RESUMO
BACKGROUND: Hypoxic-ischemic brain injury (HIBI) is a common complication of out-of-hospital cardiac arrest (OHCA). OBJECTIVES: We investigated whether grey-to-white matter ratio (GWR) values, measured using early head computed tomography (HCT), were associated with neurologic outcomes based on the severity of HIBI in survivors of OHCA. METHODS: This retrospective multicenter study included adult comatose OHCA survivors who underwent an HCT scan within 2 h after the return of spontaneous circulation. HIBI severity was assessed using the revised post-Cardiac Arrest Syndrome for Therapeutic hypothermia (rCAST) scale (low, moderate, and severe). Poor neurologic outcomes were defined as Cerebral Performance Categories 3 to 5 at 6 months after OHCA. RESULTS: Among 354 patients, 27% were women and 224 (63.3%) had poor neurologic outcomes. The distribution of severity was 19.5% low, 47.5% moderate, and 33.1% severe. The area under the receiver operating curves of the GWR values for predicting rCAST severity (low, moderate, and severe) were 0.52, 0.62, and 0.79, respectively. The severe group had significantly higher predictive performance than the moderate group (p = 0.02). Multivariate logistic regression analysis revealed a significant association between GWR values and poor neurologic outcomes in the moderate group (adjusted odds ratio = 0.012, 95% CI 0.0-0.54, p = 0.02). CONCLUSIONS: In this cohort study, GWR values measured using early HCT demonstrated variations in predicting neurologic outcomes based on HIBI severity. Furthermore, GWR in the moderate group was associated with poor neurologic outcomes.
Assuntos
Hipóxia-Isquemia Encefálica , Parada Cardíaca Extra-Hospitalar , Tomografia Computadorizada por Raios X , Substância Branca , Humanos , Parada Cardíaca Extra-Hospitalar/complicações , Parada Cardíaca Extra-Hospitalar/etiologia , Feminino , Masculino , Estudos Retrospectivos , Pessoa de Meia-Idade , Idoso , Hipóxia-Isquemia Encefálica/complicações , Hipóxia-Isquemia Encefálica/fisiopatologia , Tomografia Computadorizada por Raios X/métodos , Substância Branca/diagnóstico por imagem , Substância Cinzenta/diagnóstico por imagem , Sobreviventes/estatística & dados numéricos , Adulto , Valor Preditivo dos TestesRESUMO
There is currently an ongoing debate about the 'grey area' of heart failure with mid-range ejection fraction (HFmrEF). We evaluated characteristics, prognosis, and the effect of ß-blockers on clinical outcomes in patients with HFmrEF after acute myocardial infarction (AMI). We included a total of 10,785 patients and divided them into three groups: EF 40-49% (HFmrEF; n = 2717; reference); EF < 40% (reduced EF [HFrEF]; n = 1194); and EF ≥ 50% (preserved EF [HFpEF]; n = 6874). The primary outcome was 2-year all-cause mortality. HFmrEF was intermediate between HFrEF and HFpEF for baseline characteristics. The risk of all-cause mortality was lower for HFmrEF patients compared to HFrEF patients (adjusted hazard ratio [HR] 0.710; 95% confidence interval [CI] 0.544-0.927; P = 0.012). However, HFmrEF patients tended to be at higher risk for 2-year all-cause mortality than HFpEF patients (adjusted HR 1.235; 95% CI 0.989-1.511; P = 0.090). ß-blockers were associated with reductions in all-cause mortality for the entire cohort (adjusted HR 0.760; 95% CI 0.592-0.975; P = 0.031). ß-blockers were effective in patients with HFrEF (adjusted HR 0.667; 95% CI 0.471-0.944; P = 0.022), tended to be effective in patients with HFmrEF (adjusted HR 0.665; 95% CI 0.426-1.038; P = 0.072), but not effective in patients with HFpEF (adjusted HR 0.852; 95% CI 0.548-1.326; P = 0.478; interaction P = 0.026). In conclusion, clinical profiles and prognosis of patients with post-AMI HFmrEF are largely intermediate between HFrEF and HFpEF. ß-blockers reduced or tended to reduce 2-year all-cause mortality in patients with HFrEF or HFmrEF, respectively, but not those with HFpEF after AMI.
Assuntos
Insuficiência Cardíaca , Infarto do Miocárdio , Insuficiência Cardíaca/tratamento farmacológico , Hospitalização , Humanos , Infarto do Miocárdio/tratamento farmacológico , Prognóstico , Sistema de Registros , Fatores de Risco , Volume SistólicoRESUMO
BACKGROUND: Although brachial-ankle pulse wave velocity (baPWV) is well-known for predicting the cardiovascular mortality and morbidity, its anticipated value is not demonstrated well concerning acute stroke. METHODS: Total 1557 patients with acute stroke who performed baPWV were enrolled. We evaluated the prognostic value of baPWV predicting all-cause death and vascular death in patients with acute stroke Results: Highest quartile of baPWV was ≥23.64 m/s. All-caused deaths (including vascular death; 71) were 109 patients during follow-up periods (median 905 days). Multivariate Cox regression analysis revealed that patients with the highest quartile of baPWV had higher risk for vascular death when they are compared with patients with all other three quartiles of baPWV (Hazard ratio with 95% confidence interval [CI] 1.879 [1.022-3.456], p = .042 for vascular death). CONCLUSION: High baPWV was a strong prognostic value of vascular death in patients with acute stroke.
Assuntos
Índice Tornozelo-Braço/métodos , Análise de Onda de Pulso/métodos , Acidente Vascular Cerebral/diagnóstico , Idoso , Feminino , Humanos , Masculino , Prognóstico , Acidente Vascular Cerebral/mortalidadeRESUMO
Obesity and metabolic syndrome is a worldwide pandemic and associated with high cardiovascular risk. Metabolic endotoxemia (ME) is thought to be an underlying molecular mechanism. It triggers toll-like receptor 4-mediated inflammatory adipokines and causes a chronic low grade inflammatory status, which results in cardiovascular risk increase. Exercise is the best nonpharmacological treatment to improve prognosis. In this study, we examined the circulating endotoxin level in Korean obese women and investigated effects of exercise on it. Women over body mass index (BMI) 25 kg/m² participated in a resistance training exercise, Curves. At baseline and after 12 weeks exercise, tests including blood samples were taken. In Korean obese women, the fasting endotoxin was 1.45 ± 0.11 EU/mL. Ingestion of a high calorie meal led to a peak level after 2 hours (postprandial 2 hours [PP2]) and a significant rise over the 4 hours (postprandial 4 hours [PP4]) in it (1.78 ± 0.15 and 1.75 ± 0.14 EU/mL for PP2 and PP4, P < 0.05 vs. fasting). After exercise, BMI and hip circumference were reduced significantly. The total cholesterol (TC) at fasting, PP2 and PP4 were decreased significantly. All levels of circulating endotoxin at fasting, PP2 and PP4 showed reduction. But, the peak change was only significant (baseline vs. 12 weeks for PP2; 1.78 ± 0.15 vs. 1.48 ± 0.06 EU/mL, P < 0.05). We report the circulating endotoxin level in Korean obese women for the first time. Also, we establish that energy intake leads to endotoxemia and exercise suppresses the peak endotoxemia after meal. It suggests an impact for a better prognosis in obese women who follow regular exercise.
Assuntos
Endotoxemia/diagnóstico , Exercício Físico , Obesidade/diagnóstico , Adulto , Povo Asiático , Glicemia/análise , Índice de Massa Corporal , HDL-Colesterol/sangue , LDL-Colesterol/sangue , Endotoxemia/complicações , Endotoxinas/sangue , Ingestão de Energia , Feminino , Humanos , Pessoa de Meia-Idade , Obesidade/complicações , Prognóstico , República da Coreia , Fatores de Risco , Triglicerídeos/sangue , Circunferência da Cintura , Adulto JovemRESUMO
OBJECTIVE: The aim of this study was to evaluate the combined effects of mineral trioxide aggregate (MTA) and human placental extract (HPE) on cell growth, differentiation and in vitro angiogenesis of human dental pulp cells (HDPCs) and to identify underlying signal transduction mechanisms. In vivo dental pulp responses in rats for a pulp-capping agent were examined. MATERIALS AND METHODS: MTS assay. ALP activity test, alizarin red S staining and RT-PCR for marker genes were carried out to evaluate cell growth and differentiation. HUVEC migration, mRNA expression and capillary tube formation were measured to evaluate angiogenesis. Signal transduction was analysed using Western blotting and confocal microscopy. The pulps of rat maxillary first molars were exposed and capped with either MTA or MTA plus HPE. Histologic observation and scoring were performed. RESULTS: Compared to treatment of HDPCs with either HPE or MTA alone, the combination of HPE and MTA increased cell growth, ALP activity, mineralized nodules and expression of marker mRNAs. Combination HPE and MTA increased migration, capillary tube formation and angiogenic gene expression compared with MTA alone. Activation of Akt, mammalian target of rapamycin (mTOR), p38, JNK and ERK MAPK, Akt, and NF-κB were significantly increased by combining HPE and MTA compared with MTA alone. Pulp capping with MTA plus HPE in rats showed superior dentin bridge formation, odontoblastic layers and dentinal tubules and lower inflammatory cell response, compared to the MTA alone group. CONCLUSIONS: This study demonstrates for the first time that the use of MTA with HPE promotes cell growth, differentiation and angiogenesis in HDPCs, which were associated with mTOR, MAPK and NF-κB pathways. Direct pulp capping with HPE plus MTA showed superior results when compared with MTA alone. Thus, the combination of MTA and HPE may be useful for regenerative endodontics.
Assuntos
Compostos de Alumínio/farmacologia , Compostos de Cálcio/farmacologia , Polpa Dentária/efeitos dos fármacos , Óxidos/farmacologia , Extratos Placentários/farmacologia , Silicatos/farmacologia , Fosfatase Alcalina/efeitos dos fármacos , Compostos de Alumínio/uso terapêutico , Animais , Calcificação Fisiológica/efeitos dos fármacos , Compostos de Cálcio/uso terapêutico , Capilares/efeitos dos fármacos , Diferenciação Celular/efeitos dos fármacos , Linhagem Celular , Movimento Celular/efeitos dos fármacos , Proliferação de Células/efeitos dos fármacos , Polpa Dentária/irrigação sanguínea , Polpa Dentária/citologia , Dentina Secundária/efeitos dos fármacos , Combinação de Medicamentos , Células Endoteliais da Veia Umbilical Humana/efeitos dos fármacos , Humanos , MAP Quinase Quinase 4/efeitos dos fármacos , Sistema de Sinalização das MAP Quinases/efeitos dos fármacos , Masculino , Proteínas Quinases Ativadas por Mitógeno/efeitos dos fármacos , NF-kappa B/efeitos dos fármacos , Neovascularização Fisiológica/efeitos dos fármacos , Odontoblastos/citologia , Odontoblastos/efeitos dos fármacos , Óxidos/uso terapêutico , Extratos Placentários/uso terapêutico , Proteínas Proto-Oncogênicas c-akt/efeitos dos fármacos , Agentes de Capeamento da Polpa Dentária e Pulpectomia/uso terapêutico , Ratos , Ratos Sprague-Dawley , Transdução de Sinais/efeitos dos fármacos , Silicatos/uso terapêutico , Serina-Treonina Quinases TOR/efeitos dos fármacos , Proteínas Quinases p38 Ativadas por Mitógeno/efeitos dos fármacosRESUMO
The development of high-filled 3D printing resin necessitates a bonding protocol for dental indirect restorations to achieve optimal bond strength after cementation. This study evaluates shear bond strengths of high-filler 3D printed materials for permanent restorations with various surface treatments. Rodin Sculpture 1.0 (50% lithium disilicate fillers) and 2.0 Ceramic Nanohybrid (>60% zirconia and lithium disilicate fillers) were tested, with Aelite All-Purpose Body composite resin as control. Samples were prepared, post-cured, and sandblasted with alumina (25 µm). Surface roughness was analyzed using an optical profilometer. Two bonding protocols were compared. First, groups were treated with lithium disilicate silane (Porcelain Primer) or zirconia primer (Z-Prime Plus) or left untreated without a bonding agent. Beam-shaped resin cement (DuoLink Universal) specimens were bonded and stored in a 37 °C water bath. Second, additional sets of materials were coated with a bonding agent (All-Bond Universal), either followed by silane application or left untreated. These sets were then similarly stored alongside resin cement specimens. Shear bond tests were performed after 24 h. SEM images were taken after debonding. One-Way ANOVA and post hoc Duncan were performed for the statistical analysis. Rodin 1.0 exhibited increased adhesive failure with silane or zirconia primer coating, but significantly improved bond strengths with bonding agent application. Rodin 2.0 showed consistent bond strengths regardless of bonding agent application, but cohesive failure rates increased with bonding agent and filler coating. In all groups, except for Rodin 1.0 without bonding agent, silane coating increased cohesive failure rate. In conclusion, optimal shear bond strength for high-filler 3D printing materials can be achieved with silane coating and bonding agent application.
RESUMO
OBJECTIVES: The purpose of this study was to find proper dentin substitute for standardized dentin barrier test and perform the cytotoxicity test of commercial bonding agents with the proper substitute. MATERIALS AND METHODS: The three-dimensional cells attached to dentin disc or millipore filters as the dentin substitute were tested in a dentin barrier test by perfusion. MTT assay was performed as an evaluation method for the cell survival rate. The cytotoxicity test of serial phenol dilution by bovine dentin disc was done to determine a standard toxic material, and the test of this proper phenol by using various millipore combinations was performed to find the suitable dentin substitute. Also, the cytotoxicity test of bonding agents was performed by this standardized substitute. The cell viability was expressed as percentages of untreated group. RESULTS: Phenol concentration of 0.05 % was selected as the standard toxic material. The different combinations of millipore filters--two sheets of 0.45 µm, two sheets of 0.22 µm, and the combination of 0.65, 0.45, and 0.22 µm--showed similar cytotoxicity to natural dentin discs by 0.05 % phenol (p > 0.05). The millipore combination of 0.65, 0.45, and 0.22 µm that had structural similarity to natural dentin discs was used as the substitute for cytotoxicity test of bonding agents. The toxic level of Adper Prompt L-Pop using the selected substitute was significantly the highest among four kinds of dentin bonding agents (p < 0.05). Also, the dentin barrier test by the substitute showed constant results compared with the one by the natural dentin disc. CONCLUSIONS: The millipore filter combination of 0.65, 0.45, and 0.22 µm could be used as the substitute for the cytotoxicity test of materials applied to dentin. CLINICAL RELEVANCE: Dentin barrier test by standardized substitutes would be helpful for considering the potential toxicity of dentin bonding agents prior to clinical adaptations and reducing the variations of natural bovine dentin that has individually different characteristics.
Assuntos
Adesivos Dentinários/toxicidade , Dentina/efeitos dos fármacos , Filtros Microporos , Animais , Bovinos , Adesão Celular/fisiologia , Técnicas de Cultura de Células , Linhagem Celular , Sobrevivência Celular/efeitos dos fármacos , Corantes , Permeabilidade da Dentina/efeitos dos fármacos , Cultura em Câmaras de Difusão , Fibroblastos/efeitos dos fármacos , Fibroblastos/fisiologia , Teste de Materiais/instrumentação , Teste de Materiais/métodos , Metacrilatos/toxicidade , Camundongos , Nylons/química , Perfusão , Fenol/toxicidade , Cimentos de Resina/toxicidade , Espectrofotometria , Propriedades de Superfície , Sais de Tetrazólio , Tiazóis , Alicerces Teciduais/químicaRESUMO
BACKGROUND: Restoring bonding composite to silver diamine fluoride (SDF)-treated enamel is challenging. This study investigates if phosphoric acid etch restores composite bond strength to SDF-treated enamel using universal adhesives. METHODS: Twenty-four recently extracted permanent teeth were randomly divided into 4 (2 experimental (SDF) and 2 control (CTR)) groups: SDF+Water: SDF (1 min) then water rinse (15 mL); CTR+Water: no treatment and water rinse (15 mL); SDF+Etch+Water: SDF (1 min), 35% phosphoric acid (40 s) then water rinse (15 mL); CTR+Etch+Water no treatment, 35% phosphoric acid (40 s) then water rinse (15 mL). The enamel surface in all the groups was bonded (All-Bond Universal) to 4-5 mm composite blocks (Z-250). Each sample was sectioned, and 6-8 beams (1 mm × 1 mm) were selected. The micro-tensile bond strength was measured by dividing the micro-tensile force peak by the adhesive surface area. Univariate ANOVA and Chi-square were used for between-group comparisons with p < 0.05. RESULTS: SDF+Water had significantly lower tensile strength compared to all the groups (p < 0.05). Although no difference was found in the tensile strength between the SDF+Etch+Water and the CTR+Etch+Water, the SDF+Etch+Water had significantly more adhesive failures compared to the CTR+Etch+Water (p = 0.047). CONCLUSIONS: While phosphoric acid etch seems to restore the initial composite bond strength to SDF-treated enamel, the long-term success of composite restorations bonded to SDF-treated enamel may need further investigation.
RESUMO
Epoxy resin-based sealers are commonly used for successful endodontic treatment. This study aimed to evaluate the cytotoxicity and genotoxicity of epoxy resin-based sealers under unset and set conditions. Three epoxy resin-based sealers were used: Adseal, AH Plus, and Dia-Proseal. To test cytotoxicity, an agar overlay test and a 3-[4,5-dimethylthiazol-2-yl]-2,5 diphenyl tetrazolium bromide (MTT) assay were performed using unset and set sealers on L929 mouse fibroblasts. The genotoxicity test of the comet assay was performed using the same cell line. Extract dilutions in the culture media were used as test materials for the MTT and comet assays. The comet tail produced by the damaged DNA was calculated by image analyses. Statistical analyses were performed using one-way analysis of variance and Tukey's post hoc test. Unset sealers did not show defined decolorized areas. Hardened specimens of resin-based sealers showed circular discolored zones in the agar overlay test. Dia-Proseal was the least cytotoxic after hardening. These results were confirmed in the MTT assay. Cell viability was significantly higher in cells treated with hardened sealers in both groups than that in cells treated with freshly mixed sealers in the MTT assay. Unset AH Plus® and Dia-Proseal™ significantly increased cell viability with decreasing dilution. Adseal™ was the least cytotoxic. Freshly mixed Adseal™ was more genotoxic when freshly mixed than when set. Unset epoxy resin-based sealers were generally more cytotoxic and genotoxic than set materials. Cytotoxicity does not always match the genotoxicity results; therefore, various test tools are required to test toxicity. It is necessary to properly evaluate the toxic effects to establish a biocompatibility test that mimics clinical conditions.
RESUMO
The development of direct pulp-capping materials with favorable biological and structural properties is an important goal in restorative dentistry. Fucoidan is a sulfated, fucose-containing polysaccharide obtained from brown seaweed, with a wide range of applications; however, its use as a direct pulp-capping material has not been examined. This study aimed to evaluate the mechanical, physical, and biological effects of fucoidan combined with conventional mineral trioxide aggregate (MTA) for direct pulp capping. The capping materials were created using Portland cement (80 wt%) and zirconium oxide (20 wt%) as base components, compared with base components plus 5 wt% fucoidan (PZF5) and base components plus 10 wt% fucoidan (PZF10). The initial and final setting time, compressive strength, chemical components, cell viability, adhesion, migration, osteogenesis, and gene expression were analyzed. Fucoidan significantly reduced the initial and final setting time, regardless of quantity. However, the compressive strength was lower for PZF5. Sulfur levels increased with fucoidan. The biological activity improved, especially in the PZF5 group. Cell migration, Alizarin Red S staining, and alkaline phosphatase activity were upregulated in the PZF5 group. Fucoidan is a useful regenerative additive for conventional pulp-capping materials because it reduces the setting time and improves cell migration and osteogenic ability.
RESUMO
This in vitro study aimed to examine the shear bond strength of composite on the dentin and enamel substrates when mixed with different composite-handling agents (CHAs). Eighty extracted molars were embedded into acrylic resin and sectioned sagittally. On the prepared specimens, four groups of resin mixtures were bonded onto the enamel or dentin surfacescomposite only, composite mixed with Composite Wetting Resin (CWR), composite mixed with Brush and Sculpt (BS), and composite mixed with Modeling Resin (MR). All groups were prepared by mixing at a 1:1 ratio by weight. Each specimen was subjected to the shear bond strength test. After the test, adhesive or cohesive failures were examined at the fractured sites. Data were analyzed using one-way and two-way analysis of variance (ANOVA) and the Tukey post hoc test. All composite groups mixed with CHAs displayed a reduced shear bond strength on dentin and enamel substrates compared to composite alone (p < 0.05). The shear bond strength on dentin decreased in the following order: CWR > BS > MR. A similar pattern was observed on enamel, except that there was no statistically significant difference between BS and MR. Statistically significant interactions between resin mixtures and substrates were found (p < 0.001). On the dentin substrate, adhesive failure dominated while adhesive/cohesive failure dominated on the enamel substrate. Conclusions: The shear bonding strength of composite decreases when mixed with CHAs on both dentin and enamel substrates.
RESUMO
The tensile bond strength between zirconia subjected to different surface-pretreatment methods and methacryloyloxydecyl-dihydrogen-phosphate (MDP)-containing self-adhesive resin cement was evaluated herein. Eighty-eight cylindrical zirconia specimens were randomly divided into the following four groups based on the pretreatment method: (1) no treatment, (2) air abrasion, (3) HNO3/HF etching, and (4) zirconia-nanoparticle coating. The tensile bond strength of the zirconia−resin-cement complexes was investigated. One-way ANOVA and post hoc tests were performed at a 95% significance level, and the Weibull modulus was calculated. Fracture patterns were visualized by SEM. The surface roughness of the specimens without resin bonding was evaluated by AFM. The tensile bond strength of the specimens decreased as follows: Groups 3 > 4 > 2 > 1 (28.2 ± 6.6, 26.1 ± 5.7, 16.6 ± 3.3, and 13.9 ± 3.0 MPa, respectively). Groups 3 and 4 had significantly higher tensile bond strengths (p < 0.05) and lower fracture probabilities than those of Groups 1 and 2. They also showed both mixed failure and resin-cement cohesive failure, whereas Groups 1 and 2 showed mixed failure exclusively. The zirconia−resin tensile bond was stronger after HNO3/HF etching or ZrO2-nanoparticle coating than after air abrasion or no treatment. The estimated surface roughness decreased as follows: Groups 3 > 4 > 2 > 1. The combination of zirconia pretreated with HNO3/HF etching or ZrO2-nanoparticle coating and an MDP-containing self-adhesive resin cement can increase the clinical longevity of zirconia restorations by preventing their decementation.
RESUMO
Although inodilators (dobutamine and milrinone) are widely used empirically for cardiogenic shock (CS), the efficacy of inodilators for patients with CS undergoing veno-arterial extracorporeal membrane oxygenation (VA-ECMO) is controversial. We evaluated the effects of inodilators on clinical outcomes using the RESCUE (REtrospective and prospective observational Study to investigate Clinical oUtcomes and Efficacy of left ventricular assist device for Korean patients with cardiogenic shock; NCT02985008) registry. We selected and analyzed the clinical outcomes of 496 patients who underwent VA-ECMO and did or did not receive inodilators. Of the 496 patients, 257 (51.8%) died during hospitalization. We selected 191 matched pairs to adjust for baseline clinical characteristics after 1:1 propensity score matching (PSM). The univariate and multivariate analyses showed that the inodilator group had significantly lower in-hospital mortality than the no-inodilator group (unadjusted hazard ratio [HR], 0.768; 95% confidence interval [CI], 0.579-1.018; p = 0.066, adjusted HR, 0.702; 95% CI, 0.552-0.944; p = 0.019). For patients with CS undergoing VA-ECMO, inodilators may improve clinical outcomes.
RESUMO
AIMS: This study aimed to investigate differences in baseline and treatment characteristics, and in-hospital mortality according to the aetiologies of cardiogenic shock in patients undergoing veno-arterial-extracorporeal membrane oxygenation (VA-ECMO). METHODS AND RESULTS: The RESCUE registry is a multicentre, observational cohort that includes 1247 patients with cardiogenic shock from 12 centres. A total of 496 patients requiring VA-ECMO were finally selected, and the study population was stratified by cardiogenic shock aetiology [ischaemic cardiomyopathy (ICM, n = 342) and non-ICM (NICM, n = 154)]. The primary outcome of interest was in-hospital mortality. Sensitivity analyses including propensity-score matching adjustments were performed. Mean age of the entire population was 61.8 ± 14.2, and 30.8% were women. There were significant differences in baseline characteristics; notable differences included the older age of patients with ICM (65.1 ± 13.7 vs. 58.2 ± 13.8, P < 0.001), preponderance of males [258 (75.4%) vs. 85 (55.2%), P < 0.001], and higher prevalence of diabetes mellitus [140 (40.9%) vs. 39 (25.3%), P = 0.001] compared with patients in the NICM aetiology group. Patients with ischaemic cardiogenic shock were more likely to have longer shock duration before VA-ECMO implantation (518.7 ± 941.4 min vs. 292.4 ± 707.8 min, P = 0.003) and were less likely to undergo distal limb perfusion than those with NICM [108 (31.6%) vs. 79 (51.3%), P < 0.001]. In-hospital mortality in the overall cohort was 52.2%; patients with ICM had a higher unadjusted risk of in-hospital mortality [203 (59.4%) vs. 56 (36.4%); unadjusted hazard ratio, 2.295; 95% confidence interval, 1.698-3.100; P < 0.001]. There were no significant differences in the primary outcome between the two aetiologies following propensity-score matching multiple adjustments (adjusted hazard ratio, 1.265; 95% confidence interval, 0.840-1.906; P = 0.260). CONCLUSIONS: Results of the current study indicated among patients with cardiogenic shock undergoing VA-ECMO, ischaemic aetiology does not seem to impact in-hospital mortality. These findings underline that early initiation and appropriate treatment strategies of VA-ECMO for patients with ICM shock are required.
Assuntos
Cardiomiopatias , Oxigenação por Membrana Extracorpórea , Idoso , Cardiomiopatias/complicações , Cardiomiopatias/epidemiologia , Cardiomiopatias/terapia , Feminino , Mortalidade Hospitalar , Hospitais , Humanos , Masculino , Choque Cardiogênico/epidemiologia , Choque Cardiogênico/etiologia , Choque Cardiogênico/terapiaRESUMO
PURPOSE: To assess the effect of extraoral polishing of the crown-abutment interface on the marginal fit of implant-supported screw- and cement-retained prostheses (SCRPs). MATERIALS AND METHODS: In 31 patients, the marginal gap of an SCRP was measured using a stereomicroscope before and after polishing of the crown-abutment interface, and the paired data were compared. RESULTS: The marginal gap was significantly decreased after surface polishing regardless of the prosthesis material (P < .001). CONCLUSION: Extraoral polishing of the crown-abutment interface could improve the marginal fit of SCRPs.
Assuntos
Cimentação , Prótese Dentária Fixada por Implante , Parafusos Ósseos , Coroas , Humanos , Projetos PilotoRESUMO
We evaluated whether thrombus aspiration (TA) during primary percutaneous coronary intervention (PCI) reduces adverse clinical outcomes within 30-days and 1-year periods. There is no well-designed, Korean data about the clinical impact of intracoronary TA during primary PCI in patients with ST-segment elevation myocardial infarction (STEMI). From the Korea Acute Myocardial Infarction Registry-National Institute of Health, 3749 patients with STEMI undergoing primary PCI within 12 hours (60.8±12.9 years, 18.7% women) with pre-procedural Thrombolysis in Myocardial Infarction (TIMI) flow 0, 1 in coronary angiography were enrolled between November 2011 and December 2015. The patients were divided into two groups: PCI with TA (n=1630) and PCI alone (n=2119). The primary end-point was major adverse cardiac event (MACE), defined as the composite of cardiovascular death (CVD), recurrent MI and stroke for 30-days and 1-year. TA did not diminish the risk of MACE, all-cause mortality and CVD in all patients during 30-days or 1-year. After performing the propensity score matching, TA also did not reduce the risk of MACE (Hazard ratio (HR) with 95% Confidence Interval (CI):1.187 [0.863-1.633], p value=0.291), all-cause mortality (HR with 95% CI: 1.130 [0.776-1.647], p value=0.523) and CVD (HR with 95% CI: 1.222 [0.778-1.920], p value=0.384) during the 1-year period. In subgroup analysis, there was no benefit of clinical outcomes favoring PCI with TA. In conclusion, primary PCI with TA did not reduce MACE, all-cause mortality or CVD among the Korean patients with STEMI and pre-procedural TIMI flow 0, 1 during the 30-day and 1-year follow ups.
RESUMO
PURPOSE: The present study was designed to examine the clinical fit of fixed dental prosthesis fabricated by the milling-sintering method using a presintered cobalt-chromium alloy. MATERIALS AND METHODS: Two single metal-ceramic crowns were fabricated via milling-sintering method and casting method in each of the twelve consecutive patients who required an implant-supported fixed prosthesis. In the milling-sintering method, the prosthetic coping was designed in computer software, and the design was converted to a non-precious alloy coping using milling and post-sintering process. In the casting method, the conventional manual fabrication process was applied. The absolute marginal discrepancy of the prostheses was evaluated intraorally using the triple-scan technique. Statistical analysis was conducted using Mann-Whitney U test (α=.05). RESULTS: Eight patients (66.7%) showed a lower marginal discrepancy of the prostheses made using the milling-sintering method than that of the prosthesis made by the casting method. Statistically, the misfit of the prosthesis fabricated using the milling-sintering method was not significantly different from that fabricated using the casting method (P=.782). There was no tendency between the amount of marginal discrepancy and the measurement point. CONCLUSION: The overall marginal fit of prosthesis fabricated by milling-sintering using a presintered alloy was comparable to that of the prosthesis fabricated by the conventional casting method in clinical use.
RESUMO
BACKGROUND AND OBJECTIVES: Neurologic intolerance (NI) is defined as the occurrence of neurological symptoms during carotid artery stenting (CAS). Because NI is inevitable problem, it may be helpful to anticipate its occurrence. So, we studied factors associated with NI during proximal protected CAS. METHODS: We retrospectively analyzed all consecutive patients underwent proximal protected CAS from August 2012 to January 2017. RESULTS: We included total 123 patients (109 males, 72±8 years old). The total procedure time was 43±12 minutes, and mean occlusion time was 4.8±1.2 minutes. We divided CAS patients into 2 groups according to presence of NI; neurologic tolerance (NT; n=74, 60%) and NI (n=49, 40%) groups. After the univariate analysis, symptomatic carotid artery stenosis (p=0.003), absence of anterior communicating artery (p=0.015) and low common carotid artery occlusion pressure (CCAOP, p<0.001) were associated with NI. After the multivariate analysis, NI was significantly associated with symptomatic carotid artery stenosis (odds ratio [OR], 5.549; p=0.014) and systolic CCAOP≤42 mmHg (OR, 6.461; p<0.001). In NI group, 43 patients (88%) recovered right after the balloon deflation and 2 patients were normalized within 2 hours. However, 1 had major stroke and 3 had minor strokes in 4 patients with persistent NI ≥24 hours. CONCLUSIONS: About 40% showed NI during the CAS. Most of them (88%, 43 of 49 patients) recovered after the balloon deflation, but stroke incidence was significantly higher in NI group. Symptomatic carotid artery stenosis and systolic CCAOP ≤42 mmHg were significantly associated with the development of NI during proximal protected CAS.
RESUMO
Dental light-cured resins can undergo different degrees of polymerization when applied in vivo. When polymerization is incomplete, toxic monomers may be released into the oral cavity. The present study assessed the cytotoxicity of different materials, using sample preparation methods that mirror clinical conditions. Composite and bonding resins were used and divided into four groups according to sample preparation method: uncured; directly cured samples, which were cured after being placed on solidified agar; post-cured samples were polymerized before being placed on agar; and "removed unreacted layer" samples had their oxygen-inhibition layer removed after polymerization. Cytotoxicity was evaluated using an agar diffusion test, MTT assay, and confocal microscopy. Uncured samples were the most cytotoxic, while removed unreacted layer samples were the least cytotoxic (p < 0.05). In the MTT assay, cell viability increased significantly in every group as the concentration of the extracts decreased (p < 0.05). Extracts from post-cured and removed unreacted layer samples of bonding resin were less toxic than post-cured and removed unreacted layer samples of composite resin. Removal of the oxygen-inhibition layer resulted in the lowest cytotoxicity. Clinicians should remove unreacted monomers on the resin surface immediately after restoring teeth with light-curing resin to improve the restoration biocompatibility.