RESUMO
The synthesis and characterization of ReS2 nanodots (NDs) are detailed, by highlighting their structure, morphological, and optical properties. ReS2 NDs were synthesized using NH4ReO4 as a rhenium source, thiourea as a sulfur source, and N-acetyl cysteine as a capping agent. The synthesis involved the hydrothermal reaction of these precursors, leading to the nucleation and growth of ReS2 NDs. Characterization techniques including transmission electron microscopy, energy dispersive X-ray spectroscopy, Fourier-transform infrared spectroscopy, X-ray diffraction, Raman spectroscopy, and X-ray photoelectron spectroscopy confirmed the formation of ReS2 NDs with a spherical morphology, crystalline structure, and rich sulfur sites. The fluorescence behavior of ReS2 NDs was found to be influenced by the solution pH, with fluorescence intensity increasing with rising pH values. This pH-dependent fluorescence response was attributed to the dissociation of functional groups and the subsequent impact on the excited-state proton transfer process. The fluorescence intensity of ReS2 NDs showed a correlation with solution pH, enabling pH detection from 3.0 to 12.5 with an interval of 0.5 pH unit. Additionally, the incorporation of ReS2 NDs into a polyvinyl alcohol (PVA) matrix resulted in pH-sensitive phosphorescence, offering a new avenue for pH sensing. The strong interaction between PVA and ReS2 NDs was proposed to enhance phosphorescence intensity and trigger a blue shift in the phosphorescent peak at high pH. The ReS2 NDs/PVA-deposited filter paper exhibited pH-sensitive fluorescence and phosphorescence, which could be utilized as unique identifiers or authentication markers. Moreover, the ReS2 NDs/PVA-deposited filter paper showed potential for discriminating between hydrogen chloride and ammonia, based on their distinct fluorescence and phosphorescence responses.
RESUMO
Industrial effluents are a leading major threat for water contamination, subsequently which results in severe health associated risks. Hence, purifying wastewater before releasing into the water resources is essential to avoid contamination. In this study, ZnO/Cu-DPA nano-composites were prepared by altering the percentage of Cu-DPA (20%, 30%, 40%, and 50% which are denoted to be ZnO/20%Cu-DPA, ZnO/30%Cu-DPA, ZnO/40%Cu-DPA and ZnO/50%Cu-DPA) using a simple mechanical grinding process. Several spectroscopic studies were employed such as electron paramagnetic analysis (EPR), powdered X-ray diffractometer (PXRD), UV-Vis absorbance spectroscopy, Fourier transform infrared (FT-IR) spectroscopy and scanning electron microscope to characterize these nano-composites. The photo-catalytic activities of the prepared nano-composites were studied by degrading MB under visible light irradiation. ZnO, ZnO/20%Cu-DPA, ZnO/30%Cu-DPA, ZnO/40%Cu-DPA and ZnO/50%Cu-DPA degradation efficiencies were determined to be 71.8, 78.5, 77.1, and 66.1%, respectively. Among the composite catalysts, the ZnO/20%Cu-DPA coupled system are demonstrated the best efficiency (87%) for photo-degradation of MB within 80 min when exposed to visible light. The ZnO/Cu-DPA nano-composites had a greater MB photodegradation efficiency than pristine ZnO owing to p-n heterojunction in the linked system. Under visible light irradiation, the ZnO/20%Cu-DPA catalysed the conversion of dissolved O2 to hydroxyl radicals (OH·), triggering the reduction of MB. This suggests that ·OH is the primary specific active radical involved in the photo-catalytic decomposition of MB. Furthermore, EPR analysis indicates the existence of ·OH in the photo-catalytic system. The proposed nano-composites (ZnO/20%Cu-DPA) reusability was investigated across three cycles as the most efficient photo-catalyst. The results show that, the ZnO/Cu-DPA nano-catalyst is a potential candidate for the remediation of dirty water.
RESUMO
Receptor-mediated drug delivery systems are a promising tool for targeting malignant cells to suppress/inhibit the malignancy without disturbing healthy cells. Protein-based nanocarrier systems possess numerous advantages for the delivery of variety of chemotherapeutics, including therapeutic peptides and genes. In the present work, glucose-conjugated camptothecin-loaded glutenin nanoparticles (Glu-CPT-glutenin NPs) were fabricated to deliver camptothecin to MCF-7 cells via GLUT-1 transporter protein. Initially, Glu-conjugated glutenin polymer was successfully synthesized through reductive amination reaction, and this was confirmed by FTIR and 13C-NMR. Then, camptothecin (CPT) was loaded into Glu-conjugated glutenin polymer forming Glu-CPT-glutenin NPs. The nanoparticles were studied for their drug releasing capacity, morphological shape, size, physical nature, and zeta potential. The fabricated Glu-CPT-glutenin NPs were found to be spherical in shape and amorphous in nature with 200-nm size range and a zeta potential of - 30 mV. Furthermore, MTT assay using Glu-CPT-glutenin NPs confirmed concentration-dependent cytotoxicity against MCF-7 cells after 24-h treatment, and IC50 was found to be 18.23 µg mL-1. In vitro cellular uptake study demonstrated that the Glu-CPT-glutenin NPs had enhanced endocytosis and delivered CPT in MCF-7 cells. A typical apoptotic morphological change of condensed nuclei and distorted membrane bodies was found after treatment with IC50 concentration of NPs. The released CPT from NPs also targeted mitochondria of MCF-7 cells, significantly increasing the level of reactive oxygen species and causing the damage of mitochondrial membrane integrity. These outcomes confirmed that the wheat glutenin can positively serve as a significant delivery vehicle and enhance the anticancer potential of this drug.
Assuntos
Neoplasias da Mama , Nanopartículas , Humanos , Feminino , Camptotecina/farmacologia , Neoplasias da Mama/tratamento farmacológico , Sistemas de Liberação de Medicamentos , Nanopartículas/química , Células MCF-7 , Polímeros/química , Polímeros/metabolismo , Linhagem Celular TumoralRESUMO
Biopolymers and ionic liquids are of prime importance in numerous applications. Recovery of industrially important noble metals such as palladium is of paramount significance considering their diverse applications. The main idea behind this work was to develop an effective strategy involving the impregnation of Aliquat-336 (ionic liquid) onto chitosan as a novel adsorbent for the adsorption of Pd(II). The analytical characterization was systematically done through FT-IR, XRD, SEM and EDX analysis. The interaction of the amino and hydroxyl functional groups in chitosan with the cationic nitrogen in the ionic liquid could be established through the above characterization. Several key parameters such as pH influence, amount of adsorbent, isotherms, kinetics and thermodynamic studies were also studied in detail for the adsorption of palladium. The effectiveness of adsorption was observed between pH 3.5-4.0 with 50 mL of 120 mg L(-1) Pd(II) solution giving a commendable monolayer adsorption capacity of 187.61 mg g(-1).
Assuntos
Quitosana/química , Líquidos Iônicos/química , Paládio/toxicidade , Purificação da Água , Adsorção , Cromo/química , Cromo/toxicidade , Cinética , Paládio/química , Espectroscopia de Infravermelho com Transformada de Fourier , Termodinâmica , Poluentes Químicos da Água/química , Poluentes Químicos da Água/toxicidadeRESUMO
In the present work, we propose for the first time a novel ultrasound assisted methodology involving the impregnation of zirconium in a cellulose matrix. Fluoride from aqueous solution interacts with the cellulose hydroxyl groups and the cationic zirconium hydroxide. Ultrasonication ensures a green and quick alternative to the conventional time intensive method of preparation. The effectiveness of this process was confirmed by comprehensive characterization of zirconium impregnated cellulose (ZrIC) adsorbent using Fourier transform infrared spectroscopy (FT-IR), energy dispersive X-ray spectrometry (EDX) and X-ray diffraction (XRD) studies. The study of various adsorption isotherm models, kinetics and thermodynamics of the interaction validated the method.
Assuntos
Celulose/química , Fluoretos/química , Sonicação/métodos , Zircônio/química , Adsorção , Fluoretos/isolamento & purificação , Concentração de Íons de Hidrogênio , Cinética , TermodinâmicaRESUMO
The work discussed in this paper is based on the utilization of ultrasound in conjunction with an ionic liquid (Aliquat 336) impregnated Dowex 1×8 resin for the effective adsorption of chromium. Ionic liquids are known for their selectivity toward metal extraction and ultrasonic medium offers efficient energy transfer for impregnating the ionic liquid in the resin matrix. The molecular interaction between the ionic liquid impregnated resin and chromium was studied through various physicochemical and spectroscopic techniques. The influence of various analytical parameters on the adsorption of Cr(VI) such as pH, adsorbent dosage, temperature and interference of foreign ions was studied in detail. Chromium (VI) was quantitatively adsorbed in the pH range of 3.5-4, with a high adsorption capacity of 230.9 mg g(-1) in conformity with the Langmuir isotherm model. The study of thermodynamic parameters showed that the adsorption process is exothermic and spontaneous. The adsorbent could be regenerated using 1 mol L(-1) HCl-0.28 mol L(-1) ascorbic acid mixture. Chromium could be effectively detoxified from an industrial effluent and finally the developed method was validated with the analysis of a certified reference material (BCR-715). The obtained results indicated that the ultrasonic assisted impregnation of the room temperature ionic liquid significantly enhances and improves the removal efficiency of Cr(VI).
Assuntos
Cromo/química , Líquidos Iônicos/química , Resinas Sintéticas/química , Ultrassom/métodos , Adsorção , Estudos de Viabilidade , Concentração de Íons de Hidrogênio , Indicadores e Reagentes , Resíduos Industriais , Cinética , Microscopia Eletrônica de Varredura , Reprodutibilidade dos Testes , Espectroscopia de Infravermelho com Transformada de Fourier , Temperatura , Termodinâmica , Eliminação de Resíduos Líquidos , Poluentes Químicos da Água/análiseRESUMO
The molecular interaction between tetrabutylammonium iodide (TBAI) and cellulose and its potential application for the adsorption of chromium is discussed in this paper. The biosorbent was prepared under solvent free conditions using microwave irradiation. A subtle balance between electrostatic and the hydrophobic effects governs the interaction of biopolymer with the surfactant. The interaction between the biosorbent and chromium was comprehensively studied using spectroscopic, thermal and surface analysis techniques. The various analytical parameters that influence the adsorption were optimized, and the maximum adsorption capacity of Cr(VI) obtained from the Langmuir isotherm model was found to be 16.67 mg g(-1). The sorption thermodynamics indicated the spontaneity and exothermic nature of adsorption. The biosorbent could be effectively regenerated using NaOH, which imparts greener aspect to the overall process.