Recent advances in the structure, synthesis, and applications of natural polymeric hydrogels.

Hydrogels, polymeric network materials, are capable of swelling and holding the bulk of water in their three-dimensional structures upon swelling. In recent years, hydrogels have witnessed increased attention in food and biomedical applications. In this paper, the available literature related to the design concepts, types, functionalities, and applications of hydrogels with special emphasis on food applications was reviewed. Hydrogels from natural polymers are preferred over synthetic hydrogels. They are predominantly used in diverse food applications for example in encapsulation, drug delivery, packaging, and more recently for the fabrication of structured foods. Natural polymeric hydrogels offer immense benefits due to their extraordinary biocompatible nature. Hydrogels based on natural/edible polymers, for example, those from polysaccharides and proteins, can serve as prospective alternatives to synthetic polymer-based hydrogels. The utilization of hydrogels has so far been limited, despite their prospects to address various issues in the food industries. More research is needed to develop biomimetic hydrogels, which can imitate the biological characteristics in addition to the physicochemical properties of natural materials for different food applications.

Photo-polymerizable ferrous sulfate liposomes as vehicles for iron fortification of food.

The development of photo-polymerizable ferrous sulfate liposomes has been perused for iron fortification of food. Iron fortification is accompanied by several limitations that reduce its quality as it provokes sensory problems due to the oxidation of Fe2+ into Fe3+. To overcome such undesirable effects and improve the bioavailability of iron, photo-polymerizable 1,2-bis(10,12-tricosadiynoyl)-sn-glycero-3-phosphocholine (DC8,9PC) phospholipids have been employed as iron delivery system. DC8,9PC possesses diacetylene groups that undergo intramolecular cross-linking following UV treatment, resulting in enhanced stability, high encapsulation efficiency (~91%) without inducing sensory changes during milk fortification, along with less oxidation and con-tent leakage after long term storage in ethanol. Furthermore, polymeric Fe-DC8,9PC liposomes present high in vivo iron bioavailability in hemoglobin (Hb)-repletion study in rats, with no indications of toxicity examined by hematoxylin-eosin test. This methodology offers great promise for a simple, reliable, cost-effective, and robust platform for treating iron deficiency anemia, seeking to bring its application toward market.

Create Nanoscale Patterns with DNA Origami.

Structural deoxyribonucleic acid (DNA) nanotechnology offers a robust platform for diverse nanoscale shapes that can be used in various applications. Among a wide variety of DNA assembly strategies, DNA origami is the most robust one in constructing custom nanoshapes and exquisite patterns. In this account, the static structural and functional patterns assembled on DNA origami are reviewed, as well as the reconfigurable assembled architectures regulated through dynamic DNA nanotechnology. The fast progress of dynamic DNA origami nanotechnology facilitates the construction of reconfigurable patterns, which can further be used in many applications such as optical/plasmonic sensors, nanophotonic devices, and nanorobotics for numerous different tasks.

Room Temperature Study of Seeding Growth on Two-Dimensional DNA Nanostructure.

Studying the self-assembly behavior of DNA origami allows a better understanding of molecular assembly characteristics at the nanoscale. Presently, the mechanisms governing growth and dynamics of DNA origami assembly are still not very clear and there is a lack of direct visualization of the growth processes on the long single-strand scaffold. Here, we investigate the kinetics, especially the real-time seeding growth process of six special designs of 2D DNA origami at room temperature (RT) without the assistance of denaturing chemicals. The prealignment of single-strand long scaffold and logical seeding growth behaviors are revealed during the growth process at RT. Furthermore, we studied the thermal stability of the DNA nanostructures under limited structural defects. Revealed characteristics of seeding growth can be used to build large and complex DNA nanodevices capable of performing logical operations with nanometer precision.

Label-free detection of biotoxins via a photo-induced force infrared spectrum at the single-molecular level.

There is an increasing urge to investigate facile solutions for monitoring biotoxins, which are a major concern in both the food safety and the anti-terrorism fields. Current techniques, such as immunochromatographic tests (ICT), enzyme-linked immunosorbent assay (ELISA) and mass spectrometry, are still insufficient to satisfy the needs for fast, label-free, and ultra-sensitive detection. Herein, a single-molecular, label-free detection method based on atomic force microscopy was employed to solve the abovementioned problem via a photo-induced force spectrum; typically, three important biotoxins, i.e. abrin toxin (ABR), ricin toxin (RT) and Clostridium perfringens exotoxin (ETX), were used for the demonstration of single molecule detection. The photo-induced force spectrum could be successfully obtained for each of the single protein particles with molecular weights down to 30 kDa. Furthermore, principal component analysis (PCA) was applied for each protein, resulting in a standard PCA identification database. Then, individual components in a mixture of these toxin proteins were well distinguished from each other via matching with the as-built database. Using this strategy, PiFM not only could be used as a powerful tool for single protein detection, but could also be used as a potential tool in protein structural analysis.

Physicochemical Analysis of DPPC and Photopolymerizable Liposomal Binary Mixture for Spatiotemporal Drug Release.

The development of a spatiotemporal drug delivery system with a long release profile, high loading efficiency, and robust therapeutic effects is still a challenge. Liposomal nanocarriers have secured a fortified position in the biomedical field over decades. Herein, liposomal binary mixtures of 1,2-dipalmitoyl- sn-glycero-3-phosphocholine (DPPC) and photopolymerizable 1,2-bis(10,12-tricosadiynoyl)- sn-glycero-3-phosphocholine (DC8,9PC) phospholipids were prepared for drug delivery applications. The diacetylenic groups of DC8,9PC produce intermolecular cross-linking following UV irradiation. Exposure of the liposomal mixture to 254 nm radiation induces a pore within the lipid bilayer, expediting the release of its entrapped 5,6-carboxyfluorescein dye. The dosage and rate of the released content are highly dependent on the number and size of the induced pore. Photochemical cross-linking studies at different exposure times were reported through the analysis of UV-visible spectrophotometry, nano differential scanning calorimetry, Fourier transform infrared spectroscopy, and Raman spectroscopy. The optimal irradiation time was established after 8 min of exposure, inducing lipid cross-linking with minimal oxidative degradation, which plays an essential role in the pathogenesis of numerous diseases due to the formation of primary and secondary oxidation products, accordingly reducing the encapsulated drug therapeutic level.

Subpicomolar Iron Sensing Platform Based on Functional Lipid Monolayer Microarrays.

We report herein the fabrication of novel microarrays based on air-stable functional lipid monolayers over silicon using a combination of e-beam lithography and lift-off. We demonstrate these microarrays can be use as ultrasensitive platform for Kelvin probe force microscopy in sensing experiments. Specificity of the detection is given by the functional group grafted at the lipid headgroup. The arrays developed for the detection of ferric ions, Fe(3+), using a γ-pyrone derivative chelator, demonstrate subpicomolar limit of detection with high specificity. In addition, the technique takes advantage of the structure of the array with the silicon areas playing the role of reference for the measurement, and we determine critical pattern dimensions below which the probe size/shape impacts the measured results.

L-Theanine: A Unique Functional Amino Acid in Tea (Camellia sinensis L.) With Multiple Health Benefits and Food Applications.

Tea (Camellia sinensis L.) is a very popular health drink and has attracted increasing attention in recent years due to its various bioactive substances. Among them, L-theanine, a unique free amino acid, is one of the most important substances in tea and endows tea with a special flavor. Moreover, L-theanine is also a bioactive compound with plenty of health benefits, including antioxidant, anti-inflammatory, neuroprotective, anticancer, metabolic regulatory, cardiovascular protective, liver and kidney protective, immune regulatory, and anti-obesity effects. Due to the unique characteristics and beneficial functions, L-theanine has potential applications in the development of functional foods. This review summarized the influencing factors of L-theanine content in teas, the main health benefits and related molecular mechanisms of L-theanine, and its applications in food, understanding of which can provide updated information for the further research of L-theanine.

Guided mode resonance sensor for the parallel detection of multiple protein biomarkers in human urine with high sensitivity.

The rising cost of global healthcare provision and new approaches to managing disease are driving the development of low-cost biosensing modalities, such as label-free photonic methods based on dielectric resonances. Here, we use the combined sensing and imaging capability of a guided mode resonance (GMR) sensor to detect multiple biomarkers (troponin, procalcitonin and C-Reactive Protein) in parallel in undiluted urine samples. A key requirement of such a biosensor is the simple and direct functionalization with suitable antibodies to ensure the disease-specific detection of protein biomarkers. Here, antibodies were immobilized using a succinimidyl-[(N-maleimidopropionamido)-hexaethyleneglycol] ester (SM(PEG)6) spacer. The polyethylene glycol (PEG) chemistry enables low detection limits of 10 pg mL-1 or better for all protein biomarkers, while minimizing non-specific binding compared to more commonly used strategies such as (3-Aminopropyl)triethoxysilane (APTES) or dextran. Our approach supports the vision of a simple yet highly sensitive diagnostic platform that could be used for pre-screening patients for a wide range of diseases at point-of-care, thereby relieving the pressure on overstretched healthcare services.