Strategies for antimicrobial peptide coatings on medical devices: a review and regulatory science perspective.

Indwelling and implanted medical devices are subject to contamination by microbial pathogens during surgery, insertion or injection, and ongoing use, often resulting in severe nosocomial infections. Antimicrobial peptides (AMPs) offer a promising alternative to conventional antibiotics to reduce the incidence of such infections, as they exhibit broad-spectrum antimicrobial activity against Gram-negative and Gram-positive bacteria, microbial biofilms, fungi, and viruses. In this review-perspective, we first provide an overview of the progress made in this field over the past decade with an emphasis on the local release of AMPs from implant surfaces and immobilization strategies for incorporating these agents into a wide range of medical device materials. We then provide a regulatory science perspective addressing the characterization and testing of AMP coatings based on the type of immobilization strategy used with a focus on the US market regulatory niche. Our goal is to help narrow the gulf between academic studies and preclinical testing, as well as to support a future literature base in order to develop the regulatory science of antimicrobial coatings.

Laterally Confined Microfluidic Patterning of Cells for Engineering Spatially Defined Vascularization.

A biofabrication strategy for creating planar multiscale protein, hydrogel, and cellular patterns, and simultaneously generating microscale topographical features is developed that laterally confines the patterned cells and direct their growth in cell permissive hydrogels.

Biomarkers and diagnostic tools for detection of Helicobacter pylori.

Helicobacter pylori is responsible for worldwide chronic bacterial infection in humans affecting approximately half of the world's population. H. pylori is associated with significant morbidity and mortality including gastric cancer. The infection has both direct and indirect impacts on economic and overall well-being of patients; hence, there is a great need for diagnostic markers that could be used in the development of diagnostic kits. Here, we briefly review general aspects of H. pylori infection and the diagnostic biomarkers used in laboratory tests today with a focus on the potential role of microfluidic systems in future immunodiagnosis platforms.

Chitosan nanoparticles as adenosine carriers.

The objective of this research project was to evaluate the potential use of chitosan (CS) nanoparticles (NPs) as a drug delivery system for the molecule adenosine. Adenosine is an essential drug used for treating several health issues especially irregular heart rhythm. However, due to its extremely short half-life in vivo (<10 s), the effective delivery of adenosine in clinical applications is a significant challenge. In this research, adenosine was encapsulated into NPs formed by ionic gelation of CS. The encapsulation efficiency and loading capacity of 20% and 3% were obtained, respectively, by forming a complex between CS NPs and adenosine. The obtained CS NPs had a spherical shape in the size range of 260.6 ± 20.1 nm. Spectrophotometry analysis of the adenosine released in vitro showed an initial burst release phase, a plateau phase, followed by a steady release over a week.

(Bio)manufactured Solutions for Treatment of Bone Defects with Emphasis on US-FDA Regulatory Science Perspective.

Bone defects, with second highest demand for surgeries around the globe, may lead to serious health issues and negatively influence patient lives. The advances in biomedical engineering and sciences have led to the development of several creative solutions for bone defect treatment. This review provides a brief summary of bone graft materials, an organized overview of top-down and bottom-up (bio)manufacturing approaches, plus a critical comparison between advantages and limitations of each method. We specifically discuss additive manufacturing techniques and their operation mechanisms in detail. Next, we review the hybrid methods and promising future directions for bone grafting, while giving a comprehensive US-FDA regulatory science perspective, biocompatibility concepts and assessments, and clinical considerations to translate a technology from a research laboratory to the market. The topics covered in this review could potentially fuel future research efforts in bone tissue engineering, and perhaps could also provide novel insights for other tissue engineering applications.

How microbes read the map: Effects of implant topography on bacterial adhesion and biofilm formation.

Microbes have remarkable capabilities to attach to the surface of implanted medical devices and form biofilms that adversely impact device function and increase the risk of multidrug-resistant infections. The physicochemical properties of biomaterials have long been known to play an important role in biofilm formation. More recently, a series of discoveries in the natural world have stimulated great interest in the use of 3D surface topography to engineer antifouling materials that resist bacterial colonization. There is also increasing evidence that some medical device surface topographies, such as those designed for tissue integration, may unintentionally promote microbial attachment. Despite a number of reviews on surface topography and biofilm control, there is a missing link between how bacteria sense and respond to 3D surface topographies and the rational design of antifouling materials. Motivated by this gap, we present a review of how bacteria interact with surface topographies, and what can be learned from current laboratory studies of microbial adhesion and biofilm formation on specific topographic features and medical devices. We also address specific biocompatibility considerations and discuss how to improve the assessment of the anti-biofilm performance of topographic surfaces. We conclude that 3D surface topography, whether intended or unintended, is an important consideration in the rational design of safe medical devices. Future research on next-generation smart antifouling materials could benefit from a greater focus on translation to real-world applications.

Breathable hydrogel dressings containing natural antioxidants for management of skin disorders.

Traditional wound dressings are not effective enough to regulate the moisture content and remove excessive exudate from the environment. Wet wound dressings formed from hydrogels such as alginate are widely used in clinical practice for treatment of skin disorders. Here, we functionalize alginate dressings with natural antioxidants such as curcumin and t-resveratrol to render them both anti-inflammatory and antibacterial. The hydrogel maintains excellent mechanical properties and oxygen permeability over time. The release rate of the compounds from the hydrogels is assessed and their impact on bacterial and cellular growth is evaluated. The antioxidant compounds act as bactericidal agents and improve cell viability. The optimal concentration of active compounds in the engineered alginate-based dressings is determined.

Characterization, mechanistic analysis and improving the properties of denture adhesives.

OBJECTIVE: Denture adhesives are widely used to avoid the detachment and sliding of dentures. However, the adhesion properties can be affected by variation in mouth conditions such as the level of salivation. The objective of this study was to understand the effect of environmental conditions on the adhesion properties of a commercially available denture adhesive named as Poligrip® Free manufactured by GlaxoSmithKline Ltd., UK and to identify the reasons for the observed variation in its adhesion strength. METHODS: The failure mechanisms of denture adhesive have been assessed through using different physical, mechanical and thermal characterization experiments. All methods were used in different pH, temperatures, and salivation conditions and at the end, a strategy was proposed to overcome the failure of the paste in hyposalivation as well. RESULTS: In vitro models mimicking the denture gingival interface were designed to evaluate the adhesion properties of the investigated adhesive. Changes in the adhesion strength in response to three major factors related to the oral conditions including level of salivation, pH, and temperature were measured. The results of lap shear, tensile test, and internal interactions suggested a cohesion failure, where the lowest adhesion strength was due to hyposalivation. Fourier transform infrared spectroscopy (FTIR) and rheological analysis confirmed the importance of hydrogen bonds and hydration in the adhesion strength of the paste. SIGNIFICANCE: The investigated scenarios are widely observed in patient using denture adhesives and the clinical reports have indicated the inconsistency in adhesion strength of the commercial products. After identifying the potential reasons for such behavior, methods such as the addition of tripropylene glycol methyl ether (TPME) to enhance internal hydrogen bonds between the polymers are proposed to improve adhesion in the hyposalivation scenario.

Bioprinted Osteogenic and Vasculogenic Patterns for Engineering 3D Bone Tissue.

Fabricating 3D large-scale bone tissue constructs with functional vasculature has been a particular challenge in engineering tissues suitable for repairing large bone defects. To address this challenge, an extrusion-based direct-writing bioprinting strategy is utilized to fabricate microstructured bone-like tissue constructs containing a perfusable vascular lumen. The bioprinted constructs are used as biomimetic in vitro matrices to co-culture human umbilical vein endothelial cells and bone marrow derived human mesenchymal stem cells in a naturally derived hydrogel. To form the perfusable blood vessel inside the bioprinted construct, a central cylinder with 5% gelatin methacryloyl (GelMA) hydrogel at low methacryloyl substitution (GelMALOW ) was printed. We also develop cell-laden cylinder elements made of GelMA hydrogel loaded with silicate nanoplatelets to induce osteogenesis, and synthesized hydrogel formulations with chemically conjugated vascular endothelial growth factor to promote vascular spreading. It was found that the engineered construct is able to support cell survival and proliferation during maturation in vitro. Additionally, the whole construct demonstrates high structural stability during the in vitro culture for 21 days. This method enables the local control of physical and chemical microniches and the establishment of gradients in the bioprinted constructs.

Mussel-Inspired Multifunctional Hydrogel Coating for Prevention of Infections and Enhanced Osteogenesis.

Prevention of postsurgery infection and promotion of biointegration are the key factors to achieve long-term success in orthopedic implants. Localized delivery of antibiotics and bioactive molecules by the implant surface serves as a promising approach toward these goals. However, previously reported methods for surface functionalization of the titanium alloy implants to load bioactive ingredients suffer from time-consuming complex processes and lack of long-term stability. Here, we present the design and characterization of an adhesive, osteoconductive, and antimicrobial hydrogel coating for Ti implants. To form this multifunctional hydrogel, a photo-cross-linkable gelatin-based hydrogel was modified with catechol motifs to enhance adhesion to Ti surfaces and thus promote coating stability. To induce antimicrobial and osteoconductive properties, a short cationic antimicrobial peptide (AMP) and synthetic silicate nanoparticles (SNs) were introduced into the hydrogel formulation. The controlled release of AMP loaded in the hydrogel demonstrated excellent antimicrobial activity to prevent biofilm formation. Moreover, the addition of SNs to the hydrogel formulation enhanced osteogenesis when cultured with human mesenchymal stem cells, suggesting the potential to promote new bone formation in the surrounding tissues. Considering the unique features of our implant hydrogel coating, including high adhesion, antimicrobial capability, and the ability to induce osteogenesis, it is believed that our design provides a useful alternative method for bone implant surface modification and functionalization.

Engineering Photocrosslinkable Bicomponent Hydrogel Constructs for Creating 3D Vascularized Bone.

Engineering bone tissue requires the generation of a highly organized vasculature. Cellular behavior is affected by the respective niche. Directing cellular behavior and differentiation for creating mineralized regions surrounded by vasculature can be achieved by controlling the pattern of osteogenic and angiogenic niches. This manuscript reports on engineering vascularized bone tissues by incorporating osteogenic and angiogenic cell-laden niches in a photocrosslinkable hydrogel construct. Two-step photolithography process is used to control the stiffness of the hydrogel and distribution of cells in the patterned hydrogel. In addittion, osteoinductive nanoparticles are utilized to induce osteogenesis. The size of microfabricated constructs has a pronounced effect on cellular organization and function. It is shown that the simultaneous presence of both osteogenic and angiogenic niches in one construct results in formation of mineralized regions surrounded by organized vasculature. In addition, the presence of angiogenic niche improves bone formation. This approach can be used for engineered constructs that can be used for treatment of bone defects.

Hybrid Microscopy: Enabling Inexpensive High-Performance Imaging through Combined Physical and Optical Magnifications.

To date, much effort has been expended on making high-performance microscopes through better instrumentation. Recently, it was discovered that physical magnification of specimens was possible, through a technique called expansion microscopy (ExM), raising the question of whether physical magnification, coupled to inexpensive optics, could together match the performance of high-end optical equipment, at a tiny fraction of the price. Here we show that such "hybrid microscopy" methods--combining physical and optical magnifications--can indeed achieve high performance at low cost. By physically magnifying objects, then imaging them on cheap miniature fluorescence microscopes ("mini-microscopes"), it is possible to image at a resolution comparable to that previously attainable only with benchtop microscopes that present costs orders of magnitude higher. We believe that this unprecedented hybrid technology that combines expansion microscopy, based on physical magnification, and mini-microscopy, relying on conventional optics--a process we refer to as Expansion Mini-Microscopy (ExMM)--is a highly promising alternative method for performing cost-effective, high-resolution imaging of biological samples. With further advancement of the technology, we believe that ExMM will find widespread applications for high-resolution imaging particularly in research and healthcare scenarios in undeveloped countries or remote places.

Adenosine-associated delivery systems.

Adenosine is a naturally occurring purine nucleoside in every cell. Many critical treatments such as modulating irregular heartbeat (arrhythmias), regulation of central nervous system (CNS) activity and inhibiting seizural episodes can be carried out using adenosine. Despite the significant potential therapeutic impact of adenosine and its derivatives, the severe side effects caused by their systemic administration have significantly limited their clinical use. In addition, due to adenosine's extremely short half-life in human blood (<10 s), there is an unmet need for sustained delivery systems to enhance efficacy and reduce side effects. In this article, various adenosine delivery techniques, including encapsulation into biodegradable polymers, cell-based delivery, implantable biomaterials and mechanical-based delivery systems, are critically reviewed and the existing challenges are highlighted.

Multilayered coating on titanium for controlled release of antimicrobial peptides for the prevention of implant-associated infections.

Prevention of bacterial colonization and formation of a bacterial biofilm on implant surfaces has been a challenge in orthopaedic surgery. The treatment of implant-associated infections with conventional antibiotics has become more complicated by the emergence of multi-drug resistant bacteria. Antimicrobial eluting coatings on implants is one of the most promising strategies that have been attempted. This study reports a controlled release of an antimicrobial peptide (AMP) from titanium surface through a non-cytotoxic multilayered coating. Three layers of vertically oriented TiO2 nanotubes, a thin layer of calcium phosphate coating and a phospholipid (POPC) film were impregnated with a potent broad-spectrum AMP (HHC-36). The coating with controlled and sustained release of AMP was highly effective against both Gram-positive (Staphylococcus aureus) and Gram-negative (Pseudomonas aeruginosa) bacteria. No cytotoxicity to osteoblast-like cells (MG-63) was observed. Moderate platelet activation and adhesion on the implant surface with no observable activation in solution, and very low red blood cell lysis was observed on the implant. This multi-layer assembly can be a potential approach to locally deliver AMPs to prevent peri-implant infection in orthopaedics without being toxic to host cells.

Local delivery of antimicrobial peptides using self-organized TiO2 nanotube arrays for peri-implant infections.

Peri-implant infections have been reported as one of the major complications that lead to the failure of orthopedic implants. An ideal solution to the peri-implant infection is to locally deliver antimicrobial agents through the implant surface. The rising problem of infections caused by multiple antibiotic-resistant bacteria makes traditional antibiotics less desirable for the prevention of peri-implant infections. One of the promising alternatives is the family of antimicrobial peptides (AMPs). In this study, we report the local delivery of AMPs through the nanotubular structure processed on titanium surface. Self-organized and vertically oriented TiO2 nanotubes, about 80 nm in diameter and 7 µm thick, were prepared by the anodization technique. HHC-36 (KRWWKWWRR), one of the most potent broad-spectrum AMPs, was loaded onto the TiO2 nanotubes via a simple vacuum-assisted physical adsorption method. Antimicrobial activity testing against Gram-positive bacterium, Staphylococcus aureus, demonstrated that this AMP-loaded nanotubular surface could effectively kill the bacteria (≈ 99.9% killing) and reduce the total bacterial number adhered to the surface after 4 h of culture. In vitro AMP elution from the nanotubes was investigated using liquid chromatography-mass spectrometry (LC-MS). The release profiles strongly depended on the crystallinity of the TiO2 nanotubes. Anatase TiO2 nanotubes released significantly higher amounts of AMP than amorphous nanotubes during the initial burst release stage. Both followed almost the same slow release profile from 4 h up to 7 days. Despite the differences in release kinetics, no significant difference was observed between these two groups in bactericidal efficiency.

Drug release and bone growth studies of antimicrobial peptide-loaded calcium phosphate coating on titanium.

Preventing infection is one of the major challenges in total hip and joint arthroplasty. The main concerns of local drug delivery as a solution have been the evolution of antibiotic-resistant bacteria and the potential inhibition of osseointegration caused by the delivery systems. This work investigated the in vitro drug release, antimicrobial performance, and cytotoxicity, as well as the in vivo bone growth of an antimicrobial peptide loaded into calcium phosphate coated Ti implants in a rabbit model. Two potent AMP candidates (HHC36: KRWWKWWRR, Tet213: KRWWKWWRRC) were first investigated through an in vitro cytotoxicity assay. MTT absorbance values revealed that HHC36 showed much lower cytotoxicity (minimal cytotoxic concentration 200 µg/mL) than Tet 213 (50 µg/mL). The AMP HHC36 loaded onto CaP (34.7 ± 4.2 µg/cm(2)) had a burst release during the first few hours followed by a slow and steady release for 7 days as measured spectrophotometrically. The CaP-AMP coatings were antimicrobial against Staphylococcus aureus and Pseudomonas aeruginosa strains in colony-forming units (CFU) in vitro assays. No cytotoxicity was observed on CaP-AMP samples against MG-63 osteoblast-like cells after 5 days in vitro. In a trabecular bone growth in vivo study using cylindrical implants, loading of AMP HHC36 did not impair bone growth onto the implants. Significant bone on-growth was observed on CaP-coated Ti with or without HHC36 loading, as compared with Ti alone. The current AMP-CaP coating thus offers in vivo osteoconductivity to orthopedic implants. It also offers in vitro antimicrobial property, with its in vivo performance to be confirmed in future animal infection models.

The biocompatibility and biofilm resistance of implant coatings based on hydrophilic polymer brushes conjugated with antimicrobial peptides.

Bacterial colonization on implant surfaces and subsequent infections are one of the most common reasons for the failure of many indwelling devices. Several approaches including antimicrobial and antibiotic-eluting coatings on implants have been attempted; however, none of these approaches succeed in vivo. Here we report a polymer brush based implant coating that is non-toxic, antimicrobial and biofilm resistant. These coating consists of covalently grafted hydrophilic polymer chains conjugated with an optimized series of antimicrobial peptides (AMPs). These tethered AMPs maintained excellent broad spectrum antimicrobial activity in vitro and in vivo. We found that this specially structured robust coating was extremely effective in resisting biofilm formation, and that the biofilm resistance depended on the nature of conjugated peptides. The coating had no toxicity to osteoblast-like cells and showed insignificant platelet activation and adhesion, and complement activation in human blood. Since such coatings can be applied to most currently used implant surfaces, our approach has significant potential for the development of infection-resistant implants.

Antimicrobial peptides on calcium phosphate-coated titanium for the prevention of implant-associated infections.

Prevention of implant-associated infections has been one of the main challenges in orthopaedic surgery. This challenge is further complicated by the concern over the development of antibiotic resistance as a result of using traditional antibiotics for infection prophylaxis. The objective of this study was to develop a technique that enables the loading and local delivery of a unique group of cationic antimicrobial peptides (AMP) through implant surfaces. A thin layer of micro-porous calcium phosphate (CaP) coating was processed by electrolytic deposition onto the surface of titanium as the drug carrier. The broad spectrum AMP Tet213 (KRWWKWWRRC) was selected and loaded onto the CaP coating. SEM, XRD and FTIR analyses confirmed the CaP coating to be micro-porous octacalcium phosphate. By using a luminescence spectrometer technique, it was demonstrated that a 7 µm thick porous CaP coating could load up to 9 µg of AMP/cm² using a simple soaking technique. The drug-loaded CaP coating (CaP-Tet213) was not cytotoxic for MG-63 osteoblast-like cells. The CaP-Tet213 implants had antimicrobial activity against both Gram-positive (Staphylococcus aureus) and Gram-negative (Pseudomonas aeruginosa) bacteria with 106-fold reductions of both bacterial strains within 30 min as assessed by measuring colony-forming units (CFU). Repeated CFU assays on the same CaP-Tet213 specimen demonstrated retention of antimicrobial activity by the CaP-Tet213 surfaces through four test cycles. The susceptibility of bacteria to the CaP-Tet213 surfaces was also evaluated by assessing the inhibition of luminescence of P. aeruginosa containing a luxCDABE cassette at 4 h and 24 h with ∼92% and ∼77% inhibition of luminescence, respectively. It was demonstrated that CaP-Tet213 was a more efficient antimicrobial coating than CaP-MX226, CaP-hLF1-11 or CaP-tobramycin following incubation of CaP implants with equimolar concentrations of Tet213, the commercially developed antimicrobial peptide MX-226, hLF1-11 or tobramycin. A device coated with CaP-Tet213 could be a potential solution for the prevention of the peri-implant infection in orthopaedics.