Functionalized Concave Cube Gold Nanoparticles as Potent Antimicrobial Agents against Pathogenic Bacteria.

Gold (Au) is an inert metal in a bulk state; however, it can be used for the preparation of Au nanoparticles (i.e., AuNPs) for multidimensional applications in the field of nanomedicine and nanobiotechnology. Herein, monodisperse concave cube AuNPs (CCAuNPs) were synthesized and functionalized with a natural antioxidant lipoic acid (LA) and a tripeptide glutathione (GSH) because different crystal facets of AuNPs provide binding sites for distinct ligands. There was an ∼10 nm bathochromic shift of the UV-vis spectrum when CCAuNPs were functionalized with LA, and the size of the as-synthesized monodisperse CCAu nanoparticles was 76 nm. The LA-functionalized CCAu nanoparticles (i.e., CCAuLA) showed the highest antibacterial activity against Bacillus subtilis. Both fluorescence images and scanning electron microscopy images confirm the damage of the bacterial cell wall as the mode of antibacterial activity of CCAuNPs. CCAuNPs also cause the oxidation of bacterial cell membrane fatty acids to produce reactive oxygen species, which pave the way for the death of bacteria. Both CCAu nanoparticles and their functionalized derivatives showed excellent hemocompatibility (i.e., percentage of hemolysis is <5% at 80 µg of AuNPs) to human red blood cells and very high biocompatibility to HeLa, L929, and Chinese hamster ovary-green fluorescent protein (CHO-GFP) cells. Taken together, LA and GSH enhance the antibacterial activity and biocompatibility, respectively, of CCAu nanoparticles that interact with the bacteria through Coulomb as well as hydrophobic interactions before demonstrating antibacterial propensity.

Liquid Crystal-Mediated 3D Printing Process to Fabricate Nano-Ordered Layered Structures.

The emergence of three-dimensional (3D) printing promises a disruption in the design and on-demand fabrication of smart structures in applications ranging from functional devices to human organs. However, the scale at which 3D printing excels is within macro- and microlevels and principally lacks the spatial ordering of building blocks at nanolevels, which is vital for most multifunctional devices. Herein, we employ liquid crystal (LC) inks to bridge the gap between the nano- and microscales in a single-step 3D printing. The LC ink is prepared from mixtures of LCs of nanocellulose whiskers and large sheets of graphene oxide, which offers a highly ordered laminar organization not inherently present in the source materials. LC-mediated 3D printing imparts the fine-tuning required for the design freedom of architecturally layered systems at the nanoscale with intricate patterns within the 3D-printed constructs. This approach empowered the development of a high-performance humidity sensor composed of self-assembled lamellar organization of NC whiskers. We observed that the NC whiskers that are flat and parallel to each other in the laminar organization allow facile mass transport through the structure, demonstrating a significant improvement in the sensor performance. This work exemplifies how LC ink, implemented in a 3D printing process, can unlock the potential of individual constituents to allow macroscopic printing architectures with nanoscopic arrangements.

Low-Temperature Hydrogen Sensor: Enhanced Performance Enabled through Photoactive Pd-Decorated TiO2 Colloidal Crystals.

The high demand for H2 gas sensors is not just limited to industrial process control and leak detection applications but also extends to the food and medical industry to determine the presence of various types of bacteria or underlying medical conditions. For instance, sensing of H2 at low concentrations (<10 ppm) is essential for developing breath analyzers for the noninvasive diagnosis of some gastrointestinal diseases. However, there are major challenges to overcome in order to achieve high sensitivity and hence low limit of detection (LoD) toward H2. In this study, it is demonstrated that light-assisted amperometric gas sensors employing sensitive layers based on Pd-decorated TiO2 long-range ordered crystals can achieve excellent H2 sensing performance. This unique combination of materials and novel layered structure enables the detection of H2 gas down to 50 ppm with highly promising LoD capabilities. The sensor response profiles revealed that the sensor's signal-to-noise ratio was higher in the presence of light when operated with a 9 V bias (relative to other conditions used), producing a LoD of only 3.5 ppm at an operating temperature of 33 °C. The high performance of the sensor makes it attractive for applications that require low-level (ppm as opposed to conventional % levels) H2 gas detection. Most importantly, the developed sensor exhibited high selectivity (>93%) toward H2 over other gas species such as CO2, C4H8O, C3H6O, CH3CHO, and NO, which are commonly found to coexist in the environment.

Using colloidal lithography to control the formation of gas sorption sites through galvanic replacement reaction.

Using colloidal lithography, a series of inverted long-range ordered crystals (i-LROCs) of Pd honeycombs were fabricated on quartz crystal microbalance (QCM) sensors. The structures formed provided the required platform for the proceeding galvanic replacement reaction (GR) process to generate seamless Au nanoparticle deposits throughout the i-LROC. The results showed that controlling the dimensions of the pores in the developed Pd i-LROCs is important in the formation of gold deposition sites on the uniform structures through the GR reaction process. The developed Pd/Au i-LROC deposited sensors showed significant enhancement in the sensitivity toward Hg0 vapor when compared to pure Pd structures, with limit of detection improving from 60.0 to 13.7 µg/m3, respectively. Furthermore, a significant improvement in the modified sensor's selectivity toward Hg0 in the presence of other industrial related gas species was observed which is attributed to the addition of Au to the Pd structures through GR reaction.

Co3O4 needles on Au honeycomb as a non-invasive electrochemical biosensor for glucose in saliva.

While glucose monitoring technology is widely available, the continued prevalence of diabetes around the world coupled with its debilitating effects continues to grow. The significant limitations which exist in the current technology, instils the need for materials capable of non-invasive glucose detection. In this study a unique non-enzymatic electrochemical glucose sensor was developed, utilising a gold honeycomb-like framework upon which sharp Co3O4 needles are anchored. This composite nanomaterial demonstrates excellent sensing performance in glucose concentrations ranging between 20 µM and 4 mM, exceeding the range required for non-invasive glucose sensing. In conjunction with this high sensitivity (2.014 mA mM-1·cm-2), the material possesses excellent selectivity towards glucose for commonly interfering physiological species such as uric acid and ascorbic acid. Glucose detection in synthetic saliva was then performed showing excellent capability in the low concentration range (20 µM-1 mM) for non-invasive sensing performance. Further tests showed good selectivity of the sensor in physiological contaminants commonly found in saliva such as cortisol and dopamine. This development provides excellent scope to create next-generation non-invasive diabetes monitoring platforms, with excellent performance when detecting low glucose concentrations in complex solutions such as saliva.

Multi-directional electrodeposited gold nanospikes for antibacterial surface applications.

The incorporation of high-aspect-ratio nanostructures across surfaces has been widely reported to impart antibacterial characteristics to a substratum. This occurs because the presence of such nanostructures can induce the mechanical rupture of attaching bacteria, causing cell death. As such, the development of high-efficacy antibacterial nano-architectures fabricated on a variety of biologically relevant materials is critical to the wider acceptance of this technology. In this study, we report the antibacterial behavior of a series of substrata containing multi-directional electrodeposited gold (Au) nanospikes, as both a function of deposition time and precursor concentration. Firstly, the bactericidal efficacy of substrata containing Au nanospikes was assessed as a function of deposition time to elucidate the nanopattern that exhibited the greatest degree of biocidal activity. Here, it was established that multi-directional nanospikes with an average height of ∼302 nm ± 57 nm (formed after a deposition time of 540 s) exhibited the greatest level of biocidal activity, with ∼88% ± 8% of the bacterial cells being inactivated. The deposition time was then kept constant, while the concentration of the HAuCl4 and Pb(CH3COO)2 precursor materials (used for the formation of the Au nanospikes) was varied, resulting in differing nanospike architectures. Altering the Pb(CH3COO)2 precursor concentration produced multi-directional nanostructures with a wider distribution of heights, which increased the average antibacterial efficacy against both Gram-negative Pseudomonas aeruginosa and Gram-positive Staphylococcus aureus bacteria. Importantly, the in situ electrochemical fabrication method used in this work is robust and straightforward, and is able to produce highly reproducible antibacterial surfaces. The results of this research will assist in the wider utilization of mechano-responsive nano-architectures for antimicrobial surface technologies.

Functionalization of Elongated Tetrahexahedral Au Nanoparticles and Their Antimicrobial Activity Assay.

Gold nanoparticles are inert for the human body, and therefore, they have been functionalized to provide them with antibacterial properties. Here, elongated tetrahexahedral (ETHH) Au nanoparticles were synthesized, characterized, and functionalized with lipoic acid (LA), a natural antioxidant with a terminal carboxylic acid and a dithiolane ring, to generate ETHH-LA Au nanoparticles. The antioxidant activity of Au nanoparticles was investigated in vitro, showing that LA enhances the 2,2-diphenyl-1-picrylhydrazyl free-radical scavenging and Fe3+ ion reducing activity of ETHH-LA at higher amounts. The antimicrobial propensities of the nanoparticles were investigated against Gram-positive ( Bacillus subtilis) and Gram-negative ( Escherichia coli) bacteria through propidium iodide assay as well as disk diffusion assay. ETHH-LA Au nanoparticles showed significantly higher antimicrobial activity against B. subtilis compared with E. coli. Furthermore, ETHH-LA Au nanoparticles also showed significantly better antimicrobial activity against both bacterial strains when compared with ETHH. ETHH Au nanoparticles also bring about the oxidation of bacterial cell membrane fatty acids and produce lipid peroxides. ETHH-LA showed higher lipid peroxidation potential than that of ETHH against both bacteria tested. The hemolytic potential of Au nanoparticles was investigated using human red blood cells and ETHH-LA showed reduced hemolytic activity than that of ETHH. The cytotoxicity of Au nanoparticles was investigated using human cervical cancer cells, HeLa, and ETHH-LA Au nanoparticles showed reduced cytotoxicity than that of ETHH. Taken together, LA enhances the antimicrobial activity of ETHH Au nanoparticles and Au nanoparticles interact with the bacteria through electrostatic interactions as well as hydrophobic interactions and damage the bacterial cell wall followed by oxidation of cell membrane fatty acids.

Zinc Titanate Nanoarrays with Superior Optoelectrochemical Properties for Chemical Sensing.

In this report, the gas sensing performance of zinc titanate (ZnTiO3) nanoarrays (NAs) synthesized by coating hydrothermally formed zinc oxide (ZnO) NAs with TiO2 using low-temperature chemical vapor deposition is presented. By controlling the annealing temperature, diffusion of ZnO into TiO2 forms a mixed oxide of ZnTiO3 NAs. The uniformity and the electrical properties of ZnTiO3 NAs made them ideal for light-activated acetone gas sensing applications for which such materials are not well studied. The acetone sensing performance of the ZnTiO3 NAs is tested by biasing the sensor with voltages from 0.1 to 9 V dc in an amperometric mode. An increase in the applied bias was found to increase the sensitivity of the device toward acetone under photoinduced and nonphotoinduced (dark) conditions. When illuminated with 365 nm UV light, the sensitivity was observed to increase by 3.4 times toward 12.5 ppm acetone at 350 °C with an applied bias of 9 V, as compared to dark conditions. The sensor was also observed to have significantly reduced the adsorption time, desorption time, and limit of detection (LoD) when excited by the light source. For example, LoD of the sensor in the dark and under UV light at 350 °C with a 9 V bias is found to be 80 and 10 ppb, respectively. The described approach also enabled acetone sensing at an operating temperature down to 45 °C with a repeatability of >99% and a LoD of 90 ppb when operated under light, thus indicating that the ZnTiO3 NAs are a promising material for low concentration acetone gas sensing applications.

Oxygen-deficient photostable Cu2O for enhanced visible light photocatalytic activity.

Oxygen vacancies in inorganic semiconductors play an important role in reducing electron-hole recombination, which may have important implications in photocatalysis. Cuprous oxide (Cu2O), a visible light active p-type semiconductor, is a promising photocatalyst. However, the synthesis of photostable Cu2O enriched with oxygen defects remains a challenge. We report a simple method for the gram-scale synthesis of highly photostable Cu2O nanoparticles by the hydrolysis of a Cu(i)-triethylamine [Cu(i)-TEA] complex at low temperature. The oxygen vacancies in these Cu2O nanoparticles led to a significant increase in the lifetimes of photogenerated charge carriers upon excitation with visible light. This, in combination with a suitable energy band structure, allowed Cu2O nanoparticles to exhibit outstanding photoactivity in visible light through the generation of electron-mediated hydroxyl (OH˙) radicals. This study highlights the significance of oxygen defects in enhancing the photocatalytic performance of promising semiconductor photocatalysts.

Silicon as a ubiquitous contaminant in graphene derivatives with significant impact on device performance.

Silicon-based impurities are ubiquitous in natural graphite. However, their role as a contaminant in exfoliated graphene and their influence on devices have been overlooked. Herein atomic resolution microscopy is used to highlight the existence of silicon-based contamination on various solution-processed graphene. We found these impurities are extremely persistent and thus utilising high purity graphite as a precursor is the only route to produce silicon-free graphene. These impurities are found to hamper the effective utilisation of graphene in whereby surface area is of paramount importance. When non-contaminated graphene is used to fabricate supercapacitor microelectrodes, a capacitance value closest to the predicted theoretical capacitance for graphene is obtained. We also demonstrate a versatile humidity sensor made from pure graphene oxide which achieves the highest sensitivity and the lowest limit of detection ever reported. Our findings constitute a vital milestone to achieve commercially viable and high performance graphene-based devices.

1,4-Dihydropyrrolo[3,2-b]pyrroles as a Single Component Photoactive Layer: A New Paradigm for Broadband Detection.

Single component organic photodetectors capable of broadband light sensing represent a paradigm shift for designing flexible and inexpensive optoelectronic devices. The present study demonstrates the application of a new quadrupolar 1,4-dihydropyrrolo[3,2-b]pyrrole derivative with spectral sensitivity across 350-830 nm as a potential broadband organic photodetector (OPD) material. The amphoteric redox characteristics evinced from the electrochemical studies are exploited to conceptualize a single component OPD with ITO and Al as active electrodes. The photodiode showed impressive broadband photoresponse to monochromatic light sources of 365, 470, 525, 589, 623, and 830 nm. Current density-voltage (J-V) and transient photoresponse studies showed stable and reproducible performance under continuous on/off modulations. The devices operating in reverse bias at 6 V displayed broad spectral responsivity (R) and very good detectivity (D*) peaking a maximum 0.9 mA W-1 and 1.9 × 1010 Jones (at 623 nm and 500 µW cm-2) with a fast rise and decay times of 75 and 140 ms, respectively. Low dark current densities ranging from 1.8 × 10-10 Acm-2 at 1 V to 7.2 × 10-9 A cm-2 at 6 V renders an operating range to amplify the photocurrent signal, spectral responsivity, and detectivity. Interestingly, the fabricated OPDs display a self-operational mode which is rarely reported for single component organic systems.

Synergistic influence of polyoxometalate surface corona towards enhancing the antibacterial performance of tyrosine-capped Ag nanoparticles.

We illustrate a new strategy to improve the antibacterial potential of silver nanoparticles (AgNPs) by their surface modification with the surface corona of biologically active polyoxometalates (POMs). The stable POM surface corona was achieved by utilising zwitterionic tyrosine amino acid as a pH-switchable reducing and capping agent of AgNPs. The general applicability of this approach was demonstrated by developing surface coronas of phosphotungstic acid (PTA) and phosphomolybdic acid (PMA) around AgNPs. Our investigations on Gram negative bacterium Escherichia coli demonstrate that in conjugation with AgNPs, the surface corona of POMs enhances the physical damage to the bacterial cells due to synergistic antibacterial action of AgNPs and POMs, and the ability of tyrosine-reduced AgNPs (AgNPs(Y)) to act as an excellent carrier and stabiliser for the POMs. The further extension of this study towards Gram positive bacterium Staphylococcus albus showed a similar toxicity pattern, whereas these nanomaterials were found to be biocompatible for PC3 epithelial mammalian cells, suggesting the potential of these materials towards specific antimicrobial targeting for topical wound healing applications. The outcomes of this work show that facile tailorability of nanostructured surfaces may play a considerable role in controlling the biological activities of different nanomaterials.