Breaking the poverty trap in an ecologically fragile region through ecological engineering: A close-up look at long-term changes in ecosystem services.

Ecological vulnerability and poverty are interrelated and must be addressed together. The resolution of this issue will help us to meet the challenges during the process of implementing concrete actions for realizing the 2030 UN sustainable development goals (SDGs). Ecological restoration projects (ERPs) can enhance ecosystem services (ESs) while providing policy support for improving people's livelihoods. However, processes and mechanisms of ERPs on the ecological environment and socioeconomic development in poverty-stricken and ecologically fragile areas have rarely been studied. To address these issues, we conducted a comparative analysis on the changes of land use and land cover (LULC), ecosystem services (ESs), and socioeconomic development in Bijie City, a karst rocky desertification area in southwest China, before and after the implementation of ERPs in 2000, as well as the complex relationship between these factors. ERPs have affected LULCs, ESs, socioeconomics, and poverty reduction significantly since 2000. Specifically, the total ecosystem service value (ESV) in the study area has increased by more than 3 times in the past 30 years, with the ESV of tourism services and carbon storage increasing the most, from CNY 0.001 and 337.07 billion in 1990 to CNY 11.07 and 108.97 billion in 2019, respectively. The correlation between ESs is mainly synergistic, while the tradeoff between carbon storage and water yield is in a fluctuating upward trend. LULC conversion of cropland to green, and cropland to water, wetland and shrubs has positive effects on carbon storage and water yield, respectively. During study period, GDP, urbanization increased by over 70 times, 5 times, respectively, whereas poverty population, poverty incidence, and employment rate of various sectors (i.e., agriculture, forest, animal, and fishery, or AFAF) decreased by 96.4%, 97.7%, and 18.24%, respectively. Our findings emphasized that ERPs can effectively help poor and ecologically fragile areas to get out of the poverty trap and achieve the "win-win" goals of ecological and socio-economic sustainable development. These results have profound environmental management references to China and other developing countries around the world in realizing ecological restoration, poverty reduction, and the SDGs.

Phase-Inversion Induced 3D Electrode for Direct Acidic Electroreduction CO2 to Formic acid.

Direct electrochemical CO2 reduction to formic acid (FA) instead of formate is a challenging task due to the high acidity of FA and competitive hydrogen evolution reaction. Herein, 3D porous electrode (TDPE) is prepared by a simple phase inversion method, which can electrochemically reduce CO2 to FA in acidic conditions. Owing to interconnected channels, high porosity, and appropriate wettability, TDPE not only improves mass transport, but also realizes pH gradient to build higher local pH micro-environment under acidic conditions for CO2 reduction compared with planar electrode and gas diffusion electrode. Kinetic isotopic effect experiments demonstrate that the proton transfer becomes the rate-determining step at the pH of 1.8; however, not significant in neutral solution, suggesting that the proton is aiding the overall kinetics. Maximum FA Faradaic efficiency of 89.2% has been reached at pH 2.7 in a flow cell, generating FA concentration of 0.1 m. Integrating catalyst and gas-liquid partition layer into a single electrode structure by phase inversion method paves a facile avenue for direct production of FA by electrochemical CO2 reduction.

CO2 Electrolysis System under Industrially Relevant Conditions.

ConspectusCarbon dioxide emissions from consumption of fossil fuels have caused serious climate issues. Rapid deployment of new energies makes renewable energy driven CO2 electroreduction to chemical feedstocks and carbon-neutral fuels a feasible and cost-effective pathway for achieving net-zero emission. With the urgency of the net-zero goal, we initiated our research on CO2 electrolysis with emphasis on industrial relevance.The CO2 molecules are thermodynamically stable due to high activation energy of the two C═O bonds, and efficient electrocatalysts are required to overcome the sluggish dynamics and competitive hydrogen evolution reaction. The CO2 electrocatalysts that we have explored include molecular catalysts and nanostructured catalysts. Molecular catalysts are centered on earth abundant elements such as Fe and Co for catalyzing CO2 reduction, and using Fe catalysts, we proposed an amidation strategy for reduction of CO2 to methanol, bypassing the inactive formate pathway. For nanostructured catalysts, we developed a carbon enrichment strategy using nitrogen-rich nanomaterials for selective CO2 reduction.Direct CO2 electroreduction from the flue gas stream represents the "holy grail" in the field, because typical CO2 concentration in flue gas is only 6-15%, posing a significant challenge for CO2 electrolysis. On the other hand, direct electroreduction of CO2 in the flue gas eliminates the carbon capture process and simplifies the overall carbon capture and utilization (CCU) scheme. However, direct flue gas reduction is frustrated by the reactive oxygen (5-8%), low CO2 concentration (6-15%), and potentially toxic impurities. Surface CO2 enrichment catalysts with high O2 tolerance could be viable for achieving direct CO2 electroreduction for decarbonization of flue gas.In addition to the electrocatalysts, the incorporation of catalysts into the electrolyzer and development of a suitable process was also investigated to meet industrial demands. A membrane electrode assembly (MEA) is a zero-gap configuration with cathode and anode catalysts coated on either side of an ion exchange membrane. We adopted the MEA configuration due to the structural simplicity, low ohmic resistance, and high efficiency. The electrode factors (for example, membrane type, catalyst layer porosity, and MEA fabrication method) and the electrolyzer factors (for example, flow channels, gas diffusion layer) are critical to highly efficient operation. We separately developed an anion-exchange membrane-based system for CO production and cation-exchange membrane-based system for formate production. The optimized electrolyzer configuration can generate uniform current and voltage distribution in a large-area electrolyzer and operate using an industrial CO2 stream. The optimized process was developed with the targets of long-term continuous operation and no electrolyte consumption.

Tailored Bimetallic Ni-Sn Catalyst for Electrochemical Ammonia Oxidation to Dinitrogen with High Selectivity.

Direct electrochemical ammonia oxidation reaction (eAOR) is an efficient and sustainable strategy to process wastewater containing ammonia, and it endures overoxidation and severely competitive oxygen evolution reaction (OER). Herein, we synthesized a Ni(OH)2/SnO2 composite catalyst by a multistep strategy and applied it to the eAOR process. Ni(OH)2/SnO2 exhibited a N2-N Faradaic efficiency (FEN2-N) of 84.2%, with a N2 partial current density (jN2-N) of 2.7 mA cm-2 at 1.55 V vs reversible hydrogen electrode (RHE) in 0.5 M K2SO4 with 10 mM NH3-N (pH 11). The oxophilic Sn promoted NH3 absorption on Ni sites while suppressing the OER. As the active species, NiOOH accelerated the dimerization of intermediates (*NH2 or *NH) to form N2.

Twist angle and electric gating controllable electronic structure of the two-dimensional stacked BP homo-structure.

The boron phosphide (BP) van der Waals (vdW) homostructure is designed to construct high-performance nano-optoelectronic devices due to its distinctive photoelectric properties. Using density functional theory, the electronic properties of twisted and untwisted BP bilayer structures are systematically calculated. We found that the 0° structure is a direct band gap semiconductor with a type II band alignment, the carrier mobility of which is increased to 104, and its photoelectric conversion efficiency is 17.3%. By analyzing the band structure and exciton binding energy calculated at 0° under an electric field, it is further found that 0° is a superior photoelectric material. As for the twist BP bilayer, the band gap changes with torsional structures under the applied electric field, which generates the Stark effect. The twist angles of bilayer BP, specifically 13.17°, 21.79°, 38.21°, and 46.83°, always maintain a direct band gap under the influence of an electric field. While 60° is an indirect band gap, the structure exhibits high resistance to the electric field. Our results reveal that bilayer BP is a potential application prospect in photovoltaic and optoelectronic fields and can provide more insights into optoelectronic devices.

Laser interstitial thermal therapy in the treatment of brain metastases: the relationship between changes in postoperative magnetic resonance imaging characteristics and tumor recurrence.

BACKGROUND: Laser interstitial thermal therapy (LITT) has been used to treat brain metastases (BMs) in several countries, and its safety and effectiveness have been confirmed. In most cases, magnetic resonance imaging (MRI) reveals an increase in tumor volume with an enhanced margin after LITT. However, little is known about the relationship between this MRI change and tumor recurrence. OBJECTIVE: We report the first case series of BMs treated by LITT in China to evaluate the clinical characteristics and predictive factors of tumor recurrence. MATERIAL AND METHODS: Patients with less than four brain metastatic lesions and a Karnofsky performance status (KPS) > 70 were eligible for study inclusion. Standard LITT procedures were performed, and a follow-up MRI was performed to analyze the radiographic changes, especially the volume ratio of the enhanced margin and the whole lesion on MRI at 30 days postoperatively. All the volume-related data were delineated and calculated using 3D Slicer software. Related predictors were also collected to evaluate the correlation with local tumor control. RESULTS: Eighteen patients with nineteen lesions were enrolled for treatment and follow-up. Primary tumor histology included pulmonary carcinoma (n = 11) and breast cancer (n = 4). On average, the tumor size measured 3.01 cm3 (range, 0.40-7.40 cm3), the total ablation time was 13.58 min (range, 2.88-37.15 min), and the complete ablation rate was 92.4% (range, 29.2-100%). Comparing 3s0-day follow-up MRI results with preoperative MRI findings, 18 lesions showed a 2.28-fold (range, 1.21-4.88) volume increase; all the lesions displayed an enhanced component with a volume ratio of 42.35% (range, 10.14-100%). Five patients experienced tumor recurrence, and the local tumor control rates at 90 days and 180 days of follow-up were 68.4% and 66.7%, respectively. Univariate analysis indicated that the primary tumor, ablation rate, and enhanced volume ratio (EVR) > 40% in the 30-day MRI were associated with tumor recurrence, whereas multivariate analysis showed that only EVR > 40% was a predictive factor of local control. CONCLUSION: LITT is a minimally invasive method used to ablate brain metastases which can be used as the first-line treatment for BM patients under certain indications. After LITT, most tumors showed volume enlargement on the 30-day MRI scan, and EVR > 40% on the 30-day MRI may indicate late tumor recurrence.

Ultrasensitive Optical Fiber Sensors Working at Dispersion Turning Point: Review.

Optical fiber sensors working at the dispersion turning point (DTP) have served as promising candidates for various sensing applications due to their ultrahigh sensitivity. In this review, recently developed ultrasensitive fiber sensors at the DTP, including fiber couplers, fiber gratings, and interferometers, are comprehensively analyzed. These three schemes are outlined in terms of operation principles, device structures, and sensing applications. We focus on sensitivity enhancement and optical transducers, we evaluate each sensing scheme based on the DTP principle, and we discuss relevant challenges, aiming to provide some clues for future research.

Does living at high altitude increase the risk of bleeding events after total knee arthroplasty? A retrospective cohort study.

OBJECTIVE: Post-operative bleeding after total knee arthroplasty (TKA) is a frequent cause of post-operative complications. This study compared blood loss and indicators of coagulation and fibrinolysis between TKA patients living at low or high altitudes. METHODS: We retrospectively analyzed 120 patients at our institution who underwent primary TKA from May 2019 to March 2020, and we divided them into those living in areas about 500 m or > 3000 m above sea level. We compared the primary outcome of total blood loss between them. We also compared them in terms of several secondary outcomes: coagulation and fibrinolysis parameters, platelet count, reduction in hemoglobin, hidden blood loss, intra-operative blood loss, transfusion rate, and incidence of thromboembolic events and other complications. RESULTS: Total blood loss was significantly higher in the high-altitude group than in the low-altitude group (mean, 748.2 mL [95% CI, 658.5-837.9] vs 556.6 mL [95% CI, 496.0-617.1]; p = 0.001). The high-altitude group also showed significantly longer activated partial thromboplastin time, prothrombin time, and thrombin time before surgery and on post-operative day one, as well as increased levels of fibrinogen/fibrin degradation product on post-operative days one and three. Ecchymosis was significantly more frequent in the high-altitude group (41.7 vs 21.7%; relative risk (RR) = 1.923 [95% CI, 1.091-3.389]; p = 0.019). The two groups showed similar transfusion rates, and none of the patients experienced venous thromboembolism, pulmonary embolism, or infection. CONCLUSION: High altitude may alter coagulation and fibrinolysis parameters in a way that increases risk of blood loss after TKA. Such patients may benefit from special management to avoid bleeding events.

Phenolate-bonded bis(µ-oxido)-bis-copper(III) intermediates: hydroxylation and dehalogenation reactivities.

Exogenous phenolate ortho-hydroxylation by copper oxidants formed from dioxygen is generally thought to occur through one of two limiting mechanisms defined by the structure of the active oxidant: an electrophilic µ-η2:η2-peroxo-bis-copper(II) species as found in the oxygenated form of the binuclear copper enzyme tyrosinase (oxyTyr), or an isomeric bis(µ-oxido)-bis-copper(III) species (O) with ligated phenolate(s) as evidenced by most synthetic systems. The characterization of the latter is limited due to their limited thermal stability. This study expands the scope of an O species with ligated phenolate(s) using N,N'-di-tert-butyl-1,3-propanediamine (DBPD), a flexible secondary diamine ligand. Oxygenation of the [(DBPD)Cu(I)]1+ complex at low temperatures (e.g., 153 K) forms a spectroscopically and structurally faithful model to oxyTyr, a side-on peroxide intermediate, which reacts with added phenolates to form a bis(µ-oxido)-bis-copper(III) species with ligated phenolates, designated as an A species. The proposed stoichiometry of A is best understood as possessing 2 rather than 1 bonded phenolate. Thermal decomposition of A results in regiospecific phenolate ortho-hydroxylation with the ortho-substituent as either a C-H or C-X (Cl, Br) group, though the halogen displacement is significantly slower. DFT and experimental studies support an electrophilic attack of an oxide ligand into the π-system of a ligated phenolate. This study supports a hydroxylation mechanism in which O-O bond cleavage of the initially formed peroxide by phenolate ligation, which precedes phenolate aromatic hydroxylation.

A type-II NGyne/GaSe heterostructure with high carrier mobility and tunable electronic properties for photovoltaic application.

The two-dimensional heterostructures with type-II band alignment and super-high carrier mobility offer an updated perspective for photovoltaic devices. Here, based on the first-principles calculation, a novel vertical NGyne/GaSe heterostructure with an intrinsic type-II band alignment, super-high carrier mobility (104cm2V-1s-1), and strong visible to ultraviolet light absorption (104-105cm-1) is constructed. We investigate the electronic structure and the interfacial properties of the NGyne/GaSe heterostructure under electric field and strain. The band offsets and band gap of the NGyne/GaSe heterostructure can be regulated under applied vertical electric field and strain efficiently. Further study reveals that the photoelectric conversion efficiency of the NGyne/GaSe heterostructure is vastly improved under a negative electric field and reaches up to 25.09%. Meanwhile, near-free electron states are induced under a large applied electric field, leading to the NGyne/GaSe heterostructure transform from semiconductors to metal. Our results indicate that the NGyne/GaSe heterostructure will have extremely potential in optoelectronic devices, especially solar cells.

Blockchain Private File Storage-Sharing Method Based on IPFS.

Under the current national network environment, anyone can participate in publishing. As an important information resource, knowledge files reflect the workload of publishers. Moreover, high-quality knowledge files can promote the progress of society. However, pirated inferior files have the opposite effect. At present, most organizations use centralized servers to centrally manage the knowledge files released by users. In addition, it is necessary to introduce an untrusted third party to examine and encrypt the contents of files, which leads to an opaque process of file storage transactions, tampering with intellectual copyright, and the inability to have consistent systems of file management among institutions due to the lack of uniform standards for the same intellectual files. The purpose of this paper is to ensure the safe storage of knowledge files on the one hand and to realize efficient sharing of copyrighted files on the other hand. Therefore, this paper combines NDN (Named Data Network) technology with a distributed blockchain and an Interplanetary File System (IPFS) and proposes a blockchain knowledge file storage and sharing method based on an NDN. The method uses the NDN itself for the file content signature and encryption, thereby separating the file security and transmission process. At the same time, the method uses a flexible NDN reverse path forwarding and routing strategy, combining an IPFS private storage network to improve the safety of the encrypted data storage security. Finally, the method takes advantage of all participating nodes consensus and shares files in the synchronized blockchain to ensure traceability. This paper introduces the structure and principles of the method and describes the process of file upload and transfer. Finally, the performance of the method is compared and evaluated, and the advantages and disadvantages of the method and the future research direction are summarized.

N-acylhydrazones confer inhibitory efficacy against New Delhi metallo-ß-lactamase-1.

The expression of ß-lactamases, especially metallo-ß-lactamases (MßLs) in bacteria is one of the main causes of drug resistance. In this work, an effective N-acylhydrazone scaffold as MßL inhibitor was constructed and characterized. The biological activity assays indicated that the synthesized N-acylhydrazones 1-11 preferentially inhibited MßL NDM-1, and 1 was found to be the most effective inhibitor with an IC50 of 1.2 µM. Analysis of IC50 data revealed a structure-activity relationship, which is that the pyridine and hydroxylbenzene substituents at 2-position improved inhibition of the compounds on NDM-1. ITC and enzyme kinetics assays suggested that it reversibly and competitively inhibited NDM-1 (Ki = 0.29 ± 0.05 µM). The synthesized N-acylhydrazones showed synergistic antibacterial activities with meropenem, reduced 4-16-fold MIC of meropenem on NDM-1- producing E. coli BL21 (DE3), while 1 restored 4-fold activity of meropenem on K. pneumonia expressing NDM-1 (NDM-K. pneumoniae). The mice experiments suggested that 1 combined meropenem to fight against NDM-K. pneumoniae infection in the spleen and liver. Cytotoxicity assays showed that 1 and 2 have low cytotoxicity. This study offered a new framework for the development of NDM-1 inhibitors.

MR-guided 125I seed implantation treatment for maxillofacial malignant tumor.

PURPOSE: This study assessed the therapeutic efficacy of postoperative magnetic resonance (MR)-guided interstitial 125 I seed implantation for treatment of oral and maxillofacial malignant tumors. METHODS AND MATERIALS: A total of 127 patients with oral or maxillofacial malignant tumors were included in this study who received interstitial 125 I treatment after the surgery resection. Before implantation, all the patients received MR scans to assess the lesion scope, extent, and nature. 125 I implantation target regions were based on the pre-operative imaging. 125 I seeds were delivered to target regions via puncture needles under the real-time guidance of MR. Computed tomography (CT)or MR was performed immediately after implantation and again every 3 months later. RESULTS: After successful 125 I implantation, all patients were also examined regularly to detect tumor recurrence, lymphatic, and distant metastases. To date, CT or MR verification showed that 13/127 patients experienced tumor recurrence or lymphatic metastasis or distant metastasis. No seeds migration was observed, no serious treatment-related complications affected patient quality of life, and no important organ (such as major cervical vessels, spinal cord, etc.) injuries were observed. CONCLUSION: Our results show that MR-guided 125 I implantation is an effective approach to site-specific treatment for oral and maxillofacial tumor, which could potentially reduce postoperative complications and tumor recurrence rates, increase patient survival, and improve quality of life.

Comparison of unilateral and bilateral puncture percutaneous kyphoplasty in the treatment of osteoporotic vertebral compression fractures.

OBJECTIVES: To compare the clinical efficacy of unilateral and bilateral puncture PKP in the treatment of OVCFs and explored whether there is a difference in the efficacy of unilateral and bilateral puncture PKP after surgery. METHODS: A total of 98 patients with OVCFs treated by PKP from August 2016 to June 2018 were selected. There were 62 cases in the unilateral puncture group and 36 cases in the bilateral puncture group. The operation time, the amount of bone cement injection, the height of the anterior edge of the vertebral body and the visual analog scale (Visual Analog Scale, VAS) scores before and after the operation were analyzed, and whether the differences between the 2 groups were statistically significant was analyzed. RESULTS: All patients were followed up completely. The operation time and the number of X-ray fluoroscopies of the unilateral puncture group were significantly reduced compared to those of the bilateral group, and the difference was statistically significant (p<0.05). In terms of the bone cement injection volume, the average injection volume of the bilateral group was greater than that of the unilateral group, and the difference was statistically significant (p<0.05); the postoperative VAS scores of the 2 groups of patients were significantly improved, and the difference was statistically significant compared with that before surgery (p<0.05) but that of the unilateral group was not statistically significant compared with that of the bilateral group (p>0.05). The height of the anterior edge of the vertebral body in both groups was significantly improved compared with that before the operation, and the difference was statistically significant (p<0.05). CONCLUSION: Unilateral and bilateral puncture PKP can achieve good clinical efficacy in the treatment of osteoporotic vertebral compression fractures, but unilateral PKP has the advantages of short operation time and low X-ray exposure.

Well-Defined Single-Atom Cobalt Catalyst for Electrocatalytic Flue Gas CO2 Reduction.

Single-atom Co catalyst Co-Tpy-C with well-defined sites is synthesized by pyrolysis of a Co terpyridine (Tpy) organometallic complex. The Co-Tpy-C catalyst exhibits excellent activity for the electrochemical CO2 reduction reaction in aqueous electrolyte, with CO faradaic efficiency (FE) of over 95% from -0.7 to -1.0 V (vs RHE). By comparison, catalysts without Co or Tpy ligand added do not show any high CO FE. When simulated flue gas with 15% of CO2 is used as the source of CO2 , CO FE is kept at 90.1% at -0.5 V versus RHE. During gas phase flow electrolysis using simulated flue gas, the CO partial current density is further increased to 86.4 mA cm-2 and CO FE reached >90% at the cell voltage of 3.4 V. Experiments and density functional theory calculations indicate that uniform single-atom Co-N4 sites mainly contribute to the high activity for CO2 reduction.

Silver Nanoparticle Conjugated Star PCL-b-AMPs Copolymer as Nanocomposite Exhibits Efficient Antibacterial Properties.

The traditional antibiotics have specific intracellular targets and disinfect in chemical ways, and the drug-resistance induced by the antibiotics has grown into an emerging threat. It is urgent to call for novel strategies and antibacterial materials to control this situation. Herein, we report a class of silver-decorated nanocomposite AgNPs@PCL-b-AMPs as potent nanoantibiotic, constructed by ring-opening polymerization of the monomers ε-caprolactone, Z-Lys-N-carboxyanhydrides (NCAs), and Phe-NCAs, then decorated with AgNPs, and characterized by SEM, TEM, and DLS. The biological assays revealed that the nanocomposite possessed strong antibacterial efficacy against both Gram-positive and Gram-negative bacteria including clinical isolated bacteria MRSA, VRE, P. aeruginosa, and K. pneumonia, exhibiting a MIC value range in 2-8 µg/mL. Importantly, the S. aureus and P. aeruginosa treated with the nanocomposite did not show drug-resistance even after 21 passages. Also, in vivo anti-infective assays showed that the nanocomposite was able to effectively kill bacteria in the infected viscera of mice. The study of the sterilization mechanism showed that the nanocomposite exhibited a multimodal antimicrobial mechanism, including irreversibly damaging the membrane structure, making the leakage of intracellular ions and subsequently inducing generation of the reactive oxygen species (ROS), ultimately sterilizing the bacteria. The nanocomposite exhibits effective broad-spectrum antibacterial properties and shows low toxicity to the mammalian cells/animal. Overall, the AgNPs@PCL-b-AMPs gained in this work show great potential as a highly promising antibacterial material for biomedical applications including drug-resistant bacterial infection.

Prognostic value of H3K27me3 in children with ependymoma.

OBJECTIVE: To investigate the expression of H3K27me3 in different anatomical sites and analyze its prognostic value in children with ependymoma. METHODS: A total of 188 children diagnosed with ependymoma were admitted to the Department of Neurosurgery, Beijing Tiantan Hospital, Capital Medical University, between 2012 and 2017, and regular follow-up was conducted. Expression of H3K27me3 was analyzed by immunohistochemistry and scored semiquantitatively. The prognostic correlation was analyzed by Kaplan-Meier and Cox regression survival analyses. RESULTS: Of the 188 children with ependymoma, 61.7% were male, and the median and average age was five years (0-17 years) and 6.26 years, respectively. There were 65 cases of supratentorial ependymoma, 115 cases of infratentorial ependymoma, and 8 cases of spinal cord ependymoma. The median follow-up time was 39.95 months (0.3-90.19 months). Five-year progression-free survival (PFS) and overall survival (OS) were 48.5% and 61.4%, respectively. Kaplan-Meier univariate survival analysis showed that H3K27me3 expression had significant effects on PFS (P = 0.0003) and OS (P < 0.0001) in infratentorial ependymoma, but only affected OS (P = 0.03) in supratentorial ependymoma. CONCLUSION: In Chinese children, infratentorial ependymoma with incomplete resection and no adjuvant radiotherapy is associated with poor OS. On the other hand, low expression of H3K27me3 indicates poor prognosis of infratentorial ependymoma, but it has no significant prognostic value for supratentorial ependymoma. In addition, high expression of H3K27me3 in spinal ependymoma may indicate a better prognosis.

Machine-Learning Assisted Screening of Energetic Materials.

In this work, machine learning (ML), materials informatics (MI), and thermochemical data are combined to screen potential candidates of energetic materials. To directly characterize energetic performance, the heat of explosion ΔHe is used as the target property. The critical descriptors of cohesive energy, averaged over all constituent elements and the oxygen balance, are found by forward stepwise selection from a large number of possible descriptors. With them and a theoretically labeled ΔHe training data set, a satisfactory surrogate ML model is trained. The ML model is applied to large databases ICSD and PubChem to predict ΔHe. At the gross-level filtering by the ML model, 2732 molecular candidates based on carbon, hydrogen, nitrogen, and oxygen (CHNO) with high ΔHe values are predicted. Afterward, a fine-level thermochemical screening is carried out on the 2732 materials, resulting in 262 candidates with TNT equivalent power index Pe(TNT) greater than 1.5. Raising Pe(TNT) further to larger than 1.8, 29 potential candidates are found from the 2732 materials, all are new to the current reservoir of well-known energetic materials.

Clinical Characteristics and Surgical Features of Intracranial Fibrosarcoma.

BACKGROUND: Intracranial fibrosarcoma is an extremely rare neoplasm in the central nervous system. Insofar there were only sporadic case reports describing its features. The purpose of this study is to review the clinical and surgical features of cases who were treated in our department. METHOD: The authors retrospectively reviewed and detailed the clinical and surgical data obtained from 5 patients with fibrosarcoma who underwent treatment at our institute between January 2009 and January 2019. RESULTS: There were 3 males and 2 females including 2 juvenile and 3 senior patients. The most frequent sign was intermittent pain and vomiting. The location of the tumor included middle fossa, thalamus and midbrain, sellar and suprasellar region and right parietal-occipital lobe. Surgical observation demonstrated the consistency of the tumor was tenacious with abundant blood supply. Gross total resection was achieved in 2 cases. Pathological analysis showed spindle cells in a herringbone form with positive Vimentin staining in all 5 cases, with the absence of GFAP or S-100. All 5 patients were deceased eventually after a varied period of time after the first surgery. CONCLUSION: Intracranial fibrosarcoma was a highly malignant entity presented in the central nervous system. Surgery still remains the first-line treatment followed by radiotherapy, however, the prognostic outcome was very poor. Future studies should be more focused on accumulation of the relevant information on this disease thus hopefully in assisting to developing more optimized treatment.

Formation and Emissions of Volatile Organic Compounds from Homo-PP and Co-PP Resins during Manufacturing Process and Accelerated Photoaging Degradation.

Volatile organic compounds (VOCs) from polypropylene (PP) seriously restricts the application of PP in an automotive field. Herein, the traceability of VOCs from PP resins during manufacturing process and accelerated photoaging degradation was clarified on basis of an accurate characterization method of key VOCs. The influence of PP structures on changing the accelerated photoaging degradation on the VOCs was systematic. The VOCs were identified by means of Gas chromatography (GC) coupled with both a hydrogen flame ion detector (FID) and a mass spectrometry detector (MSD). Results showed that both the molecular structure of PP and the manufacturing process affected the species and contents of VOCs. In addition, the photoaging degradation of PP resulted in a large number of new emerged volatile carbonyl compounds. Our work proposed a possible VOC formation mechanism during the manufacturing and photoaging process. VOCs from PP resins were originated from oligomers and chain random scission during thermomechanical degradation. However, ß scission of alkoxy radical and Norrish tape I reactions of ketones via intermediate transition were probably the main VOCs formation routes towards PP during photoaging degradation. This work could provide scientific knowledge on both the accurate traceability of VOCs emissions and new technology for development of low-VOCs PP composites for vehicle.