green hydrogen requires an active catalyst that operates under mild conditions. The catalytic activity can be promoted by controlling the geometry and electronic structure of the active species. An exsolution process is implemented to improve catalytic activity by modulating the geometry and electronic structure of Ru. Ru nanoparticles exsolved on a BaCe0.9 Y0.1 O3-δ support exhibit uniform size distribution, 5.03 ± 0.91 nm, and exhibited one of the highest activities, 387.31 mmolNH3 gRu -1 h-1 (0.1 MPa and 450 °C). The role of the exsolution and BaCe0.9 Y0.1 O3-δ support is studied by comparing the catalyst with control samples and in-depth characterizations. The optimal nanoparticle size is maintained during the reaction, as the Ru nanoparticles prepared by exsolution are well-anchored to the support with in-plane epitaxy. The electronic structure of Ru is modified by unexpected in situ Ba promoter accumulation around the base of the Ru nanoparticles.
RESUMO
Color balance is a critical concept in the application of functional transparent polymers from a customer's standpoint. In this study, multiple polar and non-polar fluorescent dyes are embedded simultaneously for the first time in a polydimethylsiloxane (PDMS) polymer matrix. Five dyes successfully coexist with the optimum blending ratio. Furthermore, simultaneous dispersing of polar and non-polar dyes in the polymer is achieved. Absorption and photoluminescence characteristics of multiple fluorescent dyes in PDMS medium are systemically deconvoluted and discussed. The competitive average visible transmittance and color balance of synthesized multi-fluorescent dye embedded PDMS is demonstrated by high color rendering index and CIE color space coordinates close to the white point. Additionally, the luminescent solar concentrator device demonstrates improved power conversion efficiency and light utilization efficiency than the pure PDMS waveguide-based device. Moreover, the long-term storage stability is demonstrated successfully. The findings, therefore, demonstrate the applicability of multi-fluorescent dye embedded PDMS to advanced transparent devices.
RESUMO
Amorphous molybdenum sulfide (MoSx) has been identified as an excellent catalyst for the hydrogen evolution reaction (HER). It is still a challenge to prepare amorphous MoSx as a more active and stable catalyst for the HER. Here the amorphous MoSx catalysts are prepared on carbon fiber paper (CFP) substrates at 200 °C by a simple hydrothermal method using molybdic acid and thioacetamide. Because the CFP is intrinsically hydrophobic due to its graphene-like carbon structure, two kinds of hydrophilic pretreatment methods [plasma pretreatment (PP) and electrochemical pretreatment (EP)] are investigated to convert the hydrophobic surface of the CFP to be hydrophilic prior to the hydrothermal growth of MoSx. In the HER catalysis, the MoSx catalysts grown on the pretreated CFPs reach a cathodic current density of 10 mA/cm(2) at a much lower overpotential of 231 mV on the MoSx/EP-CFP and 205 mV on the MoSx/PP-CFP, compared to a high overpotential of 290 mV on the MoSx of the nonpretreated CFP. Turnover frequency per site is also significantly improved when the MoSx are grown on the pretreated CFPs. However, the Tafel slopes of all amorphous MoSx catalysts are in the range of 46-50 mV/dec, suggesting the Volmer-Heyrovsky mechanism as a major pathway for the HER. In addition, regardless of the presence or absence of the pretreatment, the hydrothermally grown MoSx catalyst on CFP exhibits such excellent stability that the degradation of the cathodic current density is negligible after 1000 cycles in a stability test, possibly due to the relatively high growth temperature.
RESUMO
Lead bromide-based perovskites are promising materials as the top cells of tandem solar cells and for application in various fields requiring high voltages owing to their wide band gaps and excellent environmental resistances. However, several factors, such as the formation of bulk and surface defects, impede the performances of corresponding devices, thereby limiting the efficiencies of these devices as single-junction devices. To reduce the number of defect sites, urea is added to the formamidinium lead bromide (FAPbBr3) perovskite material to increase its grain size. Nevertheless, urea undesirably reacts with lead(II) bromide (PbBr2) in the perovskite structure, creating unfavorable impurities in the device. To solve this problem, herein, in addition to urea, we introduced formamidinium chloride (FACl) into FAPbBr3. Owing to the synergistic effect of urea and FACl, the FAPbBr3 film quality effectively improved due to suppression of the generation of impurities and stabilization of film crystallinity. Consequently, the FAPbBr3 single-junction solar cell constructed using FACl and urea as additives demonstrated a power conversion efficiency of 9.6% and an open-circuit voltage of 1.516 V with negligible hysteresis. This study provides new insights into the use of additive engineering for overcoming the energy losses caused by defects in perovskite films.
RESUMO
The energy transition from fossil fuel-based to renewable energy is a global agenda. At present, a major concern in the green hydrogen economy is the demand for clean fuels and non-noble materials to produce hydrogen through water splitting. Researchers are focusing on addressing this concern with the help of the development of appropriate non-noble-based photo-/electrocatalytic materials. A new class of two-dimensional materials, MXenes, have recently shown tremendous potential for water splitting to produce H2via a photoelectrochemical process. The unique properties of emerging 2D MXene materials, such as hydrophilic surface functionalities, higher surface-to-volume ratios, and inherent flexibility, present these materials as appropriate photo-/electrocatalytic materials. Unique value addition and innovative strategies such as the introduction of end-group modification, heterojunctions, and nanostructure engineering have shown the potential of MXene materials as emerging photo-/electrocatalysts for water splitting. When integrated with conventional noble metal catalysts, MXene-based catalysts demonstrated a lower overpotential for hydrogen and oxygen evolution reactions and a remarkable boost in performance for enhanced H2 production rates surpassing those of pristine noble metal-based catalysts. These promote future perspectives for the utilization of chemically synthesized MXenes as alternative photo-/electrocatalysts. Future research direction should focus on MXene synthesis and utilization for surface modification, composite formation, stabilization, and optimization in synthesis methods and post-synthesis treatments. This review highlights the progress in the understanding of fundamental mechanisms and issues associated with water splitting, influencing factors of MXenes, their value addition role, and application strategies for water splitting, including performance, challenges, and outlook of MXene-based photo-/electrocatalysts, in the last five years.
RESUMO
The widespread commercialization of dye-sensitized solar cells (DSSCs) remains limited because of the use of highly volatile liquid electrolytes. Recently, gel-type quasi-solid electrolytes containing a polymer additive or inorganic nanomaterial have shown promising results in terms of the cell efficiency. However, most gel electrolytes have serious obstacles for pore-filling because of their high viscosity. Herein, we report the first observation of the transition from a liquid to a gel electrolyte after filling the cell with the liquid electrolyte using the controlled dissolution of polystyrene nanobeads on the counter electrode, suggesting that the pore-filling problem can be diminished in quasi-solid state DSSCs. The time-resolved solidification allows for the preparation of the gel electrolyte without interfering with the cell performance. The optimal DSSC composed of the gel electrolyte exhibits almost the same power conversion efficiency as the liquid electrolyte based DSSC when measured using an AM1.5G solar simulator at 100 mW/cm(2) light illumination. Moreover, the long-term stability of the DSSC was greatly improved.
RESUMO
The cesium lead iodide (CsPbI3) perovskite solar cell possesses a wide band gap ranging from 1.65 to 1.75 eV, which is suitable for integration into a tandem structure along with a low-band-gap silicon solar cell. Moreover, CsPbI3 has received considerable attention as a potential solution for the prevalent issues of low thermal stability of organic-inorganic perovskite solar cells and phase segregation encountered in conventional mixed halide wide-band-gap perovskite solar cells. Through the implementation of volatile additives, CsPbI3 has demonstrated substantial advancements in efficiency, process temperature, and stability. This study introduces a novel approach for barium (Ba)-doping by spraying an antisolvent containing barium bis(trifluoromethanesulfonimide) during the spin-coating process. By incorporating Ba2+ through this spraying technique, the formation of the delta phase in CsPbI3 is significantly suppressed; thereby, a power conversion efficiency of 18.56% is achieved, and a remarkable 93% of the initial efficiency is maintained after 600 h.
RESUMO
We have obtained high pressure H(2) isotherms with respect to the interlayer distance of multilayered graphene oxide (GO) modulated by thermal annealing. The maximum storage capacity is 4.8 (0.5) wt% at 77 K (298 K) and at 9.0 MPa pressure. We found the optimum GO interlayer distance for maximum H(2) uptake at 6.5 Å, similar to the predicted distances from first-principles calculations for graphite materials. Our results reveal that multilayered GO can be a practical material of choice to allow the use of graphene as a hydrogen storage material, provided that only small amounts of O and OH functional groups exist as spacers on GO sheets.
RESUMO
A Polymeric mirror from 1D photonic crystal exhibiting full specular reflection is applied on the exterior of the counter electrode of a dye-sensitized solar cells (DSSCs). Reflection of exiting light from the cell allows for the reuse of the light and thereby significantly increases the efficiency of the DSSCs (from 8.07% to 8.85%). Furthermore, it is also found to be effective even with incorporation of an internal scattering layer, which is widely used within a TiO2 anode layer for enhancing light trapping in DSSCs (from 9.17% to 9.53%).
RESUMO
Hybrid tandem solar cells offer the benefits of low cost and full solar spectrum utilization. Among the hybrid tandem structures explored to date, the most popular ones have four (simple stacking design) or two (terminal/tunneling layer addition design) terminal electrodes. Although the latter design is more cost-effective than the former, its widespread application is hindered by the difficulty of preparing an interface between two solar cell materials. The oldest approach to the in-series bonding of two or more bandgap solar cells relies on the introduction of a tunneling layer in multijunction III-V solar cells, but it has some limitations, e.g., the related materials/technologies are applicable only to III-V and certain other solar cells. Thus, alternative methods of realizing junction contacts based on the use of novel materials are highly sought after. Here, the strategies used to realize high-performance tandem cells are described, focusing on interface control in terms of bonding two or more solar cells for tandem approaches. The presented information is expected to aid the establishment of ideal methods of connecting two or more solar cells to obtain the highest performance for different solar cell choices with minimized energy loss through the interface.
RESUMO
Planar perovskite solar cells (PSCs) incorporating n-type SnO2 have attracted significant interest because of their excellent photovoltaic performance. However, the film fabrication of SnO2 is limited by self-aggregation and inhomogeneous growth of the intermediate phase, which produces poor morphology and properties. In this study, a self-controlled SnO2 layer is fabricated directly on a fluorine-doped tin oxide (FTO) surface through simple and rapid chemical bath deposition. The PSCs based on this hydrolyzed SnO2 layer exhibit an excellent power conversion efficiency of 20.21 % with negligible hysteresis. Analysis of the electrochemical impedance spectroscopy on the charge transport dynamics indicates that the bias voltage influences both interfacial charge transportation and the ionic double layer under illumination. The hydrolyzed SnO2 -based PSCs demonstrate a faster ionic charge response time of 2.5â ms in comparison with 100.5â ms for the hydrolyzed TiO2 -based hysteretic PSCs. The results of quasi-steady-state carrier transportation indicate that a dynamic hysteresis in the J-V curves can be explained by complex ionic-electronic kinetics owing to the slow ionic charge redistribution and hole accumulation caused by electrode polarization, which causes an increase in charge recombination. This study reveals that SnO2 -based PSCs lead to a stabilized dark depolarization process compared with TiO2 -based PSCs, which is relevant to the charge transport dynamics in the high-performing planar SnO2 -based PSCs.
RESUMO
The authors present the first reported use of vertically oriented titanium oxide nanotube/titanium oxide nanoparticle nanocomposites to improve the efficiency of TiO2 based dye-sensitized solar cells (DSSCs). Titanium oxide nanotubes incorporating titanium oxide nanoparticles were prepared to harvest more solar light, and their solar-to-electric conversion efficiency was characterized. The incorporation of the titanium oxide nanoparticles increased the visible light absorption of the titanium oxide nanotube based DSSC system because of the increased light absorption resulting from the increased surface area. However, the photocurrent enhancement was more obvious under the illumination of visible light with a wavelength longer than 550 nm owing to the light scattering effect of the titanium oxide nanoparticles.
RESUMO
Graphene and its derivatives have seen a rapid rise in interest as promising biomaterials especially in the field of tissue engineering, regenerative medicine, and cell biology of late. Despite its proven potential in numerous biological applications, information regarding the relationship between the different forms of graphene and cell lineages is still lacking partly due to its topical emergence in cellular studies. Herein, we explore the biocompatibility of four types of graphene substrates (chemical vapor deposition grown graphene, mechanically exfoliated graphene, chemically exfoliated graphene oxide, and reduced graphene oxide) with three types of somatic cells (keratinocytes, hepatocytes, endothelial cells) derived from the three germ layers in relation to cell adhesion, proliferation, morphology, and gene expression. The results revealed exceptional cell adhesion for all tested groups but enhanced proliferation and cytoskeletal interconnectivity in graphene oxide and reduced graphene oxide substrates. We were unable to detect any adverse effects in gene expression and survivability during a week of culture. We further show topographic changes to graphene substrates under fetal bovine serum adsorption to better illustrate the actual microenvironment of inhabitant cells. This study highlights the extraordinary synergy between graphene and somatic cells, suggesting the discretionary use of extracellular matrix components for in vitro cultivation.
Assuntos
Adesão Celular/efeitos dos fármacos , Proliferação de Células/efeitos dos fármacos , Grafite , Hepatócitos , Células Endoteliais da Veia Umbilical Humana , Queratinócitos , Grafite/química , Grafite/farmacologia , Hepatócitos/citologia , Hepatócitos/metabolismo , Células Endoteliais da Veia Umbilical Humana/citologia , Células Endoteliais da Veia Umbilical Humana/metabolismo , Humanos , Queratinócitos/citologia , Queratinócitos/metabolismoRESUMO
Organometallic halide perovskite solar cells (PSCs) have unique photovoltaic properties for use in next-generation solar energy harvesting systems. The highest efficiency of PSCs reached 22.1% on a laboratory scale of <0.1 cm2 device area. Thus, scaling up is the next step toward commercialization, but the difficulty in controlling the quality of large-area perovskite thin films remains a fundamental challenge. It has also been frequently reported that the J- V hysteresis is intensified in PSCs with areas larger than 1 cm2. In this study, we have fabricated a large-area perovskite layer using PbICl films, providing an intrinsic porous layer and enhancing the uniformity of the perovskite layer at areas larger than 1 cm2. Furthermore, we have investigated the polymeric properties of the prevalent hole-transporting material poly(triarylamine) (PTAA) with its photovoltaic performance. Two types of PTAAs, poly[bis(4-phenyl)(2,4-dimethylphenyl)amine] and poly[bis(4-phenyl)(2,4,6-trimethylphenyl)amine], were compared. A series of PTAAs with different molecular weights ( Mw) and polydispersity indices were studied, as the molecular weight of the PTAA is a key factor in determining the electrical properties and photovoltaic performance of the system. The fabricated PSCs with an aperture area of 1 cm2 based on a high-molecular-weight PTAA achieved a power conversion efficiency of 16.47% with negligible hysteresis and excellent reproducibility.
RESUMO
Stretchable gas sensors are important components of wearable electronic devices used for human safety and healthcare applications. However, the current low stretchability and poor stability of the materials limit their use. Here, we report a highly stretchable, stable, and sensitive NO2 gas sensor composed of reduced graphene oxide (RGO) sheets and highly elastic commercial yarns. To achieve high stretchability and good stability, the RGO sensors were fabricated using a pre-strain strategy (strain-release assembly). The fabricated stretchable RGO gas sensors showed high NO2 sensitivity (55% at 5.0 ppm) under 200% strain and outstanding mechanical stability (even up to 5000 cycles at 400% applied strain), making them ideal for wearable electronic applications. In addition, our elastic graphene gas sensors can also be woven into fabrics and clothes for the creation of smart textiles. Finally, we successfully fabricated wearable gas-sensing wrist-bands from superelastic graphene yarns and stretchable knits to demonstrate a wearable electronic device.
RESUMO
Despite the previous reports on the fabrication of CH3NH3PbI3-xClx films via sequential deposition, the positioning and formation of PbI2 in MAPbI3-xClx perovskite films made from the seed layer containing PbI2 and PbCl2 in different ratios have not yet been addressed. In this study, the PbI2 content in a perovskite absorber layer is controlled by changing the PbCl2 ratio in a PbI2-xClx seed layer. The addition of PbCl2 in the seed layer facilitates PbI2 generation and affects the morphology of the perovskite film. By integrating a perovskite absorber via the PbI2-xClx seed-layer into a solar cell, we investigated the effects of the correlation between the chlorine and PbI2 contents on the device performance through intensity-modulated photocurrent spectroscopy and intensity-modulated photovoltage spectroscopy. Elemental depth profiling analyses confirm that not only was the formed PbI2 preferentially located near the metal-oxide layer, but residual chlorine was adsorbed at the TiO2 layer. Our findings demonstrate that the geometric features of the formed PbI2 affected the perovskite solar cells according to the chlorine content, likely because of the elemental gradient induced by annealing. The PbI2-xClx-derived planar-heterojunction perovskite solar cells exhibited maximum power-conversion efficiencies of 17.56% at reverse scan and 17.21% at forward scan, suppressed current density-voltage hysteresis, and good performance distributions.
RESUMO
We report the performance of perovskite solar cells (PSCs) with an electron transport layer (ETL) consisting of a SnO2 thin film obtained by electrochemical deposition. The surface morphology and thickness of the electrodeposited SnO2 films were closely related to electrochemical process conditions, i.e., the applied voltage, bath temperature, and deposition time. We investigated the performance of PSCs based on the SnO2 films. Remarkably, the experimental factors that are closely associated with the photovoltaic performance were strongly affected by the SnO2 ETLs. Finally, to enhance the photovoltaic performance, the surfaces of the SnO2 films were modified slightly by TiCl4 hydrolysis. This process improves charge extraction and suppresses charge recombination.
RESUMO
Here, we fabricated high-performance gold/graphene yarns through a facile method by the electroless deposition of gold nanoparticles onto the surface of graphene yarns. The gold/graphene yarns are fabricated using a completely solution-based process that can be scaled up for practical applications. They possess high electrical conductivity (2.86 × 102 S cm-1) and good gravimetric specific conductivity (6.81 × 102 S cm2 g-1) as well as good reliability under 1000 bending tests with a maximum bending angle of 170° and 10 washing tests with laundry detergents. These stable conducting yarns could also be integrated into textiles and clothes in various forms to create smart fabrics and wearable devices. In addition, this facile approach is easily applicable to various graphene films and devices on soft substrates that are presently used in flexible/wearable electronics.
RESUMO
In the present study, we have synthesized high surface area MoS2 sponge electrodes via a facile hydrothermal method followed by a freeze drying process. The performance of the MoS2 based symmetric capacitor showed a high specific capacitance value of around 128 F g-1 at a scan rate of 2 mV s-1, and also a single electrode showed a specific capacitance of 510 F g-1, which is a remarkable value to be reported for a MoS2 based material in a symmetric device configuration. Also, a high energy density of around 6.15 Wh kg-1 and a good cyclic stability over 4000 cycles are obtained for the symmetrical cell.