Redox-homogeneous, gel electrolyte-embedded high-mass-loading cathodes for high-energy lithium metal batteries.

Lithium metal batteries have higher theoretical energy than their Li-ion counterparts, where graphite is used at the anode. However, one of the main stumbling blocks in developing practical Li metal batteries is the lack of cathodes with high-mass-loading capable of delivering highly reversible redox reactions. To overcome this issue, here we report an electrode structure that incorporates a UV-cured non-aqueous gel electrolyte and a cathode where the LiNi0.8Co0.1Mn0.1O2 active material is contained in an electron-conductive matrix produced via simultaneous electrospinning and electrospraying. This peculiar structure prevents the solvent-drying-triggered non-uniform distribution of electrode components and shortens the time for cell aging while improving the overall redox homogeneity. Moreover, the electron-conductive matrix eliminates the use of the metal current collector. When a cathode with a mass loading of 60 mg cm-2 is coupled with a 100 µm thick Li metal electrode using additional non-aqueous fluorinated electrolyte solution in lab-scale pouch cell configuration, a specific energy and energy density of 321 Wh kg-1 and 772 Wh L-1 (based on the total mass of the cell), respectively, can be delivered in the initial cycle at 0.1 C (i.e., 1.2 mA cm-2) and 25 °C.

Nanofibrous Conductive Binders Based on DNA-Wrapped Carbon Nanotubes for Lithium Battery Electrodes.

In contrast to enormous progresses in electrode active materials, little attention has been paid to electrode sheets despite their crucial influence on practical battery performances. Here, as a facile strategy to address this issue, we demonstrate nanofibrous conductive electrode binders based on deoxyribonucleic acid (DNA)-wrapped single-walled carbon nanotubes (SWCNT) (denoted as DNA@SWCNT). DNA@SWCNT binder allows the removal of conventional polymeric binders and carbon powder additives in electrodes. As a proof of concept, high-capacity overlithiated layered oxide (OLO) is chosen as a model electrode active material. Driven by nanofibrous structure and DNA-mediated chemical functionalities, the DNA@SWCNT binder enables improvements in the redox reaction kinetics, adhesion with metallic foil current collectors, and chelation of heavy metal ions dissolved from OLO. The resulting OLO cathode exhibits a fast charging capability (relative capacity ratio after 15 min [versus 10 h] of charging = 83%), long cyclability (capacity retention = 98% after 700 cycles), and thermal stability.