Hyperpolarizing DNA Nucleobases via NMR Signal Amplification by Reversible Exchange.

The present work investigates the potential for enhancing the NMR signals of DNA nucleobases by parahydrogen-based hyperpolarization. Signal amplification by reversible exchange (SABRE) and SABRE in Shield Enables Alignment Transfer to Heteronuclei (SABRE-SHEATH) of selected DNA nucleobases is demonstrated with the enhancement (ε) of 1H, 15N, and/or 13C spins in 3-methyladenine, cytosine, and 6-O-guanine. Solutions of the standard SABRE homogenous catalyst Ir(1,5-cyclooctadeine)(1,3-bis(2,4,6-trimethylphenyl)imidazolium)Cl ("IrIMes") and a given nucleobase in deuterated ethanol/water solutions yielded low 1H ε values (≤10), likely reflecting weak catalyst binding. However, we achieved natural-abundance enhancement of 15N signals for 3-methyladenine of ~3300 and ~1900 for the imidazole ring nitrogen atoms. 1H and 15N 3-methyladenine studies revealed that methylation of adenine affords preferential binding of the imidazole ring over the pyrimidine ring. Interestingly, signal enhancements (ε~240) of both 15N atoms for doubly labelled cytosine reveal the preferential binding of specific tautomer(s), thus giving insight into the matching of polarization-transfer and tautomerization time scales. 13C enhancements of up to nearly 50-fold were also obtained for this cytosine isotopomer. These efforts may enable the future investigation of processes underlying cellular function and/or dysfunction, including how DNA nucleobase tautomerization influences mismatching in base-pairing.

Batch-Mode Clinical-Scale Optical Hyperpolarization of Xenon-129 Using an Aluminum Jacket with Rapid Temperature Ramping.

We present spin-exchange optical pumping (SEOP) using a third-generation (GEN-3) automated batch-mode clinical-scale 129Xe hyperpolarizer utilizing continuous high-power (∼170 W) pump laser irradiation and a novel aluminum jacket design for rapid temperature ramping of xenon-rich gas mixtures (up to 2 atm partial pressure). The aluminum jacket design is capable of heating SEOP cells from ambient temperature (typically 25 °C) to 70 °C (temperature of the SEOP process) in 4 min, and perform cooling of the cell to the temperature at which the hyperpolarized gas mixture can be released from the hyperpolarizer (with negligible amounts of Rb metal leaving the cell) in approximately 4 min, substantially faster (by a factor of 6) than previous hyperpolarizer designs relying on air heat exchange. These reductions in temperature cycling time will likely be highly advantageous for the overall increase of production rates of batch-mode (i.e., stopped-flow) 129Xe hyperpolarizers, which is particularly beneficial for clinical applications. The additional advantage of the presented design is significantly improved thermal management of the SEOP cell. Accompanying the heating jacket design and performance, we also evaluate the repeatability of SEOP experiments conducted using this new architecture, and present typically achievable hyperpolarization levels exceeding 40% at exponential build-up rates on the order of 0.1 min-1.

A versatile synthetic route to the preparation of 15 N heterocycles.

A robust medium-scale (approximately 3 g) synthetic method for 15 N labeling of pyridine (15 N-Py) is reported based on the Zincke reaction. 15 N enrichment in excess of 81% was achieved with approximately 33% yield. 15 N-Py serves as a standard substrate in a wide range of studies employing a hyperpolarization technique for efficient polarization transfer from parahydrogen to heteronuclei; this technique, called SABRE (signal amplification by reversible exchange), employs a simultaneous chemical exchange of parahydrogen and a to-be-hyperpolarized substrate (e.g., pyridine) on metal centers. In studies aimed at the development of hyperpolarized contrast agents for in vivo molecular imaging, pyridine is often employed either as a model substrate (for hyperpolarization technique development, quality assurance, and phantom imaging studies) or as a co-substrate to facilitate more efficient hyperpolarization of a wide range of emerging contrast agents (e.g., nicotinamide). Here, the produced 15 N-Py was used for the feasibility study of spontaneous 15 N hyperpolarization at high magnetic (HF) fields (7 T and 9.4 T) of an NMR spectrometer and an MRI scanner. SABRE hyperpolarization enabled acquisition of 2D MRI imaging of catalyst-bound 15 N-pyridine with 75 × 75 mm2 field of view (FOV), 32 × 32 matrix size, demonstrating the feasibility of 15 N HF-SABRE molecular imaging with 2.4 × 2.4 mm2 spatial resolution.

Toward Cleavable Metabolic/pH Sensing "Double Agents" Hyperpolarized by NMR Signal Amplification by Reversible Exchange.

We show the simultaneous generation of hyperpolarized 13 C-labeled acetate and 15 N-labeled imidazole following spin-relay of hyperpolarization and hydrolysis of the acetyl moiety on 1-13 C-15 N2 -acetylimidazole. Using SABRE-SHEATH (Signal Amplification by Reversible Exchange in SHield Enables Alignment Transfer to Heteronuclei), transfer of spin order occurs from parahydrogen to acetylimidazole 15 N atoms and the acetyl 13 C site (≈263-fold enhancement), giving rise to relatively long hyperpolarization lifetimes at 0.3 T (T1 ≈52 s and ≈149 s for 13 C and 15 N, respectively). Immediately following polarization transfer, the 13 C-labeled acetyl group is hydrolytically cleaved to produce hyperpolarized 13 C-acetate/acetic acid (≈140-fold enhancement) and 15 N-imidazole (≈180-fold enhancement), the former with a 13 C T1 of ≈14 s at 0.3 T. Straightforward synthetic routes, efficient spin-relay of SABRE hyperpolarization, and facile bond cleavage open a door to the cheap and rapid generation of long-lived hyperpolarized states within a wide range of molecular targets, including biologically relevant carboxylic acid derivatives, for metabolic and pH imaging.

Parahydrogen-Based Hyperpolarization for Biomedicine.

Magnetic resonance (MR) is one of the most versatile and useful physical effects used for human imaging, chemical analysis, and the elucidation of molecular structures. However, its full potential is rarely used, because only a small fraction of the nuclear spin ensemble is polarized, that is, aligned with the applied static magnetic field. Hyperpolarization methods seek other means to increase the polarization and thus the MR signal. A unique source of pure spin order is the entangled singlet spin state of dihydrogen, parahydrogen (pH2 ), which is inherently stable and long-lived. When brought into contact with another molecule, this "spin order on demand" allows the MR signal to be enhanced by several orders of magnitude. Considerable progress has been made in the past decade in the area of pH2 -based hyperpolarization techniques for biomedical applications. It is the goal of this Review to provide a selective overview of these developments, covering the areas of spin physics, catalysis, instrumentation, preparation of the contrast agents, and applications.

Dramatic improvement in the "Bulk" hyperpolarization of 131Xe via spin exchange optical pumping probed using in situ low-field NMR.

We report on hyperpolarization of quadrupolar (I=3/2) 131Xe via spin-exchange optical pumping. Observations of the 131Xe polarization dynamics via in situ low-field NMR show that the estimated alkali-metal/131Xe spin-exchange rates can be large enough to compete with 131Xe spin relaxation. 131Xe polarization up to 7.6±1.5% was achieved in ∼8.5×1020 spins-a ∼100-fold improvement in the total spin angular momentum-potentially enabling various applications, including: measurement of spin-dependent neutron-131Xe s-wave scattering; sensitive searches for time-reversal violation in neutron-131Xe interactions beyond the Standard Model; and surface-sensitive pulmonary MRI.

Six-coordinate nitrosyl and nitro complexes of meso-tetratolylporphyrinatocobalt with trans sulfur-donor ligands.

By Fourier transform infrared and optical spectroscopy, it has been observed that interactions of dimethyl sulfide and tetrahydrothiophene with nitrosyl and nitro complexes of meso-tetra-p-tolylporphyrinatocobalt [Co(TTP)] lead to the formation of previously unknown six-coordinate species. Nitrosyl complexes of the general formula (S-donor)Co(TTP)(NO) are thermally unstable and can be seen only at low temperatures both in the solid state and in solution. The nitro complexes (S-donor)Co(TTP)(NO(2)) are fairly stable at room temperature in the solid state but partly decompose upon dissolution. The binding constants for these complexation reactions were determined. In contrast to the solid-state iron nitritoporphyrin complexes, oxo-transfer reactions from the coordinated nitro group of Co(TTP)(NO(2)) to the S donors, resulting in oxidation of these sulfides and the formation of Co(TTP)(NO), were not observed.

XeUS: A second-generation automated open-source batch-mode clinical-scale hyperpolarizer.

We present a second-generation open-source automated batch-mode 129Xe hyperpolarizer (XeUS GEN-2), designed for clinical-scale hyperpolarized (HP) 129Xe production via spin-exchange optical pumping (SEOP) in the regimes of high Xe density (0.66-2.5 atm partial pressure) and resonant photon flux (~170 W, Δλ = 0.154 nm FWHM), without the need for cryo-collection typically employed by continuous-flow hyperpolarizers. An Arduino micro-controller was used for hyperpolarizer operation. Processing open-source software was employed to program a custom graphical user interface (GUI), capable of remote automation. The Arduino Integrated Development Environment (IDE) was used to design a variety of customized automation sequences such as temperature ramping, NMR signal acquisition, and SEOP cell refilling for increased reliability. A polycarbonate 3D-printed oven equipped with a thermo-electric cooler/heater provides thermal stability for SEOP for both binary (Xe/N2) and ternary (4He-containing) SEOP cell gas mixtures. Quantitative studies of the 129Xe hyperpolarization process demonstrate that near-unity polarization can be achieved in a 0.5 L SEOP cell. For example, %PXe of 93.2 ± 2.9% is achieved at 0.66 atm Xe pressure with polarization build-up rate constant γSEOP = 0.040 ± 0.005 min-1, giving a max dose equivalent ≈ 0.11 L/h 100% hyperpolarized, 100% enriched 129Xe; %PXe of 72.6 ± 1.4% is achieved at 1.75 atm Xe pressure with γSEOP of 0.041 ± 0.001 min-1, yielding a corresponding max dose equivalent of 0.27 L/h. Quality assurance studies on this device have demonstrated the potential to refill SEOP cells hundreds of times without significant losses in performance, with average %PXe = 71.7%, (standard deviation σP = 1.52%) and mean polarization lifetime T1 = 90.5 min, (standard deviation σT = 10.3 min) over the first ~200 gas mixture refills, with sufficient performance maintained across a further ~700 refills. These findings highlight numerous technological developments and have significant translational relevance for efficient production of gaseous HP 129Xe contrast agents for use in clinical imaging and bio-sensing techniques.

Facile Removal of Homogeneous SABRE Catalysts for Purifying Hyperpolarized Metronidazole, a Potential Hypoxia Sensor.

We report a simple and effective method to remove IrIMes homogeneous polarization transfer catalysts from solutions where NMR Signal Amplification By Reversible Exchange (SABRE) has been performed, while leaving intact the substrate's hyperpolarized state. Following microTesla SABRE hyperpolarization of 15N spins in metronidazole, addition of SiO2 microparticles functionalized with 3-mercaptopropyl or 2-mercaptoethyl ethyl sulfide moieties provides removal of the catalyst from solution well within the hyperpolarization decay time at 0.3 T (T 1>3 mins)-and enabling transfer to 9.4 T for detection of enhanced 15N signals in the absence of catalyst within the NMR-detection region. Successful catalyst removal from solution is supported by the inability to "re-hyperpolarize" 15N spins in subsequent attempts, as well as by 1H NMR and ICP-MS. Record-high 15N nuclear polarization of up to ~34% was achieved, corresponding to >100,000-fold enhancement at 9.4 T, and approximately 5/6th of the 15N hyperpolarization is retained after ~20-second-long purification procedure. Taken together, these results help pave the way for future studies involving in vivo molecular imaging using agents hyperpolarized via rapid and inexpensive parahydrogen-based methods.

Imaging of Biomolecular NMR Signals Amplified by Reversible Exchange with Parahydrogen Inside an MRI Scanner.

The Signal Amplification by Reversible Exchange (SABRE) technique employs exchange with singlet-state parahydrogen to efficiently generate high levels of nuclear spin polarization. Spontaneous SABRE has been shown previously to be efficient in the milli-Tesla and micro-Tesla regimes. We have recently demonstrated that high-field SABRE is also possible, where proton sites of molecules that are able to reversibly coordinate to a metal center can be hyperpolarized directly within high-field magnets, potentially offering the convenience of in situ hyperpolarization-based spectroscopy and imaging without sample shuttling. Here, we show efficient polarization transfer from parahydrogen (para-H2) to the 15N atoms of imidazole-15N2 and nicotinamide-15N achieved via high-field SABRE (HF-SABRE). Spontaneous transfer of spin order from the para-H2 protons to 15N atoms at the high magnetic field of an MRI scanner allows one not only to record enhanced 15N NMR spectra of in situ hyperpolarized biomolecules, but also to perform imaging using conventional MRI sequences. 2D 15N MRI of high-field SABRE-hyperpolarized imidazole with spatial resolution of 0.3×0.3 mm2 at 9.4 T magnetic field and a high signal-to-noise ratio (SNR) of ~99 was demonstrated. We show that 1H MRI of in situ HF-SABRE hyperpolarized biomolecules (e.g. imidazole-15N2) is also feasible. Taken together, these results show that heteronuclear (15N) and 1H spectroscopic detection and imaging of high-field-SABRE-hyperpolarized molecules are promising tools for a number of emerging applications.

Cation and anion transport in a dicationic imidazolium-based plastic crystal ion conductor.

Here we investigate the organic ionic plastic crystal 1,2-bis[N-(N'-hexylimidazolium-d2(4,5))]ethane 2PF6(-) in one of its solid plastic crystal phases by means of multinuclear solid-state (SS) NMR and pulsed-field-gradient NMR diffusometry. We quantify distinct cation and anion diffusion coefficients as well as the Arrhenius diffusion activation energies (Ea) in this dicationic imidazolium-based plastic crystal. Our studies suggest a change in transport mechanism for the cation upon varying thermal and magnetic treatment (9.4 T), evidenced by differences in cation and anion Ea. Moreover, variable temperature (2)H SSNMR line shapes support a change in local molecular environment upon slow cooling in B0. We quantify the percentage of mobile anions as a function of temperature with (19)F SSNMR, wherein two distinct spectral features are present. We also comment on the Arrhenius pre-exponential factor for diffusion (D0), giving insight into the number of degrees of freedom for transport for both cation and anion as a function of thermal treatment. Given the breadth and depth of our measurements, we propose that bulk ion transport is dominated by anion diffusion in ionic-liquid-like domain boundaries separating crystallites. This study elucidates fundamental properties of this plastic crystal, and allows for a more general and deeper understanding of ion transport within such materials.

Humidity-modulated phase control and nanoscopic transport in supramolecular assemblies.

Supramolecular assembly allows for enhanced control of bulk material properties through the fine modulation of intermolecular interactions. We present a comprehensive study of a cross-linkable amphiphilic wedge molecule based on a sulfonated trialkoxybenzene with a sodium counterion that forms liquid crystalline (LC) phases with ionic nanochannel structures. This compound exhibits drastic structural changes as a function of relative humidity (RH). Our combined structural, dynamical, and transport studies reveal deep and novel information on the coupling of water and wedge molecule transport to structural motifs, including the significant influence of domain boundaries within the material. Over a range of RH values, we employ (23)Na solid-state NMR on the counterions to complement detailed structural studies by grazing-incidence small-angle X-ray scattering. RH-dependent pulsed-field-gradient (PFG) NMR diffusion studies on both water and the wedge amphiphiles show multiple components, corresponding to species diffusing within LC domains as well as in the domain boundaries that compose 10% of the material. The rich transport and dynamical behaviors described here represent an important window into the world of supramolecular soft materials, carrying implications for optimization of these materials in many venues. Cubic phases present at high RH show fast transport of water (2 × 10(-10) m(2)/s), competitive with that observed in benchmark polymeric ion conductors. Understanding the self-assembly of these supramolecular building blocks shows promise for generating cross-linked membranes with fast ion conduction for applications such as next-generation batteries.

Unraveling the local energetics of transport in a polymer ion conductor.

We compare diffusion activation energy measurements in a hydrated perfluorosulfonate ionomer and aqueous solutions of triflic acid. These measurements provide insight into water transport dynamics on sub-nm length scales, and gauge the contribution of the polymer sidechain terminal group. Future membrane materials design will hinge on detailed understanding of transport dynamics.