RESUMO
Twist angle between two-dimensional layers is a critical parameter that determines their interfacial properties, such as moiré excitons and interfacial ferro-electricity. To achieve better control over these properties for fundamental studies and various applications, considerable efforts have been made to manipulate twist angle. However, due to mechanical limitations and the inevitable formation of incommensurate regions, there remains a challenge in attaining perfect alignment of crystalline orientation. Here we report a thermally induced atomic reconstruction of randomly stacked transition metal dichalcogenide multilayers into fully commensurate heterostructures with zero twist angle by encapsulation annealing, regardless of twist angles of as-stacked samples and lattice mismatches. We also demonstrate the selective formation of R- and H-type fully commensurate phases with a seamless lateral junction using chemical vapour-deposited transition metal dichalcogenides. The resulting fully commensurate phases exhibit strong photoluminescence enhancement of the interlayer excitons, even at room temperature, due to their commensurate structure with aligned momentum coordinates. Our work not only demonstrates a way to fabricate zero-twisted, two-dimensional bilayers with R- and H-type configurations, but also provides a platform for studying their unexplored properties.
RESUMO
Moiré superlattices formed by stacking two-dimensional crystals have reinvigorated the pursuit for emergent functionalities of engineered superlattices. Unique optical characteristics can be realized from the interplay between the electronic excitations and the atomic rearrangements owing to their intrinsic softness. Although large-scale reconstructions have been identified at small twist angles, they have been treated as being rigid at large twist angles. Here, we report that moiré superlattices made from single layers of MoS2 and WSe2 exhibit a pair of torsional strains with opposite chirality irrespective of the twist angle. The whirlpool-shaped periodic lattice distortions introduce fuzziness in the Raman spectra and universal redshifts to the intralayer excitons for all twist angles. We show that both of these modulations become weaker as the twist angle increases but do not disappear, whereas they are turned off when the constituent layers are not tightly coupled, thus establishing an essential structure-property relationship for moiré superlattices.
RESUMO
Elemental phosphorus exhibits fascinating structural varieties and versatile properties. The unique nature of phosphorus bonds can lead to the formation of extremely complex structures, and detailed structural information on some phosphorus polymorphs is yet to be investigated. In this study, we investigated an unidentified crystalline phase of phosphorus, type-II red phosphorus (RP), by combining state-of-the-art structural characterization techniques. Electron diffraction tomography, atomic-resolution scanning transmission electron microscopy (STEM), powder X-ray diffraction, and Raman spectroscopy were concurrently used to elucidate the hidden structural motifs and their packing in type-II RP. Electron diffraction tomography, performed using individual crystalline nanowires, was used to identify a triclinic unit cell with volume of 5330â Å3 , which is the largest unit cell for elemental phosphorus crystals up to now and contains approximately 250 phosphorus atoms. Atomic-resolution STEM imaging, which was performed along different crystal-zone axes, confirmed that the twisted wavy tubular motif is the basic building block of type-II RP. Our study discovered and presented a new variation of building blocks in phosphorus, and it provides insights to clarify the complexities observed in phosphorus as well as other relevant systems.
RESUMO
Structural imperfections can cause both beneficial and detrimental consequences on the excitonic characteristics of transition metal dichalcogenides (TMDs). Regarding valley selection, structural defects typically promote valley depolarization in monolayer TMDs, but defect healing via an additional growth process can restore valley polarization in vertical heterobilayers (VHs). In this study, we analyzed the valley polarization of center-nucleated and edge-nucleated VHs (WS2/MoS2) grown using a controlled growth process and discovered that defect-related photoluminescence (PL) is strongly suppressed in the center-nucleated VHs due to defect healing. Additionally, we demonstrated that the valley polarization of lower-lying intralayer excitons is more sensitive to the defect density of the sample than to higher-lying intralayer excitons. Despite defect healing in the center-nucleated VHs, the temperature-dependent PL study indicated that valley depolarization of the lower-lying intralayer excitons becomes significant below 100 K because of stronger hybridization of defect states. Also, we conducted a comprehensive study on the excitation intensity dependence to investigate the electron-doping-induced Auger recombination mechanism, which also contributes to valley depolarization of intralayer excitons via regeneration of intervalley trions. Our findings provide valuable insight into the development of VH-based valleytronic devices.
RESUMO
van der Waals (vdW) epitaxy can be used to grow epilayers with different symmetries on graphene, thereby imparting unprecedented properties in graphene owing to formation of anisotropic superlattices and strong interlayer interactions. Here, we report in-plane anisotropy in graphene by vdW epitaxially grown molybdenum trioxide layers with an elongated superlattice. The grown molybdenum trioxide layers led to high p-doping of the underlying graphene up to p = 1.94 × 1013 cm-2 regardless of the thickness of molybdenum trioxide, maintaining a high carrier mobility of 8155 cm2 V-1 s-1. Molybdenum trioxide-induced compressive strain in graphene increased up to -0.6% with increasing molybdenum trioxide thickness. The asymmetrical band distortion of molybdenum trioxide-deposited graphene at the Fermi level led to in-plane electrical anisotropy with a high conductance ratio of 1.43 owing to the strong interlayer interaction of molybdenum trioxide-graphene. Our study presents a symmetry engineering method to induce anisotropy in symmetric two-dimensional (2D) materials via the formation of asymmetric superlattices with epitaxially grown 2D layers.
RESUMO
Noncentrosymmetric transition-metal dichalcogenides, particularly their 3R polymorphs, provide a robust setting for valleytronics. Here, we report on the selective growth of monolayers and bilayers of MoS2, which were acquired from two closely but differently oriented substrates in a chemical vapor deposition reactor. It turns out that as-grown bilayers are predominantly 3R-type, not more common 2H-type, as verified by microscopic and spectroscopic characterization. As expected, the 3R bilayer showed a significantly higher valley polarization compared with the centrosymmetric 2H bilayer, which undergoes efficient interlayer scattering across contrasting valleys because of their vertical alignment of the K and K' points in momentum space. Interestingly, the 3R bilayer showed even higher valley polarization compared with the monolayer counterpart. Moreover, the 3R bilayer reasonably maintained its valley efficiency over a very wide range of excitation power density from â¼0.16 kW/cm2 to â¼0.16 MW/cm2 at both low and room temperatures. These observations are rather surprising because valley dephasing could be more efficient in the bilayer via both interlayer and intralayer scatterings, whereas only intralayer scattering is allowed in the monolayer. The improved valley polarization of the 3R bilayer can be attributed to its indirect-gap nature, where valley-polarized excitons can relax into the valley-insensitive band edge, which otherwise scatter into the contrasting valley to effectively cancel out the initial valley polarization. Our results provide a facile route for the growth of 3R-MoS2 bilayers that could be utilized as a platform for advancing valleytronics.
RESUMO
Raman spectroscopy has been established as one of the core experimental tools to study two-dimensional materials (2DMs) including graphene, black phosphorus, transitional metal chalcogenides, and other layered materials. If the polarization of the incident photons and the scattered photons are carefully controlled, the selection rules for the Raman scattering from phonon modes allow accurate mode assignments, which is not always possible in Raman scattering measurements using unpolarized light. Furthermore, polarized Raman spectroscopy can be used to determine the crystallographic orientation of isotropic 2DMs with in-plane strain or anisotropic 2DMs. This review explains the basics of polarized Raman spectroscopy, especially in the context of 2DMs research, and survey some of the most important applications of polarized Raman spectroscopy in isotropic and anisotropic 2DMs studies.
RESUMO
Correction for 'Anomalous polarization dependence of Raman scattering and crystallographic orientation of black phosphorus' by Jungcheol Kim et al., Nanoscale, 2015, 7, 18708-18715, DOI: 10.1039/C5NR04349B.
RESUMO
Noncentrosymmetric monolayers (MLs) of transition metal dichalcogenides (TMDCs) and their 3R-type vertical stacks provide an ideal platform for studying atomic-scale nonlinear light-matter interaction in terms of second harmonic generation (SHG). Unlike the case of MLs, SHG from artificial stacks can be nontrivially affected by interlayer coupling and band offset between the constituent MLs, where the latter occurs for band-gap-engineered vertical heterostructures (VHs). In order to study these effects, we produced different sets of 3R-type homobilayers (homo-BLs) and heterobilayers (hetero-BLs) composed of MoS2 and its ternary alloy MoS2(1-x)Se2x. We first investigated the impact of interlayer coupling on the SHG response across the A- and B-exciton resonances in the MoS2 homo-BLs. The coupling strength was varied by preparing (i) decoupled BLs (SiO2 intercalated), (ii) weakly coupled BLs (dry transferred), and (iii) strongly coupled BLs (postannealed) and monitored by photoluminescence, Raman, and reflectance difference spectroscopy, and atomic force microscopy. Unlike the decoupled BL, SHG in the coupled BLs cannot be explained by the simple square law in thickness due to coupling-induced band modification. The impact of exciton-resonance offset on SHG was also investigated in the hetero-BLs by controlling the Se concentration in MoS2xSe2(x-1). Although these VHs can significantly broaden the spectral range for efficient SHG by vertically superposing distinct resonances of the constituent MLs, coherent reinforcement of SHG cannot be achieved basically because of the π/2 phase difference between the on-resonance SHG field in one ML and the off-resonance SHG field in the other ML. Upon postannealing, however, the overlapping resonance regime exhibited unexpectedly high SHG enhancement. This may arise from the formation of the strong resonance when the VHs approach ideal 3R-type hetero-BLs. Our approach may be utilized for fully exploiting the TMDC VHs for highly efficient broadband SHG applications.
RESUMO
Lattice matching has been supposed to play an important role in the coupling between two materials in a vertical heterostructure (HS). To investigate this role, we fabricated a heterojunction device with a few layers of p-type WSe2 and n-type MoSe2 with different crystal orientation angles. The crystal orientations of WSe2 and MoSe2 were estimated using high-resolution X-ray diffraction. Heterojunction devices were fabricated with twist angles of 0, 15, and 30°. The I- V curve of the sample with the twist angle of 0° under the dark condition showed a diodelike behavior. The strong coupling due to lattice matching caused a well-established p-n junction. In cases of 15 and 30° samples, the van der Waals gap was built because of lattice mismatching, which resulted in the formation of a potential barrier. However, when the light-emitting diode light of 365 nm (3.4 eV) was illuminated, it was possible for excited electrons and holes to jump beyond the potential barrier and the current flowed well in both forward and reverse directions. The effects of the twist angle were analyzed by spectral responsivity and external quantum efficiency, where it was found that the untwisted HS exhibited higher sensitivity under IR illumination, whereas the twisting effect was not noticeable under UV illumination. From photoluminescence and Raman spectroscopy studies, it was confirmed that the twisted HS showed a weak coupling because of the lattice mismatch.
RESUMO
We investigated polarization dependence of the Raman modes in black phosphorus (BP) using five different excitation wavelengths. The crystallographic orientation was determined by comparing polarized optical microscopy with high-resolution transmission electron microscopy analysis. In polarized Raman spectroscopy, the B2g mode shows the same polarization dependence regardless of the excitation wavelength or the sample thickness. On the other hand, the Ag(1) and Ag(2) modes show a peculiar polarization behavior that depends on the excitation wavelength and the sample thickness. The thickness dependence can be explained by considering the anisotropic interference effect due to the birefringence and dichroism of the BP crystal, but the wavelength dependence cannot be explained. We propose a simple and fail-proof procedure to determine the orientation of a BP crystal by combining polarized Raman scattering with polarized optical microscopy.