Rates and Mechanism of Vivianite Dissolution under Anoxic Conditions.

The iron phosphate mineral vivianite Fe(II)3(PO4)2·8H2O has emerged as a potential renewable P source. Although the importance of vivianite as a potential P sink in the global P cycle had previously been recognized, a mechanistic understanding of vivianite dissolution at the molecular level, critical to its potential application, is still elusive. The potential of vivianite as a P sink or source in natural or engineered systems is directly dependent on its dissolution kinetics under environmentally relevant conditions. To understand the thermodynamic and kinetic controls on bioavailability, the oxidation and dissolution processes of vivianite must be disentangled. In this study, we conducted controlled batch and flow-through experiments to quantitatively determine the dissolution rates and mechanisms of vivianite under anoxic conditions as a function of pH and temperature. Our results demonstrate that vivianite solubility and dissolution rates strongly decreased with increasing solution pH. Dissolution was nonstoichiometric at alkaline pH (>7). The rapid initial dissolution rate of vivianite is related to the solution saturation state, indicating a thermodynamic rather than a kinetic control. A defect-driven dissolution mechanism is proposed. Dissolution kinetics over pH 5-9 could be described with a rate law with a single rate constant and a reaction order of 0.61 with respect to {H+}: Rexp=36.0·e-1.41·pH·[1-e(0.2·ΔG/RT)]4.7 The activation energy of vivianite dissolution proved low (Ea = 20.3 kJ mol-1), suggesting hydrogen bridge dissociation as the rate-determining step.

Effect of Competing Metals and Humic Substances on Uranium Mobilization from Noncrystalline U(IV) Induced by Anthropogenic and Biogenic Ligands.

Anthropogenic and biogenic ligands may mobilize uranium (U) from tetravalent U (U(IV)) phases in the subsurface, especially from labile noncrystalline U(IV). The rate and extent of U(IV) mobilization are affected by geochemical processes. Competing metals and humic substances may play a decisive role in U mobilization by anthropogenic and biogenic ligands. A structurally diverse set of anthropogenic and biogenic ligands was selected for assessing the effect of the aforementioned processes on U mobilization from noncrystalline U(IV), including 2,6-pyridinedicarboxylic acid (DPA), citrate, N,N'-di(2-hydroxybenzyl)ethylene-diamine-N,N'-diacetic acid (HBED), and desferrioxamine B (DFOB). All experiments were performed under anoxic conditions at pH 7.0. The effect of competing metals (Ca, Fe(III), and Zn) on ligand-induced U mobilization depended on the particular metal-ligand combination ranging from nearly complete U mobilization inhibition (e.g., Ca-citrate) to no apparent inhibitory effects or acceleration of U mobilization (e.g., Fe(III)-citrate). Humic substances (Suwannee River humic acid and fulvic acid) were tested across a range of concentrations either separately or combined with the aforementioned ligands. Humic substances alone mobilized appreciable U and also enhanced U mobilization in the presence of anthropogenic or biogenic ligands. These findings illustrate the complex influence of competing metals and humic substances on U mobilization by anthropogenic and biogenic ligands in the environment.

Mercury Isotope Fractionation during Dark Abiotic Reduction of Hg(II) by Dissolved, Surface-Bound, and Structural Fe(II).

Stable mercury (Hg) isotope ratios are an emerging tracer for biogeochemical transformations in environmental systems, but their application requires knowledge of isotopic enrichment factors for individual processes. We investigated Hg isotope fractionation during dark, abiotic reduction of Hg(II) by dissolved iron(Fe)(II), magnetite, and Fe(II) sorbed to boehmite or goethite by analyzing both the reactants and products of laboratory experiments. For homogeneous reduction of Hg(II) by dissolved Fe(II) in continuously purged reactors, the results followed a Rayleigh distillation model with enrichment factors of -2.20 ± 0.16‰ (ε202Hg) and 0.21 ± 0.02‰ (E199Hg). In closed system experiments, allowing reequilibration, the initial kinetic fractionation was overprinted by isotope exchange and followed a linear equilibrium model with -2.44 ± 0.17‰ (ε202Hg) and 0.34 ± 0.02‰ (E199Hg). Heterogeneous Hg(II) reduction by magnetite caused a smaller isotopic fractionation (-1.38 ± 0.07 and 0.13 ± 0.01‰), whereas the extent of isotopic fractionation of the sorbed Fe(II) experiments was similar to the kinetic homogeneous case. Small mass-independent fractionation of even-mass Hg isotopes with 0.02 ± 0.003‰ (E200Hg) and ≈ -0.02 ± 0.01‰ (E204Hg) was consistent with theoretical predictions for the nuclear volume effect. This study contributes significantly to the database of Hg isotope enrichment factors for specific processes. Our findings show that Hg(II) reduction by dissolved Fe(II) in open systems results in a kinetic MDF with a larger ε compared to other abiotic reduction pathways, and combining MDF with the observed MIF allows the distinction from photochemical or microbial Hg(II) reduction pathways.

Three-dimensional ultrastructure of Plasmodium falciparum throughout cytokinesis.

New techniques for obtaining electron microscopy data through the cell volume are being increasingly utilized to answer cell biologic questions. Here, we present a three-dimensional atlas of Plasmodium falciparum ultrastructure throughout parasite cell division. Multiple wild type schizonts at different stages of segmentation, or budding, were imaged and rendered, and the 3D structure of their organelles and daughter cells are shown. Our high-resolution volume electron microscopy both confirms previously described features in 3D and adds new layers to our understanding of Plasmodium nuclear division. Interestingly, we demonstrate asynchrony of the final nuclear division, a process that had previously been reported as synchronous. Use of volume electron microscopy techniques for biological imaging is gaining prominence, and there is much we can learn from applying them to answer questions about Plasmodium cell biology. We provide this resource to encourage readers to consider adding these techniques to their cell biology toolbox.

The Potential Contribution of Hexavalent Chromium to the Carcinogenicity of Chrysotile Asbestos.

Chrysotile asbestos is a carcinogenic mineral that has abundantly been used in industrial and consumer applications. The carcinogenicity of the fibers is partly governed by reactive Fe surface sites that catalyze the generation of highly toxic hydroxyl radicals (HO•) from extracellular hydrogen peroxide (H2O2). Chrysotile also contains Cr, typically in the low mass permille range. In this study, we examined the leaching of Cr from fibers at the physiological lung pH of 7.4 in the presence and absence of H2O2. Furthermore, we investigated the potential of cells from typical asbestos-burdened tissues and cancers to take up Cr leached from chrysotile in PCR expression, immunoblot, and cellular Cr uptake experiments. Finally, the contribution of Cr to fiber-mediated H2O2 decomposition and HO• generation was studied. Chromium readily dissolved from chrysotile fibers in its genotoxic and carcinogenic hexavalent redox state upon oxidation by H2O2. Lung epithelial, mesothelial, lung carcinoma, and mesothelioma cells expressed membrane-bound Cr(VI) transporters and accumulated Cr up to 10-fold relative to the Cr(VI) concentration in the spiked medium. Conversely, anion transporter inhibitors decreased cellular Cr(VI) uptake up to 45-fold. Finally, chromium associated with chrysotile neither decomposed H2O2 nor contributed to fiber-mediated HO• generation. Altogether, our results support the hypothesis that Cr may leach from inhaled chrysotile in its hexavalent state and subsequently accumulate in cells of typically asbestos-burdened tissues, which could contribute to the carcinogenicity of chrysotile fibers. However, unlike Fe, Cr did not significantly contribute to the adverse radical production of chrysotile.

Ligand-Induced U Mobilization from Chemogenic Uraninite and Biogenic Noncrystalline U(IV) under Anoxic Conditions.

Microbial reduction of soluble hexavalent uranium (U(VI)) to sparingly soluble tetravalent uranium (U(IV)) has been explored as an in situ strategy to immobilize U. Organic ligands might pose a potential hindrance to the success of such remediation efforts. In the current study, a set of structurally diverse organic ligands were shown to enhance the dissolution of crystalline uraninite (UO2) for a wide range of ligand concentrations under anoxic conditions at pH 7.0. Comparisons were made to ligand-induced U mobilization from noncrystalline U(IV). For both U phases, aqueous U concentrations remained low in the absence of organic ligands (<25 nM for UO2; 300 nM for noncrystalline U(IV)). The tested organic ligands (2,6-pyridinedicarboxylic acid (DPA), desferrioxamine B (DFOB), N,N'-di(2-hydroxybenzyl)ethylene-diamine-N,N'-diacetic acid (HBED), and citrate) enhanced U mobilization to varying extents. Over 45 days, the ligands mobilized only up to 0.3% of the 370 µM UO2, while a much larger extent of the 300 µM of biomass-bound noncrystalline U(IV) was mobilized (up to 57%) within only 2 days (>500 times more U mobilization). This work shows the potential of numerous organic ligands present in the environment to mobilize both recalcitrant and labile U forms under anoxic conditions to hazardous levels and, in doing so, undermine the stability of immobilized U(IV) sources.

A subthermionic tunnel field-effect transistor with an atomically thin channel.

The fast growth of information technology has been sustained by continuous scaling down of the silicon-based metal-oxide field-effect transistor. However, such technology faces two major challenges to further scaling. First, the device electrostatics (the ability of the transistor's gate electrode to control its channel potential) are degraded when the channel length is decreased, using conventional bulk materials such as silicon as the channel. Recently, two-dimensional semiconducting materials have emerged as promising candidates to replace silicon, as they can maintain excellent device electrostatics even at much reduced channel lengths. The second, more severe, challenge is that the supply voltage can no longer be scaled down by the same factor as the transistor dimensions because of the fundamental thermionic limitation of the steepness of turn-on characteristics, or subthreshold swing. To enable scaling to continue without a power penalty, a different transistor mechanism is required to obtain subthermionic subthreshold swing, such as band-to-band tunnelling. Here we demonstrate band-to-band tunnel field-effect transistors (tunnel-FETs), based on a two-dimensional semiconductor, that exhibit steep turn-on; subthreshold swing is a minimum of 3.9 millivolts per decade and an average of 31.1 millivolts per decade for four decades of drain current at room temperature. By using highly doped germanium as the source and atomically thin molybdenum disulfide as the channel, a vertical heterostructure is built with excellent electrostatics, a strain-free heterointerface, a low tunnelling barrier, and a large tunnelling area. Our atomically thin and layered semiconducting-channel tunnel-FET (ATLAS-TFET) is the only planar architecture tunnel-FET to achieve subthermionic subthreshold swing over four decades of drain current, as recommended in ref. 17, and is also the only tunnel-FET (in any architecture) to achieve this at a low power-supply voltage of 0.1 volts. Our device is at present the thinnest-channel subthermionic transistor, and has the potential to open up new avenues for ultra-dense and low-power integrated circuits, as well as for ultra-sensitive biosensors and gas sensors.

Linking Isotope Exchange with Fe(II)-Catalyzed Dissolution of Iron(hydr)oxides in the Presence of the Bacterial Siderophore Desferrioxamine-B.

Dissolution of Fe(III) phases is a key process in making iron available to biota and in the mobilization of associated trace elements. Recently, we have demonstrated that submicromolar concentrations of Fe(II) significantly accelerate rates of ligand-controlled dissolution of Fe(III) (hydr)oxides at circumneutral pH. Here, we extend this work by studying isotope exchange and dissolution with lepidocrocite (Lp) and goethite (Gt) in the presence of 20 or 50 µM desferrioxamine-B (DFOB). Experiments with Lp at pH 7.0 were conducted in carbonate-buffered suspensions to mimic environmental conditions. We applied a simple empirical model to determine dissolution rates and a more complex kinetic model that accounts for the observed isotope exchange and catalytic effect of Fe(II). The fate of added tracer 57Fe(II) was strongly dependent on the order of addition of 57Fe(II) and ligand. When DFOB was added first, tracer 57Fe remained in solution. When 57Fe(II) was added first, isotope exchange between surface and solution could be observed at pH 6.0 but not at pH 7.0 and 8.5 where 57Fe(II) was almost completely adsorbed. During dissolution of Lp with DFOB, ratios of released 56Fe and 57Fe were largely independent of DFOB concentrations. In the absence of DFOB, addition of phenanthroline 30 min after tracer 57Fe desorbed predominantly 56Fe(II), indicating that electron transfer from adsorbed 57Fe to 56Fe of the Lp surface occurs on a time scale of minutes to hours. In contrast, comparable experiments with Gt desorbed predominantly 57Fe(II), suggesting a longer time scale for electron transfer on the Gt surface. Our results show that addition of 1-5 µM Fe(II) leads to dynamic charge transfer between dissolved and adsorbed species and to isotope exchange at the surface, with the dissolution of Lp by ligands accelerated by up to 60-fold.

Importance of oxidation products in coumarin-mediated Fe(hydr)oxide mineral dissolution.

Due to the low iron solubility in alkaline soils, plants have evolved different iron acquisition strategies, which are either based on ferric iron reduction (strategy I) or complexation by phytosiderophores (strategy II). Recently, a prominent role of coumarins for iron acquisition has been discovered, but details of the respective mechanism remain unclear. Since coumarins may act as iron-binding ligands but also as reductants, various reaction sequences are possible, resulting in different iron species and oxidized coumarins. In this context, it is often overlooked that oxidized coumarins are not just byproducts of iron(III) reduction, but may be actively involved in further steps of iron mobilization. In order to verify this active role of oxidized coumarins in Fe(hydr)oxide dissolution, we complemented iron dissolution data with data of single coumarins (esculetin, scopoletin, fraxetin) and their oxidation products, as a function of time, pH, and mineral (goethite, lepidocrocite). Our results demonstrate that there are four different routes for coumarin oxidation, leading to quinones, dimers, hydroxylated coumarins, demethylated coumarins, and combinations of these. The time-dependent species pattern differs with respect to mineral, pH, and coumarin molecule. Oxidized coumarins are often more reactive than the original coumarins, explaining unexpected iron mobilization by scopoletin, which is demethylated to esculetin. Also oxidative hydroxylation and dimerization increase the number of phenolic groups and yield new chelating properties. Several iron-species are identified for the three coumarins. Since oxidation reactions are initiated directly at mineral surfaces, they are often very effective-but this does not always result in more iron mobilization.

Identifying the reactive sites of hydrogen peroxide decomposition and hydroxyl radical formation on chrysotile asbestos surfaces.

BACKGROUND: Fibrous chrysotile has been the most commonly applied asbestos mineral in a range of technical applications. However, it is toxic and carcinogenic upon inhalation. The chemical reactivity of chrysotile fiber surfaces contributes to its adverse health effects by catalyzing the formation of highly reactive hydroxyl radicals (HO•) from H2O2. In this Haber-Weiss cycle, Fe on the fiber surface acts as a catalyst: Fe3+ decomposes H2O2 to reductants that reduce surface Fe3+ to Fe2+, which is back-oxidized by H2O2 (Fenton-oxidation) to yield HO•. Chrysotile contains three structural Fe species: ferrous and ferric octahedral Fe and ferric tetrahedral Fe (Fe3+tet). Also, external Fe may adsorb or precipitate onto fiber surfaces. The goal of this study was to identify the Fe species on chrysotile surfaces that catalyze H2O2 decomposition and HO• generation. RESULTS: We demonstrate that at the physiological pH 7.4 Fe3+tet on chrysotile surfaces substantially contributes to H2O2 decomposition and is the key structural Fe species catalyzing HO• generation. After depleting Fe from fiber surfaces, a remnant fiber-related H2O2 decomposition mode was identified, which may involve magnetite impurities, remnant Fe or substituted redox-active transition metals other than Fe. Fe (hydr)oxide precipitates on chrysotile surfaces also contributed to H2O2 decomposition, but were per mole Fe substantially less efficient than surface Fe3+tet. Fe added to chrysotile fibers increased HO• generation only when it became incorporated and tetrahedrally coordinated into vacancy sites in the Si layer. CONCLUSIONS: Our results suggest that at the physiological pH 7.4, oxidative stress caused by chrysotile fibers largely results from radicals produced in the Haber-Weiss cycle that is catalyzed by Fe3+tet. The catalytic role of Fe3+tet in radical generation may also apply to other pathogenic silicates in which Fe3+tet is substituted, e.g. quartz, amphiboles and zeolites. However, even if these pathogenic minerals do not contain Fe, our results suggest that the mere presence of vacancy sites may pose a risk, as incorporation of external Fe into a tetrahedral coordination environment can lead to HO• generation.

Publisher Correction: A molecular cross-linking approach for hybrid metal oxides.

In the version of this Article originally published, Liban M. A. Saleh was incorrectly listed as Liban A. M. Saleh due to a technical error. This has now been amended in all online versions of the Article.

A molecular cross-linking approach for hybrid metal oxides.

There is significant interest in the development of methods to create hybrid materials that transform capabilities, in particular for Earth-abundant metal oxides, such as TiO2, to give improved or new properties relevant to a broad spectrum of applications. Here we introduce an approach we refer to as 'molecular cross-linking', whereby a hybrid molecular boron oxide material is formed from polyhedral boron-cluster precursors of the type [B12(OH)12]2-. This new approach is enabled by the inherent robustness of the boron-cluster molecular building block, which is compatible with the harsh thermal and oxidizing conditions that are necessary for the synthesis of many metal oxides. In this work, using a battery of experimental techniques and materials simulation, we show how this material can be interfaced successfully with TiO2 and other metal oxides to give boron-rich hybrid materials with intriguing photophysical and electrochemical properties.

The Effect of pH and Biogenic Ligands on the Weathering of Chrysotile Asbestos: The Pivotal Role of Tetrahedral Fe in Dissolution Kinetics and Radical Formation.

Chrysotile asbestos is a soil pollutant in many countries. It is a carcinogenic mineral, partly due to its surface chemistry. In chrysotile, FeII and FeIII substitute Mg octahedra (Fe[6]), and FeIII substitutes Si tetrahedra (Fe[4]). Fe on fiber surfaces can generate hydroxyl radicals (HO. ) in Fenton reactions, which damage biomolecules. To better understand chrysotile weathering in soils, net Mg and Si dissolution rates over the pH range 3.0-11.5 were determined in the presence and absence of biogenic ligands. Also, HO. generation and Fe bulk speciation of pristine and weathered fibers were examined by EPR and Mössbauer spectroscopy. Dissolution rates were increased by ligands and inversely related to pH with complete inhibition at cement pH (11.5). Surface-exposed Mg layers readily dissolved at low pH, but only after days at neutral pH. On longer timescales, the slow dissolution of Si layers became rate-determining. In the absence of ligands, Fe[6] precipitated as Fenton-inactive Fe phases, whereas Fe[4] (7 % of bulk Fe) remained redox-active throughout two-week experiments and at pH 7.5 generated 50±10 % of the HO. yield of Fe[6] at pristine fiber surfaces. Ligand-promoted dissolution of Fe[4] (and potentially Al[4]) labilized exposed Si layers. This increased Si and Mg dissolution rates and lowered HO. generation to near-background level. It is concluded that Fe[4] surface species control long-term HO. generation and dissolution rates of chrysotile at natural soil pH.

Mercury Isotope Fractionation in the Subsurface of a Hg(II) Chloride-Contaminated Industrial Legacy Site.

To understand the transformations of mercury (Hg) species in the subsurface of a HgCl2-contaminated former industrial site in southwest Germany, Hg isotope analysis was combined with an investigation of Hg forms by a four-step sequential extraction protocol (SEP) and pyrolytic thermodesorption. Data from two soil cores revealed that the initial HgCl2 was partly reduced to metallic Hg(0) and that Hg forms of different mobility and oxidation state coexist in the subsurface. The most contaminated sample (K2-8, 802 mg kg-1 Hg) had a bulk δ202Hg value of around -0.43 ± 0.06‰ (2SD), similar to published average values for industrial Hg sources. Other sample signatures varied significantly with depth and between SEP pools. The most Hg-rich samples contained mixtures of Hg(0) and Hg(II) phases, and the water-extractable, mobile Hg pool exhibited heavy δ202Hg values of up to +0.18‰. Sequential water extracts revealed slow dissolution kinetics of mobile Hg pools, continuously releasing isotopically heavy Hg into solution. This was further corroborated by heavy δ202Hg values of groundwater samples. Our results demonstrate that the Hg isotope signature of an industrial contamination source can be significantly altered during the transformations of Hg species in the subsurface, which complicates source tracing applications but offers the possibility of using Hg isotopes as process tracers in contaminated subsurface systems.

Low Fe(II) Concentrations Catalyze the Dissolution of Various Fe(III) (hydr)oxide Minerals in the Presence of Diverse Ligands and over a Broad pH Range.

Dissolution of Fe(III) (hydr)oxide minerals by siderophores (i.e., Fe-specific, biogenic ligands) is an important step in Fe acquisition in environments where Fe availability is low. The observed coexudation of reductants and ligands has raised the question of how redox reactions might affect ligand-controlled (hydr)oxide dissolution and Fe acquisition. We examined this effect in batch dissolution experiments using two structurally distinct ligands (desferrioxamine B (DFOB) and  N, N'-di(2-hydroxybenzyl)ethylene-diamine- N, N'-diacetic acid (HBED)) and four Fe(III) (hydr)oxide minerals (lepidocrocite, 2-line ferrihydrite, goethite and hematite) over an environmentally relevant pH range (4-8.5). The experiments were conducted under anaerobic conditions with varying concentrations of (adsorbed) Fe(II) as the reductant. We observed a catalytic effect of Fe(II) on ligand-controlled dissolution even at submicromolar Fe(II) concentrations with up to a 13-fold increase in dissolution rate. The effect was larger for HBED than for DFOB. It was observed for all four Fe(III) (hydr)oxide minerals, but it was most pronounced for goethite in the presence of HBED. It was observed over the entire pH range with the largest effect at pH 7 and 8.5, where Fe deficiency typically occurs. The occurrence of this catalytic effect over a range of environmentally relevant conditions and at very low Fe(II) concentrations suggests that redox-catalyzed, ligand-controlled dissolution may be significant in biological Fe acquisition and in redox transition zones.

Fe(II)-Catalyzed Ligand-Controlled Dissolution of Iron(hydr)oxides.

Dissolution of iron(III)phases is a key process in soils, surface waters, and the ocean. Previous studies found that traces of Fe(II) can greatly increase ligand controlled dissolution rates at acidic pH, but the extent that this also occurs at circumneutral pH and what mechanisms are involved are not known. We addressed these questions with infrared spectroscopy and 57Fe isotope exchange experiments with lepidocrocite (Lp) and 50 µM ethylenediaminetetraacetate (EDTA) at pH 6 and 7. Addition of 0.2-10 µM Fe(II) led to an acceleration of the dissolution rates by factors of 7-31. Similar effects were observed after irradiation with 365 nm UV light. The catalytic effect persisted under anoxic conditions, but decreased as soon as air or phenanthroline was introduced. Isotope exchange experiments showed that added 57Fe remained in solution, or quickly reappeared in solution when EDTA was added after 57Fe(II), suggesting that catalyzed dissolution occurred at or near the site of 57Fe incorporation at the mineral surface. Infrared spectra indicated no change in the bulk, but changes in the spectra of adsorbed EDTA after addition of Fe(II) were observed. A kinetic model shows that the catalytic effect can be explained by electron transfer to surface Fe(III) sites and rapid detachment of Fe(III)EDTA due to the weaker bonds to reduced sites. We conclude that the catalytic effect of Fe(II) on dissolution of Fe(III)(hydr)oxides is likely important under circumneutral anoxic conditions and in sunlit environments.

Discovery and Validation of a Six-Marker Serum Protein Signature for the Diagnosis of Active Pulmonary Tuberculosis.

New non-sputum biomarker tests for active tuberculosis (TB) diagnostics are of the highest priority for global TB control. We performed in-depth proteomic analysis using the 4,000-plex SOMAscan assay on 1,470 serum samples from seven countries where TB is endemic. All samples were from patients with symptoms and signs suggestive of active pulmonary TB that were systematically confirmed or ruled out for TB by culture and clinical follow-up. HIV coinfection was present in 34% of samples, and 25% were sputum smear negative. Serum protein biomarkers were identified by stability selection using L1-regularized logistic regression and by Kolmogorov-Smirnov (KS) statistics. A naive Bayes classifier using six host response markers (HR6 model), including SYWC, kallistatin, complement C9, gelsolin, testican-2, and aldolase C, performed well in a training set (area under the sensitivity-specificity curve [AUC] of 0.94) and in a blinded verification set (AUC of 0.92) to distinguish TB and non-TB samples. Differential expression was also highly significant (P < 10-20) for previously described TB markers, such as IP-10, LBP, FCG3B, and TSP4, and for many novel proteins not previously associated with TB. Proteins with the largest median fold changes were SAA (serum amyloid protein A), NPS-PLA2 (secreted phospholipase A2), and CA6 (carbonic anhydrase 6). Target product profiles (TPPs) for a non-sputum biomarker test to diagnose active TB for treatment initiation (TPP#1) and for a community-based triage or referral test (TPP#2) have been published by the WHO. With 90% sensitivity and 80% specificity, the HR6 model fell short of TPP#1 but reached TPP#2 performance criteria. In conclusion, we identified and validated a six-marker signature for active TB that warrants diagnostic development on a patient-near platform.

Patterned Formation of Highly Coherent Nitrogen-Vacancy Centers Using a Focused Electron Irradiation Technique.

We demonstrate fully three-dimensional and patterned localization of nitrogen-vacancy (NV) centers in diamond with coherence times in excess of 1 ms. Nitrogen δ-doping during chemical vapor deposition diamond growth vertically confines nitrogen to 4 nm while electron irradiation with a transmission electron microscope laterally confines vacancies to less than 450 nm. We characterize the effects of electron energy and dose on NV formation. Importantly, our technique enables the formation of reliably high-quality NV centers inside diamond nanostructures with applications in quantum information and sensing.

Synergistic Effects between Biogenic Ligands and a Reductant in Fe Acquisition from Calcareous Soil.

Organisms have developed different strategies to cope with environmental conditions of low Fe availability based on the exudation of reducing, ligating, and acidifying compounds. In the context of Fe acquisition from soil, the effects of these reactive compounds have generally been considered independent and additive. However, highly efficient Fe acquisition strategies may rely on synergistic effects between reactive exudates. In the present study, we demonstrate that synergistic effects between biogenic ligands and a reductant (ascorbate) can occur in Fe mobilization from soil. Synergistic Fe mobilization was found for all ligands examined (desferrioxamine B (DFOB), 2'-deoxymugineic acid (DMA), esculetin, and citrate). The size and duration of the synergistic effect on Fe mobilization varied with ligand: larger effects were observed for the sideorphores compared to esculetin and citrate. For DFOB, the synergistic effect lasted for the 168 h duration of the experiment; for DMA, an initial synergistic effect turned into an antagonistic effect after 4 h because of enhanced mobilization of competing metals; and for esculetin and citrate, the synergistic effect was temporary (less than 24 h). Our results demonstrate that synergistic effects greatly enhance the reactivity of mixtures of compounds known to be exuded in response to Fe limitation. These synergistic effects could be decisive for the survival of plants and microorganisms under conditions of low Fe availability.