RESUMO
We report an unsurpassed solution characterization technique based on analytical ultracentrifugation, which demonstrates exceptional potential for resolving particle sizes in solution with sub-nm resolution. We achieve this improvement in resolution by simultaneously measuring UV/Vis spectra while hydrodynamically separating individual components in the mixture. By equipping an analytical ultracentrifuge with a novel multi-wavelength detector, we are adding a new spectral discovery dimension to traditional hydrodynamic characterization, and amplify the information obtained by orders of magnitude. We demonstrate the power of this technique by characterizing unpurified CdTe nanoparticle samples, avoiding tedious and often impossible purification and fractionation of nanoparticles into apparently monodisperse fractions. With this approach, we have for the first time identified the pure spectral properties and band-gap positions of discrete species present in the CdTe mixture.
Assuntos
Compostos de Cádmio/química , Pontos Quânticos/química , Telúrio/química , Coloides/química , Hidrodinâmica , Tamanho da Partícula , Espectrofotometria Ultravioleta , UltracentrifugaçãoRESUMO
Microfluidics is an emerging field with various applications. In situ analysis of liquids inside microfluidic channels is an important research subject for any of these applications. On the other hand, attenuated total reflectance infrared spectroscopy (ATR-IR) is a strong surface detection method. Recently, there have been various attempts to use ATR-IR for detection of liquids inside microfluidic channels. Micromachined silicon ATR-IR (µSi-ATR-IR) is an emerging analytical tool for micro/nanofluidics. This paper reviews µSi-ATR-IR micro/nanofluidics detection devices and discusses the application fields, capabilities, advantages, and disadvantages of the method.
Assuntos
Técnicas Analíticas Microfluídicas/instrumentação , Nanotecnologia/instrumentação , Silício/química , Espectroscopia de Infravermelho com Transformada de Fourier/instrumentação , Desenho de Equipamento , Hidróxidos , Compostos de PotássioRESUMO
Attenuated total reflection-infrared (ATR-IR) spectroscopy is increasingly used to characterize solids and liquids as well as (catalytic) chemical conversion. Here we demonstrate that a piece of silicon wafer cut by a dicing machine or cleaved manually can be used as disposable internal reflection element (IRE) without the need for polishing and laborious edge preparation. Technical aspects, fundamental differences, and pros and cons of these novel disposable IREs and commercial IREs are discussed. The use of a crystal (the Si wafer) in a disposable manner enables simultaneous preparation and analysis of substrates and application of ATR spectroscopy in high temperature processes that may lead to irreversible interaction between the crystal and the substrate. As representative application examples, the disposable IREs were used to study high temperature thermal decomposition and chemical changes of polyvinyl alcohol (PVA) in a titania (TiO(2)) matrix and assemblies of 65-450 nm thick polystyrene (PS) films.
RESUMO
We present a micromachined silicon attenuated total reflection-infrared (ATR-IR) crystal with integrated nanofluidic glass channels which enables infrared spectroscopic studies with only 71 nL sample volume. Because of the short path length through silicon, the system allows IR spectroscopy down to 1200 cm(-1), which covers the typical fingerprint region of most organic compounds. To demonstrate proof-of-principle, the chip was used to study a Knoevenagel condensation reaction between malononitrile and p-anisaldehyde catalyzed by different concentrations of 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU) in solvent acetonitrile. By in situ measurement, it was demonstrated for the first time that at certain concentrations of DBU, reaction intermediates become stabilized, an effect that slows down or even stops the reaction. This is thought to be caused by increased ionic character of the solvent, in which protonated DBU stabilizes the intermediates. This clearly demonstrates that infrared mechanistic studies of chemical reactions are feasible in volumes as little as 71 nL.
RESUMO
Photoexcitation and charge carrier thermalization inside semiconductor photocatalysts are two important steps in solar fuel production. Here, photoexcitation and charge carrier thermalization in a silicon wafer are for the first time probed by a novel, yet simple and user-friendly Attenuated Total Reflectance Infrared spectroscopy (ATR-IR) system.
Assuntos
Semicondutores , Silício/química , Catálise , Elétrons , Nanopartículas Metálicas/química , Fótons , Energia Solar , Espectrofotometria Infravermelho , Titânio/químicaRESUMO
We report on the extensive characterization of single-walled carbon nanotubes (SWCNTs) dispersed in a variety of surfactants, such as sodium dodecyl benzene sulfonate (SDBS), sodium cholate (SC), and three synthesized perylene-based surfactants, by using differential sedimentation in H(2)O and D(2)O. Multidimensional evaluation of the absorption profiles over radius, wavelength, and time allows the determination of the anhydrous specific volumes of the SWCNT-surfactant complexes as well as the concentration of the surfactant reservoir in free micelles with very slow sedimentation coefficients (<1 Svedberg). Among the perylene bisimide surfactants, the smallest derivative is densely adsorbed on the nanotube backbone with an anhydrous specific volume significantly above that of SC or SDBS. Bulky Newkome dendritic groups on one or both ends of the perylene moiety gradually reduce the adsorption density, in accord with the absolute adsorption between 0.66 and 1.7 mmol surfactant per gram SWCNTs. Furthermore, hydrodynamic analysis reveals that SDBS favors the "tails-on" configuration. The distribution of sedimentation coefficients of SWCNTs prepared by high-pressure carbon monoxide decomposition (HiPco) is broader and shifted to faster sedimentation than those prepared by using cobalt-molybdenum catalysis (CoMoCAT), which reflects the polydispersity in diameter and length.
RESUMO
A multiwavelength UV/vis detector for the analytical ultracentrifuge (MWL-AUC) has been developed recently. In this work, beta-carotene-gelatin composite particles are investigated with MWL-AUC. Band centrifugation with a Vinograd cell is used to ensure maximum sample separation. Spectral changes of the system are observed in dependence of the sedimentation coefficient and are attributed to a previously unknown inhomogeneity of the beta-carotene chemical composition with both H- and J-aggregates coexisting in a mixture. In addition, our data suggest that pure H- and J-aggregates exist in a particle while their relative concentrations in a mixture determine the color characteristics of the sample. The unique abilities and properties of MWL-AUC include sedimentation coefficient distributions for all possible wavelengths, full UV/vis spectra of each different species in the mixture and 3D movies of the sedimentation process. These properties significantly extend the scope of the analytical ultracentrifuge technique and show that complex biopolymer multicomponent mixtures can be resolved into their individual species.
Assuntos
Gelatina/química , Ultracentrifugação , beta Caroteno/química , Absorção , Cor , Modelos Químicos , Análise Espectral/instrumentação , Análise Espectral/métodos , Ultracentrifugação/instrumentação , Ultracentrifugação/métodos , Raios Ultravioleta , Gravação em VídeoRESUMO
Progress in analytical ultracentrifugation (AUC) has been hindered by obstructions to hardware innovation and by software incompatibility. In this paper, we announce and outline the Open AUC Project. The goals of the Open AUC Project are to stimulate AUC innovation by improving instrumentation, detectors, acquisition and analysis software, and collaborative tools. These improvements are needed for the next generation of AUC-based research. The Open AUC Project combines on-going work from several different groups. A new base instrument is described, one that is designed from the ground up to be an analytical ultracentrifuge. This machine offers an open architecture, hardware standards, and application programming interfaces for detector developers. All software will use the GNU Public License to assure that intellectual property is available in open source format. The Open AUC strategy facilitates collaborations, encourages sharing, and eliminates the chronic impediments that have plagued AUC innovation for the last 20 years. This ultracentrifuge will be equipped with multiple and interchangeable optical tracks so that state-of-the-art electronics and improved detectors will be available for a variety of optical systems. The instrument will be complemented by a new rotor, enhanced data acquisition and analysis software, as well as collaboration software. Described here are the instrument, the modular software components, and a standardized database that will encourage and ease integration of data analysis and interpretation software.
Assuntos
Ultracentrifugação/instrumentação , Ultracentrifugação/métodos , Acesso à Informação , Simulação por Computador , Computadores , Comportamento Cooperativo , Internet , Dispositivos Ópticos , Processamento de Sinais Assistido por Computador , SoftwareRESUMO
The worldwide trend in nanoparticle technology toward increasing complexity must be directly linked to more advanced characterization methods of size, shape and related properties, applicable to many different particle systems in science and technology. Available techniques for nanoparticle characterization are predominantly focused on size characterization. However, simultaneous size and shape characterization is still an unresolved major challenge. We demonstrate that analytical ultracentrifugation with a multiwavelength detector is a powerful technique to address multidimensional nanoparticle analysis. Using a high performance optical setup and data acquisition software, information on size, shape anisotropy and optical properties were accessible in one single experiment with unmatched accuracy and resolution. A dynamic rotor speed gradient allowed us to investigate broad distributions on a short time scale and differentiate between gold nanorod species including the precise evaluation of aggregate formation. We report how to distinguish between different species of single-wall carbon nanotubes in just one experiment using the wavelength-dependent sedimentation coefficient distribution without the necessity of time-consuming purification methods. Furthermore, CdTe nanoparticles of different size and optical properties were investigated in a single experiment providing important information on structure-property relations. Thus, multidimensional information on size, density, shape and optical properties of nanoparticulate systems becomes accessible by means of analytical ultracentrifugation equipped with multiwavelength detection.
Assuntos
Nanopartículas/análise , Ultracentrifugação/métodos , Compostos de Cádmio/química , Ouro/química , Limite de Detecção , Nanopartículas/química , Nanotubos/química , Nanotubos de Carbono/química , Tamanho da Partícula , Razão Sinal-Ruído , Telúrio/químicaRESUMO
The optical setup and the performance of a prototype UV/Vis multiwavelength analytical ultracentrifuge (MWL-AUC) is described and compared to the commercially available Optima XL-A from Beckman Coulter. Slight modifications have been made to the optical path of the MWL-AUC. With respect to wavelength accuracy and radial resolution, the new MWL-AUC is found to be comparable to the existing XL-A. Absorbance accuracy is dependent on the light intensity available at the detection wavelength as well as the intrinsic noise of the data. Measurements from single flashes of light are more noisy for the MWL-AUC, potentially due to the absence of flash-to-flash normalization in the current design. However, the possibility of both wavelength and scan averaging can compensate for this and still give much faster scan rates than the XL-A. Some further improvements of the existing design are suggested based on these findings.