RESUMO
The expansion of T cells ex vivo is crucial for effective immunotherapy but currently limited by a lack of expansion approaches that closely mimic in vivo T cell activation. Taking inspiration from bottom-up synthetic biology, a new synthetic cell technology is introduced based on dispersed liquid-liquid phase-separated droplet-supported lipid bilayers (dsLBs) with tunable biochemical and biophysical characteristics, as artificial antigen presenting cells (aAPCs) for ex vivo T cell expansion. These findings obtained with the dsLB technology reveal three key insights: first, introducing laterally mobile stimulatory ligands on soft aAPCs promotes expansion of IL-4/IL-10 secreting regulatory CD8+ T cells, with a PD-1 negative phenotype, less prone to immune suppression. Second, it is demonstrated that lateral ligand mobility can mask differential T cell activation observed on substrates of varying stiffness. Third, dsLBs are applied to reveal a mechanosensitive component in bispecific Her2/CD3 T cell engager-mediated T cell activation. Based on these three insights, lateral ligand mobility, alongside receptor- and mechanosignaling, is proposed to be considered as a third crucial dimension for the design of ex vivo T cell expansion technologies.
RESUMO
The structure of supraparticles (SPs) is a key parameter for achieving advanced functionalities arising from the combination of different nanoparticle (NP) types in one hierarchical entity. However, whenever a droplet-assisted forced assembly approach is used, e.g., spray-drying, the achievable structure is limited by the inherent drying phenomena of the method. In particular, mixed NP dispersions of differently sized colloids are heavily affected by segregation during the assembly. Herein, the influence of the colloidal arrangement of Pt and SiO2 NPs within a single supraparticulate entity is investigated. A salt-based electrostatic manipulation approach of the utilized NPs is proposed to customize the structure of spray-dried Pt/SiO2 SPs. By this, size-dependent separation phenomena of NPs during solvent evaporation, that limit the catalytic performance in the reduction of 4-nitrophenol, are overcome by achieving even Pt NP distribution. Additionally, the textural properties (pore size and distribution) of the SiO2 pore framework are altered to improve the mass transfer within the material leading to increased catalytic activity. The suggested strategy demonstrates a powerful, material-independent, and universally applicable approach to deliberately customize the structure and functionality of multi-component SP systems. This opens up new ways of colloidal material combinations and structural designs in droplet-assisted forced assembly approaches like spray-drying.
RESUMO
We study the effect of additives on the colloidal stability of alkanethiol-coated gold nanoparticles. Cyclic amines and sulfides of different sizes were added to dispersions in decane at additive concentrations below 128 mM. Small-angle X-ray scattering (SAXS) indicated that tetrahydrothiophene reduced the agglomeration temperature, Tagglo, by up to 29 °C, a considerable increase in colloidal stability. Amines had a much weaker stabilizing effect of up to 2.5 °C. We found an unexpected maximum of stabilization for low additive concentrations, where Tagglo increased at concentrations above 64 mM. Molecular dynamics simulations were used to correlate these observations with the ligand shell structure. They excluded the physisorption of additives as a stabilization mechanism and suggested that sulfides replace hexadecanethiol on the AuNP surfaces by chemisorption. This hinders ligand ordering, thereby reducing Tagglo, which explains the stabilizing effect. Clustering of chemisorbed additive molecules at high concentration restabilized the ligand ordered state, explaining the detrimental effect of higher additive concentrations. The predictions of the simulations were confirmed by using thermogravimetric analyses and SAXS measurements of washed samples that indicated that the structure of the ligand shell itself, not the presence of physisorbed additives, changes Tagglo. Finally, we calculated potentials of mean force, which show that larger sulfide-based additives have a weaker affinity for the gold surface than smaller ones due to stronger steric hindrance. This explains why smaller cyclic sulfides were the most efficient stabilizers.
RESUMO
Ionic liquids are attractive liquid materials for many advanced applications. For targeted design, in-depth knowledge about their structure-property-relations is urgently needed. We prepared a set of novel protic ionic liquids (PILs) with a guanidinium cation with either an ether or alkyl side chain and different anions. While being a promising cation class, the available data is insufficient to guide design. We measured thermal and transport properties, nuclear magnetic resonance (NMR) spectra as well as liquid and crystalline structures supported by ab initio computations and were able to obtain a detailed insight into the influence of the anion and the ether substitution on the physical and spectroscopic properties. For the PILs, hydrogen bonding is the main interaction between cation and anion and the H-bond strength is inversely related to the proton affinity of the constituting acid and correlated to the increase of 1H and 15N chemical shifts. Using anions from acids with lower proton affinity leads to proton localization on the cation as evident from NMR spectra and self-diffusion coefficients. In contrast, proton exchange was evident in ionic liquids with triflate and trifluoroacetate anions. Using imide-type anions and ether side groups decreases glass transitions as well as fragility, and accelerated dynamics significantly. In case of the ether guanidinium ionic liquids, the conformation of the side chain adopts a curled structure as the result of dispersion interactions, while the alkyl chains prefer a linear arrangement.
RESUMO
Current environmental challenges and the shrinking fossil-fuel feedstock are important criteria for the next generation of polymer materials. In this context, we present a fully bio-based material, which shows promise as a thermoplastic elastomer (TPE). Due to the use of ß-farnesene and L-lactide as monomers, bio-based feedstocks, namely sugar cane and corn, can be used. A bifunctional initiator for the carbanionic polymerization was employed, to permit an efficient synthesis of ABA-type block structures. In addition, the "green" solvent MTBE (methyl tert-butyl ether) was used for the anionic polymerisation, enabling excellent solubility of the bifunctional anionic initiator. This afforded low dispersity (D=1.07 to 1.10) and telechelic polyfarnesene macroinitiators. These were employed for lactide polymerization to obtain H-shaped triblock copolymers. TEM and SAXS revealed clearly phase-separated morphologies, and tensile tests demonstrated elastic mechanical properties. The materials featured two glass transition temperatures, at - 66 °C and 51 °C as well as gyroid or cylindrical morphologies, resulting in soft elastic materials at room temperature.
RESUMO
Gravity can affect the agglomeration of nanoparticles by changing convection and sedimentation. The temperature-induced agglomeration of hexadecanethiol-capped gold nanoparticles in microgravity (µ g) is studied at the ZARM (Center of Applied Space Technology and Microgravity) drop tower and compared to their agglomeration on the ground (1 g). Nonpolar nanoparticles with a hydrodynamic diameter of 13 nm are dispersed in tetradecane, rapidly cooled from 70 to 10 °C to induce agglomeration, and observed by dynamic light scattering at a time resolution of 1 s. The mean hydrodynamic diameters of the agglomerates formed after 8 s in microgravity are 3 times (for low initial concentrations) to 5 times (at high initial concentrations) larger than on the ground. The observations are consistent with an agglomeration process that is closer to the reaction limit on thground and closer to the diffusion limit in microgravity.
Assuntos
Nanopartículas Metálicas , Ausência de Peso , Ouro , Difusão Dinâmica da Luz , TemperaturaRESUMO
Ice structures and their formation process are fundamentally important to cryobiology, geoscience, and physical chemistry. In this work, we synthesized gold nanoprobes by grafting water-soluble polyethylene glycol (PEG) onto spherical gold nanoparticles and analyzed the structure of ice formation in the vicinity of the resulting hybrid PEG-Au nanoparticles (AuPEGNPs). Temperature-dependent in situ small-angle X-ray scattering (SAXS) indicated that AuPEGNPs, like PEG, caused the formation of bulk spherulite ice. Unlike for PEG, we observed the formation of lamellar ice with a periodicty of 4.6 nm, which is thermodynamically less stable than the bulk form. The lamellar ice formed after AuPEGNP agglomeration during cooling at -19 °C, and it remained during subsequent heating from -20 to -11 °C and melted at around -10 °C, far below the melting temperature of bulk ice. We explain different effects of AuPEGNP and free PEG on ice formation by the topological differences. The highly concentrated PEG chains on the agglomerated Au cores lead to the formation of PEG-hydrates that assemble into lamellar ice with a periodicity of 4.6 nm.
RESUMO
We describe the gram-scale synthesis of hybrid gold nanoparticles with a shell of conductive polymers. A large-scale synthesis of hexadecyltrimethylammonium bromide (CTAB)-capped gold nanoparticles (AuNP@CTAB) was followed by ligand exchange with conductive polymers based on thiophene in a 10 L reactor equipped with a jacket to ensure a constant temperature of 40 °C and a mechanical stirrer. Slow and controlled reduction of the gold precursors and the presence of small amounts of silver nitrate are revealed to be the critical synthesis variables to obtain particles with a sufficiently narrow size distribution. Batches of approximately 10 g of faceted AuNP@CTAB with tunable average particle sizes from 54 to 85 nm were obtained per batch. Ligand exchange with poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) in the same reactor then yielded hybrid Au@PEDOT:PSS nanoparticles. They were used to formulate sinter-free inks for the inkjet printing of conductive structures without the need for a sintering step.
RESUMO
A one-pot approach for the preparation of diblock copolymers consisting of polystyrene and polymyrcene blocks is described via a temperature-induced block copolymer (BCP) formation strategy. A monomer mixture of styrene and myrcene is employed. The unreactive nature of myrcene in a polar solvent (tetrahydrofuran) at -78 °C enables the sole formation of active polystyrene macroinitiators, while an increase of the temperature (-38 °C to room temperature) leads to poly(styrene-block-myrcene) formation due to polymerization of myrcene. Well-defined BCPs featuring molar masses in the range of 44-117.2 kg mol-1 with dispersities, Ð, of 1.09-1.21, and polymyrcene volume fractions of 30-64% are accessible. Matrix assisted laser desorption ionization-time of flight mass spectrometry measurements reveal the temperature-controlled polymyrcene block formation, while both transmission electron microscopy and small-angle X-ray scattering measurements prove the presence of clearly microphase-separated, long range-ordered domains in the block copolymers. The temperature-controlled one-pot anionic block copolymerization approach may be general for other terpene-diene monomers.
Assuntos
Polímeros , Poliestirenos , Peso Molecular , Polimerização , TemperaturaRESUMO
Ionic liquids are modern liquid materials with potential and actual implementation in many advanced technologies. They combine many favourable and modifiable properties but have a major inherent drawback compared to molecular liquids - slower dynamics. In previous studies we found that the dynamics of ionic liquids are significantly accelerated by the introduction of multiple ether side chains into the cations. However, the origin of the improved transport properties, whether as a result of the altered cation conformation or due to the absence of nanostructuring within the liquid as a result of the higher polarity of the ether chains, remained to be clarified. Therefore, we prepared two novel sets of methylammonium based ionic liquids; one set with three ether substituents and another set with three butyl side chains, in order to compare their dynamic properties and liquid structures. Using a range of anions, we show that the dynamics of the ether-substituted cations are systematically and distinctly accelerated. Liquefaction temperatures are lowered and fragilities increased, while at the same time cation-anion distances are slightly larger for the alkylated samples. Furthermore, pronounced liquid nanostructures were not observed. Molecular dynamics simulations demonstrate that the origin of the altered properties of the ether substituted ionic liquids is primarily due to a curled ether chain conformation, in contrast to the alkylated cations where the alkyl chains retain a linear conformation. Thus, the observed structure-property relations can be explained by changes in the geometric shape of the cations, rather than by the absence of a liquid nanostructure. Application of quantum chemical calculations to a simplified model system revealed that intramolecular hydrogen-bonding is responsible for approximately half of the stabilisation of the curled ether-cations, whereas the other half stems from non-specific long-range interactions. These findings give more detailed insights into the structure-property relations of ionic liquids and will guide the development of ionic liquids that do not suffer from slow dynamics.
RESUMO
We examine network formation and percolation of carbon black by means of Monte Carlo simulations and experiments. In the simulation, we model carbon black by rigid aggregates of impenetrable spheres, which we obtain by diffusion-limited aggregation. To determine the input parameters for the simulation, we experimentally characterize the micro-structure and size distribution of carbon black aggregates. We then simulate suspensions of aggregates and determine the percolation threshold as a function of the aggregate size distribution. We observe a quasi-universal relation between the percolation threshold and a weighted average radius of gyration of the aggregate ensemble. Higher order moments of the size distribution do not have an effect on the percolation threshold. We conclude further that the concentration of large carbon black aggregates has a stronger influence on the percolation threshold than the concentration of small aggregates. In the experiment, we disperse the carbon black in a polymer matrix and measure the conductivity of the composite. We successfully test the hypotheses drawn from simulation by comparing composites prepared with the same type of carbon black before and after ball milling, i.e., on changing only the distribution of aggregate sizes in the composites.
RESUMO
Semiconductor nanoplatelets exhibit spectrally pure, directional fluorescence. To make polarized light emission accessible and the charge transport effective, nanoplatelets have to be collectively oriented in the solid state. We discovered that the collective nanoplatelets orientation in monolayers can be controlled kinetically by exploiting the solvent evaporation rate in self-assembly at liquid interfaces. Our method avoids insulating additives such as surfactants, making it ideally suited for optoelectronics. The monolayer films with controlled nanoplatelets orientation (edge-up or face-down) exhibit long-range ordering of transition dipole moments and macroscopically polarized light emission. Furthermore, we unveil that the substantial in-plane electronic coupling between nanoplatelets enables charge transport through a single nanoplatelets monolayer, with an efficiency that strongly depends on the orientation of the nanoplatelets. The ability to kinetically control the assembly of nanoplatelets into ordered monolayers with tunable optical and electronic properties paves the way for new applications in optoelectronic devices.
RESUMO
Conductive inkjet printing with metal nanoparticles is irreversible because the particles are sintered into a continuous metal film. The resulting structures are difficult to remove or repair and prone to cracking. Here, a hybrid ink is used to obviate the sintering step and print interconnected particle networks that become highly conductive immediately after drying. It is shown that reversible conductive printing is possible on low-cost cardboard samples after applying standard paper industry coats that are adapted in terms of surface energy and porosity. The conductivity of the printed films approaches that of sintered standard inks on the same substrate, but the mobility of the hybrid particle film makes them less sensitive to cracks during bending and folding of the substrate. Damages that occur can be partially repaired by wetting the film such that particle mobility is increased and particles move to bridge insulating gaps in the film. It is demonstrated that the conductive material can be recovered from the cardboard at the end of its life time and be redispersed to recycle the particles and reuse them in conductive inks.
RESUMO
Ionic liquids are an attractive material class due to their wide liquid range, intrinsic ionic conductivity, and high chemical as well as electrochemical stability. However, the widespread use of ionic liquids is hindered by significantly higher viscosities compared to conventional molecular solvents. In this work, we show how the transport properties of ionic liquids can be altered significantly, even for isostructural ions that have the same backbone. To this end, structure-property relationships have been determined for a set of 16 systematically varied representative ionic liquids. Variations in molecular structure include ammonium vs. phosphonium, ether vs. alkyl side chains, and rigid vs. flexible anions. Ab initio calculations are used to relate molecular structures to the thermal, structural and transport properties of the ionic liquids. We find that the differences in properties of ether and alkyl functionalised ionic liquids are primarily dependent on minimum energy geometries, with the conformational flexibility of ether side chains appearing to be of secondary importance. We also show unprecedented correlations between anion conformational flexibility and transport properties. Critically, increasing fluidity upon consecutive introduction of ether side chains and phosphonium centres into the cation is found to be dependent on whether the anion is flexible or rigid. We demonstrate that targeted design of functional groups based on structure-property relationships can yield ionic liquids of exceptionally high fluidity.
RESUMO
We studied the concentration-dependent agglomeration of apolar nanoparticles in different solvents. Octanethiol-stabilized gold nanoparticles (AuNPs) in evaporating liquid droplets were observed in situ using small-angle X-ray scattering. Concurrent analysis of liquid volume and particle agglomeration provided time-dependent absolute concentrations of free and agglomerated particles. All dispersions underwent an initial stage where the particle concentration increased but no agglomerates formed. Subsequently, agglomeration started at concentrations that varied by several orders of magnitude for different solvents. While agglomerates grew, the concentration of the dispersed particles remained at a constant "colloidal solubility" in most solvents. We consistently found that the colloidal stability of AuNPs decreased as cyclohexane > heptane > nonane > decane > toluene and suggest that details of the molecular interactions between solvent and ligand shell set this order.
RESUMO
Surfaces with surface-bound ligand molecules generally attract each other when immersed in poor solvents but repel each other in good solvents. While this common wisdom holds, for example, for oleylamine-ligated ultrathin nanowires in the poor solvent ethanol, the same nanowires were recently observed experimentally to bundle even when immersed in the good solvent n-hexane. To elucidate the respective binding mechanisms, we simulate both systems using molecular dynamics. In the case of ethanol, the solvent is completely depleted at the interface between two ligand shells so that their binding occurs, as expected, via direct interactions between ligands. In the case of n-hexane, ligands attached to different nanowires do not touch. The binding occurs because solvent molecules penetrating the shells preferentially orient their backbone normal to the wire, whereby they lose entropy. This entropy does not have to be summoned a second time when the molecules penetrate another nanowire. For the mechanism to be effective, the ligand density appears to best be intermediate, that is, small enough to allow solvent molecules to penetrate, but not so small that ligands do not possess a clear preferred orientation at the interface to the solvent. At the same time, solvent molecules may be neither too large nor too small for similar reasons. Experiments complementing the simulations confirm the predicted trends.
RESUMO
The combination of glenoid destruction with cuff arthropathy remains a challenge. A 75-year old woman presented with a post-traumatic loss of the glenoid and concomitant cuff arthropathy. Using CT-data a custom-made glenoid component was created by 3D printing. 6 months after reverse shoulder arthroplasty, the patient was free of pain with acceptable ROM. An individual glenoid component created by 3D printing is a feasible therapeutic option in patients with loss of the glenoid and concomitant cuff arthropathy.
Assuntos
Artropatias , Prótese Articular , Impressão Tridimensional , Articulação do Ombro , Idoso , Artroplastia , Feminino , Humanos , Lesões do Manguito Rotador , EscápulaRESUMO
We introduce a new method for the characterization of particles extracted from steels. Microalloyed steels were dissolved to extract niobium and titanium carbonitride particles, which are of critical importance for the mechanical properties of the steel. The size distribution and chemical composition of the particles were analyzed by single-particle inductively coupled plasma mass spectrometry and compared to results from electron microscopy. Mass spectrometry rapidly provided data on a large number of particles (>2000 in 1 min) and indicated two particle populations that differed in size and composition: smaller particles contained only niobium, whereas larger particles contained both niobium and titanium. Electron microscopy of a much smaller number of particles confirmed the results and indicated that the larger particles had complex, overgrown structures. The combination of single-particle mass spectrometry and electron microscopy enables a better understanding of the precipitation processes that form the particles during steel production at different stages of the thermomechanical-rolling process. A better understanding of the processes helps to improve the rolling process in order to exploit the alloying elements optimally.
RESUMO
This article presents the case of a 53-year-old male patient born in Sri Lanka, who presented to the outpatient unit with the suspicion of empyema of the knee joint. Within the framework of knee arthroscopy, the diagnosis of ochronosis was made and later confirmed by histopathological biopsy. The alkaptonuria is caused by a homogentisate 1,2-dioxygenase deficiency and leads to an accumulation of homogentisic acid, a degradation product of tyrosine. This leads to the characteristic appearance of ochronosis with bluish-black deposits in the tissue (e.g. in connective tissue, sclera and ear cartilage) and a black coloration of the urine.
Assuntos
Alcaptonúria/complicações , Articulação do Joelho/cirurgia , Ocronose/cirurgia , Alcaptonúria/diagnóstico , Artroscopia , Biópsia , Humanos , Articulação do Joelho/patologia , Masculino , Pessoa de Meia-Idade , Ocronose/diagnóstico , Ocronose/etiologia , Ocronose/patologiaRESUMO
In searching for polymer-based electrolytes with improved performance for lithium ion and lithium metal batteries, we studied block copolymer electrolytes with high amounts of bis(trifluoromethane)sulfonimide lithium obtained by macromolecular co-assembly of a poly(isoprene)-block-poly(styrene)-block-poly(ethylene oxide) and the salt from tetrahydrofuran. Particularly, an ultra-short poly(ethylene oxide) block of 2100â g mol-1 was applied, giving rise to 2D continuous lamellar microstructures. The macroscopic stability was ensured with major blocks from poly(isoprene) and poly(styrene), which separated the ionic conductive PEO/salt lamellae. Thermal annealing led to high ionic conductivities of 1.4â mS cm-1 at 20 °C with low activation energy and a superior lithium ion transference number of 0.7, accompanied by an improved mechanical stability (storage modulus of up to 107 â Pa). With high Li:O ratios >1, we show a viable concept to achieve fast Li+ transport in block copolymers (BCP), decoupled from slow polymer relaxation.