Functional Nanostructures from Sol-Gel Synthesis Using Keggin Polyoxometallate Phosphotungstic Acid as a Precursor.

Subjecting phosphotungstic acid solutions to low pH in combination with introduction of polyvalent cations led to the formation of nanostructured microspheres of approximately 2 µm in size, as shown by scanning electron microscopy, which were almost insoluble and resistant to degradation at neutral and high pH. These microspheres were composed of secondary nanospheres with diameters around 20 nm as revealed by transmission electron microscopy and atomic force microscopy. Investigations of the crystal structure of a potential intermediate of this process, namely, acidic lanthanum phosphotungstate, [La(H2O)9](H3O)3[PW12O40]2(H2O)19, showed a tight network of hydrogen bonding, permitting closer packing of phosphotungstic acid anions, thereby confirming the mechanism of the observed self-assembly process. The new material demonstrated promising electrochemical properties in oxygen evolution reactions with the high stability of the obtained electrode material.

Molecular Mechanisms in Metal Oxide Nanoparticle-Tryptophan Interactions.

One of the crucial metabolic processes for both plant and animal kingdoms is the oxidation of the amino acid tryptophan (TRP) that regulates plant growth and controls hunger and sleeping patterns in animals. Here, we report revolutionary insights into how this process can be crucially affected by interactions with metal oxide nanoparticles (NPs), creating a toolbox for a plethora of important biomedical and agricultural applications. Molecular mechanisms in TRP-NP interactions were revealed by NMR and optical spectroscopy for ceria and titania and by X-ray single-crystal study and a computational study of model TRP-polyoxometalate complexes, which permitted the visualization of the oxidation mechanism at an atomic level. Nanozyme activity, involving concerted proton and electron transfer to the NP surface for oxides with a high oxidative potential, like CeO2 or WO3, converted TRP in the first step into a tricyclic organic acid belonging to the family of natural plant hormones, auxins. TiO2, a much poorer oxidant, was strongly binding TRP without concurrent oxidation in the dark but oxidized it nonspecifically via the release of reactive oxygen species (ROS) in daylight.

Synthesis, Structure, and Thermal Properties of Volatile Group 11 Triazenides as Potential Precursors for Vapor Deposition.

Group 11 thin films are desirable as interconnects in microelectronics. Although many M-N-bonded Cu precursors have been explored for vapor deposition, there is currently a lack of suitable Ag and Au derivatives. Herein, we present monovalent Cu, Ag, and Au 1,3-di-tert-butyltriazenides that have potential for use in vapor deposition. Their thermal stability and volatility rival that of current state-of-the-art group 11 precursors with bidentate M-N-bonded ligands. Solution-state thermolysis of these triazenides yielded polycrystalline films of elemental Cu, Ag, and Au. The compounds are therefore highly promising as single-source precursors for vapor deposition of coinage metal films.

Bismuth(III) Forms Exceptionally Strong Complexes with Natural Organic Matter.

The use of bismuth in the society has steadily increased during the last decades, both as a substitute for lead in hunting ammunition and various metallurgical applications, as well as in a range of consumer products. At the same time, the environmental behavior of bismuth is largely unknown. Here, the binding of bismuth(III) to organic soil material was investigated using extended X-ray absorption spectroscopy (EXAFS) and batch experiments. Moreover, the capacity of suwannee river fulvic acid (SRFA) to enhance the solubility of metallic bismuth was studied in a long-term (2 years) equilibration experiment. Bismuth(III) formed exceptionally strong complexes with the organic soil material, where >99% of the added bismuth(III) was bound by the solid phase, even at pH 1.2. EXAFS data suggest that bismuth(III) was bound to soil organic matter as a dimeric Bi3+ complex where one carboxylate bridges two Bi3+ ions, resulting in a unique structural stability. The strong binding to natural organic matter was verified for SRFA, dissolving 16.5 mmol Bi per gram carbon, which largely exceeds the carboxylic acid group density of this compound. Our study shows that bismuth(III) will most likely be associated with natural organic matter in soils, sediments, and waters.

Modulating Surface Properties of the Linothele fallax Spider Web by Solvent Treatment.

Linothele fallax (Mello-Leitão) (L. fallax) spider web, a potentially attractive tissue engineering material, was investigated using quantitative peak force measurement atomic force microscopy and scanning electron microscopy with energy dispersive spectroscopy both in its natural state and after treatment with solvents of different protein affinities, namely, water, ethanol, and dimethyl sulfoxide (DMSO). Native L. fallax silk threads are densely covered by globular objects, which constitute their inseparable parts. Depending on the solvent, treating L. fallax modifies its appearance. In the case of water and ethanol, the changes are minor. In contrast, DMSO practically removes the globules and fuses the threads into dense bands. Moreover, the solvent treatment influences the chemistry of the threads' surface, changing their adhesive and, therefore, biocompatibility and cell adhesion properties. On the other hand, the solvent-treated web materials' contact effect on different types of biological matter differs considerably. Protein-rich matter controls humidity better when wrapped in spider silk treated with more hydrophobic solvents. However, carbohydrate plant materials retain more moisture when wrapped in native spider silk. The extracts produced with the solvents were analyzed using nuclear magnetic resonance (NMR) and liquid chromatography-mass spectrometry techniques, revealing unsaturated fatty acids as representative adsorbed species, which may explain the mild antibacterial effect of the spider silk. The extracted metabolites were similar for the different solvents, meaning that the globules were not "dissolved" but "fused into" the threads themselves, being supposedly rolled-in knots of the protein chain.

Synthesis, Characterization, and Thermal Study of Divalent Germanium, Tin, and Lead Triazenides as Potential Vapor Deposition Precursors.

Only a few M-N bonded divalent group 14 precursors are available for vapor deposition, in particular for Ge and Pb. A majority of the reported precursors are dicoordinated with the Sn(II) amidinates, the only tetracoordinated examples. No Ge(II) and Pb(II) amidinates suitable for vapor deposition have been demonstrated. Herein, we present tetracoordinated Ge(II), Sn(II), and Pb(II) complexes bearing two sets of chelating 1,3-di-tert-butyltriazenide ligands. These compounds are thermally stable, sublime quantitatively between 60 and 75 °C (at 0.5 mbar), and show ideal single-step volatilization by thermogravimetric analysis.

Rare-Earth-Modified Titania Nanoparticles: Molecular Insight into Synthesis and Photochemical Properties.

A molecular precursor approach to titania (anatase) nanopowders modified with different amounts of rare-earth elements (REEs: Eu, Sm, and Y) was developed using the interaction of REE nitrates with titanium alkoxides by a two-step solvothermal-combustion method. The nature of an emerging intermetallic intermediate was revealed unexpectedly for the applied conditions via a single-crystal study of the isolated bimetallic isopropoxide nitrate complex [Ti2Y(iPrO)9(NO3)2], a nonoxo-substituted compound. Powders of the final reaction products were characterized by powder X-ray diffraction, scanning electron microscopy-energy-dispersive spectroscopy, Fourier transform infrared, X-ray photoelectron spectroscopy, Raman spectroscopy, and photoluminescence (PL). The addition of REEs stabilized the anatase phase up to ca. 700 °C before phase transformation into rutile became evident. The photocatalytic activity of titania modified with Eu3+ and Sm3+ was compared with that of Degussa P25 titania as the control. PL studies indicated the incorporation of Eu and Sm cations into titania (anatase) at lower annealing temperatures (500 °C), but an exclusion to the surface occurred when the annealing temperature was increased to 700 °C. The efficiency of the modified titania was inferior to the control titania while illuminated within narrow wavelength intervals (445-465 and 510-530 nm), but when subjected to a wide range of visible radiation, the Eu3+- and Sm3+-modified titania outperformed the control, which was attributed both to doping of the band structure of TiO2 with additional energy levels and to the surface chemistry of the REE-modified titania.

Single-Source Alkoxide Precursor Approach to Titanium Molybdate, TiMoO5, and Its Structure, Electrochemical Properties, and Potential as an Anode Material for Alkali Metal Ion Batteries.

Transition-metal oxide nanostructured materials are potentially attractive alternatives as anodes for Li ion batteries and as photocatalysts. Combining the structural and thermal stability of titanium oxides with the relatively high oxidation potential and charge capacity of molybdenum(VI) oxides was the motivation for a search for approaches to mixed oxides of these two metals. Challenges in traditional synthetic methods for such materials made development of a soft chemistry single-source precursor pathway our priority. A series of bimetallic Ti-Mo alkoxides were produced by reactions of homometallic species in a 1:1 ratio. Thermal solution reduction with subsequent reoxidation by dry air offered in minor yields Ti2Mo2O4(OMe)6(OiPr)6 (1) by the interaction of Ti(OiPr)4 with MoO(OMe)4 and Ti6Mo6O22(OiPr)16(iPrOH)2 (2) by the reaction of Ti(OiPr)4 with MoO(OiPr)4. An attempt to improve the yield of 2 by microhydrolysis, using the addition of stoichiometric amounts of water, resulted in the formation with high yield of a different complex, Mo7Ti7+xO31+x(OiPr)8+2x (3). Controlled thermal decomposition of 1-3 in air resulted in their transformation into the phase TiMoO5 (4) with an orthorhombic structure in space group Pnma, as determined by a Rietveld refinement. The electrochemical characteristics of 4 and its chemical transformation on Li insertion were investigated, showing its potential as a promising anode material for Li ion batteries for the first time. A lower charge capacity and lower stability were observed for its application as an anode for a Na ion battery.

Synthesis and Thermal Study of Hexacoordinated Aluminum(III) Triazenides for Use in Atomic Layer Deposition.

Amidinate and guanidinate ligands have been used extensively to produce volatile and thermally stable precursors for atomic layer deposition. The triazenide ligand is relatively unexplored as an alternative ligand system. Herein, we present six new Al(III) complexes bearing three sets of a 1,3-dialkyltriazenide ligand. These complexes volatilize quantitatively in a single step with onset volatilization temperatures of ∼150 °C and 1 Torr vapor pressures of ∼134 °C. Differential scanning calorimetry revealed that these Al(III) complexes exhibited exothermic events that overlapped with the temperatures of their mass loss events in thermogravimetric analysis. Using quantum chemical density functional theory computations, we found a decomposition pathway that transforms the relatively large hexacoordinated Al(III) precursor into a smaller dicoordinated complex. The pathway relies on previously unexplored interligand proton migrations. These new Al(III) triazenides provide a series of alternative precursors with unique thermal properties that could be highly advantageous for vapor deposition processes of Al containing materials.

Chemical and Biochemical Approaches for the Synthesis of Substituted Dihydroxybutanones and Di- and Tri-Hydroxypentanones.

Polyhydroxylated compounds are building blocks for the synthesis of carbohydrates and other natural products. Their synthesis is mainly achieved by different synthetic versions of aldol-coupling reactions, catalyzed either by organocatalysts, enzymes, or metal-organic catalysts. We have investigated the formation of 1,4-substituted 2,3-dihydroxybutan-1-one derivatives from para- and meta-substituted phenylacetaldehydes by three distinctly different strategies. The first involved a direct aldol reaction with hydroxyacetone, dihydroxyacetone, or 2-hydroxyacetophenone, catalyzed by the cinchona derivative cinchonine. The second was reductive cross-coupling with methyl- or phenylglyoxal promoted by SmI2, resulting in either 5-substituted 3,4-dihydroxypentan-2-ones or 1,4 bis-phenyl-substituted butanones, respectively. Finally, in the third case, aldolase catalysis was employed for synthesis of the corresponding 1,3,4-trihydroxylated pentan-2-one derivatives. The organocatalytic route with cinchonine generated distereomerically enriched syn-products (de = 60-99%), with moderate enantiomeric excesses (ee = 43-56%) but did not produce aldols with either hydroxyacetone or dihydroxyacetone as donor ketones. The SmI2-promoted reductive cross-coupling generated product mixtures with diastereomeric and enantiomeric ratios close to unity. This route allowed for the production of both 1-methyl- and 1-phenyl-substituted 2,3-dihydroxybutanones at yields between 40-60%. Finally, the biocatalytic approach resulted in enantiopure syn-(3 R,4 S) 1,3,4-trihydroxypentan-2-ones.

Contact (kallikrein/kinin) system activation in whole human blood induced by low concentrations of α-Fe2O3 nanoparticles.

Iron-oxide nanoparticles (NPs) generated by environmental events are likely to represent health problems. α-Fe2O3 NPs were synthesized, characterized and tested in a model for toxicity utilizing human whole blood without added anticoagulant. MALDI-TOF of the corona was performed and activation markers for plasma cascade systems (complement, contact and coagulation systems), platelet consumption and release of growth factors, MPO, and chemokine/cytokines from blood cells were analyzed. The coronas formed on the pristine α-Fe2O3 NPs contained contact system proteins and they induced massive activation of the contact (kinin/kallikrein) system, as well as thrombin generation, platelet activation, and release of two pro-angiogeneic growth factors: platelet-derived growth factor and vascular endothelial growth factor, whereas complement activation was unaffected. The α-Fe2O3 NPs exhibited a noticeable toxicity, with kinin/kallikrein activation, which may be associated with hypotension and long-term angiogenesis in vivo, with implications for cancer, arteriosclerosis and pulmonary disease.

Toward Molecular Recognition of REEs: Comparative Analysis of Hybrid Nanoadsorbents with the Different Complexonate Ligands EDTA, DTPA, and TTHA.

Highly efficient tailored SiO2-based nanoadsorbents were synthesized for the selective extraction of rare-earth elements (REEs). Three different complexonates (EDTA, DTPA, and TTHA) were investigated in terms of uptake capacity and selectivity, showing capacities of up to 300 mg of RE3+/g and distinct preferential trends depending on the complexonate. EDTA-functionalized nanoadsorbents showed higher uptake for Dy3+, DTPA-functionalized ones for Nd3+, and TTHA-functionalized ones for La3+. The selectivity was even more pronounced in desorption at pH 3, with separation factors of up to 76 in ternary mixtures. A broad comparative study of single-crystal structures of the complexes between REE and the nongrafted complexonates at different pHs led to a molecular understanding of their individual modes of action. EDTA-derived nanoadsorbents combine concerted action and chelation, whereas the latter is the preferential coordination mechanism for DTPA- and TTHA-derived nanoadsorbents. These different mechanisms result in quite specific REE affinities, which opens great possibilities toward molecular recognition of REEs and for tailoring nanoadsorbents for a particular REE or group of REEs in their production from minerals and in recycling. It also brings new insights into how REEs are adsorbed on nanomaterials applied in a broad variety of fields, including bioimaging and MRI.

Cytoprotective Encapsulation of Individual Jurkat T Cells within Durable TiO2 Shells for T-Cell Therapy.

Lymphocytes, such as T cells and natural killer (NK) cells, have therapeutic promise in adoptive cell transfer (ACT) therapy, where the cells are activated and expanded in vitro and then infused into a patient. However, the in vitro preservation of labile lymphocytes during transfer, manipulation, and storage has been one of the bottlenecks in the development and commercialization of therapeutic lymphocytes. Herein, we suggest a cell-in-shell (or artificial spore) strategy to enhance the cell viability in the practical settings, while maintaining biological activities for therapeutic efficacy. A durable titanium oxide (TiO2 ) shell is formed on individual Jurkat T cells, and the CD3 and other antigens on cell surfaces remain accessible to the antibodies. Interleukin-2 (IL-2) secretion is also not hampered by the shell formation. This work suggests a chemical toolbox for effectively preserving lymphocytes in vitro and developing the lymphocyte-based cancer immunotherapy.

Comparing human respiratory adverse effects after acute exposure to particulate matter in conventional and particle-reduced swine building environments.

OBJECTIVES: To evaluate innate immunity responses, lung function and symptoms in volunteers acutely exposed to organic dust in swine buildings after installing particle separators aimed to reduce particulate matter exposure. METHODS: 11 healthy participants were exposed in 2 different facilities, with and without installed particle separators, in a cross-over design including 2-3 weeks wash-out between the 2 exposures. Size, distribution and composition of particulate matter and endotoxins in the air were measured. Lung function (spirometry), bronchial responsiveness, symptoms questionnaire and markers of innate immunity in blood and nasal lavage were measured before and after the 3-hour exposures. RESULTS: The number of particles, in particular fine particles sized 0.3-0.5 µm, was reduced in the particle-separated swine building environment (PSE) compared with that in the conventional building (CE). In the PSE, headache (p=0.03) and increased body temperature (p=0.016) were less pronounced than in the CE. The expression of toll-like receptors (TLR)2 and TLR4 on blood monocytes significantly increased (p=0.016 and 0.017, respectively) while cluster of differentiation (CD)14 on neutrophils decreased (p=0.05) after exposure in the CE, yet with no difference between the 2 exposures. Compared with the conventional environment, exposure to the PSE yielded lower interleukin (IL)-6 (p=0.02) and IL-8 (p=0.04) levels in the upper respiratory tract, as assessed by nasal lavage. CONCLUSIONS: Particulate matter and organic dust in the swine building were reduced after installing particle separators, which, in naïve never exposed volunteers, in turn reduced adverse health effects caused by acute exposure in swine buildings compared with exposure to the conventional swine building environment.

Palladium Nanoparticles: Is There a Risk for Aquatic Ecosystems?

Nano-sized palladium (nano-Pd) is used in catalytic converters of automobiles, where it can be released into the environment by abrasion. Although these particles may subsequently be transported into surface water bodies, no data estimating their fate and toxicity in aquatic systems exists. This study characterized the particle size development of nano-Pd (advertised size ~12 nm; hydrodynamic size ~70 nm) in media with variable ionic strength (IS). Additionally, the particles' acute toxicity for daphnids and chironomids was assessed. While nano-Pd agglomerated more quickly with increasing IS, it caused only marginal effects in both test species after 96 h of exposure. After 144 h of exposure, however, an EC50 value of 1.23 mg nano-Pd/L for daphnids was determined indicating effects over the long run. When considering the relatively low environmental concentration of elemental Pd in surface waters (usually ng/L), though, this study suggests only a low aquatic risk in response to nano-Pd.

General facile approach to transition-metal oxides with highly uniform mesoporosity and their application as adsorbents for heavy-metal-ion sequestration.

Mesoporous powders of transition-metal oxides, TiO2, ZrO2, HfO2, Nb2O5, and Ta2O5, pure from organic impurities were produced by a rapid single-step thermohydrolytic approach. The obtained materials display an impressively large active surface area and sharp pore-size distribution, being composed of partially coalesced uniform nanoparticles with crystalline cores and amorphous shells. They reveal extremely high adsorption capacity in removal of Cr(VI) anions from solutions (25.8 for TiO2, 73.0 for ZrO2, and 74.7 mg g(-1) for Nb2O5 in relation to the Cr2O7(2-) anion), making them very attractive as adsorbents in water remediation applications. The difference in adsorption capacities for the studied oxides may be explained by variation in surface hydration and surface-charge distribution.

Lanthanum molybdate nanoparticles from the Bradley reaction: factors influencing their composition, structure, and functional characteristics as potential matrixes for luminescent phosphors.

Interaction of lanthanum isopropoxide with molybdenum(VI) alkoxides in La/Mo ratios varying from 3:1 to 1:1 in acetophenon or allyl alcohol as solvents offers nanosized poorly crystalline products of complex composition, where the precipitation of Mo-rich ones is followed by the formation of La-rich ones with conservation of the reaction stoichiometry in total. Thermal treatment of the precipitates at temperatures over 700 °C leads to the formation of stoichiometric phases of the α- and ß-La2Mo2O9 compositions. Introduction of smaller Re(3+) cations such as Sm(3+) by doping favors stabilization of the La2-xRExMo2O9 phase with improved crystallinity even after lower-temperature thermal treatment. The doping is successful only when the Re(3+) (Sm(3+), Eu(3+), and Tb(3+)) is introduced as an alkoxide: application of Re(3+)(acac)3 as Re(3+) sources leads to materials free from Re(3+). The produced samples were characterized by XPD, TGA, SEM, and TEM studies as well as the luminescent properties for the Sm(3+)-doped phases.

Biphasic water-oil systems for functional augmentation of probiotic Lactobacillus acidophilus nanoencapsulated in luteolin-Fe3+ shells.

Single-cell nanoencapsulation (SCNE) has great potential in the enhancement of therapeutic effects of probiotic microbes. However, the material scope has been limited to water-soluble compounds to avoid non-biocompatible organic solvents that are harmful to living cells. In this work, the SCNE of probiotic Lactobacillus acidophilus with water-insoluble luteolin and Fe3+ ions is achieved by the vortex-assisted, biphasic water-oil system. The process creates L. acidophilus nanoencapsulated in the luteolin-Fe3+ shells that empower the cells with extrinsic properties, such as resistance to lysozyme attack, anti-ROS ability, and α-amylase-inhibition activity, as well as sustaining viability under acidic conditions. The proposed protocol, embracing water-insoluble flavonoids as shell components in SCNE, will be an advanced add-on to the chemical toolbox for the manipulation of living cells at the single-cell level.

Synthesis, characterisation and reactivity of a zinc triazenide for potential use in vapour deposition.

In this study, we synthesised and characterised a new zinc(II) triazenide for potential use in vapour deposition of zinc sulphide thin films. The compound is volatile and quantitatively sublimes at 80 °C under vacuum (0.5 mbar). Thermogravimetric analysis showed a one-step volatilisation with an onset temperature at ∼125 °C and 5% residual mass. The compound also reacted with 2 or 4 molar equivalents of triphenylsilanethiol to give dimeric and monomeric zinc thiolates, respectively. The high volatility, thermal stability, and reactivity with sterically hindered thiols makes this compound a potential candidate for use in vapour deposition of zinc containing thin films.

Insights into emulsion synthesis of self-assembled suprastructures formed by Janus silica particles with -NH2/-SH surface groups.

Spherical particles with tunable anisotropic structures enabled by multiple surface functionalities have garnered interest for their potential applications in adsorption technologies. The presence of diverse functional groups in the surface layer, exhibiting varying acidity and hydrophilicity, can lead to unique characteristics in terms of surface structure and behaviour. In this study, the particles were synthesised using a two-step approach involving surface functionalisation of previously synthesised SiO2 Stöber particles. This was achieved by employing 3-mercaptopropyltrimethoxysilane (MPTMS) and 3-aminopropyltrimethoxysilane (APTMS) in a toluene-in-water emulsion. The resulting particles were found to be nonporous, with a specific surface area of 8 m2 g-1. Their sizes were determined to be up to 350 nm through photon cross-correlation spectroscopy. Moreover, the particles exhibited a high net content of functional groups (both amino and mercapto) of 2 mmol g-1. The organisation of the particles during synthesis was observed through SEM images, providing insights into their structural characteristics. Additionally, the study of Eu(iii), Au(iii), and Ag(i) ions and fluorescein adsorption demonstrated varying interactions on the surface, highlighting the potential applications and versatility of these functionalised particles.