Boron Neutron Capture Therapy Enhanced by Boronate Ester Polymer Micelles: Synthesis, Stability, and Tumor Inhibition Studies.

Boron neutron capture therapy (BNCT) targets invasive, radioresistant cancers but requires a selective and high B-10 loading boron drug. This manuscript investigates boron-rich poly(ethylene glycol)-block-(poly(4-vinylphenyl boronate ester)) polymer micelles synthesized via atom transfer radical polymerization for their potential application in BNCT. Transmission electron microscopy (TEM) revealed spherical micelles with a uniform size of 43 ± 10 nm, ideal for drug delivery. Additionally, probe sonication proved effective in maintaining the micelles' size and morphology postlyophilization and reconstitution. In vitro studies with B16-F10 melanoma cells demonstrated a 38-fold increase in boron accumulation compared to the borophenylalanine drug for BNCT. In vivo studies in a B16-F10 tumor-bearing mouse model confirmed enhanced tumor selectivity and accumulation, with a tumor-to-blood (T/B) ratio of 2.5, surpassing BPA's T/B ratio of 1.8. As a result, mice treated with these micelles experienced a significant delay in tumor growth, highlighting their potential for BNCT and warranting further research.

Exploring Bioactive Phytomedicines for Advancing Pulmonary Infection Management: Insights and Future Prospects.

Pulmonary infections have a profound influence on global mortality rates. Medicinal plants offer a promising approach to address this challenge, providing nontoxic alternatives with higher levels of public acceptance and compliance, particularly in regions where access to conventional medications or diagnostic resources may be limited. Understanding the pathophysiology of viruses and bacteria enables researchers to identify biomarkers essential for triggering diseases. This knowledge allows the discovery of biological molecules capable of either preventing or alleviating symptoms associated with these infections. In this review, medicinal plants that have an effect on COVID-19, influenza A, bacterial and viral pneumonia, and tuberculosis are discussed. Drug delivery has been briefly discussed as well. It examines the effect of bioactive constituents of these plants and synthesizes findings from in vitro, in vivo, and clinical studies conducted over the past decade. In conclusion, many medicinal plants can be used to treat pulmonary infections, but further in-depth studies are needed as most of the current studies are only at preliminary stages. Extensive investigation and clinical studies are warranted to fully elucidate their mechanisms of action and optimize their use in clinical practice.

Three-Dimensional Printing Quality Inspection Based on Transfer Learning with Convolutional Neural Networks.

Fused deposition modeling (FDM) is a form of additive manufacturing where three-dimensional (3D) models are created by depositing melted thermoplastic polymer filaments in layers. Although FDM is a mature process, defects can occur during printing. Therefore, an image-based quality inspection method for 3D-printed objects of varying geometries was developed in this study. Transfer learning with pretrained models, which were used as feature extractors, was combined with ensemble learning, and the resulting model combinations were used to inspect the quality of FDM-printed objects. Model combinations with VGG16 and VGG19 had the highest accuracy in most situations. Furthermore, the classification accuracies of these model combinations were not significantly affected by differences in color. In summary, the combination of transfer learning with ensemble learning is an effective method for inspecting the quality of 3D-printed objects. It reduces time and material wastage and improves 3D printing quality.

Validation of a 'Work Readiness Scale' for health professional (HP) graduates.

BACKGROUND: There is a continuing concern about how graduate work readiness (WR) reflects on the success of universities meeting the requirements of employment. This study is to establish a valid and reliable instrument measuring WR in health professions (HP) graduates of medicine, pharmacy and dentistry. METHODS: The study from March 2016 to April 2017 was conducted to validate the 'Work Readiness Scale' (WRS; Deakin University) using Principal Component Analysis and Cronbach - α for internal consistency. It was modified to a four-item even-point scale and distributed as an online survey to 335 final year students of the three programs. RESULTS: A reduction from 64 to 53 items provided good internal consistency in all factors: WC 0.85, OA 0.88, SI 0.88 and PC 0.71. The PC domain had the greatest item reduction from 22 to 6, whilst the SI domain increased in items from 8 to 19. These changes may be associated with difference in understanding or interpretation of the items in the SI domain. CONCLUSION: The modified WRS can be used to evaluate job readiness in HP graduates. However, it needs further refinement and validation in specific educational and employment contexts.

Importing Automated Management System to Improve the Process Efficiency of Dental Laboratories.

Dental laboratories require manpower resources for manufacturing prostheses and inventory management. In this paper, we developed an automated inventory management system for dental laboratories to improve the production efficiency. A sensing system was developed based on the framework of Internet of things to collect the information of cobalt-chromium disks both in the storage room and manufacturing area, and an expert system was developed to automatically conduct inventory management based on the established rules. The proposed system can reduce the time of recording data and also assist the manager in configuring and managing material orders. The experimental results showed that a large amount of working time is reduced, resulting in the benefits of saving money and improving efficiency in dental manufacturing.

Digital Microfluidics: A New Paradigm for Radiochemistry.

The emerging technology of digital microfluidics is opening up the possibility of performing radiochemistry at the microliter scale to produce tracers for positron emission tomography (PET) labeled with fluorine-18 or other isotopes. Working at this volume scale not only reduces reagent costs but also improves specific activity (SA) by reducing contamination by the stable isotope. This technology could provide a practical means to routinely prepare high-SA tracers for applications such as neuroimaging and could make it possible to routinely achieve high SA using synthesis strategies such as isotopic exchange. Reagent droplets are controlled electronically, providing high reliability, a compact control system, and flexibility for diverse syntheses with a single-chip design. The compact size may enable the development of a self-shielded synthesizer that does not require a hot cell. This article reviews the progress of this technology and its application to the synthesis of PET tracers.

Micro-chemical synthesis of molecular probes on an electronic microfluidic device.

We have developed an all-electronic digital microfluidic device for microscale chemical synthesis in organic solvents, operated by electrowetting-on-dielectric (EWOD). As an example of the principles, we demonstrate the multistep synthesis of [(18)F]FDG, the most common radiotracer for positron emission tomography (PET), with high and reliable radio-fluorination efficiency of [(18)F]FTAG (88 ± 7%, n = 11) and quantitative hydrolysis to [(18)F]FDG (> 95%, n = 11). We furthermore show that batches of purified [(18)F]FDG can successfully be used for PET imaging in mice and that they pass typical quality control requirements for human use (including radiochemical purity, residual solvents, Kryptofix, chemical purity, and pH). We report statistical repeatability of the radiosynthesis rather than best-case results, demonstrating the robustness of the EWOD microfluidic platform. Exhibiting high compatibility with organic solvents and the ability to carry out sophisticated actuation and sensing of reaction droplets, EWOD is a unique platform for performing diverse microscale chemical syntheses in small volumes, including multistep processes with intermediate solvent-exchange steps.

Enhancing Cancer Therapy: Boron-Rich Polyboronate Ester Micelles for Synergistic Boron Neutron Capture Therapy and PD-1/PD-L1 Checkpoint Blockade.

Malignant cancers, known for their pronounced heterogeneity, pose substantial challenges to monotherapeutic strategies and contribute to the risk of metastasis. Addressing this, our study explores the synergistic potential of combining boron neutron capture therapy (BNCT) with immune checkpoint blockade to enhance cancer treatment efficacy. We synthesized boron-rich block copolymer micelles as a novel boron drug for BNCT. Characterization was conducted using nuclear magnetic resonance, gel-permeation chromatography, transmission electron microscopy, and dynamic light scattering. These micelles, with an optimal size of 91.3 nm and a polydispersity index of 0.18, are suitable for drug delivery applications. In vitro assessments on B16-F10 melanoma cells showed a 13-fold increase in boron uptake with the micelles compared to borophenyl alanine (BPA), the conventional boron drug for BNCT. This resulted in a substantial increase in BNCT efficacy, reducing cell viability to 77% post-irradiation in micelle-treated cells, in contrast to 90% in BPA-treated cells. In vivo, melanoma-bearing mice treated with these micelles exhibited an 8-fold increase in boron accumulation in tumor tissues versus those treated with BPA, leading to prolonged tumor growth delay (5.4 days with micelles versus 3.3 days with BPA). Moreover, combining BNCT with anti-PD-L1 immunotherapy further extended the tumor growth delay to 6.6 days, and enhanced T-cell infiltration and activation at tumor sites, thereby indicating a boosted immune response. This combination demonstrates a promising approach by enhancing cytotoxic T-cell priming and mitigating the immunosuppressive effects of melanoma tumors.

Optimization of microfluidic PET tracer synthesis with Cerenkov imaging.

Microfluidic technologies provide an attractive platform for the synthesis of radiolabeled compounds. Visualization of radioisotopes on chip is critical for synthesis optimization and technological development. With Cerenkov imaging, beta particle emitting isotopes can be localized with a sensitive CCD camera. In order for Cerenkov imaging to also serve as a quantitative tool, it is necessary to understand how material properties relevant to Cerenkov emission, namely, index of refraction and beta particle stopping power, affect Cerenkov light output. In this report, we investigate the fundamental physical characteristics of Cerenkov photon yield at different stages of [(18)F]FDG synthesis on the electrowetting on dielectric (EWOD) microfluidic platform. We also demonstrate how Cerenkov imaging has enabled synthesis optimization. Geant4, a Monte Carlo program applied extensively in high energy physics, is used to simulate Cerenkov photon yield from (18)F beta particles traversing materials of interest during [(18)F]FDG synthesis on chip. Our simulations show that the majority (approximately two-thirds) of the (18)F beta particle energy available to produce Cerenkov photons is deposited on the glass plates of the EWOD chip. This result suggests the possibility of using a single calibration factor to convert Cerenkov signal to radioactivity, independent of droplet composition. We validate our simulations with a controlled measurement examining varying ratios of [(18)O]H2O, dimethyl sulfoxide (DMSO), and acetonitrile (MeCN), and find a consistent calibration independent of solvent composition. However, the calibration factor may underestimate the radioactivity in actual synthesis due to discoloration of the droplet during certain steps of probe synthesis. In addition to the attractive quantitative potential of Cerenkov imaging, this imaging strategy provides indispensable qualitative data to guide synthesis optimization. We are able to use this imaging technique to optimize the mixing protocol as well as identify and correct for loss of radioactivity due to the migration of radioactive vapor outside of the EWOD heater, enabling an overall increase in the crude radiochemical yield from 50 ± 3% (n = 3) to 72 ± 13% (n = 5).

Thermal Stability and Orthogonal Functionalization of Organophosphonate Self-Assembled Monolayers as Potential Liners for Cu Interconnect.

In this study, we investigated the thermal stabilities of butylphosphonic acid (BPA) and aminopropyltriethoxysilane (APTES) self-assembled monolayers (SAM) on a Si substrate. The thermal desorption and the thermal cleavage of the BPA and APTES SAM film on the Si substrate were studied by X-ray photoelectron spectroscopy (XPS) upon thermal treatment from 50 to 550 °C. XPS analyses show that the onset of the thermal desorption of the APTES monolayer occurs at 250 °C and the APTES SAM completely decomposed at 400 °C. Conversely, BPA SAM on Si shows that the onset of thermal desorption occurs at 350 °C, and the BPA SAM completely desorbed at approximately 500 °C. Our study revealed that the organophosphonate SAM is a more stable SAM in modifying the dielectric sidewalls of a Cu interconnect when compared to organosilane SAM. To overcome the spontaneous reaction of the organophosphonate film on the metal substrate, a simple orthogonal functionalization method using thiolate SAM as a sacrificial layer was also demonstrated in this study.

In vivo investigation of boron-rich nanodrugs for treating triple-negative breast cancers via boron neutron capture therapy.

Triple-negative breast cancer (TNBC) is characterized by highly proliferative cancer cells and is the only subtype of breast cancer that lacks a targeted therapy. Boron neutron capture therapy (BNCT) is an approach that combines chemotherapy with radiotherapy and can potentially offer beneficial targeted treatment for TNBC patients owing to its unique ability to eradicate cancer cells selectively while minimizing damage to the surrounding healthy cells. Since BNCT relies on specific delivery of a high loading of B10 to the tumor site, there is growing research interest to develop more potent boron-based drugs for BNCT that can overcome the limitations of small-molecule boron compounds. In this study, polyethylene-glycol-coated boron carbon oxynitride nanoparticles (PEG@BCNO) of size 134.2±23.6nm were prepared as a promising drug for BNCT owing to their high boron content and enhanced biocompatibility. The therapeutic efficiency of PEG@BCNO was compared with a state-of-the-art 10BPA boron drug in mice bearing MDA-MB-231 tumor. In the orthotopic mouse model, PEG@BCNO showed higher B10 accumulation in the tumor tissues (6 µg 10B/g tissue compared to 3 µg 10B/g tissue in mice administered B10-enriched 10BPA drug) despite using the naturally occurring 11B/10B boron precursor in the preparation of the BCNO nanoparticles. The in vivo biodistribution of PEG@BCNO in mice bearing MDA-MB-231 showed a tumor/blood ratio of ~3.5, which is comparable to that of the state-of-the-art 10BPA-fructose drug. We further demonstrated that upon neutron irradiation, the mice bearing MDA-MB-231 tumor cells treated with PEG@BCNO and 10BPA showed tumor growth delay times of 9 days and 1 day, respectively, compared to mice in the control group after BNCT. The doubling times (DTs) for mice treated with PEG@BCNO and 10BPA as well as mice in the control group were calculated to be 31.5, 19.8, and 17.7 days, respectively. Immunohistochemical staining for the p53 and caspase-3 antibodies revealed that mice treated with PEG@BCNO showed lower probability of cancer recurrence and greater level of cellular apoptosis than mice treated with 10BPA and mice in the control group. Our study thus demonstrates the potential of pegylated BCNO nanoparticles in effectively inhibiting the growth of TNBC tumors compared to the state-of-the-art boron drug 10BPA.

Unleashing the Power of 2D MoS2: In Situ TEM Study of Its Potential as Diffusion Barriers in Ru Interconnects.

This study presents the utilization of MoS2 as a diffusion barrier for metal interconnects, in situ transmission electron microscopy (TEM) observations are employed for comprehensive understanding. The diffusion-blocking ability of MoS2 is discussed by the diffusion and phase transformation between Ru and Si via TEM diffraction and imaging. When the sample is heated to a high temperature such that MoS2 loses the ability to block the diffusion, Si diffuses through the MoS2 into the Ru layer, leading to the formation of Ru2Si3. Both multilayer and monolayer (1L) MoS2 exhibit exceptional diffusion-blocking ability up to 800 °C. Furthermore, plasma-treated 1L-MoS2 shows a slightly low diffusion-blocking temperature of 750 °C, while the dangling bonds in MoS2 improve the interfacial adhesion. These findings suggest that MoS2 holds great potential as a diffusion barrier for metal interconnects.

On chip droplet characterization: a practical, high-sensitivity measurement of droplet impedance in digital microfluidics.

We demonstrate a new approach to impedance measurement on digital microfluidics chips for the purpose of simple, sensitive, and accurate volume and liquid composition measurement. Adding only a single series resistor to existing AC droplet actuation circuits, the platform is simple to implement and has negligible effect on actuation voltage. To accurately measure the complex voltage across the resistor (and hence current through the device and droplet), the designed system is based on software-implemented lock-in amplification detection of the voltage drop across the resistor which filters out noise, enabling high-resolution and low-limit signal recovery. We observe picoliter sensitivity with linear correlation of voltage to volume extending to the microliter volumes that can be handled by digital microfluidic devices. Due to the minimal hardware, the system is robust and measurements are highly repeatable. The detection technique provides both phase and magnitude information of the real-time current flowing through the droplet for a full impedance measurement. The sensitivity and resolution of this platform enables it to distinguish between various liquids which, as demonstrated in this paper, could potentially be extended to quantify solute concentrations, liquid mixtures, and presence of analytes.

Facile Synthesis of Carbon- and Nitrogen-Doped Iron Borate as a Highly Efficient Single-Component Heterogeneous Photo-Fenton Catalyst under Simulated Solar Irradiation.

The development of a heterogeneous catalyst for use in environmental remediation remains a challenging and attractive research endeavor. Specifically, for Fenton reactions, most research approaches have focused on the preparation of iron-containing heterostructures as photo-Fenton catalysts that utilize visible light for enhancing the degradation efficiency. Herein, the synthesis and novel application of C,N-doped iron borates are demonstrated as single-component heterogeneous photo-Fenton catalysts with high Fenton activity under visible light. Under the optimal conditions, 10 mg of the catalyst is shown to achieve effective degradation of 10 ppm methylene blue (MB) dye, Rhodamine B (RhB) dye, and tetracycline (TC) under simulated solar irradiation with a first-order rate constant of k = 0.218 min-1, 0.177 min-1, and 0.116 min-1, respectively. Using MB as a model system, the C,N-doped iron borate exhibits 10- and 26-fold increases in catalytic activity relative to that of the 50 nm hematite nanoparticles and that of the non-doped iron borate, respectively, in the presence of H2O2 under the simulated solar irradiation. Furthermore, the optimum reaction conditions used only 320 equivalents of H2O2 with respect to the concentration of dye, rather than the several thousand equivalents of H2O2 used in conventional heterogeneous Fenton catalysts. In addition, the as-prepared C,N-doped iron borate achieves 75% MB degradation after 20 min in the dark, thus enabling the continuous degradation of pollutants at night and in areas with poor light exposure. The stability and recyclability of C,N-doped iron borate for the oxidation of MB was demonstrated over three cycles with insignificant loss in photo-Fenton activity. The high Fenton activity of the C,N-doped iron borate is considered to be due to the synergistic action between the negatively-charged borate ligands and the metal center in promoting the Fenton reaction. Moreover, carbon and nitrogen doping are shown to be critical in modifying the electronic structure and increasing the conductivity of the catalyst. In view of its synthetic simplicity, high efficiency, low cost of reagents, and minimal cost of operation (driven by natural sunlight), the as-prepared heterogeneous single-component metal borate catalyst has potential application in the industrial treatment of wastewater.

Boron Carbon Oxynitride as a Novel Metal-Free Photocatalyst.

Boron-based nanomaterials are emerging as non-toxic, earth-abundant (photo)electrocatalyst materials in solar energy conversion for the production of solar hydrogen fuel and environmental remediation. Boron carbon oxynitride (BCNO) is a quaternary semiconductor with electronic, optical, and physicochemical properties that can be tuned by varying the composition of boron, nitrogen, carbon, and oxygen. However, the relationship between BCNO's structure and -photocatalytic activity relationship has yet to be explored. We performed an in-depth spectroscopic analysis to elucidate the effect of using two different nitrogen precursors and the effect of annealing temperatures in the preparation of BCNO. BCNO nanodisks (D = 6.7 ± 1.1 nm) with turbostratic boron nitride diffraction patterns were prepared using guanidine hydrochloride as the nitrogen source precursor upon thermal annealing at 800°C. The X-ray photoelectron spectroscopy (XPS) surface elemental analysis of the BCNO nanodisks revealed the B, C, N, and O compositions to be 40.6%, 7.95%, 37.7%, and 13.8%, respectively. According to the solid-state 11B NMR analyses, the guanidine hydrochloride-derived BCNO nanodisks showed the formation of various tricoordinate BNx(OH)3-x species, which also served as one of the photocatalytic active sites. The XRD and in-depth spectroscopic analyses corroborated the preparation of BCNO-doped hexagonal boron nitride nanodisks. In contrast, the BCNO annealed at 600 °C using melamine as the nitrogen precursor consisted of layered nanosheets composed of B, C, N, and O atoms covalently bonded in a honeycomb lattice as evidence by the XRD, XPS, and solid-state NMR analysis (11B and 13C) analyses. The XPS surface elemental composition of the melamine-derived BCNO layered structures consisted of a high carbon composition (75.1%) with a relatively low boron (5.24%) and nitrogen (7.27%) composition, which indicated the formation of BCNO-doped graphene oxides layered sheet structures. This series of melamine-derived BCNO-doped graphene oxide layered structures were found to exhibit the highest photocatalytic activity, exceeding the photocatalytic activity of graphitic carbon nitride. In this layered structure, the formation of the tetracoordinate BNx(OH)3-x(CO) species and the rich graphitic domains were proposed to play an important role in the photocatalytic activity of the BCNO-doped graphene oxides layered structures. The optical band gap energies were measured to be 5.7 eV and 4.2 eV for BCNO-doped hexagonal boron nitride nanodisks and BCNO-doped graphene oxides layered structures, respectively. Finally, BCNO exhibited an ultralong photoluminescence with an average decay lifetime of 1.58, 2.10, 5.18, and 8.14 µs for BGH01, BGH03, BMH01, BMH03, respectively. This study provides a novel metal-free photocatalytic system and provides the first structural analysis regarding the origin of BCNO-based photocatalyst.

Polymer-Coated Nanoparticles for Therapeutic and Diagnostic Non-10B Enriched Polymer-Coated Boron Carbon Oxynitride (BCNO) Nanoparticles as Potent BNCT Drug.

Boron neutron capture therapy (BNCT) is a powerful and selective anti-cancer therapy utilizing 10B-enriched boron drugs. However, clinical advancement of BCNT is hampered by the insufficient loading of B-10 drugs throughout the solid tumor. Furthermore, the preparation of boron drugs for BNCT relies on the use of the costly B-10 enriched precursor. To overcome these challenges, polymer-coated boron carbon oxynitride (BCNO) nanoparticles, with ~30% of boron, were developed with enhanced biocompatibility, cell uptake, and tumoricidal effect via BNCT. Using the ALTS1C1 cancer cell line, the IC50 of the PEG@BCNO, bare, PEI@BCNO were determined to be 0.3 mg/mL, 0.1 mg/mL, and 0.05 mg/mL, respectively. As a proof-of-concept, the engineered non-10B enriched polymer-coated BCNO exhibited excellent anti-tumor effect via BNCT due to their high boron content per nanoparticle and due to the enhanced cellular internalization and retention compared to small molecular 10B-BPA drug. The astrocytoma ALTS1C1 cells treated with bare, polyethyleneimine-, and polyethylene glycol-coated BCNO exhibited an acute cell death of 24, 37, and 43%, respectively, upon 30 min of neutron irradiation compared to the negligible cell death in PBS-treated and non-irradiated cells. The radical approach proposed in this study addresses the expensive and complex issues of B-10 isotope enrichment process; thus, enabling the preparation of boron drugs at a significantly lower cost, which will facilitate the development of boron drugs for BNCT.

Pharmacy Students' Perceptions of Reflective Portfolios and their Effect on Students' Deep Information-Processing Skills.

Objective. To evaluate pharmacy students' perceptions of the educational value of reflective portfolio and to gain an understanding of the factors that might influence these perceptions. Methods. Bachelor of Pharmacy (BPharm) students' perceptions of using reflective portfolios were evaluated by administering the same questionnaire at the beginning of years 2, 3 and 4 of the curriculum. Statistical analysis was carried out to determine the differences among the perception scores of different academic years. Semi-structured interviews were completed with fourth-year students to further explore their experiences with the reflective portfolio. Students' deep information processing (DIP) skills were compared with those of students from another pharmacy cohort whose curriculum did not include a reflective portfolio. Results. The students' perceptions of the reflective portfolio improved significantly as they progressed from year 2 to year 4 of the curriculum. The factors that contributed to a positive experience were a clear understanding of objectives and guidelines for the reflective portfolio, useful mentor feedback, a positive learning attitude and motivation, and having a user-friendly technology platform for submission of the portfolio. The students' DIP skills after completing the reflective portfolio were higher than those of students who did not have a reflective portfolio assignment in their curriculum. Conclusion. Pharmacy students' appreciation of the educational value of a reflective portfolio increased as they progressed to their final year, and their DIP skills improved. These findings support the use of a reflective portfolio as a learning tool for BPharm students' personal and professional development.

Molecular Dynamics and Physical Stability of Pharmaceutical Co-amorphous Systems: Correlation Between Structural Relaxation Times Measured by Kohlrausch-Williams-Watts With the Width of the Glass Transition Temperature (ΔTg) and the Onset of Crystallization.

The study aims to characterize the structural relaxation times of quench-cooled co-amorphous systems using Kohlrausch-Williams-Watts (KWW) and to correlate the relaxation data with the onset of crystallization. Comparison was also made between the relaxation times obtained by KWW and the width of glass transition temperature (ΔTg) methods (simple and quick). Differential scanning calorimetry, Fourier-transformed infrared spectroscopy, and polarized light microscopy were used to characterize the systems. Results showed that co-amorphous systems yielded a single Tg and ΔCp, suggesting the binary mixtures exist as a single amorphous phase. A narrow step change at Tg indicates the systems were fragile glasses. In co-amorphous nap-indo and para-indo, experimental Tgs were in good agreement with the predicted Tg. However, the Tg of co-amorphous nap-cim and indo-cim were 20°C higher than the predicted Tg, possibly due to stronger molecular interactions. Structural relaxation times below the experimental Tg were successfully characterized using the KWW and ΔTg methods. The comparison plot showed that KWW data are directly proportional to the ½ power of ΔTg data, after adjusting for a small offset. A moderate positive correlation was observed between the onset of crystallization and the KWW data. Structural relaxation times may be useful predictor of physical stability of co-amorphous systems.

On-demand radiosynthesis of N-succinimidyl-4-[18F]fluorobenzoate ([18F]SFB) on an electrowetting-on-dielectric microfluidic chip for 18F-labeling of protein.

An all-electronic, droplet-based batch microfluidic device, operated using the electrowetting on dielectric (EWOD) mechanism was developed for on-demand synthesis of N-succinimidyl-4-[18F]fluorobenzoate ([18F]SFB), the most commonly used 18F-prosthetic group for biomolecule labeling. In order to facilitate the development of peptides, and proteins as new diagnostic and therapeutic agents, we have diversified the compact EWOD microfluidic platform to perform the three-step radiosynthesis of [18F]SFB starting from the no carrier added [18F]fluoride ion. In this report, we established an optimal microliter droplet reaction condition to obtain reliable yields and synthesized [18F]SFB with sufficient radioactivity for subsequent conjugation to the anti-PSCA cys-diabody (A2cDb) and for small animal imaging. The three-step, one-pot radiosynthesis of [18F]SFB radiochemistry was adapted to a batch microfluidic platform with a reaction droplet sandwiched between two parallel plates of an EWOD chip, and optimized. Specifically, the ratio of precursor to base, droplet volume, reagent concentration, reaction time, and evaporation time were found be to be critical parameters. [18F]SFB was successfully synthesized on the EWOD chip in 39 ± 7% (n = 4) radiochemical yield in a total synthesis time of ∼120 min ([18F]fluoride activation, [18F]fluorination, hydrolysis, and coupling reaction, HPLC purification, drying and reformulation). The reformulation and stabilization step for [18F]SFB was important to obtain a high protein labeling efficiency of 33.1 ± 12.5% (n = 3). A small-animal immunoPET pilot study demonstrated that the [18F]SFB-PSCA diabody conjugate showed specific uptake in the PSCA-positive human prostate cancer xenograft. The successful development of a compact footprint of the EWOD radiosynthesizer has the potential to empower biologists to produce PET probes of interest themselves in a standard laboratory.

Performing radiosynthesis in microvolumes to maximize molar activity of tracers for positron emission tomography.

Positron emission tomography (PET) is a molecular diagnostic imaging technology to quantitatively visualize biological processes in vivo. For many applications, including imaging of low tissue density targets (e.g. neuroreceptors), imaging in small animals, and evaluation of novel tracers, the injected PET tracer must be produced with high molar activity to ensure low occupancy of biological targets and avoid pharmacologic effects. Additionally, high molar activity is essential for tracers with lengthy syntheses or tracers transported to distant imaging sites. We show that radiosynthesis of PET tracers in microliter volumes instead of conventional milliliter volumes results in substantially increased molar activity, and we identify the most relevant variables affecting this parameter. Furthermore, using the PET tracer [18F]fallypride, we illustrate that molar activity can have a significant impact on biodistribution. With full automation, microdroplet platforms could provide a means for radiochemists to routinely, conveniently, and safely produce PET tracers with high molar activity.