RESUMO
Molecular persistently luminescent materials have received recent attention due to their promising applications in optical displays, biological imaging, chemical sensing, and security systems. In this review, we systematically summarize recent advances in establishing persistently luminescent materials-specifically focusing on materials composed of molecular hybrids for the first time. We describe the main strategies for synthesizing these hybrid materials, namely: (i) inorganics/organics, (ii) organics/organics, and (iii) organics/polymer systems and demonstrate how molecular hybrids provide synergistic effects, while improving luminescence lifetimes and efficiencies. These hybrid materials promote new methods for tuning key physical properties such as singlet-triplet excited state energies by controlling the chemical interactions and molecular orientations in the solid state. We review new advances in these materials from the perspective of examining experimental and theoretical approaches to room-temperature phosphorescence and thermally-activated delayed fluorescence. Finally, this review concludes by summarizing the current challenges and future opportunities for these hybrid materials.
RESUMO
Excitonic energy transfer (EnT) is the mechanism by which natural photosynthetic systems funnel energy from hundreds of antenna pigments to a single reaction center, which allows multielectron redox reactions to proceed with high efficiencies in low-flux natural light. This paper describes the use of electrostatically assembled CdSe quantum dot (QD) aggregates as artificial light harvesting-reaction center units for the photocatalytic reduction of H+ to H2, where excitons are funneled through EnT from sensitizer QDs (sQDs) to catalyst QDs (cQDs). Upon increasing the sensitizer-to-catalyst ratio in the aggregates from 1:2 to 20:1, the number of excitons delivered to each cQD (via EnT) per excitation of the system increases by a factor of nine. At the optimized sensitizer-to-catalyst ratio of 4:1, the internal quantum efficiency (IQE) of the reaction system is 4.0 ± 0.3%, a factor of 13 greater than the IQE of a sample that is identical except that EnT is suppressed due to the relative core sizes of the sQDs and cQDs. A kinetic model supports the proposed exciton funneling mechanism for enhancement of the catalytic activity.
RESUMO
Collisional intermolecular interactions between excited states form short-lived dimers and complexes that lead to the emergence of excimer/exciplex emission of lower energy, a phenomenon which must be differentiated from the photoluminescence (PL) arising from the monomeric molecules. Although the utilization of noncovalent bonding interactions, leading to the generation of excimer/exciplex PL, has been investigated extensively, precise control of the aggregates and their persistence at very low concentrations remains a rare phenomenon. In the search for a fresh approach, we sought to obtain exciplex PL from permanent structures by incorporating anthracene moieties into pyridinium-containing mechanically interlocked molecules. Beyond the optical properties of the anthracene moieties, their π-extended nature enforces [π···π] stacking that can overcome the Coulombic repulsion between the pyridinium units, affording an efficient synthesis of an octacationic homo[2]catenane. Notably, upon increasing the ionic strength by adding tetrabutylammonium hexafluorophosphate, the catenane yield increases significantly as a result of the decrease in Coulombic repulsions between the pyridinium units. Although the ground-state photophysical properties of the free cyclophane and the catenane are similar and show a charge-transfer band at â¼455 nm, their PL characters are distinct, denoting different excited states. The cyclophane emits at â¼562 nm (quantum yield ÏF = 3.6%, emission lifetime τs = 3 ns in MeCN), which is characteristic of a disubstituted anthracene-pyridinium linker. By contrast, the catenane displays an exciplex PL at low concentration (10-8 M) with an emission band centered on 650 nm (ÏF = 0.5%, τs = 14 ns) in MeCN and at 675 nm in aqueous solution. Live-cell imaging performed in MIAPaCa-2 prostate cancer cells confirmed that the catenane exciplex emission can be detected at micromolar concentrations.
Assuntos
Antracenos/química , Humanos , Estrutura MolecularRESUMO
Lead chalcogenide quantum dots (QDs) are promising acceptors for photovoltaic devices that harness the singlet fission (SF) mechanism. The rate of singlet fission of polyacenes in the presence of QDs is a critical parameter in determining the performance of such devices. The present study demonstrates that the rates of SF in a pentacene derivative, 6,13-diphenylanthracene (DPP), are modulated by forming coaggregates with PbS QDs in aqueous dispersions. PbS QDs generally accelerate SF within DPP aggregates, and the extent of acceleration depends on the size of the QD. The average rate of SF increases from 0.074 ps-1 for DPP-only aggregates to 0.37 ps-1 within DPP-D co-aggregates for QDs with radius 2.2 nm, whereas co-aggregation with the smallest (r = 1.6 nm) and largest (r = 2.7 nm) QDs we tried only slightly change the SF rate. The rate variation is associated with (i) the density of surface ligands, which is influenced by the faceting of the PbS surface, and (ii) the local dielectric constant for DPP. To accelerate SF, the ligands should be dense enough to provide sufficient affinity for DPP aggregates and effectively perturb the perpendicular alignment of DPP monomers within aggregates to increase the intermolecular coupling that promotes SF, but should not be too dense so as to form a low dielectric environment that disfavors SF. The study suggests that it is critical to consider the influence of the microenvironment of the QD surface on photophysical processes when fabricating QD/organic hybrid devices.
RESUMO
Colloidal semiconductor nanocrystals, or "quantum dots" (QDs), have several optical and chemical properties that give them the potential to enable nonincremental increases in the efficiencies of many types of photocatalytic reactions relevant for energy conversion and organic synthesis. Colloidal photocatalysts have many desirable characteristics of both heterogeneous and homogeneous catalysts but come with their own particular set of challenges. This viewpoint outlines some of the obstacles one first encounters when driving reactions with these colloids and offers some strategies for overcoming these obstacles, including ways to extend their excited state lifetimes, prevent corrosion by photogenerated holes, and choose a surface chemistry and buffering system for maximum colloidal stability over a range of environmental conditions.
RESUMO
The subject of this review is the colloidal quantum dot (QD) and specifically the interaction of the QD with proximate molecules. It covers various functions of these molecules, including (i) ligands for the QDs, coupled electronically or vibrationally to localized surface states or to the delocalized states of the QD core, (ii) energy or electron donors or acceptors for the QDs, and (iii) structural components of QD assemblies that dictate QD-QD or QD-molecule interactions. Research on interactions of ligands with colloidal QDs has revealed that ligands determine not only the excited state dynamics of the QD but also, in some cases, its ground state electronic structure. Specifically, the article discusses (i) measurement of the electronic structure of colloidal QDs and the influence of their surface chemistry, in particular, dipolar ligands and exciton-delocalizing ligands, on their electronic energies; (ii) the role of molecules in interfacial electron and energy transfer processes involving QDs, including electron-to-vibrational energy transfer and the use of the ligand shell of a QD as a semipermeable membrane that gates its redox activity; and (iii) a particular application of colloidal QDs, photoredox catalysis, which exploits the combination of the electronic structure of the QD core and the chemistry at its surface to use the energy of the QD excited state to drive chemical reactions.
RESUMO
Photosensitization of molecular catalysts to reduce CO2 to CO is a sustainable route to storable solar fuels. Crucial to the sensitization process is highly efficient transfer of redox equivalents from sensitizer to catalyst; in systems with molecular sensitizers, this transfer is often slow because it is gated by diffusion-limited collisions between sensitizer and catalyst. This article describes the photosensitization of a meso-tetraphenylporphyrin iron(III) chloride (FeTPP) catalyst by colloidal, heavy metal-free CuInS2/ZnS quantum dots (QDs) to reduce CO2 to CO using 450 nm light. The sensitization efficiency (turnover number per absorbed unit of photon energy) of the QD system is a factor of 18 greater than that of an analogous system with a fac-tris(2-phenylpyridine)iridium sensitizer. This high efficiency originates in ultrafast electron transfer between the QD and FeTPP, enabled by formation of QD/FeTPP complexes. Optical spectroscopy reveals that the electron-transfer processes primarily responsible for the first two sensitization steps (FeIIITPP â FeIITPP, and FeIITPP â FeITPP) both occur in <200 fs.
RESUMO
The problem this paper addresses is the origin of the hysteretic behavior in two-terminal molecular junctions made from an EGaIn electrode and self-assembled monolayers of alkanethiolates terminated in chelates (transition metal dichlorides complexed with 2,2'-bipyridine; BIPY-MCl2). The hysteresis of conductance displayed by these BIPY-MCl2 junctions changes in magnitude depending on the identity of the metal ion (M) and the window of the applied voltage across the junction. The hysteretic behavior of conductance in these junctions appears only in an incoherent (Fowler-Nordheim) tunneling regime. When the complexed metal ion is Mn(II), Fe(II), Co(II), or Ni(II), both incoherent tunneling and hysteresis are observed for a voltage range between +1.0 V and -1.0 V. When the metal ion is Cr(II) or Cu(II), however, only resonant (one-step) tunneling is observed, and the junctions exhibit no hysteresis and do not enter the incoherent tunneling regime. Using this correlation, the conductance characteristics of BIPY-MCl2 junctions can be controlled. This voltage-induced change of conductance demonstrates a simple, fast, and reversible way (i.e., by changing the applied voltage) to modulate conductance in molecular tunneling junctions.
RESUMO
This paper describes a photocatalytic hydrogen evolution system that is dynamically and reversibly responsive to the pH of the surrounding solution through the actuation of a microhydrogel (microgel) matrix that hosts the photocatalysts (CdSe/CdS nanorods). The reversible actuation occurs within 0.58 (swelling) and 1.7 s (contraction). ΔpH = 0.01 relative to the pKa of the tertiary amine on the microgel polymer (7.27) results in a reversible change in the average diameter of the microgel hosts by a factor of 2.4 and a change in the photocatalytic turnover frequency (TOF) by a factor of 5. Kinetic isotope effect and photoluminescence quenching experiments reveal that the scavenging of the photoexcited hole by sulfite ions is the rate-limiting step and leads to the observed response of the TOF to pH through the actuation of the microgel. Molecular dynamics simulations quantify a greater local concentration of sulfite hole scavengers for pH < pKa.
Assuntos
Hidrogéis/química , Luz , Compostos de Cádmio/química , Catálise , Óxido de Deutério/química , Concentração de Íons de Hidrogênio , Cinética , Simulação de Dinâmica Molecular , Nanotubos/química , Compostos de Selênio/química , Sulfetos/químicaRESUMO
Light-driven [2+2] cycloaddition is the most direct strategy to build tetrasubstituted cyclobutanes, core components of many lead compounds for drug development. Significant advances in the chemoselectivity and enantioselectivity of [2+2] photocycloadditions have been made, but exceptional and tunable diastereoselectivity and regioselectivity (head-to-head versus head-to-tail adducts) is required for the synthesis of bioactive molecules. Here we show that colloidal quantum dots serve as visible-light chromophores, photocatalysts and reusable scaffolds for homo- and hetero-intermolecular [2+2] photocycloadditions of 4-vinylbenzoic acid derivatives, including aryl-conjugated alkenes, with up to 98% switchable regioselectivity and 98% diastereoselectivity for the previously minor syn-cyclobutane products. Transient absorption spectroscopy confirms that our system demonstrates catalysis triggered by triplet-triplet energy transfer from the quantum dot. The precisely controlled triplet energy levels of the quantum dot photocatalysts facilitate efficient and selective heterocoupling, a major challenge in direct cyclobutane synthesis.
RESUMO
This paper describes the use of electrostatic assemblies of negatively charged colloidal CuInS2/ZnS quantum dot (QD) sensitizers and positively charged, trimethylamino-functionalized iron tetraphenylporphyrin catalysts (FeTMA) to photoreduce CO2 to CO in water upon illumination with 450 nm light. This system achieves a turnover number (TON) of CO (per FeTMA) of 450 after 30 h of illumination, with a selectivity of 99%. Its sensitization efficiency (TON per Joule of photons absorbed) is a factor of 11 larger than the previous record for photosensitization of an iron porphyrin catalyst for this reaction, held by a system in which both QDs and metal porphyrin were uncharged. Steady-state and time-resolved optical spectroscopy provides evidence for electrostatic assembly of QDs and FeTMA. Control of the size of the assemblies with addition of a screening counterion, K+, and a correlation between their measured size and their catalytic activity, indicates that the enhancement in performance of this system over the analogous uncharged system is due to the proximity of the FeTMA catalyst to multiple light-absorbing QDs and the selective formation of QD-FeTMA contacts (rather than QD-QD or FeTMA-FeTMA contacts). This system therefore shows the ability to funnel photoinduced electrons to a reaction center, which is crucial for carrying out reactions that require multistep redox processes under low photon flux, and thus is an important advance in developing artificial photocatalytic systems that function in natural light.
RESUMO
Reversible coupling of glutathione-capped PbS quantum dots through coordination with Zn2+ cations forms water-soluble aggregates. These assemblies mediate multi-step hopping of near-infrared excitons through unity-quantum yield Förster resonance energy transfer. The photoluminescence spectra from these samples are sensitive indicators of average interparticle distance.
RESUMO
This paper describes control of the rate constant for near-infrared excitonic energy transfer (EnT) within soluble aqueous assemblies of PbS quantum dots, cross-linked by Zn2+, by changing the length of the mercapto-alkanoic acid (MAA) that serves as the cross-linking ligand. Sequestration of Zn2+ by a chelating agent or zinc hydroxide species results in deaggregation of the assemblies with EnT turned "off". Upon decreasing the number of methylene groups in MAAs from 16 to 3, the interparticle separation decreases from 5.8 nm to 3.7 nm and the average observed EnT rate increases from â¼(150 ns)-1 to â¼(2 ns)-1. A master equation translates intrinsic (single-donor-single-acceptor) EnT rate constants predicted for each ligand length using Förster theory to observed average rate constants. For interparticle distances greater than â¼4 nm, the point dipole approximation (PDA) implementation of Förster theory agrees with experimentally measured rates. At shorter interparticle distances, the PDA drastically underestimates the observed EnT rate. The prediction of the rates of these short-distance EnT processes is improved by â¼20% by replacing the PDA with a transition density cube calculation of the interparticle Coulombic coupling.
RESUMO
This paper describes the pH dependence of the excitonic energies and dynamics of CdS quantum dots (QDs) capped with phosphonopropionate (PPA) in water. QDs capped with PPA carry a negative charge on their surfaces upon deprotonation of PPA above pH â¼ 8.5; the resultant electric field induces large changes in the QD's optical properties. Between pH 5.6 and 12.0, an increase in pH is accompanied by a 47-meV bathochromic shift in the bandgap of the QDs and a decrease in the Stokes shift by â¼4.3 meV/pH unit. An increase in the radiative recombination rate by a factor of 20.9 occurs on increasing the pH from 5.6 to 9.4. These observations are attributed to a shifting of the energy levels within the first exciton manifold, and are simulated using time-dependent density functional theory calculations on model Cd29S29 clusters surrounded by point charges.
RESUMO
This paper describes the enhancement of the rate of hole transfer from a photoexcited CdS quantum dot (QD), with radius R = 2.0 nm, to a molecular acceptor, phenothiazine (PTZ), by linking the donor and acceptor through a phenyldithiocarbamate (PTC) linker, which is known to lower the confinement energy of the excitonic hole. Upon adsorption of PTC, the bandgap of the QD decreases due to delocalization of the exciton, primarily the excitonic hole, into interfacial states of mixed QD/PTC character. This delocalization enables hole transfer from the QD to PTZ in <300 fs (within the instrument response of the laser system) when linked by PTC, but not when linked by a benzoate group, which has a similar length and conjugation as PTC but does not delocalize the excitonic hole. Comparison of the two systems was aided by quantification of the surface coverage of benzoate and PTC-linked PTZ by (1)H NMR. This work provides direct spectroscopic evidence of the enhancement of the rate of hole extraction from a colloidal QD through covalent linkage of a hole acceptor through an exciton-delocalizing ligand.