RESUMO
Piezoresponse force microscopy (PFM) is widely used for characterization and exploration of the nanoscale properties of ferroelectrics. However, quantification of the PFM signal is challenging due to the convolution of various extrinsic and intrinsic contributions. Although quantification of the PFM amplitude signal has received considerable attention, quantification of the PFM phase signal has not been addressed. A properly calibrated PFM phase signal can provide valuable information on the sign of the local piezoelectric coefficient-an important and nontrivial issue for emerging ferroelectrics. In this work, two complementary methodologies to calibrate the PFM phase signal are discussed. The first approach is based on using a standard reference sample with well-known independently measured piezoelectric coefficients, while the second approach exploits the electrostatic sample-cantilever interactions to determine the parasitic phase offset. Application of these methodologies to studies of the piezoelectric behavior in ferroelectric HfO2 -based thin-film capacitors reveals intriguing variations in the sign of the longitudinal piezoelectric coefficient, d33,eff . It is shown that the piezoelectric properties of the HfO2 -based capacitors are inherently sensitive to their thickness, electrodes, as well as deposition methods, and can exhibit wide variations including a d33,eff sign change within a single device.
RESUMO
Ferroelectric (FE) HfO2-based thin films, which are considered as one of the most promising material systems for memory device applications, exhibit an adverse tendency for strong imprint. Manifestation of imprint is a shift of the polarization-voltage (P-V) loops along the voltage axis due to the development of an internal electric bias, which can lead to the failure of the writing and retention functions. Here, to gain insight into the mechanism of the imprint effect in La-doped HfO2 (La:HfO2) capacitors, we combine the pulse switching technique with high-resolution domain imaging by means of piezoresponse force microscopy. This approach allows us to establish a correlation between the macroscopic switching characteristics and domain time-voltage-dependent behavior. It has been shown that the La:HfO2 capacitors exhibit a much more pronounced imprint compared to Pb(Zr,Ti)O3-based FE capacitors. Also, in addition to conventional imprint, which evolves with time in the poled capacitors, an easily changeable imprint, termed as "fluid imprint", with a strong dependence on the switching prehistory and measurement conditions, has been observed. Visualization of the domain structure reveals a specific signature of fluid imprint-continuous switching of polarization in the same direction as the previously applied field that continues a long time after the field was turned off. This effect, termed as "inertial switching", is attributed to charge injection and subsequent trapping at defect sites at the film-electrode interface.