RESUMO
OBJECTIVE: Orthodontic treatment plays a crucial role in achieving optimal dental esthetics and functional occlusion. However, when periodontally compromised patients are involved, additional precautions and considerations are critical. This article aims to provide up-to-date recommendations for the orthodontic treatment of periodontally compromised patients. CLINICAL CONSIDERATIONS: Comprehensive diagnosis of the patient's periodontal status, inherent malocclusion, and secondary malocclusion resulting from periodontal disease are essential for achieving optimal esthetics and functional occlusion. This can be facilitated through the use of a simplified checklist. Prior to orthodontic treatment, pre-existing periodontal diseases should be managed. Light and controlled forces should be used to minimize the risk of adverse effects on the periodontium, and any potential traumatic occlusion during tooth movement should be minimized. Furthermore, careful anchorage management is required, and proper application of temporary anchorage devices can significantly expand the scope of orthodontic treatment. Finally, treatment results are maintained by ongoing supportive periodontal therapy even during the retention period. CONCLUSIONS: This article presents clinical cases demonstrating the importance of accurate diagnosis in orthodontics and periodontics and the positive impact of orthodontic treatment on patients with pre-existing periodontal diseases. CLINICAL SIGNIFICANCE: An up-to-date orthodontic treatment protocol for periodontally compromised patients is presented.
Assuntos
Má Oclusão , Ortodontia , Doenças Periodontais , Dente , Humanos , Má Oclusão/terapia , Doenças Periodontais/complicações , Doenças Periodontais/terapia , Periodonto , Técnicas de Movimentação DentáriaRESUMO
BACKGROUND: Recent human and animal studies have demonstrated that Nod-like receptor family, pyrin domain-containing 3 (NLRP3) inflammasome is closely involved in the development of allergic diseases. OBJECTIVE: To identify the mechanism underlying the activation of NLRP3 inflammasome signaling pathway in an ovalbumin (OVA)-induced allergic rhinitis (AR) mice model and to validate the effect of a specific inhibitor of the NLRP3, MCC950. METHODS: Mice were divided into three groups and each group consisted of ten mice (saline group, the negative control group; OVA group, the OVA-induced AR model group; and OVA+MCC group, treated with 10 mg/kg MCC950). MCC950 was administered intraperitoneally every second day. Multiple parameters of AR, including NLRP3, caspase-1, interleukin (IL)-1ß, and IL-18 were evaluated by using ELISA, RT-qPCR, histopathology, and immunohistochemistry. RESULTS: The mRNA and protein levels of NLRP3, caspase-1, IL-1ß and IL-18 were upregulated in the OVA group compared with those of the saline group. MCC950 significantly inhibited the mRNA and protein levels of NLRP3, caspase-1, IL-1ß and IL-18 in nasal tissue. Further, AR symptoms and eosinophil count were normalized after MCC950 treatment. However, OVA-specific IgE was not restored in the OVA+MCC group. CONCLUSION: NLRP3 inflammasome signaling pathway may be an alternative pathway to induce AR symptoms in OVA-induced AR model. MCC950 is a specific inhibitor of NLRP3 cascade, which attenuates AR symptoms regardless of IgE.
RESUMO
Background and Objectives: A derivative of the enamel matrix was used to speed up periodontal regeneration, including the formation of new cementum, alveolar bone, and periodontal ligament. In this study, human gingiva-derived stem cell-derived cell spheroids were used to assess the effects of an enamel matrix derivative on cell viability, osteogenic differentiation, and mineralization. Materials and Methods: Human gingiva-derived stem cells were used to create spheroids, which were then coupled with unloaded control groups and an enamel matrix derivative at a final concentration of 2.7, 27, 270, and 2700 µg/mL. The morphological examination of the created stem cell spheroids took place on days 1, 3, 5, and 7. The Live/Dead Kit assay was used to determine the qualitative viability of cells on days 3 and 7. Using the Cell Counting Kit-8, the quantitative vitality of the cell spheroids was assessed on days 1, 3, and 5. On days 7 and 14, alkaline phosphatase activity assays and Alizarin Red S staining were carried out to examine the osteogenic differentiation of the cell spheroids. RUNX2 and COL1A1 expression levels on days 7 and 14 were determined using real-time polymerase chain reaction. Results: The added enamel matrix derivative at the tested concentrations did not significantly alter the morphology of the applied stem cells' well-formed spheroids on day 1. On days 3 and 7, the majority of the spheroids' cells fluoresced green while they were being cultivated. Alkaline phosphatase activity data revealed a substantial rise in the 2700 µg/mL group on day 7 when compared to the unloaded control (p < 0.05). On days 7 and 14, calcium deposits were distinctly seen in each group. In the 27 and 2700 µg/mL groups, the treatment with the enamel matrix derivative resulted in noticeably higher values for the Alizarin Red S staining (p < 0.05). qPCR results showed that adding an enamel matrix derivative to the culture of the 27 µg/mL group raised the level of RUNX2 mRNA expression. Conclusions: These results lead us to the conclusion that a derivative of the enamel matrix may be used to promote osteogenic differentiation in stem cell spheroids.
Assuntos
Subunidade alfa 1 de Fator de Ligação ao Core , Osteogênese , Humanos , Subunidade alfa 1 de Fator de Ligação ao Core/metabolismo , Subunidade alfa 1 de Fator de Ligação ao Core/farmacologia , Gengiva , Fosfatase Alcalina , Diferenciação Celular , Células-Tronco , Células Cultivadas , Proliferação de CélulasRESUMO
Background and Objectives: Vitamin E is reported to expedite new bone formation in animal models, and this has led to a decrease in the time needed for treatment. In this study, human gingiva-derived stem cell-derived spheroids were examined to determine the effects of vitamin E on cell survival, osteogenic differentiation, and mineralization. Materials and Methods: Human gingiva-derived stem cells were used to create spheroids, which were then cultivated with vitamin E at doses of 0, 0.1, 1, 10, and 100 ng/mL. The morphological examination and the qualitative and quantitative vitality of the cells were assessed. Alizarin Red S staining and alkaline phosphatase activity assays were performed on days 7 and 14 to evaluate the osteogenic differentiation. The expression levels of RUNX2 and COL1A1 were assessed using a real-time polymerase chain reaction. Results: The addition of vitamin E did not appear to alter the spheroid's shape at the measured quantities without altering the diameter. During the culture time, the majority of the cells in the spheroids fluoresced green. Regardless of concentration, there were substantial increases in cell viability in the vitamin E-loaded groups on day 7 (p < 0.05). On day 14, the Alizarin Red S staining was statistically higher in the 1 ng/mL group compared to the unloaded control (p < 0.05). The addition of vitamin E to the culture enhanced the mRNA expression levels of RUNX2, OCN, and COL1A1 based on the real-time polymerase chain reaction data. Conclusions: We draw the conclusion that vitamin E may be used to promote the osteogenic differentiation of stem cell spheroids in light of these data.
Assuntos
Células-Tronco Mesenquimais , Osteogênese , Animais , Humanos , Sobrevivência Celular , Subunidade alfa 1 de Fator de Ligação ao Core/metabolismo , Subunidade alfa 1 de Fator de Ligação ao Core/farmacologia , Células Cultivadas , Gengiva , Células-Tronco , Diferenciação CelularRESUMO
Background and Objectives: Maxillary sinus pathologic conditions may increase the risk of complications during posterior maxillary sinus augmentation surgery. The purpose of this study was to evaluate the changes in participants with preoperative maxillary sinus mucosal thickening and to assess this factor as a preoperative risk indicator for sinusitis after maxillary dental implantation. Materials and Methods: We compared the preoperative and postoperative maxillary sinus mucosal thickness (MSMT), the distance between the maxillary sinus ostium and sinus floor (MOD), and the MSMT/MOD ratio. The participants were divided into three groups (sinus augmentation, bone grafting, and no grafting). Results: The mean preoperative MSMT was 4.3 ± 2.0 mm, and the mean MSMT/MOD ratio was 0.13 ± 0.05. No postoperative sinusitis was observed in these patients, including cases caused by anatomical variations. The mean postoperative MSMT was 4.5 ± 2.3 mm, and the mean postoperative MSMT/MOD ratio was 0.15 ± 0.06. There was no statistically significant difference between the groups at each time point (p > 0.05). Conclusions: The study found no significant change in MSMT at post-treatment evaluation, even when considering different subgroups. It underscores the importance of preoperative maxillary sinus radiographic assessments and collaboration between dentists and otolaryngologists for better outcomes in patients with preoperative maxillary sinus mucosal thickening.
Assuntos
Levantamento do Assoalho do Seio Maxilar , Sinusite , Humanos , Seio Maxilar/diagnóstico por imagem , Seio Maxilar/cirurgia , Seio Maxilar/patologia , Estudos Retrospectivos , Otorrinolaringologistas , Sinusite/patologiaRESUMO
AIM: Catheter migration is an important cause of catheter malfunction in peritoneal dialysis (PD). The purpose of this study was to investigate the effect of early detection of catheter migration on clinical outcomes. METHODS: A retrospective review of 135 consecutive patients initiating PD immediately following catheter insertion from 2002 to 2017 was undertaken. In order to detect catheter migration without malfunction early, serial abdominal-pelvic radiographic examinations were performed according to a predefined protocol. Conservative management with rigorous catharsis was undertaken to correct catheter migration. A Kaplan-Meier method was used to calculate survival rate. RESULTS: Mean follow-up period was 42.8 ± 34.9 months. Catheter migration occurred in 62.4%. Among them, 85.9% occurred within the first 2 weeks after catheter insertion. There were no significant associations between catheter migration and variables such as gender, obesity, DM and type of catheter. Success rate of conservative management with rigorous catharsis was 91.1%. Catheter survival at 1 and 5 years were 91.5% and 64.6% in the migration group and 81.2% and 69.9% in the non-migration group, respectively (Log-rank test, P = 0.915). Patient survival at 1 and 5 years were 96.8% and 85.8% in the migration group and 91.9% and 82.3% in the non-migration group, respectively (P = 0.792). CONCLUSION: Early detection of PD catheter migration allowed the migrated tip to be easily corrected with conservative management. Once the migrated catheter tip was restored, catheter migration itself did not affect catheter survival. These findings suggest that early detection and correction of catheter migration is important for improving clinical outcomes.
Assuntos
Cateteres de Demora/efeitos adversos , Migração de Corpo Estranho/diagnóstico por imagem , Diálise Peritoneal/instrumentação , Administração Oral , Adulto , Idoso , Catárticos/administração & dosagem , Tratamento Conservador , Diagnóstico Precoce , Enema , Feminino , Migração de Corpo Estranho/etiologia , Migração de Corpo Estranho/terapia , Glicerol/administração & dosagem , Humanos , Lactulose/administração & dosagem , Masculino , Pessoa de Meia-Idade , Diálise Peritoneal/efeitos adversos , Estudos Retrospectivos , Fatores de Tempo , Resultado do TratamentoRESUMO
Background and objectives: This study investigated the morphology of the labial and palatal bony wall of the maxillary central and lateral incisors using cone-beam computed tomography (CBCT). The difference between males and females and the measurement between right and left sides were measured. Materials and Methods: Twenty participants, consisting of 11 females and 9 males having normal occlusion, were used for the analysis. The mean age was 21.9 ± 3.0 years. The thickness of the labial bony wall and palatal bony wall, perpendicular to the long axis of the root, were evaluated at 3 and 5 mm apical from the cemento-enamel junction (CEJ) and at the root apex. The available bony wall below the apex of the central and lateral incisors, and the angulation between the long axis of the tested tooth and outer surface of the labial bone were measured. Results: The mean labial bony wall thickness at the 3 and 5 mm apical from the CEJ were 1.1 ± 0.3 mm and 1.0 ± 0.4 mm for central incisors, respectively, as well as 1.2 ± 0.4 mm and 1.0 ± 0.4 mm for lateral incisors, respectively. The mean palatal bony wall thickness at 5 mm from the CEJ was above 2 mm in the central and lateral incisors. The percentage of labial bony wall thickness 2 mm or greater at the root apex in central incisors was higher than in lateral incisors (62.5% vs. 55.0%). The percentage of palatal bony wall thickness ≥2 mm at 3 mm apical from the CEJ in the central incisors was higher than in the lateral incisors (37.5% vs. 15.0%). The results on the left and right sides did not show statistically significant differences, except in the labial and palatal bony wall thickness at 3 mm from the CEJ in the lateral incisor. Generally, no significant differences were seen between males and females, but males had a significantly higher labial bony wall thickness at 3 and 5 mm from the CEJ in the central and lateral incisors when compared with females. Conclusions: This study showed that a majority of the cases of Korean participants had less than 2 mm of labial bony wall thickness at 3 and 5 mm apical from the CEJ at central and lateral incisors, and this should be kept in mind while performing dental practices, including tooth extraction or immediate implantation in anterior regions. Preoperative analysis using CBCT may be beneficial for establishing the treatment plan.
Assuntos
Perda do Osso Alveolar/classificação , Oclusão Dentária , Incisivo/patologia , Adolescente , Tomografia Computadorizada de Feixe Cônico/métodos , Feminino , Humanos , Masculino , Maxila/patologia , Adulto JovemRESUMO
BACKGROUND: Odontogenic Ameloblast-Associated Protein (ODAM) in gingival crevicular fluid (GCF) can provide evidence of the detachment of junctional epithelium from the tooth surface by periodontitis. This study sought to investigate the ability of ODAM to reflect the severity of periodontitis at a site-specific level; thus whether there was a relationship between clinical diagnostic parameters and the value of ODAM in GCF was analyzed. METHODS: Eight periodontitis patients with various severities were enrolled, and the clinical parameters and samples of GCF were obtained from 44 to 60 sites of each subject. The ODAM concentration was quantified by enzyme-linked immunosorbent assay. Correlation analyses between clinical parameters and ODAM values and unadjusted and adjusted (linear) mixed model analyses were performed. The accuracy of ODAM to reflect sites having a probing depth (PD) ≥ 5 mm and a positive bleeding on probing (BOP) was evaluated by receiver-operating characteristic analysis. RESULTS: A total of 424 GCF samples were collected. The mean ODAM concentration from each patient varied from 0.2 to 1.52 ng/ml. Correlations between PD or clinical attachment level (CAL) and ODAM values were found (p < 0.0001). An adjusted linear mixed model showed that PD or CAL were associated with ODAM values (p < 0.05). The area under the curve of ODAM, which reflected sites with PD ≥ 5 mm and positive BOP, was 0.661 (p < 0.0001). CONCLUSION: This result shows the possibility of GCF ODAM as a site-specific biomarker for periodontal tissue destruction.
Assuntos
Proteínas de Transporte/metabolismo , Líquido do Sulco Gengival/química , Periodontite/diagnóstico , Adulto , Idoso , Amiloide , Biomarcadores/metabolismo , Ensaio de Imunoadsorção Enzimática , Feminino , Humanos , Peptídeos e Proteínas de Sinalização Intracelular , Masculino , Pessoa de Meia-Idade , Proteínas de Neoplasias , Índice Periodontal , Periodontite/metabolismo , Projetos PilotoRESUMO
PURPOSE: This study was performed to fabricate stem-cell spheroids formed with human gingiva-derived stem cells and endothelial cells and to evaluate their viability and osteogenic differentiation potential. MATERIALS AND METHODS: Gingiva-derived stem cells were isolated, and stem cells and endothelial cells with a total of 6 × 10 cells were seeded into concave micromolds with different ratios of 6:0 (group 1), 4:2 (group 2), 3:3 (group 3), and 2:4 (group 4). RESULTS: Gingiva-derived stem cells and/or endothelia cells formed spheroids in concave microwells. There was a decreasing trend in the diameter of spheroids with increasing amounts of endothelial cells, but there were no statistically significant differences between the groups. The secretion of vascular endothelial growth factor from the spheroids was noted. The results of the alkaline phosphatase activity assays showed significantly higher values for groups 2, 3, and 4 when compared with the value of group 1. CONCLUSIONS: Conclusively, stem-cell spheroids formed with human gingiva-derived stem cells and endothelial cells using concave microwells enhanced osteogenic differentiation potential, and multicell spheroid-based cell delivery could be a simple and effective strategy for improving stem-cell therapy.
Assuntos
Células-Tronco Adultas/fisiologia , Células Endoteliais/fisiologia , Gengiva/citologia , Esferoides Celulares/citologia , Fosfatase Alcalina/metabolismo , Diferenciação Celular , Sobrevivência Celular , Técnicas de Cocultura , Humanos , Osteogênese/fisiologia , Fator A de Crescimento do Endotélio Vascular/metabolismoRESUMO
OBJECTIVES: This in vitro study was conducted: (i) to evaluate the effect of using cotton pellets soaked with chlorhexidine (CHX) on titanium surface roughness; (ii) to assess the removal of Porphyromonas gingivalis (P. gingivalis) from resorbable blast material (RBM) titanium surfaces using CHX pellets; and (iii) to evaluate the effects of additional brushing on bacterial removal efficiency. MATERIALS AND METHODS: RBM titanium discs were treated with CHX-soaked cotton pellets, and change in surface roughness was measured using confocal microscopy. After the titanium discs were incubated with P. gingivalis for 2 days, the discs were cleaned with CHX pellets for 40 s. The quantity of remaining adherent bacteria was measured using crystal violet assay. Additional brushing was performed with dentifrice for a total of 40 s, and bacterial removal efficiency with brushing and dentifrice was evaluated using crystal violet assay and scanning electron microscopy. RESULTS: The changes in surface roughness after treatment were observed by confocal microscopy. Statistically significant decrease in surface roughness was seen in CHX 40-s group (p < 0.05). Cleaning with CHX-soaked pellets resulted in significant decrease in remaining adherent bacteria. Brushing the bacteria-incubated discs with dentifrice reduced adhering bacteria. There were fewer bacteria left on the CHX-pre-treated discs compared with the brushing-only group, but there were no significant differences when compared with the brushing-only group (p > 0.05). CONCLUSIONS: This study clearly showed that burnishing with CHX influenced the RBM titanium surface, and burnishing with CHX pellets and brushing with dentifrice were efficient in removing bacteria from the contaminated titanium surface.
Assuntos
Bactérias/efeitos dos fármacos , Clorexidina/farmacologia , Dentifrícios/farmacologia , Titânio/química , Escovação Dentária , Bactérias/crescimento & desenvolvimento , Aderência Bacteriana/efeitos dos fármacos , Carga Bacteriana , Materiais Dentários/química , Violeta Genciana , Teste de Materiais , Microscopia Confocal , Microscopia Eletrônica de Varredura , Porphyromonas gingivalis/efeitos dos fármacos , Porphyromonas gingivalis/crescimento & desenvolvimento , Propriedades de Superfície , Fatores de TempoRESUMO
OBJECTIVE: To examine the dose-dependent impact of Asiasari Radix (A. radix) on the cell viability, differentiation and mineralization of stem cells derived from gingiva. METHODS: Stem cells that were derived from gingiva were grown in the presence of A. radix at final concentrations that ranged from 0.001 to 10 µg/mL. The morphology of the cells was viewed under an inverted microscope and the analysis of cell proliferation was performed by using Cell Counting Kit-8 (CCK-8) on day 1. The alkaline phosphatase activity test was used to assess differentiation and Alizarin red S staining was used to assess mineralization of treated cells. RESULTS: The control group showed spindleshaped, fibroblast-like morphology and the shapes of the cells in 0.001, 0.01, 0.1, 1 and 10 µg/mL of A. radix were similar to that of the control group at day 1. The cultures growing in the presence of 0.001 µg/mL of A. radix at day 1 showed an increase in the CCK-8 value (P < 0.05). Cultures growing in the presence of 0.001 µg/mL of A. radix presented the highest value for alkaline phosphatase activity (P > 0.05). Mineralized extracellular deposits were observed after Alizarin Red S staining and the cultures grown in the presence of 0.001 µg/mL of A. radix showed the highest value for quantitative results for bound dye (P < 0.05). CONCLUSION: Within the limits of this study, A. radix influenced the proliferation of stem cells derived from the gingiva and low concentrations of A. radix might enhance osteogenic differentiation of the stem cells.
Assuntos
Medicamentos de Ervas Chinesas/farmacologia , Gengiva/citologia , Osteogênese/efeitos dos fármacos , Células-Tronco/efeitos dos fármacos , Proliferação de Células/efeitos dos fármacos , Sobrevivência Celular/efeitos dos fármacos , Células Cultivadas , Gengiva/efeitos dos fármacos , Humanos , Células-Tronco/citologiaRESUMO
OBJECTIVE: Mechanical techniques, including scaling with metal, plastic, or ultrasonic instruments, rubber cup polishing, air-powder abrasive system and brushing with a conventional or a rotating brush, have been used for the debridement of dental implants. Recently, rotating brushes with titanium bristles (titanium brush) have been introduced for the debridement of implant surface when peri-implant osseous defects occur. The purpose of this study was to evaluate the effects of a titanium brush on machined (MA) and sand-blasted and acid-etched (SA) titanium surfaces using scanning electron microscopy, confocal microscopy and profilometry. Moreover, correlations between the two quantitative evaluation methods (confocal microscopy and contact profilometry) were assessed. MATERIALS AND METHODS: Both MA and SA discs were treated with rotating titanium brush at 300 rpm under irrigation for a total of 40 s. Roughness measurements were taken with confocal microscopy and surface profilometry. Then, the MA and SA surfaces were evaluated using scanning electron microscopy to determine the changes of the surface properties. RESULTS: Untreated MA surface demonstrated uniform roughness with circumferential machining marks, and scratch lines over the original surfaces were observed after treatment with the titanium brush. Similarly, the titanium brush produced noticeable changes on the SA titanium surfaces. However, this treatment with titanium brush did not significantly change the roughness parameters, including the arithmetic mean height of the surface (Sa) and the maximum height of the surface (Sz), in both MA and SA surfaces. Correlations between two evaluation methods showed a Pearson correlation coefficient of 0.98 with linear regression R(2) of 0.96. CONCLUSION: This study showed that the treatment with the titanium brush did not significantly change the roughness parameters, including Sa and Sz, in both MA and SA surfaces. Correlations between confocal microscopy and surface profilometry showed high correlation with a Pearson correlation coefficient of 0.98.
Assuntos
Teste de Materiais , Peri-Implantite/prevenção & controle , Desbridamento Periodontal/instrumentação , Titânio , Implantes Dentários para Um Único Dente , Humanos , Microscopia Confocal , Microscopia Eletrônica de Varredura , Propriedades de SuperfícieRESUMO
PURPOSE: The purpose of this study was to evaluate the surface characteristics of various implant abutment materials, such as of titanium alloy (Ti6Al4V; Ma), machined cobalt-chrome-molybdenum alloy (CCM), titanium nitride coating on a titanium alloy disc (TiN), anodic oxidized titanium alloy disc (AO), composite resin coating on a titanium alloy disc (Res), and zirconia disc (Zr), using confocal microscopy and white light interferometry. Measurements from the 2 methods were evaluated to see if these methods would give equivalent results. The precision of measurements were evaluated by the coefficient of variation. MATERIALS AND METHODS: Five discs each of Ma, CCM, TiN, AO, Res, and Zr were used. The surface roughness was evaluated by confocal laser microscopy and white light interferometry. RESULTS: Confocal microscopy showed that the Res group showed significantly greater Ra, Rq, Rz, Sa, Sq, and Sz values compared with those of the Ma group (P < 0.05). The white light interferometry results showed that the Res group had significantly higher Ra, Rq, Rz, Rt, Sa, Sq, Sz, and Sdr values compared with the Ma group (P < 0.05). All the roughness parameters obtained from the 2 methods differed, and the Sa values of the Zr group from confocal microscopy were greater by 0.163 µm than those obtained by white light interferometry. Least difference was seen in the TiN group where the difference was 0.058 µm. CONCLUSION: Roughness parameters of different abutment materials varied significantly. Precision of measurement differed according to the characteristics of the material used. White light interferometry could be recommended for measurement of TiN and AO. Confocal microscopy gave more precise measurements for Ma and CCM groups. The optical characteristics of the surface should be considered before choosing the examination method.
Assuntos
Dente Suporte , Ligas , Resinas Compostas , Projeto do Implante Dentário-Pivô , Humanos , Interferometria , Microscopia Confocal , Propriedades de Superfície , Titânio , Vitálio , ZircônioRESUMO
PURPOSE: The purpose of this study was to investigate the alveolar bone thickness on the buccal and lingual aspects of mandibular canines and premolars using cone-beam computed tomography (CBCT). The differences between the left side and the right side and that in male and female measurements were reviewed. PATIENTS AND METHODS: Three-dimensional CBCT of 20 subjects with normal occlusion (9 males and 11 females; mean [SD] age, 21.9 [3.0] y) were used. The thickness of the buccal and lingual bone walls, perpendicular to the long axis of the root, was evaluated at 3 and 5 mm apical to the cementoenamel junction (CEJ) and at the root apex. RESULTS: The mean buccal bone thickness measured at 3 and 5 mm apical to the CEJ was less than 2 mm on the canines and the premolars. The buccal bone thickness of the second premolar at 3 and 5 mm from the CEJ was significantly greater than that of the canine and the first premolar. There were no significant differences between the left and right sides, and the overall measurements of the alveolar bone thickness did not show significant male/female differences. CONCLUSIONS: This study presented the thickness of the buccal and lingual bone in different locations apical to the CEJ in subjects with normal occlusion and the frequency distribution of thick buccal bone wall (≥ 2 mm). The second premolar had the highest frequency distribution of thick buccal bone (≥ 2 mm) when compared with canine and the first premolar. The teeth with thin buccal bone (< 2 mm) should be treated with care for the implant because a thin buccal bone may be damaged more easily and buccal bone resorption may occur. This study may provide estimated value for patients with normal occlusion during tooth extraction and implant installation in the canine and premolar area of the mandible. Preoperative radiographic analysis, with care in using CBCT, may be applied for tooth extraction and implant therapy.
Assuntos
Processo Alveolar/diagnóstico por imagem , Dente Pré-Molar/diagnóstico por imagem , Dente Canino/diagnóstico por imagem , Mandíbula/anatomia & histologia , Adolescente , Adulto , Processo Alveolar/anatomia & histologia , Tomografia Computadorizada de Feixe Cônico , Feminino , Humanos , Masculino , Mandíbula/diagnóstico por imagem , Fatores Sexuais , Ápice Dentário/diagnóstico por imagem , Raiz Dentária/diagnóstico por imagem , Adulto JovemRESUMO
Severe periodontitis affects nearly 1 billion individuals worldwide, highlighting the need for early diagnosis. Here, an integrated system consisting of a microfluidic chip and a portable point-of-care (POC) diagnostic device is developed using a polymethyl methacrylate (PMMA) chip fabrication and a three-dimensional printing technique, which is automatically controlled by a custom-designed smartphone application to routinely assess the presence of a specific periodontitis biomarker, odontogenic ameloblast-associated protein (ODAM). A sandwich-type fluorescence aptasensor is developed on a microfluidic chip, utilizing aptamer pair (MB@OD64 and OD35@FAM) selectively binding to target ODAM. Then this microfluidic chip is integrated into an automated Internet of Things (IoT)-based POC device, where fluorescence intensity, as a signal, from the secondary aptamer binding to ODAM in a sandwich-type binding reaction on the microfluidic chip is measured by a complementary metal oxide semiconductor (CMOS) camera with a 488 nm light-emitting diode (LED) excitation source. Obtained signals are processed by a microprocessor and visualized on a wirelessly connected smartphone application. This integrated biosensor system allows the rapid and accurate detection of ODAM within 30 min with a remarkable limit of detection (LOD) of 0.011 nM under buffer conditions. Clinical application is demonstrated by successfully distinguishing between low-risk and high-risk individuals with 100 % specificity. A strong potential in the translation of this fluorescence-based microfluidic aptasensor integrated with an IoT-based POC system is expected to be employed for non-invasive, on-site, rapid, and accurate ODAM detection, facilitating periodontitis diagnosis.
Assuntos
Técnicas Biossensoriais , Internet das Coisas , Doenças Periodontais , Periodontite , Humanos , Doenças Periodontais/diagnóstico , Periodontite/metabolismo , ProteínasRESUMO
PURPOSE: The dental implant surface will be colonized by bacteria once it is exposed to the oral cavity. It is necessary to keep the titanium surface clean to prevent peri-implant diseases. Mechanical instrumentation is widely used, but this may cause damage to the implant surfaces. There is limited information whether surface change resulting from instrumentation influences the adherence of bacteria to the implant surface or influences the ease of removal of bacteria from the titanium surface by daily brushing. Therefore, this in vitro study was performed (1) to evaluate removal of Porphyromonas gingivalis from sand-blasted and acid-etched (SLA) titanium discs after the discs were instrumented by various ultrasonic scaler tips or brushed with a toothbrush with dentifrice using crystal violet assay and scanning electron microscopy (SEM), and (2) to assess the change of surface roughness after the treated discs were brushed with a toothbrush with dentifrice. MATERIALS AND METHODS: SLA discs were treated with various ultrasonic scaler tips and a toothbrush. The titanium discs were incubated with P. gingivalis for 2 days after treatment (ultrasonic scales tips and brush) and then the disc surfaces were brushed for total of 40 seconds (20 seconds, two cycles) with a toothbrush with dentifrice. Differences in adhering bacteria were evaluated using crystal violet assay and SEM. Surface roughness of the treated discs after brushing with dentifrice was measured using confocal microscopy. RESULTS: The change of surface structure was observed after different treatment modalities. Removal of bacteria was increased with the longer time of brushing, and the ultrasonic metal tip group displayed a significantly lower number of bacteria after brushing when compared to other groups. CONCLUSIONS: Within the limits of this study, it may be suggested that when SLA surface is exposed to the oral cavity, it should firstly be treated with metal tips to smoothen the rough surface and thereby reduce attachment of bacteria and facilitate the removal of bacteria by daily oral hygiene procedures.
Assuntos
Implantes Dentários/microbiologia , Raspagem Dentária/instrumentação , Titânio , Escovação Dentária , Ultrassom , Dentifrícios , Teste de Materiais , Microscopia Eletrônica de Varredura , Porphyromonas gingivalis , Propriedades de SuperfícieRESUMO
PURPOSE: Developmental endothelial locus-1 (DEL-1) plays a role in regulating neutrophil migration within the periodontium. The objective of this study was to evaluate the levels of DEL-1 in saliva and gingival crevicular fluid (GCF), as well as the number of neutrophils in patients with periodontitis. METHODS: Forty systemically healthy, non-smoking periodontitis patients participated in this study. Clinical periodontal parameters, including the plaque index, probing pocket depth (PPD), clinical attachment level, bleeding on probing, modified sulcular bleeding index, and marginal bone level, were measured. Levels of DEL-1, interleukin (IL)-1ß, IL-6, and IL-8 in unstimulated saliva samples, as well as DEL-1 in the GCF of 3 teeth from each participant, were assessed. Neutrophil counts in oral rinse and GCF samples were recorded. Spearman correlation coefficients were used to examine the correlation between protein levels, clinical parameters, and neutrophil quantities. Participants were divided into 2 age groups (those under 50 years and those 50 years or older) in order to investigate potential age-related differences. RESULTS: DEL-1 levels in the GCF showed a negative relationship with PPD (sum). Neutrophils in oral rinse samples were positively correlated with PPD, IL-8, and IL-1ß levels. Neutrophils in GCF exhibited a positive correlation with PPD (sum). Salivary DEL-1 levels showed correlations with IL-8 and IL-1ß, but not with the clinical parameters of periodontitis. CONCLUSIONS: The negative relationship observed between PPD and GCF DEL-1 levels is consistent with the proposed protective role of DEL-1.
RESUMO
The serine phosphatase SerB653 plays a crucial role in the infection of Porphyromonas gingivalis, which contributes to the pathogenesis of periodontitis, an inflammatory disease of teeth-supporting tissues. Because functional loss of SerB653 eliminates the virulence of P. gingivalis, SerB653 inhibitors are considered potential periodontitis therapeutic or preventive agents. To identify SerB653 inhibitors with potent anti-periodontitis activity, we conducted a high-throughput screen of a representative 6800-compound subset of a synthetic chemical library of the Korea Chemical Bank (KCB) for compounds with activity against SerB653. The primary screening yielded 150 hits, and subsequent confirmatory studies identified eight compounds, mainly within a single cluster of 3-acyl-2-phenylamino-1,4-dihydroquinolin-4-one derivatives, that showed greater than 50% inhibition of SerB653 activity at a concentration of 50µM. A second screening with a focused library identified 10 compounds with IC(50) values less than 10µM. In antibacterial tests, three of these compounds showed a minimum inhibitory concentration against P. gingivalis growth of 5-50nM.
Assuntos
Inibidores Enzimáticos/farmacologia , Periodontite/microbiologia , Monoéster Fosfórico Hidrolases/antagonistas & inibidores , Porphyromonas gingivalis/efeitos dos fármacos , Porphyromonas gingivalis/enzimologia , Quinolinas/farmacologia , Infecções por Bacteroidaceae/tratamento farmacológico , Infecções por Bacteroidaceae/enzimologia , Inibidores Enzimáticos/química , Humanos , Modelos Moleculares , Periodontite/tratamento farmacológico , Monoéster Fosfórico Hidrolases/metabolismo , Porphyromonas gingivalis/crescimento & desenvolvimento , Quinolinas/química , Relação Estrutura-AtividadeRESUMO
PURPOSE: Instrumentation to remove plaque from dental implants may cause damage to the implant surface, and previous studies that have evaluated the effects of the ultrasonic scalers and brushing in experimental settings reported that substantial changes were seen on implant surfaces after mechanical plaque removal. There is limited information on changes of the surface profile and roughness of sandblasted acid-etched (SLA) and machined titanium surfaces after treatment with different instruments in simulated clinical situations. The purpose of this study was to evaluate the effects of oral hygiene instruments including various types of ultrasonic tips in simulated clinical settings and brushing with dentifrice on machined and SLA titanium surface with confocal microscopy. METHODS: Both SLA and machined discs were treated with various ultrasonic scaler tips and brushing. Discs were either instrumented with 4 different ultrasonic scaler tips or brushed with dentifrice. The entire top surface of the discs was instrumented for a total of 40 seconds (20 seconds, 2 cycles). Brushing with dentifrice was done for 40 seconds. Roughness measurements were performed using a confocal microscope. RESULTS: The change of surface structure after different treatment modalities could be observed with the naked eye when compared with the untreated surface (SLA and machined groups). In case of SLA surfaces, the 2 metal tips produced greater changes on the titanium surfaces when compared with the plastic ultrasonic tips and brushing. On the machined discs, scratch lines over the original surfaces could be observed from all ultrasonic metal and plastic tips, but 2 metal tips produced significant and definite scratches on the original disc surfaces. CONCLUSIONS: This study showed the effects of different types of ultrasonic tips and brushing with dentifrice on both SLA and machined titanium surfaces in simulated clinical setting. Within the limits of our study, we suggest that metal or plastic ultrasonic scaler tips may be applied as usual to treat the SLA surface of dental abutment or fixture surfaces without increasing the irregularities on the titanium surfaces. However, in case of machined surfaces, ultrasonic metal tips cannot be recommended because the surface becomes rougher after treatment. In addition, brushing of titanium, regardless of surface treatment (SLA and machined surfaces), resulted in reduction of surface roughness. Meticulous oral hygiene with brushing must be reinforced for the patients with dental implants to maintain the exposed implant surface clean. Brushing with dentifrice may facilitate maintaining the exposed fixture surface clean by smoothening the surface.
Assuntos
Implantes Dentários , Raspagem Dentária/instrumentação , Titânio , Escovação Dentária , Ultrassom , Condicionamento Ácido do Dente , Distribuição de Qui-Quadrado , Placa Dentária/terapia , Dentifrícios , Desenho de Equipamento , Microscopia Confocal , Propriedades de SuperfícieRESUMO
PURPOSE: Systemic health has a profound effect on dental treatment. The aim of this study was to evaluate peri-implant bone loss and health screening data to discover factors that may influence peri-implant diseases. METHODS: This study analyzed the panoramic X-rays of patients undergoing health screenings at the Health Promotion Center at Seoul St. Mary's Hospital in 2018, to investigate the relationship between laboratory test results and dental data. The patients' physical data, such as height, weight, blood pressure, hematological and urine analysis data, smoking habits, number of remaining teeth, alveolar bone level, number of implants, and degree of bone loss around the implant, were analyzed for correlations. Their associations with glycated hemoglobin, glucose, blood urea nitrogen (BUN), creatinine, and severity of periodontitis were evaluated using univariate and multivariate regression analysis. RESULTS: In total, 2,264 patients opted in for dental health examinations, of whom 752 (33.2%) had undergone dental implant treatment. These 752 patients had a total of 2,658 implants, and 129 (17.1%) had 1 or more implants with peri-implant bone loss of 2 mm or more. The number of these implants was 204 (7%). Body mass index and smoking were not correlated with peri-implant bone loss. Stepwise multivariate regression analysis revealed that the severity of periodontal bone loss (moderate bone loss: odds ratio [OR], 3.154; 95% confidence interval [CI], 1.175-8.475 and severe bone loss: OR, 7.751; 95% CI, 3.003-20) and BUN (OR, 1.082; 95% CI, 1.027-1.141) showed statistically significant predictive value. The severity of periodontitis showed greater predictive value than the biochemical parameters of blood glucose, renal function, and liver function. CONCLUSIONS: The results of this study showed that periodontal bone loss was a predictor of peri-implant bone loss, suggesting that periodontal disease should be controlled before dental treatment. Diligent maintenance care is recommended for patients with moderate to severe periodontal bone loss.