RESUMO
Chronic wounds are a major health concern and they affect the lives of more than 25 million people in the United States. They are susceptible to infection and are the leading cause of nontraumatic limb amputations worldwide. The wound environment is dynamic, but their healing rate can be enhanced by administration of therapies at the right time. This approach requires real-time monitoring of the wound environment with on-demand drug delivery in a closed-loop manner. In this paper, a smart and automated flexible wound dressing with temperature and pH sensors integrated onto flexible bandages that monitor wound status in real-time to address this unmet medical need is presented. Moreover, a stimuli-responsive drug releasing system comprising of a hydrogel loaded with thermo-responsive drug carriers and an electronically controlled flexible heater is also integrated into the wound dressing to release the drugs on-demand. The dressing is equipped with a microcontroller to process the data measured by the sensors and to program the drug release protocol for individualized treatment. This flexible smart wound dressing has the potential to significantly impact the treatment of chronic wounds.
RESUMO
Nanoparticles have been used for engineering composite materials to improve the intrinsic properties and/or add functionalities to pristine polymers. The majority of the studies have focused on the incorporation of spherical nanoparticles within the composite fibers. Herein, we incorporate anisotropic branched-shaped zinc oxide (ZnO) nanoparticles into fibrous scaffolds fabricated by electrospinning. The addition of the branched particles resulted in their protrusion from fibers, mimicking the architecture of a rose stem. We demonstrated that the encapsulation of different-shape particles significantly influences the physicochemical and biological activities of the resultant composite scaffolds. In particular, the branched nanoparticles induced heterogeneous crystallization of the polymeric matrix and enhance the ultimate mechanical strain and strength. Moreover, the three-dimensional (3D) nature of the branched ZnO nanoparticles enhanced adhesion properties of the composite scaffolds to the tissues. In addition, the rose stem-like constructs offered excellent antibacterial activity, while supporting the growth of eukaryote cells.
Assuntos
Nanofibras/química , Nanopartículas/química , Alicerces Teciduais/química , Óxido de Zinco/química , Antibacterianos/química , Antibacterianos/farmacologia , Bactérias/efeitos dos fármacos , Aderência Bacteriana/efeitos dos fármacos , Infecções Bacterianas/prevenção & controle , Linhagem Celular , Humanos , Teste de Materiais , Nanofibras/ultraestrutura , Nanopartículas/ultraestrutura , Nanoestruturas/química , Nanoestruturas/ultraestrutura , Estresse Mecânico , Resistência à Tração , Engenharia Tecidual , Óxido de Zinco/farmacologiaRESUMO
In the post-genome age, proteomics is receiving significant attention because they provide an invaluable source of biological structures and functions at the protein level. The search for disease-specific biomarkers for diagnostic and/or therapeutic applications is one of the areas that proteomics is having a significant impact. Thus, the identification of a "good" biomarker enables a more accurate early diagnosis and prognosis of disease. Rapid advancements in mass spectrometry (MS) instrumentation, liquid chromatography MS (LCMS), protein microarray technology, and other protein profiling methodologies have a substantial expansion of our toolbox to identify disease-specific protein and peptide biomarkers. This review covers a selection of widely used proteomic technologies for biomarker discovery. In addition, we describe the most commonly used approaches for diagnosis based on proteomic biomarkers and further discuss trends and critical challenges during development of cost-effective rapid diagnostic tests and microfluidic diagnostic systems based on proteomic biomarkers.
Assuntos
Biomarcadores/análise , Testes Diagnósticos de Rotina/métodos , Proteômica/métodosRESUMO
Helicobacter pylori is responsible for worldwide chronic bacterial infection in humans affecting approximately half of the world's population. H. pylori is associated with significant morbidity and mortality including gastric cancer. The infection has both direct and indirect impacts on economic and overall well-being of patients; hence, there is a great need for diagnostic markers that could be used in the development of diagnostic kits. Here, we briefly review general aspects of H. pylori infection and the diagnostic biomarkers used in laboratory tests today with a focus on the potential role of microfluidic systems in future immunodiagnosis platforms.
Assuntos
Biomarcadores/sangue , Infecções por Helicobacter/diagnóstico , Helicobacter pylori/isolamento & purificação , Infecções por Helicobacter/sangue , Humanos , Técnicas Analíticas MicrofluídicasRESUMO
BACKGROUND: Nowadays combined high tibial osteotomy and ACL reconstruction is accepted as a safe and effective surgery for patients with symptomatic varus osteoarthritis and anterior knee instability; however, the source of varus deformity is sometimes the femoral bone. No studies have reported concomitant ACL reconstruction and distal femoral osteotomy in ACL-deficient knees with femoral varus deformity and medial osteoarthritis till now. This prospective study presents the technique and clinical outcome of a consecutive series of simultaneous lateral closed-wedge distal femoral osteotomy and ACL reconstruction. METHODS: Nineteen patients with confirmed ACL rupture and femoral varus deformity (mechanical lateral distal femoral angle ≥ 93°) associated with medial osteoarthritis (± lateral thrust) were included the study. The patients underwent simultaneous lateral closed-wedge distal femoral osteotomy and ACL reconstruction. At the end of one year follow up, the final range of motion and stability of the knees and the last alignment of extremities were recorded. Surgical outcomes were assessed on 2000 IKDS subjective scores and KOOS subscales. RESULTS: The mean preoperative varus knee was 10.6° (±2.2°) mostly from the femoral side. The mean union time was 3.2 (±0.4) months. Regarding the radiological evaluation, the alignment of extremity and mLDFA were corrected significantly compared to the pre-operative findings. At the end of one year follow up, all patients were free of knee instability. Subjective assessment based on questionnaires showed a significant improvement in all aspects of knee function after surgery, however there was no considerable change in the knees range of motion. CONCLUSION: Simultaneous lateral closed- wedge distal femoral osteotomy and ACL reconstruction is a valuable procedure in femoral varus knees with medial osteoarthritis and anterior knee instability. After one year follow up all aspects of knee function were improved without serious complications.
RESUMO
A basic prerequisite for the survival and function of three-dimensional (3D) engineered tissue constructs is the establishment of blood vessels. 3D bioprinting of vascular networks with hierarchical structures that resemble in vivo structures has allowed blood circulation within thick tissue constructs to accelerate vascularization and enhance tissue regeneration. Successful rapid vascularization of tissue constructs requires synergy between fabrication of perfusable channels and functional bioinks that induce angiogenesis and capillary formation within constructs. Combinations of 3D bioprinting techniques and four-dimensional (4D) printing concepts through patterning proangiogenic factors may offer novel solutions for implantation of thick constructs. In this review, we cover current bioprinting techniques for vascularized tissue constructs with vasculatures ranging from capillaries to large blood vessels and discuss how to implement these approaches for patterning proangiogenic factors to maintain long-term, stimuli-controlled formation of new capillaries.
Assuntos
Bioimpressão/métodos , Neovascularização Fisiológica , Engenharia Tecidual/métodos , Animais , Bioimpressão/instrumentação , Desenho de Equipamento , Humanos , Impressão Tridimensional/instrumentação , Engenharia Tecidual/instrumentação , Alicerces Teciduais/químicaRESUMO
BACKGROUND: Viral protein-1 (VP1) is a major capsid protein of Coxsakievirus B3 (CVB3) that plays an important role in directing viruses towards permissive cells and acts as a main antigenic site of the virus in eliciting of host immune response, hence it seems VP1 can be considered as a vaccine candidate against CVB3 infection. In this study, cDNA of VP1 was prepared, cloned into pET expression vector and the recombinant protein (VP1) was over expressed in E. coli. METHODS: The viruses were grown in suspension cultures of Vero cells with an input virus multiplicity of 10-50 plaque-forming units/cell. After observing complete cytopathic effect, the total RNA (cells and virus) was prepared for RT-PCR and by using specific primers, VP1 cDNA was amplified and ligated into pET vectors (32 a and 28 a). The recombinant vector was transferred into competent E. coli (BL-21) and after selection of proper colony, which carried correct cDNA within the vector; cells were cultured and induced with isopropyl B-D-thiogalactopyranoside, in order to express protein (VP1). The cultures were tested for presence of VP1 by SDS-PAGE and Western-Blotting analysis. RESULTS: Molecular techniques such as PCR which showed exact defined size of the VP1 (819 bp), restriction digestion and finally immunoblot analysis of over expressed protein; all confirmed the correct cloning and expression of VP1 in this research. CONCLUSION: In this research, full length of VP1 as major capsid protein of CVB3 was over expressed in E. coli which, can be used for further studies, including neutralizing antibody production against CVB3.
Assuntos
Enterovirus Humano B/genética , Proteínas Estruturais Virais/genética , Animais , Sequência de Bases , Chlorocebus aethiops , Clonagem Molecular , Primers do DNA/genética , DNA Viral/genética , Enterovirus Humano B/classificação , Enterovirus Humano B/patogenicidade , Escherichia coli/genética , Expressão Gênica , Genes Virais , Vetores Genéticos , Proteínas Recombinantes/biossíntese , Proteínas Recombinantes/química , Proteínas Recombinantes/genética , Reação em Cadeia da Polimerase Via Transcriptase Reversa , Células Vero , Proteínas Estruturais Virais/biossíntese , Proteínas Estruturais Virais/químicaRESUMO
Engineering bone tissue requires the generation of a highly organized vasculature. Cellular behavior is affected by the respective niche. Directing cellular behavior and differentiation for creating mineralized regions surrounded by vasculature can be achieved by controlling the pattern of osteogenic and angiogenic niches. This manuscript reports on engineering vascularized bone tissues by incorporating osteogenic and angiogenic cell-laden niches in a photocrosslinkable hydrogel construct. Two-step photolithography process is used to control the stiffness of the hydrogel and distribution of cells in the patterned hydrogel. In addittion, osteoinductive nanoparticles are utilized to induce osteogenesis. The size of microfabricated constructs has a pronounced effect on cellular organization and function. It is shown that the simultaneous presence of both osteogenic and angiogenic niches in one construct results in formation of mineralized regions surrounded by organized vasculature. In addition, the presence of angiogenic niche improves bone formation. This approach can be used for engineered constructs that can be used for treatment of bone defects.
Assuntos
Hidrogéis/química , Animais , Regeneração Óssea , Humanos , Nanopartículas/química , Osteogênese/fisiologia , Engenharia Tecidual/métodosRESUMO
Prevention of postsurgery infection and promotion of biointegration are the key factors to achieve long-term success in orthopedic implants. Localized delivery of antibiotics and bioactive molecules by the implant surface serves as a promising approach toward these goals. However, previously reported methods for surface functionalization of the titanium alloy implants to load bioactive ingredients suffer from time-consuming complex processes and lack of long-term stability. Here, we present the design and characterization of an adhesive, osteoconductive, and antimicrobial hydrogel coating for Ti implants. To form this multifunctional hydrogel, a photo-cross-linkable gelatin-based hydrogel was modified with catechol motifs to enhance adhesion to Ti surfaces and thus promote coating stability. To induce antimicrobial and osteoconductive properties, a short cationic antimicrobial peptide (AMP) and synthetic silicate nanoparticles (SNs) were introduced into the hydrogel formulation. The controlled release of AMP loaded in the hydrogel demonstrated excellent antimicrobial activity to prevent biofilm formation. Moreover, the addition of SNs to the hydrogel formulation enhanced osteogenesis when cultured with human mesenchymal stem cells, suggesting the potential to promote new bone formation in the surrounding tissues. Considering the unique features of our implant hydrogel coating, including high adhesion, antimicrobial capability, and the ability to induce osteogenesis, it is believed that our design provides a useful alternative method for bone implant surface modification and functionalization.
Assuntos
Hidrogéis/química , Animais , Bivalves , Materiais Revestidos Biocompatíveis , Humanos , Células-Tronco Mesenquimais , Osteogênese , TitânioRESUMO
BACKGROUND: Helicobacter pylori is a human pathogen and during the process of infection, antigens from the bacterium elicit strong host humoral immune responses. In our previous report, native H. pylori UreG protein showed good reactivity with sera from H. pylori patients. This study was aimed at producing the recombinant form of the protein (rUreG) and determining its seroreactivities. METHODS: The coding sequence of H. pylori UreG was cloned and the recombinant protein expressed and purified by affinity chromatography using nickel nitrilotriacetic acid (Ni-NTA) resin. The antigenicity of rUreG to detect H. pylori specific antibodies was determined by western blot, using HRP-conjugated anti-human IgG and IgA antibodies as probes. A total of 70 sera, comprising 30 positive and 40 control serum samples, were used. The positive sera were from culture-positive H. pylori-infected patients with duodenal ulcers, gastric ulcers, or gastritis. The control sera comprised three types of samples without detectable H. pylori antibodies, i.e. healthy individuals (with no history of gastric disorders) (n = 10); patients who attended an endoscopy clinic (because of gastrointestinal complaints) but were H. pylori culture negative (n = 20); and people with other diseases (n = 10). Additionally, hyperimmune mice serum against rUreG was raised and tested with the native and recombinant UreG protein. RESULTS: The ureG gene fragment was successfully cloned and expressed in both soluble and insoluble forms. Western blots on rUreG protein showed 70% (21/30) and 60% (18/30) reactivity with patients' sera when probed with HRP-conjugated anti-human IgG and IgA antibodies, respectively; and the combination of the IgG and IgA western blots showed reactivity of 83.3% (25/30). By comparison, 97.5% and 92.5% of the control sera showed no reactivity when probed with HRP-conjugated anti-human IgG and IgA antibodies, respectively. Both the H. pylori lysate antigen and rUreG protein displayed a distinctive band at the expected molecular weight when probed with the hyperimmune mice serum. CONCLUSION: The rUreG protein was successfully cloned and expressed and showed good reactivity with H. pylori culture-positive patients' sera and no reactivity with most control sera. Thus, the diagnostic potential of this recombinant protein merits further investigation.
Assuntos
Proteínas de Bactérias/genética , Proteínas de Bactérias/imunologia , Proteínas de Transporte/genética , Proteínas de Transporte/imunologia , Clonagem Molecular , Epitopos , Infecções por Helicobacter/imunologia , Infecções por Helicobacter/microbiologia , Helicobacter pylori/genética , Helicobacter pylori/imunologia , Animais , Anticorpos Antibacterianos/sangue , Especificidade de Anticorpos , Proteínas de Bactérias/biossíntese , Proteínas de Bactérias/isolamento & purificação , Western Blotting , Proteínas de Transporte/biossíntese , Proteínas de Transporte/isolamento & purificação , Estudos de Casos e Controles , Cromatografia de Afinidade , Infecções por Helicobacter/sangue , Infecções por Helicobacter/diagnóstico , Helicobacter pylori/metabolismo , Humanos , Imunoglobulina A/sangue , Imunoglobulina G/sangue , Camundongos , Peso Molecular , Proteínas de Ligação a Fosfato , Valor Preditivo dos Testes , Proteínas Recombinantes/genética , Proteínas Recombinantes/imunologia , Testes SorológicosRESUMO
Cystic echinococcosis (CE) caused by infection with Echinococcus granulosus is of major concern for humans in many parts of the world. Antigen B was prepared from E. granulosus hydatid fluid, and Western blots confirmed eight batches showing a band corresponding to the 8-/12-kDa subunit with positive serum and no low-molecular mass band (< 15 kDa) with negative serum. The batches were pooled and used to prepare lateral flow immunoglobulin G4 (IgG4) and IgG dipsticks. Diagnostic sensitivity was determined using serum samples from 21 hydatidosis patients, and diagnostic specificity was established using sera from 17 individuals infected with other parasites and 15 healthy people. IgG4 dipstick had a diagnostic sensitivity of 95% (20 of 21) and a specificity of 100% (32 of 32). The IgG dipstick had a sensitivity of 100% (21 of 21) and a specificity of 87.5% (28 of 32). Thus, both IgG and IgG4 dipsticks had high sensitivities, but IgG4 had greater specificity for the diagnosis of human CE.
Assuntos
Equinococose/diagnóstico , Equinococose/imunologia , Echinococcus granulosus/imunologia , Lipoproteínas/imunologia , Animais , Anticorpos Anti-Helmínticos/sangue , Anticorpos Anti-Helmínticos/imunologia , Antígenos de Helmintos/sangue , Antígenos de Helmintos/imunologia , Eletroforese em Gel de Poliacrilamida , Ouro , Humanos , Imunoglobulina G/sangue , Imunoglobulina G/imunologia , Lipoproteínas/sangue , Nanopartículas Metálicas/química , Sensibilidade e EspecificidadeRESUMO
Hydatidosis is a public health problem in many parts of the world, and improvement in diagnosis of the disease is still being pursued. Protoscoleces of Echinococcus granulosus were isolated from hydatid cysts collected from naturally infected sheep slaughtered in abattoirs in Iran. Sonicated extract of protoscolex was subjected to two-dimensional gel electrophoresis and Western blot analysis. Primary antibodies were from serum samples from 130 hydatidosis patients, 38 individuals infected with other parasitic infections, and 30 healthy people, whereas peroxidase (HRP)-conjugated anti-human IgG and IgG4 were used as secondary antibodies. The recombinant form of the identified protein was produced and tested for its sensitivity and specificity for the detection of human hydatidosis. An antigenic band of â¼60 kDa was found to be sensitive (82%) and specific (100%) for the detection of hydatidosis when probed with anti-human IgG4-HRP, while the sensitivity and specificity were 33 and 100%, respectively, with anti-human IgG-HRP. By mass spectrometry, the band was identified as protoscolex tegument paramyosin. The sensitivity and specificity of full-length paramyosin-recombinant protein in IgG4 blots were found to be 86 and 98%, respectively. In conclusion, IgG4 detection of Echinococcus granulosus paramyosin was found to be useful for the diagnosis of human hydatidosis.
Assuntos
Anticorpos Anti-Helmínticos/sangue , Antígenos de Helmintos , Testes Diagnósticos de Rotina/métodos , Equinococose/diagnóstico , Echinococcus granulosus/imunologia , Imunoglobulina G/sangue , Tropomiosina , Animais , Antígenos de Helmintos/química , Antígenos de Helmintos/genética , Humanos , Imunoensaio/métodos , Irã (Geográfico) , Peso Molecular , Proteínas Recombinantes/química , Proteínas Recombinantes/genética , Sensibilidade e Especificidade , Tropomiosina/química , Tropomiosina/genéticaRESUMO
Helicobacter pylori antigen was prepared from an isolate from a patient with a duodenal ulcer. Serum samples were obtained from culture-positive H. pylori infected patients with duodenal ulcers, gastric ulcers and gastritis (n=30). As controls, three kinds of sera without detectable H. pylori IgG antibodies were used: 30 from healthy individuals without history of gastric disorders, 30 from patients who were seen in the endoscopy clinic but were H. pylori culture negative and 30 from people with other diseases. OFF-GEL electrophoresis, SDS-PAGE and Western blots of individual serum samples were used to identify protein bands with good sensitivity and specificity when probed with the above sera and HRP-conjugated anti-human IgG. Four H. pylori protein bands showed good (≥ 70%) sensitivity and high specificity (98-100%) towards anti-Helicobacter IgG antibody in culture- positive patients sera and control sera, respectively. The identities of the antigenic proteins were elucidated by mass spectrometry. The relative molecular weights and the identities of the proteins, based on MALDI TOF/ TOF, were as follows: CagI (25 kDa), urease G accessory protein (25 kDa), UreB (63 kDa) and proline/pyrroline- 5-carboxylate dehydrogenase (118 KDa). These identified proteins, singly and/or in combinations, may be useful for diagnosis of H. pylori infection in patients.