Seed priming with potassium nitrate alleviates the high temperature stress by modulating growth and antioxidant potential in carrot seeds and seedlings.

Early season carrot (Daucus carota) production is being practiced in Punjab, Pakistan to meet the market demand but high temperature hampers the seed germination and seedling establishment which cause marked yield reduction. Seed priming with potassium nitrate breaks the seed dormancy and improves the seed germination and seedling growth potential but effects vary among the species and ecological conditions. The mechanism of KNO3 priming in high temperature stress tolerance is poorly understood yet. Thus, present study aimed to evaluate high temperature stress tolerance potential of carrot seeds primed with potassium nitrate and impacts on growth, physiological, and antioxidant defense systems. Carrot seeds of a local cultivar (T-29) were primed with various concentration of KNO3 (T0: unprimed (negative control), T1: hydroprimed (positive control), T2: 50 mM, T3:100mM, T4: 150 mM, T5: 200 mM, T6: 250 mM and T7: 300 mM) for 12 h each in darkness at 20 ± 2℃. Seed priming with 50 mM of KNO3 significantly enhanced the seed germination (36%), seedling growth (28%) with maximum seedling vigor (55%) and also exhibited 16.75% more carrot root biomass under high temperature stress as compared to respective control. Moreover, enzymatic activities including peroxidase, catalase, superoxidase dismutase, total phenolic contents, total antioxidants contents and physiological responses of plants were also improved in response to seed priming under high temperature stress. By increasing the level of KNO3, seed germination, growth and root biomass were reduced. These findings suggest that seed priming with 50 mM of KNO3 can be an effective strategy to improve germination, growth and yield of carrot cultivar (T-29) under high temperature stress in early cropping. This study also proposes that KNO3 may induces the stress memory by heritable modulations in chromosomal structure and methylation and acetylation of histones that may upregulate the hormonal and antioxidant activities to enhance the stress tolerance in plants.

Functional characterization of a geranylgeranyl diphosphate synthase in the leaf beetle Monolepta hieroglyphica.

Geranylgeranyl diphosphate synthase (GGPPS) as the short-chain prenyltransferases for catalyzing the formation of the acyclic precursor (E)-GGPP has been extensively investigated in mammals, plants, and microbes, but its functional plasticity is poorly understood in insect species. Here, a single GGPPS in leaf beetle Monolepta hieroglyphica, MhieGGPPS, was functionally investigated. Phylogenetic analysis showed that MhieGGPPS was clustered in one clade with homologs and had six conserved motifs. Molecular docking results indicated that binding sites of dimethylallyl diphosphate (DMAPP), (E)-geranyl pyrophosphate (GPP), and (E)-farnesyl pyrophosphate (FPP) were in the chain-length determination region of MhieGGPPS, respectively. In vitro, recombiant MhieGGPPS could catalyze the formation of (E)-geranylgeraniol against different combinations of substrates including isopentenyl pyrophosphate (IPP)/DMAPP, IPP/(E)-GPP, and IPP/(E)-FPP, suggesting that MhieGGPPS could not only use (E)-FPP but also (E)-GPP and DMAPP as the allylic cosubstrates. In kinetic analysis, the (E)-FPP was most tightly bound to MhieGGPPS than that of others. It was proposed that MhieGGPPS as a multifunctional enzyme is differentiated from the other GGPPSs in the animals and plants, which only accepted (E)-FPP as the allylic cosubstrate. These findings provide valuable insights into understanding the functional plasticity of GGPPS in M. hieroglyphica and the novel biosynthesis mechanism in the isoprenoid pathway.

The prevalence of sedentary behavior among university students in Saudi Arabia.

BACKGROUND: A considerable body of research has demonstrated that reducing sitting time benefits health. Therefore, the current study aimed to explore the prevalence of sedentary behavior (SB) and its patterns. METHODS: A total of 6975 university students (49.1% female) were chosen randomly to participate in a face-to-face interview. The original English version of the sedentary behavior questionnaire (SBQ) was previously translated into Arabic. Then, the validated Arabic version of the SBQ was used to assess SB. The Arabic SBQ included 9 types of SB (watching television, playing computer/video games, sitting while listening to music, sitting and talking on the phone, doing paperwork or office work, sitting and reading, playing a musical instrument, doing arts and crafts, and sitting and driving/riding in a car, bus or train) on weekdays and weekends. RESULTS: SBQ indicated that the total time of SB was considerably high (478.75 ± 256.60 and 535.86 ± 316.53 (min/day) during weekdays and weekends, respectively). On average, participants spent the most time during the day doing office/paperwork (item number 4) during weekdays (112.47 ± 111.11 min/day) and weekends (122.05 ± 113.49 min/day), followed by sitting time in transportation (item number 9) during weekdays (78.95 ± 83.25 min/day) and weekends (92.84 ± 100.19 min/day). The average total sitting time of the SBQ was 495.09 ± 247.38 (min/day) and 58.4% of the participants reported a high amount of sitting time (≥ 7 hours/day). Independent t-test showed significant differences (P ≤ 0.05) between males and females in all types of SB except with doing office/paperwork (item number 4). The results also showed that male students have a longer daily sitting time (521.73 ± 236.53 min/day) than females (467.38 ± 255.28 min/day). Finally, 64.1% of the males reported a high amount of sitting time (≥ 7 hours/day) compared to females (52.3%). CONCLUSION: In conclusion, the total mean length of SB in minutes per day for male and female university students was considerably high. About 58% of the population appeared to spend ≥7 h/day sedentary. Male university students are likelier to sit longer than female students. Our findings also indicated that SB and physical activity interventions are needed to raise awareness of the importance of adopting an active lifestyle and reducing sitting time.

The effect of salbutamol sulphate inhalation (an anti-asthmatic medication) on the surfaces of orthodontic Archwires.

OBJECTIVES: This study aimed to compare the surface roughness and friction of different orthodontic archwires after exposure to salbutamol sulphate inhalation, an anti-asthmatic medication. METHODS: Orthodontic archwires (stainless-steel [StSt], nickel-titanium [NiTi], beta-titanium [ß-Ti], and copper-NiTi [Cu-NiTi]) were equally divided into two groups. The exposed groups were subjected to 20 mg salbutamol sulphate for 21 days and kept in artificial saliva. The control groups were only kept in artificial saliva. Surface changes were visualized using scanning electron microscopy (SEM). The average surface roughness (Ra) was evaluated using atomic force microscopy (AFM), and friction resistance forces were assessed using a universal testing machine. Statistical analyses were performed using t-tests and ANOVA followed by post hoc tests. RESULTS: Salbutamol sulphate did not change the surface roughness of StSt and NiTi archwires (p > .05). However, the change in the surfaces of ß-Ti and Cu-NiTi archwires was significant (p < .001). The frictional forces of exposed StSt, NiTi, and Cu-NiTi archwires did not change (p > .05). However, the frictional forces of ß-Ti archwires increased significantly after exposure to salbutamol sulphate (p = .021). Brushing with fluoride after exposure to salbutamol sulphate increased the frictional forces of ß-Ti only (p = .002). CONCLUSIONS: Salbutamol sulphate inhalation significantly affected the surface texture of ß-Ti and Cu-NiTi orthodontic archwires and increased the friction of ß-Ti archwires. These deteriorating effects were not detected on the surface of StSt and NiTi archwires. Therefore, we suggest that ß-Ti and copper titanium archwires should be used cautiously in individuals under salbutamol sulphate inhalation treatment.

Long-Term Safety and Reliability of Using Tutoplast-Processed Fascia Lata to Refine the Nasal Dorsum in Primary and Revision Rhinoplasty.

BACKGROUND: Tutoplast-processed fascia lata (TPFL) is an allograft substance employed alongside cartilaginous materials to achieve optimal augmentation in rhinoplasty. Alternatively, it can be utilized to conceal and smooth irregularities of the nasal dorsum during the procedure. Despite its application, there is limited available data on the extended safety of TPFL. Consequently, our objective was to assess the enduring long-term safety and reliability of TPFL in both primary and revision rhinoplasty. METHODS: A retrospective cohort study was conducted on 300 patients who underwent primary and revision rhinoplasty with TPFL grafts. Baseline characteristics, types of surgical techniques, and surgical outcomes were evaluated. The surgical success and satisfaction rates were assessed as primary outcomes. The Statistical Package for Social Sciences (SPSS), version 27 for Windows, was used to conduct the statistical analysis. RESULTS: TPFL was used in both primary and revision rhinoplasty, with septal cartilage being the most common conjunction graft material. The overall surgical success rate was 97.3%, with only 2.7% of patients experiencing complications. The satisfaction rate was 92.7%, with no significant difference between primary and revision cases. The highest satisfaction rate was found in patients who underwent the crushed cartilage in fascia technique (96.3%). CONCLUSIONS: TPFL in conjunction with cartilaginous materials; is a safe and reliable option for dorsal augmentation and camouflage material in primary and revision rhinoplasty, with low complication and high patient satisfaction rates. LEVEL OF EVIDENCE III: This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors   www.springer.com/00266 .

Assessment of stress level and depression among orthopaedic surgeons in Saudi Arabia.

PURPOSE: The aim of this study was to assess the stress level and depression among orthopaedic surgeons in Saudi Arabia. In addition, to evaluate orthopedic training programs related factors that might have a critical role in the development of depression among orthopaedic surgeons. METHODS: The study adopted a cross-sectional study design. Two validated questionnaires were utilized, the Patient Health Questionnaire 9 (PHQ-9) and the Perceived Stress Scale (PSS-10) for assessing depressive symptoms and stress levels. Data was collected by sending the survey to the Saudi Commission for Health Specialties so they could be distributed throughout all registered orthopaedic surgeons. RESULTS: The study sample consisted of 325 participants. The results revealed that the severity of depression varied across the different groups. As per the PHQ-9 criteria, 74 (22.8%) were initially diagnosed with major depression. Among assistant consultants, 39.5% reported severe depression, while 34.9% reported mild depression. Consultants predominantly reported moderate perceived stress (82.9%) with a notable proportion experiencing high perceived stress (12.4%). Assistant consultants showed a balanced distribution, with 93.0% reporting moderate perceived stress and 4.7% reporting high perceived stress. Demographic variables gender, relationship status and having children revealed statistically significant relationship with PHQ-9 scores (p-value < 0.05) but not with PSS-10 scores. CONCLUSION: The study highlights pressing need to address mental health concerns within orthopaedic surgeons. To address these challenges, healthcare institutions should implement comprehensive mental health support programs offering resources for stress management, counseling services, and peer support groups.

NPTX1 mutations trigger endoplasmic reticulum stress and cause autosomal dominant cerebellar ataxia.

With more than 40 causative genes identified so far, autosomal dominant cerebellar ataxias exhibit a remarkable genetic heterogeneity. Yet, half the patients are lacking a molecular diagnosis. In a large family with nine sampled affected members, we performed exome sequencing combined with whole-genome linkage analysis. We identified a missense variant in NPTX1, NM_002522.3:c.1165G>A: p.G389R, segregating with the phenotype. Further investigations with whole-exome sequencing and an amplicon-based panel identified four additional unrelated families segregating the same variant, for whom a common founder effect could be excluded. A second missense variant, NM_002522.3:c.980A>G: p.E327G, was identified in a fifth familial case. The NPTX1-associated phenotype consists of a late-onset, slowly progressive, cerebellar ataxia, with downbeat nystagmus, cognitive impairment reminiscent of cerebellar cognitive affective syndrome, myoclonic tremor and mild cerebellar vermian atrophy on brain imaging. NPTX1 encodes the neuronal pentraxin 1, a secreted protein with various cellular and synaptic functions. Both variants affect conserved amino acid residues and are extremely rare or absent from public databases. In COS7 cells, overexpression of both neuronal pentraxin 1 variants altered endoplasmic reticulum morphology and induced ATF6-mediated endoplasmic reticulum stress, associated with cytotoxicity. In addition, the p.E327G variant abolished neuronal pentraxin 1 secretion, as well as its capacity to form a high molecular weight complex with the wild-type protein. Co-immunoprecipitation experiments coupled with mass spectrometry analysis demonstrated abnormal interactions of this variant with the cytoskeleton. In agreement with these observations, in silico modelling of the neuronal pentraxin 1 complex evidenced a destabilizing effect for the p.E327G substitution, located at the interface between monomers. On the contrary, the p.G389 residue, located at the protein surface, had no predictable effect on the complex stability. Our results establish NPTX1 as a new causative gene in autosomal dominant cerebellar ataxias. We suggest that variants in NPTX1 can lead to cerebellar ataxia due to endoplasmic reticulum stress, mediated by ATF6, and associated to a destabilization of NP1 polymers in a dominant-negative manner for one of the variants.

Validity and reliability of the Arabic sedentary behavior questionnaire among university students aged between 18-30 years old.

PURPOSE: The study aimed to test the validity and reliability of the Arabic version of the sedentary behavior questionnaire (SBQ). METHODS: A total of 624 university students (273 males; 351 females, mean age = 20.8 years) were recruited from Taibah University, Madinah, Saudi Arabia. For criterion and constructive validity (n = 352), the Arabic SBQ was compared with total sitting time from the International Physical Activity Questionnaire-short form (IPAQ-SF) and the International Physical Activity Questionnaire-long form (IPAQ-LF). For concurrent validity, the English and Arabic SBQ versions were given concurrently to bilingual university students (n = 122) once. For test-retest reliability, the Arabic SBQ was given twice to participants (n = 150) at a one-week interval. RESULTS: Sitting time of IPAQ-SF (7th question: sitting time on weekdays) and IPAQ-LF (21st question: sitting time on weekdays and 22nd question: sitting time on weekends) correlated significantly with total sitting time/week of the Arabic SBQ (r = 0.29, p = 0.003; r = 0.14, p = 0.02, respectively). Motorized transportation measured with the IPAQ-LF correlated significantly with time spent driving in a car, bus, or train from the Arabic SBQ on weekdays and weekends (r = 0.53, p < 0.001; r = 0.44 p < 0.001, respectively). The total sitting time of the Arabic SBQ was inversely correlated with BMI (r = -0.18, p = 0.001). The correlations between the Arabic and the English SBQ versions ranged from 0.25-0.96; p < 0.001 on weekdays and 0.50-0.90; p < 0.001 on weekends. Moderate to good reliability was also found between test and retest for all SBQ items and total score during weekdays (0.72 to 0.8), and weekends (0.64 to 0.87), with exception of the 7th item "play musical instrument", ICC = 0.46). Mean difference of test-retest of the Arabic SBQ was not significantly different from zero for the total sitting time of the Arabic SBQ (t = -0.715, P = 0.476). CONCLUSION: The Arabic SBQ had satisfactory levels of reliability, with total sitting time of the Arabic SBQ correlating significantly with sitting times derived from IPAQ-SF, IPAQ-LF, and the English SBQ versions. Hence, the Arabic SBQ can be used as a tool to measure sedentary behavior among adult Arabs aged between 18 to 30 years old in future epidemiologic and clinical practice.

The need for non-technical skills education in orthopedic surgery.

BACKGROUND: The issue of surgical safety has increased significantly over the last few decades. Several studies have established that it is linked to non-technical performance, rather than clinical competencies. Non-technical skills can be blended with technical training in the surgical profession to improve surgeons' abilities and enhance patient care and procedural skills. The main goal of this study was to determine orthopedic surgeons' requirements of non-technical skills, and to identify the most pressing issues. METHODS: We conducted a self-administered online questionnaire survey in this cross-sectional study. The questionnaire was piloted, validated, pretested, and clearly stated the study's purpose. After the pilot, minor wording and questions were clarified before starting the data collection. Orthopedic surgeons from the Middle East and Northern Africa were invited. The questionnaire was based on a five-point Likert scale, the data were analyzed categorically, and variables were summarized as descriptive statistics. RESULTS: Of the 1713 orthopedic surgeons invited, 60% completed the survey (1033 out of 1713). The majority demonstrated a high likelihood of participating in such activities in the future (80.5%). More than half (53%) of them preferred non-technical skills courses to be part of major orthopedic conferences, rather than independent courses. Most (65%) chose them to be face-to-face. Although 97.2% agreed on the importance of these courses, only 27% had attended similar courses in the last three years. Patient safety, infection prevention and control, and communication skills were ranked at the top as topics to be addressed. Moreover, participants indicated they would most likely attend courses on infection prevention and control, patient safety and teamwork, and team management. CONCLUSION: The results highlight the need for non-technical skills training in the region and the general preferences regarding modality and setting. These findings support the high demand from orthopedic surgeons' perspective to develop an educational program on non-technical skills.

Assessment of the Antivirulence Potential of Tamarix aphylla Ethanolic Extract against Multidrug-Resistant Streptococcus mutans Isolated from Iraqi Patients.

Halophytes have long been used for medicinal purposes. However, their use was entirely empirical, with no knowledge of the bioactive compounds. The plant Tamarix aphylla L. has not drawn the deserving attention for its phytochemical and bioactive explorations, but available data expressed its needs to be attended for its potential. The Streptococcus mutans SpaP gene (cell-surface antigen) mediates the binding of these bacteria to tooth surfaces. The growing problem of antibiotic resistance triggered the research on alternative antimicrobial approaches. Our study aims to explore the activity of T. aphylla ethanolic extract against the virulence gene found in Streptococcus mutans pathogenic bacteria. Samples that were previously collected and identified in our previous work (in press) were obtained from different dental clinics and hospitals in Baghdad. Three nonbiofilm-forming bacterial isolates having multidrug resistance (MDR) for 10 antibiotics (doxycycline, ofloxacin, tetracycline, erythromycin, vancomycin, clindamycin, rifampicin, imipenem, amikacin, and cefepime) were selected to examine the potential of the T. aphylla ethanolic extract. The ethanolic extract showed high antimicrobial activity against MDR. Minimum inhibition concentration (MIC) for the extract was 17.5 mg/ml, while minimum bactericidal concentration (MBC) was 35 mg/ml. The phytochemical compounds present in the ethanolic extract were determined by using high-performance liquid chromatography (HPLC) which revealed that the leaves contain thirteen different alkaloids, twelve flavonoids, and four vitamins. The extract strongly inhibited a virulence property, the adherence of S. mutans which reduced during critical growth phases. The one-step RT-PCR method was used to study the SpaP gene expression of bacterial isolates which significantly reduced. In conclusion, extraction of T. aphylla leaves showed an antimicrobial effect against MDR S. mutans. The identified phytochemicals in the T. aphylla extract are reported to be biologically important and need further investigation to develop safe and cheap drugs.

Graphene Nanocomposites as Innovative Materials for Energy Storage and Conversion-Design and Headways.

This review mainly addresses applications of polymer/graphene nanocomposites in certain significant energy storage and conversion devices such as supercapacitors, Li-ion batteries, and fuel cells. Graphene has achieved an indispensable position among carbon nanomaterials owing to its inimitable structure and features. Graphene and its nanocomposites have been recognized for providing a high surface area, electron conductivity, capacitance, energy density, charge-discharge, cyclic stability, power conversion efficiency, and other advanced features in efficient energy devices. Furthermore, graphene-containing nanocomposites have superior microstructure, mechanical robustness, and heat constancy characteristics. Thus, this state-of-the-art article offers comprehensive coverage on designing, processing, and applying graphene-based nanoarchitectures in high-performance energy storage and conversion devices. Despite the essential features of graphene-derived nanocomposites, several challenges need to be overcome to attain advanced device performance.

Exploring the Most Effective Apical Seal for Contemporary Bioceramic and Conventional Endodontic Sealers Using Three Obturation Techniques.

Background and Objective: Despite a plethora of studies conducted to date, researchers continue to investigate the best sealer and obturation technique combinations. The aim of this study is to compare the apical seal provided by two bioceramic sealers (Endoseal and Endosequence) with that provided by a calcium hydroxide sealer (Sealapex), and to evaluate the effect of different obturation techniques (cold lateral condensation, continuous wave compaction and single cone) on the apical seal under a stereomicroscope. Materials and Methods: A total of 110 single-rooted mandibular premolar teeth were decoronated, cleaned and shaped using the Endosequence filing system to tip size 30/0.04 taper. Canals were irrigated with 5.25% NaOCl and 17% EDTA. The samples were randomly divided into 11 groups (9 experimental and 2 control groups) according to the designated sealer and technique. Samples were stored in an incubator for 7 days at 37 °C under 100% humidity. Samples were coated with nail varnish except for apical 2 mm and vertically placed in 0.2% rhodamine B dye solution for 48 h. Samples were split longitudinally and viewed under a stereomicroscope at 40× magnification. Results: Insignificant results were obtained between obturation techniques (p = 0.499) whereas statistically significant results were attained based on the type of endodontic sealer (p < 0.001). The overall lowest mean apical microleakage and best sealing ability was demonstrated by Sealapex (2.59 ± 1.20 mm) and amongst techniques by continuous wave compaction (3.90 ± 2.51 mm). Conclusions: Endosequence produced the best apical seal with the continuous wave compaction technique, whereas Endoseal did so with the bioceramic-coated single-cone technique. For the Sealapex sealer, the most effective apical seal was observed using cold lateral condensation. The quality and effectiveness of apical seal differed with the type of endodontic sealer and obturation technique used, and vice versa.

Tranexamic acid in head and neck procedures: a systematic review and meta-analysis of randomized controlled trials.

OBJECTIVE: We conducted a meta-analysis of all randomized controlled trials (RCTs) that examined the benefits of tranexamic acid (TXA) among cancer patients undergoing head and neck (H&N) procedures. METHODS: We screened five databases from inception until 20 June 2021 and evaluated the risk of bias of the eligible studies. We pooled continuous outcomes using the weighted mean difference (WMD) with 95% confidence interval (CI). RESULTS: Five studies, comprising seven RCTs, met the inclusion criteria. This meta-analysis included a total of 540 patients; 265 and 275 patients were assigned to the TXA and control group, respectively. Overall, the included RCTs revealed a low risk of bias. The volume of postoperative bleeding was significantly lower in favor of the TXA group compared with the control group (n = 7 RCTs, WMD = - 51.33 ml, 95% CI [- 101.47 to - 1.2], p = 0.04). However, no significant difference was found between both groups regarding the volume of intraoperative bleeding (n = 6 RCTs, WMD = - 3.48 ml, 95% CI [- 17.11 to 10.15], p = 0.62), postoperative hemoglobin (n = 3 RCTs, WMD = 0.42 mg/dl, 95% CI [- 0.27 to 1.11], p = 0.23), duration of drainage tube removal (n = 4 RCTs, MD = - 0.41 days, 95% CI [- 1.14 to 0.32], p = 0.27), and operation time (n = 6 RCTs, WMD = 1.59 min, 95% CI [- 10.09 to 13.27], p = 0.79). TXA was safe and did not culminate in thromboembolic events or major coagulation derangements. CONCLUSION: TXA administration is safe and significantly reduces the volume of postoperative bleeding. However, no difference is identified between TXA and control groups regarding the volume of intraoperative bleeding, postoperative hemoglobin level, duration of drainage tube removal, and operation time.

Intermolecular CH-π Electrons Interaction in Poly (9,9-dioctylfluorenyl-2,7-diyl) (PFO): An Experimental and Theoretical Study.

This study demonstrates the presence of CH-π interaction in poly [9,9-dioctylfluorenyl-2,7-diyl] (PFO-1) due to an aggregate formation of PFO-1 in the liquid state. The absorption spectra of PFO-1 in certain solvents at low concentrations showed a single band at 390 nm. However, when using high concentrations, a new band at 437 nm appeared. This band is due to the aggregate formation of PFO-1. The aggregate formation occurs as a result of the CH interaction of the n-alkyl side chains with π-electrons in the benzene ring. The optical characteristics of another conjugated polymer of poly [9,9-di-(2-ethylhexyl)-fluorenyl-2,7-diyl] (PFO-2) were investigated to confirm the CH-π interaction. The absorption showed only one wavelength at 390 nm without any new band at the end of the spectrum, even at higher concentrations and lower temperatures. The main reason for the absence of aggregate formation in PFO-2 is the sterical hindrance caused by the branched alkyl side chains. In addition, Density Functional Theory (DFT) was used to compute the HOMO-LUMO transitions, electron charge distribution, and frontier molecular orbitals for each polymer. The Mulliken charge distribution and demonstrated a notable difference in the reactivity of the alkyl side chain, confirming the higher ability of PFO-1 to form CH-π bonds. docking model emphasized that the band at 437 nm could be attributed to the interaction between CH in the n-alkyl side chain and π bonds in the aromatic rings of PFO-1.

Application of Synthesized Vanadium-Titanium Oxide Nanocomposite to Eliminate Rhodamine-B Dye from Aqueous Medium.

In this study, a V@TiO2 nanocomposite is examined for its ability to eliminate carcinogenic Rhodamine (Rh-B) dye from an aqueous medium. A simple ultrasonic method was used to produce the nanosorbent. In addition, V@TiO2 was characterized using various techniques, including XRD, HRTEM, XPS, and FTIR. Batch mode studies were used to study the removal of Rh-B dye. In the presence of pH 9, the V@TiO2 nanocomposite was able to remove Rh-B dye to its maximum extent. A correlation regression of 0.95 indicated that the Langmuir model was a better fit for dye adsorption. Moreover, the maximum adsorption capacity of the V@TiO2 nanocomposite was determined to be 158.8 mg/g. According to the thermodynamic parameters, dye adsorption followed a pseudo-first-order model. Based on the results of the study, a V@TiO2 nanocomposite can be reused for dye removal using ethanol.

First Report of Fruit Rot of Cherry and Its Control Using Fe2O3 Nanoparticles Synthesized in Calotropis procera.

Cherry is a fleshy drupe, and it is grown in temperate regions of the world. It is perishable, and several biotic and abiotic factors affect its yield. During April-May 2021, a severe fruit rot of cherry was observed in Swat and adjacent areas. Diseased fruit samples were collected, and the disease-causing pathogen was isolated on PDA. Subsequent morphological, microscopic, and molecular analyses identified the isolated pathogen as Aspergillus flavus. For the control of the fruit rot disease of cherry, iron oxide nanoparticles (Fe2O3 NPs) were synthesized in the leaf extract of Calotropis procera and characterized. Fourier transform infrared (FTIR) spectroscopy of synthesized Fe2O3 NPs showed the presence of capping and stabilizing agents such as alcohols, aldehydes, and halo compounds. X-ray diffraction (XRD) analysis verified the form and size (32 nm) of Fe2O3 NPs. Scanning electron microscopy (SEM) revealed the spinal-shaped morphology of synthesized Fe2O3 NPs while X-ray diffraction (EDX) analysis displayed the occurrence of main elements in the samples. After successful preparation and characterization of NPs, their antifungal activity against A. flavus was determined by poison technique. Based on in vitro and in vivo antifungal activity analyses, it was observed that 1.0 mg/mL concentration of Fe2O3 can effectively inhibit the growth of fungal mycelia and decrease the incidence of fruit rot of cherry. The results confirmed ecofriendly fungicidal role of Fe2O3 and suggested that their large-scale application in the field to replace toxic chemical fungicides.

Biological Applications of Ball-Milled Synthesized Biochar-Zinc Oxide Nanocomposite Using Zea mays L.

Nanotechnology is one of the vital and quickly developing areas and has several uses in various commercial zones. Among the various types of metal oxide-based nanoparticles, zinc oxide nanoparticles (ZnO NPs) are frequently used because of their effective properties. The ZnO nanocomposites are risk-free and biodegradable biopolymers, and they are widely being applied in the biomedical and therapeutics fields. In the current study, the biochar-zinc oxide (MB-ZnO) nanocomposites were prepared using a solvent-free ball-milling technique. The prepared MB-ZnO nanocomposites were characterized through scanning electron microscopy (SEM), energy-dispersive X-ray (EDX) spectroscopy, X-ray powder diffraction (XRD), and thermogravimetric analysis (TGA), Fourier-transform infrared spectroscopy (FTIR), and ultraviolet-visible (UV) spectroscopy. The MB-ZnO particles were measured as 43 nm via the X-ray line broadening technique by applying the Scherrer equation at the highest peak of 36.36°. The FTIR spectroscope results confirmed MB-ZnO's formation. The band gap energy gap values of the MB-ZnO nanocomposites were calculated as 2.77 eV by using UV-Vis spectra. The MB-ZnO nanocomposites were tested in various in vitro biological assays, including biocompatibility assays against the macrophages and RBCs and the enzymes' inhibition potential assay against the protein kinase, alpha-amylase, cytotoxicity assays of the leishmanial parasites, anti-inflammatory activity, antifungal activity, and antioxidant activities. The maximum TAC (30.09%), TRP (36.29%), and DPPH radicals' scavenging potential (49.19%) were determined at the maximum dose of 200 µg/mL. Similarly, the maximum activity at the highest dose for the anti-inflammatory (76%), at 1000 µg/mL, alpha-amylase inhibition potential (45%), at 1000 µg/mL, antileishmanial activity (68%), at 100 µg/mL, and antifungal activity (73 ± 2.1%), at 19 mg/mL, was perceived, respectively. It did not cause any potential harm during the biocompatibility and cytotoxic assay and performed better during the anti-inflammatory and antioxidant assay. MB-ZnO caused moderate enzyme inhibition and was more effective against pathogenic fungus. The results of the current study indicated that MB-ZnO nanocomposites could be applied as effective catalysts in various processes. Moreover, this research provides valuable and the latest information to the readers and researchers working on biopolymers and nanocomposites.

Promoting Effect of Soluble Polysaccharides Extracted from Ulva spp. on Zea mays L. Growth.

Seaweeds can play a vital role in plant growth promotion. Two concentrations (5 and 10 mg/mL) of soluble polysaccharides extracted from the green macroalgae Ulva fasciata and Ulva lactuca were tested on Zea mays L. The carbohydrate and protein contents, and antioxidant activities (phenols, ascorbic, peroxidase, and catalase) were measured, as well as the protein banding patterns. The soluble polysaccharides at 5 mg/mL had the greatest effect on the base of all of the parameters. The highest effects of soluble polysaccharides on the Zea mays were 38.453, 96.76, 4, 835, 1.658, 7.462, and 38615.19, mg/mL for carbohydrates, proteins, phenol, µg ascorbic/mL, mg peroxidase/g dry tissue, and units/g tissue of catalase, respectively. The total number of protein bands (as determined by SDS PAGE) was not changed, but the density of the bands was correlated to the treatments. The highest band density and promoting effect were correlated to 5 mg/mL soluble polysaccharide treatments extracted from Ulva fasciata in Zea mays, which can be used as a biofertilizer.

Factors influencing the orthodontic treatment plan in Class II malocclusion.

INTRODUCTION: This study aimed to investigate the influence of orthodontists' demographics and patient characteristics on the orthodontic treatment plan decision for borderline Class II Division 1 malocclusion in growing patients. METHODS: An electronic survey was distributed to orthodontists through the American Association of Orthodontists. Participating orthodontists were asked to select their preferred orthodontic treatment plan for 3 patients with borderline Class II Division 1 malocclusion. The survey also included questions about the patient-related factors contributing to the treatment decision for each patient. RESULTS: A total of 113 orthodontists completed the survey. United States-trained orthodontists were more likely to select growth modification and nonextraction relative to extraction (odds ratio, 3.50; 95% confidence interval, 1.01-12.12; odds ratio, 3.59; 95% confidence interval, 1.18-10.91, respectively). Clinicians with >15 years of experience were 72% less likely to prefer nonextraction relative to extraction in 1 patient and were 67% less likely to prefer growth modification relative to extraction in another patient. Working solely in private practice was associated with higher, but not statistically significant, odds of growth modification and nonextraction. The practice location was also associated with treatment plan decisions; however, findings were inconsistent between the patients. CONCLUSIONS: The orthodontist's experience, place of education, location, and type of practice appear to influence the preferred treatment plan for Class II malocclusion. Overall, the patient's profile and age were the most considered patient-related factors for growth modification, whereas the patient's profile, amount of crowding, and smile esthetics were the most considered factors for preferring extraction and nonextraction treatment modalities.

The environmental, economic, and social development impact of desertification in Iraq: a review on desertification control measures and mitigation strategies.

The threat of desertification is considered a global concern that occurs in many environments in different parts of the world, where extensive lands are transformed gradually into desert or semi-desert areas, and this causes economic and health issues. Iraq and many other parts of the Middle East are facing desertification threats in the last twenty years. Despite the significance of this issue, relevant reviews are scarce. The removal of vegetation cover, overgrazing, deforestation in times of war, poor irrigation practices and water scarcity are some of the main causes of desertification in Iraq. Fighting desertification requires cooperative efforts including the utilization of innovative practices, biotechnological approaches, restoration of oases, continuous reforestation, and rehabilitation of agricultural lands. The objective of this review article is to discuss the causes of desertification and land degradation in Iraq, highlighting the main natural and human factors involved, and the consequent impact on the national security, economy, society, and health. In addition, it suggests recommendations for policies and actions that can be integrated to mitigate this problem.