A self-stiffening compliant intracortical microprobe.

Utilising a flexible intracortical microprobe to record/stimulate neurons minimises the incompatibility between the implanted microprobe and the brain, reducing tissue damage due to the brain micromotion. Applying bio-dissolvable coating materials temporarily makes a flexible microprobe stiff to tolerate the penetration force during insertion. However, the inability to adjust the dissolving time after the microprobe contact with the cerebrospinal fluid may lead to inaccuracy in the microprobe positioning. Furthermore, since the dissolving process is irreversible, any subsequent positioning error cannot be corrected by re-stiffening the microprobe. The purpose of this study is to propose an intracortical microprobe that incorporates two compressible structures to make the microprobe both adaptive to the brain during operation and stiff during insertion. Applying a compressive force by an inserter compresses the two compressible structures completely, resulting in increasing the equivalent elastic modulus. Thus, instant switching between stiff and soft modes can be accomplished as many times as necessary to ensure high-accuracy positioning while causing minimal tissue damage. The equivalent elastic modulus of the microprobe during operation is ≈ 23 kPa, which is ≈ 42% less than the existing counterpart, resulting in ≈ 46% less maximum strain generated on the surrounding tissue under brain longitudinal motion. The self-stiffening microprobe and surrounding neural tissue are simulated during insertion and operation to confirm the efficiency of the design. Two-photon polymerisation technology is utilised to 3D print the proposed microprobe, which is experimentally validated and inserted into a lamb's brain without buckling.

Anti-manic effect of deep brain stimulation of the ventral tegmental area in an animal model of mania induced by methamphetamine.

BACKGROUND: Treatment of refractory bipolar disorder (BD) is extremely challenging. Deep brain stimulation (DBS) holds promise as an effective treatment intervention. However, we still understand very little about the mechanisms of DBS and its application on BD. AIM: The present study aimed to investigate the behavioural and neurochemical effects of ventral tegmental area (VTA) DBS in an animal model of mania induced by methamphetamine (m-amph). METHODS: Wistar rats were given 14 days of m-amph injections, and on the last day, animals were submitted to 20 min of VTA DBS in two different patterns: intermittent low-frequency stimulation (LFS) or continuous high-frequency stimulation (HFS). Immediately after DBS, manic-like behaviour and nucleus accumbens (NAc) phasic dopamine (DA) release were evaluated in different groups of animals through open-field tests and fast-scan cyclic voltammetry. Levels of NAc dopaminergic markers were evaluated by immunohistochemistry. RESULTS: M-amph induced hyperlocomotion in the animals and both DBS parameters reversed this alteration. M-amph increased DA reuptake time post-sham compared to baseline levels, and both LFS and HFS were able to block this alteration. LFS was also able to reduce phasic DA release when compared to baseline. LFS was able to increase dopamine transporter (DAT) expression in the NAc. CONCLUSION: These results demonstrate that both VTA LFS and HFS DBS exert anti-manic effects and modulation of DA dynamics in the NAc. More specifically the increase in DA reuptake driven by increased DAT expression may serve as a potential mechanism by which VTA DBS exerts its anti-manic effects.

Dual core photonic crystal fiber based plasmonic refractive index sensor with ultra-wide detection range.

In this study, an ultra-wide range plasmonic refractive index sensor based on dual core photonic crystal fiber is suggested and analyzed numerically. The proposed design achieves fabrication feasibility by employing external sensing mechanism in which silver is deposited onto the flat outer surface of the fiber as plasmonic material. A thin layer of titanium oxide (TiO2) is considered on top of the silver layer for preventing its oxidation problem. The sensor attains identification of a vast array of analytes consisting a wide range of refractive indices of 1.10 - 1.45. It achieves a maximum spectral sensitivity of 24300 nm/RIU along with its corresponding resolution of 4.12 × 10-6 RIU. The maximum figure of merit of the sensor is 120 RIU-1. The sensor also supports amplitude interrogation approach and exhibits a maximum amplitude sensitivity of 172 RIU-1. The impact of the design parameters such as radius of air holes, polishing distance, thickness of silver and titanium oxide layers are investigated thoroughly. An ultra-wide detection range with high sensitivity, fabrication feasibility, and easy application make the sensor a potential candidate for detection of a wide array of bio-originated materials, chemicals, and other analytes.

Comparative study and multi-parameter analysis to optimize device structure of triboelectric nanogenerators.

Triboelectric nanogenerator is becoming one of the most efficient energy harvesting device among all mechanical energy harvesters. This device consists of dielectric friction layers and metal electrode which generates electrical charges using electrostatic induction effect. There are several factors influencing the performance of this generator which needs to be evaluated prior to experiment. The absence of a universal technique for TENG simulation makes the device design and optimization hard before practical fabrication, which also lengthens the exploration and advancement cycle and hinders the arrival of practical applications. In order to deepen the understanding the core physic behind the working process of this device, this work will provide comparative analysis on different modes of TENG. Systematic investigation on different material combination, effect of material thickness, dielectric constant and impact of surface patterning is evaluated to shortlist the best material combination. COMSOL Multiphysics simulating environment is used to design, model and analyze factor affecting the overall output performance of TENG. The stationary study in this simulator is performed using 2D geometry structure with higher mesh density. During this study short circuit and open circuit condition were applied to observe the behavior of charge and electric potential produced. This observation is analyzed by plotting charge transfer/electric potential against various displacement distances of dielectric friction layers. The ouput is then provided to load ciruitary to measure the maximum output power of the models. Overall, this study provides an excellent understanding and multi-parameter analysis on basic theoretical and simulation modeling of TENG device.

Starch-g-Acrylic Acid/Magnetic Nanochitin Self-Healing Ferrogels as Flexible Soft Strain Sensors.

Mechanically robust ferrogels with high self-healing ability might change the design of soft materials used in strain sensing. Herein, a robust, stretchable, magneto-responsive, notch insensitive, ionic conductive nanochitin ferrogel was fabricated with both autonomous self-healing and needed resilience for strain sensing application without the need for additional irreversible static chemical crosslinks. For this purpose, ferric (III) chloride hexahydrate and ferrous (II) chloride as the iron source were initially co-precipitated to create magnetic nanochitin and the co-precipitation was confirmed by FTIR and microscopic images. After that, the ferrogels were fabricated by graft copolymerisation of acrylic acid-g-starch with a monomer/starch weight ratio of 1.5. Ammonium persulfate and magnetic nanochitin were employed as the initiator and crosslinking/nano-reinforcing agents, respectively. The ensuing magnetic nanochitin ferrogel provided not only the ability to measure strain in real-time under external magnetic actuation but also the ability to heal itself without any external stimulus. The ferrogel may also be used as a stylus for a touch-screen device. Based on our findings, our research has promising implications for the rational design of multifunctional hydrogels, which might be used in applications such as flexible and soft strain sensors, health monitoring, and soft robotics.

Cocaine increases stimulation-evoked serotonin efflux in the nucleus accumbens.

Although dopamine is the most implicated neurotransmitter in the mediation of the pathophysiology of addiction, animal studies show serotonin also plays a vital role. Cocaine is one of the most common illicit drugs globally, but the role of serotonin in its mechanism of action is insufficiently characterized. Consequently, we investigated the acute effects of the psychomotor stimulant cocaine on electrical stimulation-evoked serotonin (phasic) release in the nucleus accumbens core (NAcc) of urethane-anesthetized (1.5 g/kg ip) male Sprague-Dawley rats using N-shaped fast-scan cyclic voltammetry (N-FSCV). A single carbon fiber microelectrode was first implanted in the NAcc. Stimulation was applied to the medial forebrain bundle using 60 Hz, 2 ms, 0.2 mA, 2-s biphasic pulses before and after cocaine (2 mg/kg iv) was administered. Stimulation-evoked serotonin release significantly increased 5 min after cocaine injection compared with baseline (153 ± 21 nM vs. 257 ± 12 nM; P = 0.0042; n = 5) but was unaffected by saline injection (1 mL/kg iv; n = 5). N-FSCV's selective measurement of serotonin release in vivo was confirmed pharmacologically via administration of the selective serotonin reuptake inhibitor escitalopram (10 mg/kg ip) that effectively increased the signal in a separate group of rats (n = 5). Selectivity to serotonin was further confirmed in vitro in which dopamine was minimally detected by N-FSCV with a serotonin to dopamine response ratio of 1:0.04 (200 nM of serotonin:1 µM dopamine ratio; P = 0.0048; n = 5 electrodes). This study demonstrates a noteworthy influence of cocaine on serotonin dynamics, and confirms that N-FSCV can effectively and selectively measure phasic serotonin release in the NAcc.NEW & NOTEWORTHY Serotonin plays a vital role in drug addiction. Here, using N-shaped fast-scan cyclic voltammetry, we demonstrated the effect of cocaine on the phasic release of serotonin at the nucleus accumbens core. To the best of our knowledge, this has not previously been elucidated. Our results not only reinforce the role of serotonin in the mechanism of action of cocaine but also help to fill a gap in our knowledge and provide a baseline for future studies in cocaine addiction.

Advancements in Algorithms and Neuromorphic Hardware for Spiking Neural Networks.

Artificial neural networks (ANNs) have experienced a rapid advancement for their success in various application domains, including autonomous driving and drone vision. Researchers have been improving the performance efficiency and computational requirement of ANNs inspired by the mechanisms of the biological brain. Spiking neural networks (SNNs) provide a power-efficient and brain-inspired computing paradigm for machine learning applications. However, evaluating large-scale SNNs on classical von Neumann architectures (central processing units/graphics processing units) demands a high amount of power and time. Therefore, hardware designers have developed neuromorphic platforms to execute SNNs in and approach that combines fast processing and low power consumption. Recently, field-programmable gate arrays (FPGAs) have been considered promising candidates for implementing neuromorphic solutions due to their varied advantages, such as higher flexibility, shorter design, and excellent stability. This review aims to describe recent advances in SNNs and the neuromorphic hardware platforms (digital, analog, hybrid, and FPGA based) suitable for their implementation. We present that biological background of SNN learning, such as neuron models and information encoding techniques, followed by a categorization of SNN training. In addition, we describe state-of-the-art SNN simulators. Furthermore, we review and present FPGA-based hardware implementation of SNNs. Finally, we discuss some future directions for research in this field.

Using Adaptive Sensors for Optimised Target Coverage in Wireless Sensor Networks.

Innovation in wireless communications and microtechnology has progressed day by day, and this has resulted in the creation of wireless sensor networks. This technology is utilised in a variety of settings, including battlefield surveillance, home security, and healthcare monitoring, among others. However, since tiny batteries with very little power are used, this technology has power and target monitoring issues. With the development of various architectures and algorithms, considerable research has been done to address these problems. The adaptive learning automata algorithm (ALAA) is a scheduling machine learning method that is utilised in this study. It offers a time-saving scheduling method. As a result, each sensor node in the network has been outfitted with learning automata, allowing them to choose their appropriate state at any given moment. The sensor is in one of two states: active or sleep. Several experiments were conducted to get the findings of the suggested method. Different parameters are utilised in this experiment to verify the consistency of the method for scheduling the sensor node so that it can cover all of the targets while using less power. The experimental findings indicate that the proposed method is an effective approach to schedule sensor nodes to monitor all targets while using less electricity. Finally, we have benchmarked our technique against the LADSC scheduling algorithm. All of the experimental data collected thus far demonstrate that the suggested method has justified the problem description and achieved the project's aim. Thus, while constructing an actual sensor network, our suggested algorithm may be utilised as a useful technique for scheduling sensor nodes.

Design of a Highly Efficient Wideband Multi-Frequency Ambient RF Energy Harvester.

For low input radio frequency (RF) power from -35 to 5 dBm, a novel quad-band RF energy harvester (RFEH) with an improved impedance matching network (IMN) is proposed to overcome the poor conversion efficiency and limited RF power range of the ambient environment. In this research, an RF spectral survey was performed in the semi-urban region of Malaysia, and using these results, a multi-frequency highly sensitive RF energy harvester was designed to harvest energy from available frequency bands within the 0.8 GHz to 2.6 GHz frequency range. Firstly, a new IMN is implemented to improve the rectifying circuit's efficiency in ambient conditions. Secondly, a self-complementary log-periodic higher bandwidth antenna is proposed. Finally, the design and manufacture of the proposed RF harvester's prototype are carried out and tested to realize its output in the desired frequency bands. For an accumulative -15 dBm input RF power that is uniformly universal across the four radio frequency bands, the harvester's calculated dc rectification efficiency is about 35 percent and reaches 52 percent at -20 dBm. Measurement in an ambient RF setting shows that the proposed harvester is able to harvest dc energy at -20 dBm up to 0.678 V.

Automatic Target Detection from Satellite Imagery Using Machine Learning.

Object detection is a vital step in satellite imagery-based computer vision applications such as precision agriculture, urban planning and defense applications. In satellite imagery, object detection is a very complicated task due to various reasons including low pixel resolution of objects and detection of small objects in the large scale (a single satellite image taken by Digital Globe comprises over 240 million pixels) satellite images. Object detection in satellite images has many challenges such as class variations, multiple objects pose, high variance in object size, illumination and a dense background. This study aims to compare the performance of existing deep learning algorithms for object detection in satellite imagery. We created the dataset of satellite imagery to perform object detection using convolutional neural network-based frameworks such as faster RCNN (faster region-based convolutional neural network), YOLO (you only look once), SSD (single-shot detector) and SIMRDWN (satellite imagery multiscale rapid detection with windowed networks). In addition to that, we also performed an analysis of these approaches in terms of accuracy and speed using the developed dataset of satellite imagery. The results showed that SIMRDWN has an accuracy of 97% on high-resolution images, while Faster RCNN has an accuracy of 95.31% on the standard resolution (1000 × 600). YOLOv3 has an accuracy of 94.20% on standard resolution (416 × 416) while on the other hand SSD has an accuracy of 84.61% on standard resolution (300 × 300). When it comes to speed and efficiency, YOLO is the obvious leader. In real-time surveillance, SIMRDWN fails. When YOLO takes 170 to 190 milliseconds to perform a task, SIMRDWN takes 5 to 103 milliseconds.

A Smart Camera Trap for Detection of Endotherms and Ectotherms.

Current camera traps use passive infrared triggers; therefore, they only capture images when animals have a substantially different surface body temperature than the background. Endothermic animals, such as mammals and birds, provide adequate temperature contrast to trigger cameras, while ectothermic animals, such as amphibians, reptiles, and invertebrates, do not. Therefore, a camera trap that is capable of monitoring ectotherms can expand the capacity of ecological research on ectothermic animals. This study presents the design, development, and evaluation of a solar-powered and artificial-intelligence-assisted camera trap system with the ability to monitor both endothermic and ectothermic animals. The system is developed using a central processing unit, integrated graphics processing unit, camera, infrared light, flash drive, printed circuit board, solar panel, battery, microphone, GPS receiver, temperature/humidity sensor, light sensor, and other customized circuitry. It continuously monitors image frames using a motion detection algorithm and commences recording when a moving animal is detected during the day or night. Field trials demonstrate that this system successfully recorded a high number of animals. Lab testing using artificially generated motion demonstrated that the system successfully recorded within video frames at a high accuracy of 0.99, providing an optimized peak power consumption of 5.208 W. No water or dust entered the cases during field trials. A total of 27 cameras saved 85,870 video segments during field trials, of which 423 video segments successfully recorded ectothermic animals (reptiles, amphibians, and arthropods). This newly developed camera trap will benefit wildlife biologists, as it successfully monitors both endothermic and ectothermic animals.

Biomarkers for Deep Brain Stimulation in Animal Models of Depression.

OBJECTIVES: Despite recent advances in depression treatment, many patients still do not respond to serial conventional therapies and are considered "treatment resistant." Deep brain stimulation (DBS) has therapeutic potential in this context. This comprehensive review of recent studies of DBS for depression in animal models identifies potential biomarkers for improving therapeutic efficacy and predictability of conventional DBS to aid future development of closed-loop control of DBS systems. MATERIALS AND METHODS: A systematic search was performed in Pubmed, EMBASE, and Cochrane Review using relevant keywords. Overall, 56 animal studies satisfied the inclusion criteria. RESULTS: Outcomes were divided into biochemical/physiological, electrophysiological, and behavioral categories. Promising biomarkers include biochemical assays (in particular, microdialysis and electrochemical measurements), which provide real-time results in awake animals. Electrophysiological tests, showing changes at both the target site and downstream structures, also revealed characteristic changes at several anatomic targets (such as the medial prefrontal cortex and locus coeruleus). However, the substantial range of models and DBS targets limits the ability to draw generalizable conclusions in animal behavioral models. CONCLUSIONS: Overall, DBS is a promising therapeutic modality for treatment-resistant depression. Different outcomes have been used to assess its efficacy in animal studies. From the review, electrophysiological and biochemical markers appear to offer the greatest potential as biomarkers for depression. However, to develop closed-loop DBS for depression, additional preclinical and clinical studies with a focus on identifying reliable, safe, and effective biomarkers are warranted.

Dynamic Nanohybrid-Polysaccharide Hydrogels for Soft Wearable Strain Sensing.

Electroconductive hydrogels with stimuli-free self-healing and self-recovery (SELF) properties and high mechanical strength for wearable strain sensors is an area of intensive research activity at the moment. Most electroconductive hydrogels, however, consist of static bonds for mechanical strength and dynamic bonds for SELF performance, presenting a challenge to improve both properties into one single hydrogel. An alternative strategy to successfully incorporate both properties into one system is via the use of stiff or rigid, yet dynamic nano-materials. In this work, a nano-hybrid modifier derived from nano-chitin coated with ferric ions and tannic acid (TA/Fe@ChNFs) is blended into a starch/polyvinyl alcohol/polyacrylic acid (St/PVA/PAA) hydrogel. It is hypothesized that the TA/Fe@ChNFs nanohybrid imparts both mechanical strength and stimuli-free SELF properties to the hydrogel via dynamic catecholato-metal coordination bonds. Additionally, the catechol groups of TA provide mussel-inspired adhesion properties to the hydrogel. Due to its electroconductivity, toughness, stimuli-free SELF properties, and self-adhesiveness, a prototype soft wearable strain sensor is created using this hydrogel and subsequently tested.

Cloud- and Fog-Integrated Smart Grid Model for Efficient Resource Utilisation.

The smart grid (SG) is a contemporary electrical network that enhances the network's performance, reliability, stability, and energy efficiency. The integration of cloud and fog computing with SG can increase its efficiency. The combination of SG with cloud computing enhances resource allocation. To minimise the burden on the Cloud and optimise resource allocation, the concept of fog computing integration with cloud computing is presented. Fog has three essential functionalities: location awareness, low latency, and mobility. We offer a cloud and fog-based architecture for information management in this study. By allocating virtual machines using a load-balancing mechanism, fog computing makes the system more efficient (VMs). We proposed a novel approach based on binary particle swarm optimisation with inertia weight adjusted using simulated annealing. The technique is named BPSOSA. Inertia weight is an important factor in BPSOSA which adjusts the size of the search space for finding the optimal solution. The BPSOSA technique is compared against the round robin, odds algorithm, and ant colony optimisation. In terms of response time, BPSOSA outperforms round robin, odds algorithm, and ant colony optimisation by 53.99 ms, 82.08 ms, and 81.58 ms, respectively. In terms of processing time, BPSOSA outperforms round robin, odds algorithm, and ant colony optimisation by 52.94 ms, 81.20 ms, and 80.56 ms, respectively. Compared to BPSOSA, ant colony optimisation has slightly better cost efficiency, however, the difference is insignificant.

Photovoltaic Panels Classification Using Isolated and Transfer Learned Deep Neural Models Using Infrared Thermographic Images.

Defective PV panels reduce the efficiency of the whole PV string, causing loss of investment by decreasing its efficiency and lifetime. In this study, firstly, an isolated convolution neural model (ICNM) was prepared from scratch to classify the infrared images of PV panels based on their health, i.e., healthy, hotspot, and faulty. The ICNM occupies the least memory, and it also has the simplest architecture, lowest execution time, and an accuracy of 96% compared to transfer learned pre-trained ShuffleNet, GoogleNet, and SqueezeNet models. Afterward, ICNM, based on its advantages, is reused through transfer learning to classify the defects of PV panels into five classes, i.e., bird drop, single, patchwork, horizontally aligned string, and block with 97.62% testing accuracy. This proposed approach can identify and classify the PV panels based on their health and defects faster with high accuracy and occupies the least amount of the system's memory, resulting in savings in the PV investment.

Cluster Analysis and Model Comparison Using Smart Meter Data.

Load forecasting plays a crucial role in the world of smart grids. It governs many aspects of the smart grid and smart meter, such as demand response, asset management, investment, and future direction. This paper proposes time-series forecasting for short-term load prediction to unveil the load forecast benefits through different statistical and mathematical models, such as artificial neural networks, auto-regression, and ARIMA. It targets the problem of excessive computational load when dealing with time-series data. It also presents a business case that is used to analyze different clusters to find underlying factors of load consumption and predict the behavior of customers based on different parameters. On evaluating the accuracy of the prediction models, it is observed that ARIMA models with the (P, D, Q) values as (1, 1, 1) were most accurate compared to other values.

Quad-Band Rectenna for Ambient Radio Frequency (RF) Energy Harvesting.

RF power is broadly available in both urban and semi-urban areas and thus exhibits as a promising candidate for ambient energy scavenging sources. In this research, a high-efficiency quad-band rectenna is designed for ambient RF wireless energy scavenging over the frequency range from 0.8 to 2.5 GHz. Firstly, the detailed characteristics (i.e., available frequency bands and associated power density levels) of the ambient RF power are studied and analyzed. The data (i.e., RF survey results) are then applied to aid the design of a new quad-band RF harvester. A newly designed impedance matching network (IMN) with an additional L-network in a third-branch of dual-port rectifier circuit is familiarized to increase the performance and RF-to-DC conversion efficiency of the harvester with comparatively very low input RF power density levels. A dual-polarized multi-frequency bow-tie antenna is designed, which has a wide bandwidth (BW) and is miniature in size. The dual cross planer structure internal triangular shape and co-axial feeding are used to decrease the size and enhance the antenna performance. Consequently, the suggested RF harvester is designed to cover all available frequency bands, including part of most mobile phone and wireless local area network (WLAN) bands in Malaysia, while the optimum resistance value for maximum dc rectification efficiency (up to 48%) is from 1 to 10 kΩ. The measurement result in the ambient environment (i.e., both indoor and outdoor) depicts that the new harvester is able to harvest dc voltage of 124.3 and 191.0 mV, respectively, which can be used for low power sensors and wireless applications.

Design and Optimization of ECG Modeling for Generating Different Cardiac Dysrhythmias.

The electrocardiogram (ECG) has significant clinical importance for analyzing most cardiovascular diseases. ECGs beat morphologies, beat durations, and amplitudes vary from subject to subject and diseases to diseases. Therefore, ECG morphology-based modeling has long-standing research interests. This work aims to develop a simplified ECG model based on a minimum number of parameters that could correctly represent ECG morphology in different cardiac dysrhythmias. A simple mathematical model based on the sum of two Gaussian functions is proposed. However, fitting more than one Gaussian function in a deterministic way has accuracy and localization problems. To solve these fitting problems, two hybrid optimization methods have been developed to select the optimal ECG model parameters. The first method is the combination of an approximation and global search technique (ApproxiGlo), and the second method is the combination of an approximation and multi-start search technique (ApproxiMul). The proposed model and optimization methods have been applied to real ECGs in different cardiac dysrhythmias, and the effectiveness of the model performance was measured in time, frequency, and the time-frequency domain. The model fit different types of ECG beats representing different cardiac dysrhythmias with high correlation coefficients (>0.98). Compared to the nonlinear fitting method, ApproxiGlo and ApproxiMul are 3.32 and 7.88 times better in terms of root mean square error (RMSE), respectively. Regarding optimization, the ApproxiMul performs better than the ApproxiGlo method in many metrics. Different uses of this model are possible, such as a syntactic ECG generator using a graphical user interface has been developed and tested. In addition, the model can be used as a lossy compression with a variable compression rate. A compression ratio of 20:1 can be achieved with 1 kHz sampling frequency and 75 beats per minute. These optimization methods can be used in different engineering fields where the sum of Gaussians is used.

Design and Numerical Analysis of a Graphene-Coated SPR Biosensor for Rapid Detection of the Novel Coronavirus.

In this paper, a highly sensitive graphene-based multiple-layer (BK7/Au/PtSe2/Graphene) coated surface plasmon resonance (SPR) biosensor is proposed for the rapid detection of the novel Coronavirus (COVID-19). The proposed sensor was modeled on the basis of the total internal reflection (TIR) technique for real-time detection of ligand-analyte immobilization in the sensing region. The refractive index (RI) of the sensing region is changed due to the interaction of different concentrations of the ligand-analyte, thus impacting surface plasmon polaritons (SPPs) excitation of the multi-layer sensor interface. The performance of the proposed sensor was numerically investigated by using the transfer matrix method (TMM) and the finite-difference time-domain (FDTD) method. The proposed SPR biosensor provides fast and accurate early-stage diagnosis of the COVID-19 virus, which is crucial in limiting the spread of the pandemic. In addition, the performance of the proposed sensor was investigated numerically with different ligand-analytes: (i) the monoclonal antibodies (mAbs) as ligand and the COVID-19 virus spike receptor-binding domain (RBD) as analyte, (ii) the virus spike RBD as ligand and the virus anti-spike protein (IgM, IgG) as analyte and (iii) the specific probe as ligand and the COVID-19 virus single-standard ribonucleic acid (RNA) as analyte. After the investigation, the sensitivity of the proposed sensor was found to provide 183.33°/refractive index unit (RIU) in SPR angle (θSPR) and 833.33THz/RIU in SPR frequency (SPRF) for detection of the COVID-19 virus spike RBD; the sensitivity obtained 153.85°/RIU in SPR angle and 726.50THz/RIU in SPRF for detection of the anti-spike protein, and finally, the sensitivity obtained 140.35°/RIU in SPR angle and 500THz/RIU in SPRF for detection of viral RNA. It was observed that whole virus spike RBD detection sensitivity is higher than that of the other two detection processes. Highly sensitive two-dimensional (2D) materials were used to achieve significant enhancement in the Goos-Hänchen (GH) shift detection sensitivity and plasmonic properties of the conventional SPR sensor. The proposed sensor successfully senses the COVID-19 virus and offers additional (1 + 0.55) × L times sensitivity owing to the added graphene layers. Besides, the performance of the proposed sensor was analyzed based on detection accuracy (DA), the figure of merit (FOM), signal-noise ratio (SNR), and quality factor (QF). Based on its performance analysis, it is expected that the proposed sensor may reduce lengthy procedures, false positive results, and clinical costs, compared to traditional sensors. The performance of the proposed sensor model was checked using the TMM algorithm and validated by the FDTD technique.

Rational Design of Mussel-Inspired Hydrogels with Dynamic Catecholato-Metal Coordination Bonds.

Nature has often been the main source of inspiration for designing smart functional materials. As an example, mussels can attach to almost any wet surfaces, for example, wood, rocks, metal, etc., due to the presence of catechols containing amino acid 3,4-dihydroxyphenyl-l-alanine (DOPA). Fabrication of mussel-inspired hydrogels using dynamic catecholato-metal coordination bonds has recently been in the limelight because of the hydrogels' ease of gelation, interesting self-healing, self-recovery, adhesiveness, and pH-responsiveness, as well as shear-thinning and mechanical properties. Mussel inspired hydrogels take advantage of catechols, for example, DOPA in the blue mussel, to undergo catecholatometal gelation through coordination chemistry. This review explores the latest developments in the fabrication of such hydrogels using catecholato-metal coordination bonds, and discusses their potential applications in sensors, flexible electronics, tissue engineering, and wound dressing. Moreover, current challenges and prospects of such hydrogels are discussed. The main focus of this paper is on providing a deeper understanding of this growing field in terms of chemistry, physics, and associated properties.