Water implications in dialysis therapy, threats and opportunities to reduce water consumption: a call for the planet.

Water is a dwindling natural resource, and potable water is wrongly considered an unlimited resource. Dialysis, particularly hemodialysis, is a water-hungry treatment that impacts the environment. The global annual water use of hemodialysis is approximately 265 million m3/yr. In this reference estimate, two-thirds of this water is represented by reverse osmosis reject water discharged into the drain. In this review, we would like to draw attention to the complexity and importance of water saving in hemodialysis. We propose that circular water management may comply with the "3R" concept: reduce (reduce dialysis need, reduce dialysate flow, and optimize reverse osmosis performance), reuse (reuse wastewater as potable water), and recycle (dialysis effluents for agriculture and aquaponic use). Awareness and sustainability should be integrated to create positive behaviors. Effective communication is crucial for water savings because local perspectives may lead to global opportunities. Besides the positive environmental impacts, planet-friendly alternatives may have significant financial returns. Innovative policies based on the transition from linear to circular water management may lead to a paradigm shift and establish a sustainable water management model. This review seeks to support policymakers in making informed decisions about water use, avoiding wasting, and finding solutions that may be planet friendly and patient friendly in dialysis, especially in hemodialysis treatments.

Storage facilities reclamation using dredged sediments from waterways: Growing media formulation for plants according to the EU Ecolabel requirements.

Dredged sediments display a great potential for growing media applications; however, there are few studies about their beneficial reuse for the waste storage reclamation. This research study aims at checking the agronomic values and environmental impacts of three growing media based on waterways sediments (WSs) and green waste (GW) according ecolabel requirements. For this purpose, three growing media named GW0, GW25, and GW50 were prepared at field pilot scale by co-composting WS and GWs during 12 months. Samples were submitted to ecolabel analyses package. Following to the ecolabel requirements, the growing media comply with criteria like pH, electrical conductivity, trace elements and polycyclic aromatic hydrocarbon contents, chlorides, and pathogens, whereas they are not in compliance with the EU Ecolabel guidelines for propagules, organic matter, and zinc contents. Results of laboratory leaching tests performed according to NF EN 12457-2 for GW0, GW25, and GW50 have shown that sulfates, soluble fraction exceed limit for inert waste storage. Lysimeter tests at pilot scale were performed during 6 months to check the leaching potential of pollutants from growing media under real field conditions, including a European ecolabel product. Results demonstrate that Ba, Mo, Sb, Zn, Se, and Sb are higher in GW0, GW25, and GW50 than in the European ecolabel. As, Cd, Cr, Ni, and F- are more soluble in the commercial product compared to other growing media. This study allowed to demonstrate that main characteristics are fulfilling for reusing these growing media in the specific field of waste storage reclamation.

Health risk assessment of heavy metals exposure via consumption of crops grown in phosphogypsum-contaminated soils.

The management of phosphogypsum (PG) heap, located south of the Sfax city in Tunisia, has been going on for decades. But dumping this solid waste still poses environmental problems. Even though valorized as amendment to agriculture soils, the sanitary impact of this practice is not seriously considered. To assess the risk of the transference of contaminants from PG to agricultural soil-plants food chain, a wild plant species Salicornia arabica grown in PG-contaminated field and tomato (Lycopersicon esculentum) and oat (Avena sativa) grown in laboratory using different rates (10, 20 and 30%) of PG amendment, were tested. The cadmium, lead, chromium, nickel, copper and zinc concentrations in soils and plants were determined by atomic absorption spectrometry and by inductively coupled plasma-mass spectrometry, respectively. Measurements showed that Ni, Cu and Pb levels in the amended soils were below international standards except for Cd and Cr which exceeded Chinese, FAO/WHO and European allowable standard limits. Gathered results showed that the more the PG rate increases, the more the bioconcentration factors of heavy metals increased in plants, particularly in the roots. This is a prospective study assuming direct or indirect exposure scenario of different human cohorts by consuming varied common food stuffs. The Human Exposure to Soil Pollutants evaluation and United State Environment Protection Agency models were adopted for the hazard quotient calculation to assess the acceptability of sanitary risk related to each metal. The direct and indirect health risk assessments varied in the decreasing order: children, adolescents and then adults. Therefore, the PG amendment must not exceed the rate of 10%.

An eco-friendly epoxy polymer binder for the treatment of Tunisian harbor sediments: Laboratory investigations for beneficial reuse.

The management of dredged sediments poses serious environmental and economic problems because of their geochemical properties and in particular their pollutant content. In this research, marine sediments from Tunisian harbors were collected to study their beneficial reuse as construction materials using an eco-friendly polymer binder. Experimental investigations include the determination of physicochemical, mineralogical, and environmental parameters of sediments from the Sidi Mansour and Sidi Youssef areas in Tunisia. Prismatic mortar samples (4 × 4 × 16 cm) were prepared at laboratory scale using normalized sand and epoxy resin. Then their composition was modified by including a sediment fraction in the substitution of sand at rates ranging from 10 to 50% in dry mass. After a 7-day curing period, mortar samples were submitted to mechanical, physicochemical, and environmental analyses. Mortar samples including sediment fractions displayed lower strength than sand mortar used as control. This result is explained by the increase of porosity values in the mortar samples when sediment samples were incorporated. A positive relationship between porosity and compressive strength values was evidenced, suggesting that the compactness of granular skeleton could play an important role in the preparation of materials. From an environmental point of view, the mortar samples containing sediment fractions showed relatively low leaching levels, which confirms their suitability for the manufacturing of construction materials.

Decision tree for mapping of halophyte cover around Ghannouch, Tunisia.

Environment of Ghannouch in the south-east of Tunisia is characterized by the wide-spread hypersaline soils, typically colonized by halophytes. The study of their distribution is required in order to reveal the extent of salinization and its dynamic. Mapping and monitoring with a remote sensing approach are foreseen as the ways to trace the spatial and temporal dimensions of the phenomenon. The identification of halophyte vegetation can take advantage by analyzing optical remote sensing data. Here, we propose using a decision tree approach applied to European Space Agency Sentinel-2 imagery, for an accurate land cover mapping of Ghannouch district in Gabès governorate. Data pre-processing was carried out using the European Space Agency's Sentinel Application Platform and the SEN2COR toolboxes. The mapping approach combines the spectral information in several channels of the visible-near-infrared spectrum. The land cover identification was performed following a spectral classification approach, exploiting several optical indices, normalized difference water index, normalized difference vegetation index, and several soil salinity index, in order to elaborate a decision tree algorithm. As a result, for an area of interest of 50 × 50 km2, at least 68% was classified as halophyte land cover. This mapping exercise represents an important step toward improved halophytes mapping in Tunisia and could be used to monitor the status of other salinity prone regions in the world.

Ecotoxicity of titanium silicon oxide (TiSiO4) nanomaterial for terrestrial plants and soil invertebrate species.

The huge evolution of nanotechnology and the commercialization of nanomaterials (NMs) positively contributed for innovation in several industrial sectors. Facing this rapid development and the emergence of NMs in the market, the release of this nanometric sized materials in the environment and the possible impact on different ecosystem components attracted the attention of researchers in the last few years. In our study we aimed to assess the impact of titanium silicon oxide nanomaterial (nano-TiSiO4) on soil biota to estimate a risk limit for this material. In the present research a battery of standardized ecotoxicological assays aimed at evaluating a wide range of endpoints (avoidance and reproduction of earthworms and collembolans, emergence/growth of four selected terrestrial plants) were carried out, using OECD artificial soil as test substrate spiked with aqueous suspension of different concentrations of nano-TiSiO4. The results showed a maximum avoidance percentage of 40% for earthworms (Esenia andrei) at the highest concentration tested (1000mgkg(-1) soildw of nano-TiSiO4). No significant effect on the reproductive function of both invertebrate species was recorded. Nevertheless, significant phytotoxic data was registered at least for the growth of dicotyledonous plant species (Lactuca sativa and Lycopersicon lycopersicum) with EC20 values ranging between 236 and 414 mg kg(-1) soildw of nano-TiSiO4 for L. sativa dry mass and fresh mass, respectively. Further, the characterization of nano-TiSiO4 in suspensions used to spike the soil, performed by Dynamic Light Scattering, showed the formation of aggregates with important average size diameter, thus demonstrating that the toxic effects observed were likely not size dependent. A deterministic PNEC (predicted no effect concentration) for this NM of 10.02mg kg(-1) soildw of nano-TiSiO4, is suggested, while no more ecotoxicological information exists.

Soil contamination with olive mill wastes negatively affects microbial communities, invertebrates and plants.

The aim of the present study was to evaluate the ecotoxicological effects of olive mill waste (OMW) on soil habitat function. To this end, soil samples from OMW evaporating ponds (S1-S5) located at Agareb (Sfax, Tunisia) and a reference soil (R) were collected. The effects of OMW on the springtails Folsomia candida (F.c.), the earthworm species Eisenia fetida (E.f.), Enchytraeus crypticus (E.c.) reproduction and on the soil living microbial communities were investigated. E.f. reproduction and tomato growth assays were performed in the reference soil amended with 0.43 to 7.60 % (wOMW/wref-soil) mass ratios of dried OMW. Changes in microbial function diversity were explored using sole-carbon-source utilization profiles (BiologEcoPlates®). E.f. absolutely avoided (100 %) the most polluted soil (S4) while the F.c. moderately avoided (37.5 ± 7.5 %) the same soil. E.c. reproduction in S4 was significantly lower than in S1, S2, S3 and S5, and was the highest in R soil. Estimated effect concentration EC50 for juveniles' production by E.f., and for tomato fresh weight and chlorophyll content were 0.138, 0.6 and 1.13 %, respectively. Community level physiological profiles (CLPPs) were remarkably different in R and S4 and a higher similarity was observed between soils S1, S2, S3 and S5. Principal component analysis (PCA) revealed that differences between soil microbial functional diversity were mainly due to high polyphenol concentrations, while the salinity negatively affected E.c. reproduction in OMW contaminated soils. These results clearly reflect the high toxicity of dried OMW when added to agricultural soils, causing severe threats to terrestrial ecosystem functions and services provided by invertebrates and microbial communities.

Effects of contaminated soils from a former iron mine (Ait Amar, Morocco) on enchytraeids (Enchytraeus bigeminus) and predatory mites (Hypoaspis aculeifer) in standard laboratory tests.

Mining activity is an important economic activity in several North Atlantic Treaty Organization (NATO) and North African countries. Within their territory derelict or active mining explorations represent risks to surrounding ecosystems, but engineered-based remediation processes are usually too expensive to be an option for the reclamation of these areas. A project funded by NATO was performed, with the aim of finding a more eco-friendly solution for reclamation of these areas. As part of an overall risk assessment, the risk of contaminated soils to selected soil organisms was evaluated. The main question addressed was: Does the metal-contaminated soils from a former iron mine located at Ait Amar (Morocco),which was abandoned in the mid-Sixties, affect the reproduction of enchytraeids (Enchytraeus bigeminus) and predatory mites (Hypoaspis aculeifer)? Soil samples were taken at 20 plots along four transects covering the mine area and at a reference site about 15km away from the mine. The soils were characterized pedologically and chemically, which showed a heterogeneous pattern of metal contamination (mainly cadmium, copper, and chromium, sometimes at concentrations higher than European soil trigger values). The reproduction of enchytraeids (Enchytraeus bigeminus) and predatory mites (Hypoaspis aculeifer) was studied using standard laboratory tests according to OECD guidelines 220 (2004) and 226 (2008). The number of juveniles of E. bigeminus was reduced at several plots with high concentrations of Cd or Cu (the latter in combination with low pH values). There was nearly no effect of the metal contaminated soils on the reproduction of H. aculeifer. The overall lack of toxicity at the majority of the studied plots is probably caused by the low availability of the metals in these soils unless soil pH was very low. Different exposure pathways are likely responsible for the different reaction of mites and enchytraeids (hard-bodied versus soft-bodied organisms). The results of this study can be used not only for assessing the risk of contaminated soils but also could play a role for the identification of soil remediation programs.

Effects of metal pollution on sediments in a highly saline aquatic ecosystem: case of the Moknine continental Sebkha (eastern Tunisia).

Potential contamination of the sediments in the Sebkha of Moknine (Tunisia) ecosystem was assessed by means of enrichment factors (EFs) estimated against reference sediment located ≈70 km away from the Sebkha. The use of EFs is recommended as a reliable method for heavy metal contamination assessment, provided that (1) element contents are corrected following a careful normalization procedure, and (2) the reference sediment is unaffected by anthropogenic alterations. The degree of contamination was assessed by the modified contamination degree approach. The obtained results indicated that surface sediments were enriched up to 22.9, 13.2, 5.46 and 3.19 times with Pb, Cu, Cr and Zn, respectively. Lower enrichment factors for Ni and Co suggested that anthropogenic sources were less important for these metals. The modified degree of contamination showed that the sediments in the Sebkha of Moknine have suffered significant systematic heavy metal contamination following catchment urbanization and industrialization .

Effects of long-term irrigation with treated wastewater on soil quality, soil-borne pathogens, and living organisms: case study of the vicinity of El Hajeb (Tunisia).

Medium (i.e. 15 years) and long-term (i.e. 20 years) impact of irrigation using secondary-treated municipal wastewater (TWW) was assessed on two agricultural soil samples, denoted by E and G, respectively, in the vicinity of El Hajeb region (Southern Tunisia). Soil pH, electrical conductivity particle size grading, potential risk of salinity, water holding capacity and chemical composition, as well as organic matter content, pathogenic microorganisms and heavy metal concentrations in the TWW-irrigated (E and G) and rainwater-irrigated (T) soils at various depths, were monitored and compared during a 5-year experiment. Our study showed that bacterial abundance is higher in sandy-clayey soil, which has an enhanced ability to retain moisture and nutrients. The high level of bacterial flora in TWW-irrigated soils was significantly (p < 0.05) correlated (r = ~0.5) with the high level of OM. Avoidance assays have been used to assess toxic effects generated by hazards in soils. The earthworms gradually avoided the soils from the surface (20 cm) to the depth (60 cm) of the G transect and then the E transect, preferring the T transect. The same behaviour was observed for springtails, but they seem to be less sensitive to the living conditions in transects G and E than the earthworms. The avoidance response test of Eisenia andrei was statistically correlated with soil layers at the sampling sites. However, the avoidance response test of Folsomia candida was positively correlated with silt-clay content (+0.744*) and was negatively correlated with sand content (-0.744*).

Adsorption of anti-inflammatory and analgesic drugs traces in water on clay minerals.

The aim of this study was to assess the adsorption of four non-steroidal anti-inflammatory drugs (NSAIDs), namely Paracetamol (PRC), Diclofenac (DIC), Ibuprofen (IBU), and Ketoprofen (KET), using both batch and continuous experiments with clay. Various analytical techniques, including XRD, FTIR, SEM coupled to EDX, and Zeta potential, were employed to characterize both raw and calcined clay. XRD and FTIR analyses confirmed the kaolinite nature of the clay. SEM data revealed a lamellar structure formed in the clay after calcination at 550 °C. Adsorption tests were conducted to determine the optimal adsorption conditions. Batch kinetics of adsorption demonstrated rapid adsorption of all four NSAIDs, with the highest adsorption occurring at pH 4 (DIC, IBU, and KET) and pH 6 for PRC, using a concentration of 20 mg L-1 of calcined clay. Additionally, the pseudo-second-order model provided the best fit for all NSAIDs adsorption processes. Maximum adsorption capacities, as determined by the Langmuir model, were 80 mg g-1 for PRC, 238 mg -1g for DIC, 138 mg g-1 for IBU, and 245 mg g-1 for KET. In fixed bed column studies, three dynamic models (Thomas, Adams-Bohart, and Yoon-Nelson) were utilized to describe the breakthrough curves, with linear regression used to identify key characteristics for process design. The fixed bed column adsorption study revealed that DIC exhibited the highest removal efficiency at 98%, while KET, IBU, and PRC were more persistent, with removal efficiencies of 77.1%, 76.7%, and 67.1%, respectively. The Thomas model was deemed appropriate for describing the breakthrough curve. These findings offer valuable insights into the interactions between clay and pharmaceuticals with varying physicochemical properties. They also provide information on the adsorption models, saturation, and adsorption capacities of various pharmaceuticals on natural clays, which can be crucial for further research and environmental remediation efforts.

Toxicity assessment for petroleum-contaminated soil using terrestrial invertebrates and plant bioassays.

The assessment of soil quality after a chemical or oil spill and/or remediation effort may be measured by evaluating the toxicity of soil organisms. To enhance our understanding of the soil quality resulting from laboratory and oil field spill remediation, we assessed toxicity levels by using earthworms and springtails testing and plant growth experiments. Total petroleum hydrocarbons (TPH)-contaminated soil samples were collected from an oilfield in Sfax, Tunisia. Two types of bioassays were performed. The first assessed the toxicity of spiked crude oil (API gravity 32) in Organization for Economic Co-operation and Development artificial soil. The second evaluated the habitat function through the avoidance responses of earthworms and springtails and the ability of Avena sativa to grow in TPH-contaminated soils diluted with farmland soil. The EC50 of petroleum-contaminated soil for earthworms was 644 mg of TPH/kg of soil at 14 days, with 67 % of the earthworms dying after 14 days when the TPH content reached 1,000 mg/kg. The average germination rate, calculated 8 days after sowing, varied between 64 and 74 % in low contaminated soils and less than 50 % in highly contaminated soils.

Living membrane bioreactor for highly effective and eco-friendly treatment of textile wastewater.

The treatability of synthetic textile wastewater containing model dyes, such as reactive black and direct black dye (25.0 ± 2.6 mgdye/L), with chemical oxygen demand (COD, 1000 ± 113 mg/L), ammonia­nitrogen (NH3-N, 140 ± 97 mg/L) and sulphate ions (SO42-, 1357 ± 10.86 mg/L) was investigated in this study using an innovative living membrane bioreactor (LMBR) using an encapsulated self-forming dynamic membrane (ESFDM). The key advantage of ESFDMBR is the self-forming of the biological filtering layer protected between two meshes of inert robust and inexpensive material. A laboratory scale bioreactor (BR) equipped with a filtering unit mounting polyester meshes with a pore size of 30 µm, operated at an influent flux of 30 LMH was thus used. After the formation of the biological living membrane (LM), the treatment significantly reduced COD and DOC concentrations to the average values of 34 ± 10 mg/L and 32 ± 7 mg/L, corresponding to reduction efficiencies of 96.0 ± 1.1 % and 94 ± 1.05 %, respectively. Throughout the LMBR operation, the colours were successfully removed from synthetic textile wastewater with an overall removal efficiency of about 85.0 ± 1.8 and 86.0 ± 1.9 % for direct and reactive dyes, respectively. In addition, the proposed system was also found effective in affording removal efficiency of ammonia (NH3) of 97 ± 0.5 %. Finally, this treatment afforded circa 40.7 ± 5.8 % sulphate removal, with a final concentration value of 805 ± 78.61 mg/L. The innovative living membrane, based on an encapsulated self-forming dynamic membrane allows a prolonged containment of the membrane fouling, confirmed by investigating the concentration of membrane fouling precursors and the time-course variations of turbidity and transmembrane pressure (TMP). Those final concentrations of wastewater pollutants were found to be below the limits for admission of the effluents in public sanitation networks in Italy and Tunisia, as representative countries for the regulation in force in Europe and North Africa. In conclusion, due to the low costs of plant and maintenance, the simple applicability, the rapid online implementation, the application of LMBR results in a promising method for the treatment of textile wastewater.

Hazard and health risk assessment of exposure to pharmaceutical active compounds via toxicological evaluation by zebrafish.

The uncontrolled or continuous release of effluents from wastewater treatment plants leads to the omnipresence of pharmaceutical active compounds (PhACs) in the aquatic media. Today, this is a confirmed problem becoming a main subject of twin public and scientific concerns. However, still little information is available about the long-term impacts of these PhACs on aquatic organisms. In this review, efforts were made to reveal correlation between the occurrence in the environment, ecotoxicological and health risks of different PhACs via toxicological evaluation by zebrafish (Danio rerio). This animal model served as a bioindicator for any health impacts after the exposure to these contaminants and to better understand the responses in relation to human diseases. This review paper focused on the calculation of Risk Quotients (RQs) of 34 PhACs based on environmental and ecotoxicological data available in the literature and prediction from the ECOSAR V2.2 software. To the best of the authors' knowledge, this is the first report on the risk assessment of PhACs by the two different methods as mentioned above. RQs showed greater difference in potential environmental risks of the PhACs. These differences in risk values underline the importance of environmental and experimental factors in exposure conditions and the interpretation of RQ values. While the results showed high risk to Danio rerio of the majority of PhACs, risk qualification of the others varied between moderate to insignifiant. Further research is needed to assess pharmaceutical hazards when present in wastewater before discharge and monitor the effectiveness of treatment processes. The recent new advances in the morphological assessment of toxicant-exposed zebrafish larvae for the determination of test compounds effects on the developmental endpoints were also discussed. This review emphasizes the need for strict regulations on the release of PhACs into environmental media in order to minimize their toxicity to aquatic organisms.

Photocatalytic degradation of 4-chlorophenol under P-modified TiO2/UV system: kinetics, intermediates, phytotoxicity and acute toxicity.

A series of phosphorus-modified titanium dioxide samples with varying P/Ti atomic ratio were conveniently prepared via a conventional solgel route. The effects of phosphorus content and calcination temperature on the crystalline structure, grain growth, surface area, and the photocatalytic activity of P-modified TiO2 were investigated. The XRD results showed that P species slow down the particle growth of anatase and increase the anatase-to-rutile phase transformation temperature to more than 900 degrees C. Kinetic studies on the P-modified TiO2 to degraded 4-chlorophenol had found that the TP5(500) prepared by adopting a P/Ti atomic ratio equal to 0.05 and calcined at 500 degrees C had an apparent rate constant equal to 0.0075 min(-1), which is superior to the performance of a commercial photocatalyst Degussa P25 K(app) = 0.0045 min(-1) and of unmodified TiO2 (TP0(500)) K(app) = 0.0022 min(-1). From HPLC analyses, various hydroxylated intermediates formed during oxidation had been identified, including hydroquinone (HQ), benzoquinone (BQ) and (4CC) 4-chlorocatechol as main products. Phytotoxicity was assessed before and after irradiation against seed germination of tomato (Lycopersicon esculentum) whereas acute toxicity was assessed by using Folsomia candida as the test organism. Intermediates products were all less toxic than 4-chlorophenol and a significant removal of the overall toxicity was accomplished.

Soil contamination by microplastics in relation to local agricultural development as revealed by FTIR, ICP-MS and pyrolysis-GC/MS.

Plastic film mulching and use of wastewaters for irrigation have been common agricultural practices for over half a century in Tunisia, especially in arid regions, resulting in the undesired creation of a pathway for microplastics (MPs) to enter farmland soil. In order to assess the extent and characteristics of soil contamination by MPs in the Moknine province, an area of intensive agricultural practices, 16 farmland soil samples were collected and characterized. The total concentration of targeted MPs was 50-880 items/kg; among them, the most common MPs type being polypropylene (PP), mainly occurring as white/transparent fibers with small size (cross section <0.3 mm). SEM images of MPs surfaces revealed multiple features related to environmental exposure and degradation. ATR-FTIR spectroscopy and pyrolysis-GC/MS analyses enabled the accurate identification of MPs separated from the embedding soil micro- and macro-aggregates. Finally, contamination of the polymeric microparticles with a broad range of metals was found by ICP-MS analysis, suggesting that MPs can be vectors for transporting heavy metals in the soil and indicators of soil contamination as a result of mismanagement of industrial wastewaters.

Types, occurrence, and distribution of microplastics and metals contamination in sediments from south west of Kerkennah archipelago, Tunisia.

Microplastics (MPs) are one of the most significant solid waste pollutants in the marine environment and accumulate in sediments around worldwide. In this study, the pollution level, the type, occurrence, and distribution of MPs in sediments from the southwestern Kerkennah archipelago, Tunisia, were investigated. Sediment samples were collected from 20 adjacent sites through three "lines L1, L2, and L3." MPs were separated from sediment by density flotation (NaCl, 1.2 g cm-3) and characterized in terms of shape, size, and color using microscope. The accumulation of toxic chemicals such as trace metals on microplastics was measured by atomic absorption microwave-assisted acid extraction. Polymer types were identified using FTIR-ATR spectroscopy. This study showed that microplastics were found in all samples, which emphasized that their extensive distribution throughout three lines by an average abundance of "MPs" was 611 items/m2. Among the shape categories of plastic particles, fiber and fragment were the most dominant frequent shapes (94%). The more frequent colors found were white (52.7%) and transparent (35.1%). Regarding the sizes, the microplastics below 1 mm were the most common accounting for 97% of all plastics. Results of trace metals Zn, Cu, Pb, Cr, and Ni in sediments with concentrations were reported as 3.48 µg/g, 0.41 µg/g, 0.38 µg/g, 0.33 µg/g, and 0.12 µg/g, respectively. Graphical abstract.

Microplastics on Barra beach sediments in Aveiro, Portugal.

Microplastic (MPs) pollution has been recognized as a serious threat to marine environment with the growing use of plastics. There is no sufficient data on the extent and characteristics of MPs pollution in the beach sediments and sand in the Atlantic Ocean. The coastal area is one of the main tourist zones in Aveiro in Portugal, thus, impacted by both tourism and maritime traffic, which are major sources of MPs. Considering this issue, 33 sediment samples were collected from the Praia da Barra beach in Aveiro. This pilot study showed that large quantities of MPs are accumulated on this beach with a median concentration of 100 MP kg-1 (15-320 MP kg-1), that is dominated by polyethylene (30%), polypropylene (27%), polystyrene (18%), nylon (12%), and polyester (6%). Size <1 mm constituted 99.5% of particles, mostly of transparent or black colors, with highest concentrations closest to the water line.

Indoor versus outdoor transmission of SARS-COV-2: environmental factors in virus spread and underestimated sources of risk.

The first case of Coronavirus Disease 2019 (COVID-19), which is caused by Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2), in Europe was officially confirmed in February 2020. On 11 March 2020, after thousands of deaths from this disease had been reported worldwide, the WHO changed their classification of COVID-19 from a public health emergency of international concern to a pandemic. The SARS-CoV-2 virus has been shown to be much more resistant to environmental degradation than other coated viruses. Several studies have shown that environmental conditions can influence its viability and infectivity. This review summarizes current knowledge on the transmission pathways of the novel coronavirus, and directs attention towards potentially underestimated factors that affect its propagation, notably indoor spread and outdoor risk sources. The contributions of significant indoor factors such as ventilation systems to the spread of this virus need to be carefully ascertained. Outdoor risk sources such as aerosolized particles emitted during wastewater treatment and particulate matter (PM), both of which may act as virus carriers, should be examined as well. This study shows the influence of certain underestimated factors on the environmental behavior and survival of the SARS-CoV-2 virus. These aspects of coronavirus propagation need to be accounted for when devising actions to limit not only the current pandemic but also future outbreaks.