Comparison of needle and conventional arthroscopy for visualisation of predefined anatomical structures of the knee joint: a feasibility study in human cadavers and patients.

BACKGROUND: In terms of the optics used for Knee arthroscopy, a large number of different endoscopes are currently available. However, the use of the 30° optics in knee arthroscopy has been established as the standard procedure for many years. As early as the 1990s, needle arthroscopy was occasionally used as a diagnostic tool. In addition to the development of conventional optics technology in terms of camera and resolution, needle arthroscopes are now available with chip-on-tip image sensor technology. To date, no study has compared the performance of this kind of needle arthroscopy versus standard arthroscopy in the clinical setting in terms of the visibility of anatomical landmarks. In this monocentric prospective feasibility study, our aim was to evaluate predefined anatomical landmarks of the knee joint using needle arthroscopy (0° optics) and conventional knee arthroscopy (30° optics) and compare their performance during knee surgery. METHODS: Examinations were performed on eight cadavers and seven patients who required elective knee arthroscopy. Two surgeons independently performed the examinations on these 15 knee joints, so that we were able to compare a total of 30 examinations. The focus was on the anatomical landmarks that could be visualized during a conventional diagnostic knee arthroscopy procedure. The quality of visibility was evaluated using a questionnaire. RESULTS: In summary, the average visibility for all the anatomic landmarks was rated 4.98/ 5 for the arthroscopy using 30° optics. For needle arthroscopy, an average score of 4.89/ 5 was obtained. Comparatively, the needle arthroscope showed slightly limited visibility of the retropatellar gliding surface in eight (4.5/ 5 vs. 5/ 5), medial rim of the patella in four (4.85/ 5 vs. 5/ 5), and suprapatellar recess in four (4.83/ 5 vs. 5/ 5) cases. Needle arthroscopy was slightly better at visualizing the posterior horn of the medial meniscus in four knee joints (4.9/ 5 vs. 4.85/ 5). CONCLUSION: Needle arthroscopy is a promising technology with advantages in terms of minimally invasive access and good visibility of anatomical landmarks. However, it also highlights some limitations, particularly in cases with challenging anatomy or the need for a wide field of view.

Anatomical versus non-anatomical configuration of double coraco-clavicular tunnel technique in acromioclavicular joint reconstruction.

PURPOSE: Horizontal instability is a common problem after acromioclavicular joint injuries. The aim of this study was to evaluate if there is a difference regarding horizontal stability between an anatomical and a non-anatomical configuration of the double tunnel coraco-clavicular ligament reconstruction of the acromioclavicular joint. METHODS: Thirteen acromioclavicular joints of human cadaveric shoulders in ethanol-glycerin fixation were included in the study and underwent cyclic anterior and posterior translational testing at a load of 70 N using an electromechanical uniaxial testing machine. The shoulders were randomly assigned to the following groups: double coraco-clavicular tunnel technique in an anatomical configuration (DCTa) and double coraco-clavicular tunnel technique in an inverse configuration of the anatomical position (DCTb). The dislocation was recorded with a 3D optical measuring system. RESULTS: The total horizontal displacement (p10 = 0.0221; p5000 = 0.082) was significantly higher for the non-anatomical reconstruction (DCTb) compared to the anatomical reconstruction (DCTa) after every measured amount of cycles. The increase in displacement for DCTb group was overall higher than the increase in displacement for DCTa group but without significance. CONCLUSION: Reconstruction of the CC ligaments in an anatomical configuration with two suture devices results in a significantly higher stability of the AC joint in the horizontal plane than reconstruction of the CC ligaments in a non-anatomical configuration. Based on the results of this biomechanical in vitro study, the use of a double coraco-clavicular reconstruction should focus on an anatomically correct position of the suture devices.

Post-mortem in situ stability of serum markers of cerebral damage and acute phase response.

The aim of the given study was to test the in situ stability of biochemical markers of cerebral damage and acute phase response in the early post-mortem interval to assess their usability for forensic pathology. A monocentric, prospective study investigated post-mortem femoral venous blood samples at four time points obtained within 48 h post-mortem starting at the death of 20 deceased, using commercial immunoassays for the ten parameters: S100 calcium-binding protein B (S100B), glial fibrillary acidic protein (GFAP), neuron-specific enolase (NSE), brain-derived neurotrophic factor (BDNF), interleukin-6 (IL-6), C-reactive protein (CRP), procalcitonin (PCT), ferritin, soluble tumor necrosis factor receptor type 1 (sTNFR1), and lactate dehydrogenase (LDH). Significant changes in serum levels were observed only later than 2 h after death for all markers. Inter-laboratory comparability was high, and intra-assay precision was sufficient for most markers. Most of the biomarker levels depended on the severity of hemolysis and lipemia but were robust against freeze-thaw cycles. Serum levels increased with longer post-mortem intervals for S100B, NSE, ferritin, sTNFR1, and LDH (for all p < 0.001) but decreased over this period for CRP (p = 0.089) and PCT (p < 0.001). Largely unchanged median values were found for GFAP (p = 0.139), BDNF (p = 0.106), and IL-6 (p = 0.094). Serum levels of CRP (p = 0.059) and LDH (p = 0.109) did not differ significantly between the final ante-mortem (resuscitation) and the first post-mortem sample (moment of death). Collecting the post-mortem blood sample as soon as possible will reduce the influence of post-mortem blood changes. Serum GFAP for detection of cerebral damage as well as serum IL-6 and CRP as proof of acute phase response seemed to be preferable due to their in situ stability in the first 2 days after death.

Acromioclavicular joint reconstruction: an additional acromioclavicular cerclage does not improve horizontal stability in double coraco-clavicular tunnel technique.

PURPOSE: Horizontal instability-especially in the posterior plane-is a common problem after acromioclavicular joint injuries. The purpose was to compare the stability of a single coraco-clavicular tunnel technique and a double coraco-clavicular tunnel technique for coraco-clavicular ligament reconstruction and to examine the influence of an additional acromioclavicular cerclage on the horizontal stability in the acromioclavicular joint. METHODS: 21 acromioclavicular joints of human cadaveric shoulders were randomly assigned to the following groups: single coraco-clavicular tunnel technique with horizontal augmented acromioclavicular cerclage (SCT + AC); double coraco-clavicular tunnel technique (DCT); double coraco-clavicular tunnel technique and acromioclavicular cerclage (DCT + AC). The specimens underwent cyclic horizontal testing and were recorded using a 3D optical measuring system. RESULTS: The displacement and the increase in displacement in relation to the displacement after precondition for SCT + AC were significantly higher after every measured amount of cycles than for DCT (p10 = 0.0023; p5000 = 0.0012) and DCT + AC (p10 = 0.0006; p5000 = 0.0012). There was no significant difference in the total displacement, or in the increase in total displacement between double coraco-clavicular tunnel reconstructed groups with and without additional acromioclavicular cerclage. CONCLUSION: Double coraco-clavicular tunnel technique with and without additional acromioclavicular cerclage results in a significant higher stability regarding the horizontal plane in comparison to single coraco-clavicular tunnel technique with acromioclavicular cerclage. Based on the results of this biomechanical in vitro study, the use of an additional acromioclavicular cerclage with single coraco-clavicular tunnel technique may not be indicated in most cases. The effect of an additional acromioclavicular cerclage seems to be negligible, at least in presence of a double-coraco-clavicular tunnel technique reconstruction. Techniques of AC joint reconstruction should focus on the use of double coraco-clavicular tunnel devices.

Positional Relations of the Cervical Vagus Nerve Revisited.

OBJECTIVES: The cervical part of the vagus nerve (CVN) has become an important target for stimulation therapy to treat epilepsy and psychiatric conditions. For this purpose, the CVN is visualized in the carotid sheath, assuming it to be localized dorsomedially between the carotid artery (CA) and the internal jugular vein (JV). The aim of our morphological study was therefore to revisit the CVN relationships to the CA and JV, hypothesizing it to have common variations to this classical textbook anatomy. MATERIALS AND METHODS: Positional relations of the CVN, CA and JV were investigated in the carotid sheath of 35 cadavers at the C3 to C6 level. Positional relations of the CVN, CA and JV were documented on the basis of a 3 × 3 chart. RESULTS: Eighteen different arrangements of the CVN, CA and JV were observed. The typical topographic relationship of the CVN dorsomedially between the CA and JV was only found in 42% of all cases. The CVN was located dorsally or (dorso-)laterally to the CA in 80% and dorsally or (dorso-)medially of the JV in 96% of all cases. CONCLUSIONS: Classical textbook anatomy of the CVN is only present in a minority of cases. Positional variations in contrast to textbook anatomy are considerably more frequent than previously described, which might be a hypothetical morphological explanation for the lack of efficacy or side effects of CVN stimulation. Furthermore, the position of the CVN relative to the internal jugular vein is more consistent than to the CA.

Teaching surgical exposures to undergraduate medical students: an integration concept for anatomical and surgical education.

BACKGROUND: Decreasing numbers of students are interested in starting a surgical career, posing substantial challenges to patient care in the next years. The anatomy course is one of the key subjects in medical training, especially in surgical disciplines. Innovative teaching concepts that integrate surgically relevant anatomy and manual dexterity might help boost student interest in surgery. METHODS: A preclinical workshop entitled "Surgical exposures" was developed. A team of anatomists and surgeons introduced the surgical exposures, demonstrating the procedures on Thiel-fixed body donors. Following this introduction, students practiced the exposures in an operating room-like manner. A six-point Likert scale was used to evaluate the workshop and to compare it to the first-year dissection course. RESULTS: The overall evaluation result for the surgical exposures was excellent, proving to be a significantly better result when compared to the first-year dissection course. The students were more satisfied with the teaching time invested by the peers and regarded the workshop as clinically highly relevant. Furthermore, they felt that questions were addressed better and that the overall atmosphere was better than in the gross anatomy course. Subject to criticism was the course size and practicing time in both cases. DISCUSSION: The surgical exposures workshop provides preclinical students with clinically relevant anatomy and manual dexterity. It may positively influence the decision to follow a surgical career. This course, however, requires extensive teaching resources. The given concept may help implement practical medical skills in the preclinical curriculum, strengthening the professional identity of surgeons and anatomists.

Image-free navigated coracoclavicular drilling for the repair of acromioclavicular joint dislocation: a cadaver study.

BACKGROUND: Reconstruction of the coracoclavicular ligament functions to restore anatomic alignment of the clavicle and may improve biomechanical function and clinical outcomes. Improper placement of the coracoclavicular tunnel may inherently weaken the coracoid. The purpose of this study was to evaluate the feasibility and accuracy of navigated image-free placement of K-wires for coracoclavicular tunnel position in comparison to conventional drill guide-based placement. MATERIALS AND METHODS: Eight human shoulder specimens were assigned for conventional technique with a coracoclavicular guide device (group CP) and the paired contralateral side for the navigated procedure (group NP) with an optoelectronic system with a fluoro-free software module. First-pass accuracy (%) and the K-wire trajectory (lateral-center orientation (LC), center-center (CC) orientation and medial-center orientation (MC) were measured. RESULTS: In all navigated K-wires a 100 % first-pass accuracy was observed. In three of the eight (37.5 %) specimens of the drill guide-based group, drilling had to be repeated. One of them had to be repeated twice, resulting in eight versus twelve drillings for the navigated versus conventional group, respectively (p = 0.021). K-wire trajectory showed an MC orientation in most of the specimen (n = 9, group NP 4, group CP 5). CONCLUSIONS: Image-free navigated coracoclavicular drilling for the repair of acromioclavicular joint dislocation has higher first-pass accuracy in comparison to conventional drill guide-based placement and, therefore, may enable a precise anatomic position of the drill holes and reduce the risk of an iatrogenic coracoid fracture.

Primary stability in locking plate fixation for proximal humeral fractures may be increased by using an additional nail osteosynthesis in combination with locking plate osteosynthesis-A biomechanical comparison.

BACKGROUND: Stability is regarded as an important factor for proper healing and avoiding secondary dislocation in osteoporotic fractures of the proximal humerus. Several surgical techniques have been proposed for treatment, including intramedullary nail osteosynthesis and locking plate fixation. This study introduces a novel approach that combines both techniques and compares its primary stability with conventional methods. METHODS: The study involved 25 osteoporotic humeri with two-part fracture models, which were randomly assigned to locking-plate fixation, intramedullary nailing, or a combination of both techniques. The specimens were subjected to sinusoidal loading at 250 N in 20° abduction for 5000 cycles and then to quasi-static loading until failure. Fracture movement, failure mode, and failure load were measured and compared among the groups. FINDINGS: The groups fixated with intramedullary nailing and the groups fixated with intramedullary nailing and locking plate fixation showed significantly lower fracture motion than the group using locking plate fixation only (p < 0.005) and significantly higher load to failure (p = 0.007 and p = 0.0062, respectively). There was no significant difference between the group using intramedullary nailing and the group using locking-plate fixation and intramedullary nailing in fracture movement or load-to-failure (p > 0.005). INTERPRETATION: The results indicate that locking plate fixation provides less primary stability than intramedullary nailing or the combined of both techniques. This combined approach may offer advantages as a treatment for complex proximal humeral fractures in osteoporotic bone, and specific implants should be developed to ensure optimal treatment.

Novel approach to assessing the primary stability of dental implants under functional cyclic loading in vitro: a biomechanical pilot study using synthetic bone.

PURPOSE: This pilot study was conducted to develop a novel test setup for the in vitro assessment of the primary stability of dental implants. This was achieved by characterising their long-term behaviour based on the continuous recording of micromotions resulting from dynamic and cyclic loading. METHODS: Twenty screw implants, each 11 mm in length and either 3.8 mm (for premolars) or 4.3 mm (for molars) in diameter, were inserted into the posterior region of 5 synthetic mandibular models. Physiological masticatory loads were simulated by superimposing cyclic buccal-lingual movement of the mandible with a vertically applied masticatory force. Using an optical 3-dimensional (3D) measuring system, the micromotions of the dental crowns relative to the alveolar bone resulting from alternating off-centre loads were concurrently determined over 10,000 test cycles. RESULTS: The buccal-lingual deflections of the dental crowns significantly increased from cycle 10 to cycle 10,000 (P<0.05). The deflections increased sharply during the first 500 cycles before approaching a plateau. Premolars exhibited greater maximum deflections than molars. The bone regions located mesially and distally adjacent to the loaded implants demonstrated deflections that occurred synchronously and in the same direction as the applied loads. The overall spatial movement of the implants over time followed an hourglass-shaped loosening pattern with a characteristic pivot point 5.5±1.1 mm from the apical end. CONCLUSIONS: In synthetic mandibular models, the cyclic reciprocal loading of dental implants with an average masticatory force produces significant loosening. The evasive movements observed in the alveolar bone suggest that its anatomy and yielding could significantly influence the force distribution and, consequently, the mechanical behaviour of dental implants. The 3D visualisation of the overall implant movement under functional cyclic loading complements known methods and can contribute to the development of implant designs and surgical techniques by providing a more profound understanding of dynamic bone-implant interactions.

Comparing the accuracy of ultrasound-based measurements of the cervical vagus nerve.

Vagus nerve stimulation (VNS) has become a promising therapy especially for drug resistant epilepsy and other pathologies. Side effects or missing therapeutic success are observed due to cuff electrodes that are too narrow or too wide. Preoperative high-resolution ultrasound is used to evaluate the size of the cervical vagus nerve (CVN) to estimate the size of cuff electrodes for VNS. It remains unclear how precise ultrasound reflects the CVN dimensions, which has been the objective of this study. CVN cross-sections and diameters were investigated in 23 sides from 12 bodies, using ultrasound, histology, and CVN casting in situ as a reference. Morphometric data were obtained including fascicle count and nerve composition in histology. CVN yielded significant side-, age-, and BMI-related differences. CVN cross-sections were smaller in ultrasound when compared to casting and histology (1.5 ± 0.4 vs. 3.1 ± 0.9 vs. 2.3 ± 0.7 mm2). With the given setting in ultrasound, CVN cross-sections were consistently underestimated when compared to casting. Ultrasound-based cross-section measurements are related to a biased estimation of CVN size. A factor to correct for method related differences may help to adjust for accurate cuff electrode sizes for patient needs and to reduce undesired effects and potentially material consumption.

Undergraduate medical student perceptions and learning outcomes related to anatomy training using Thiel- and ethanol-glycerin-embalmed tissues.

Anatomical dissection is known to serve as an integral tool in teaching gross anatomy, including postgraduate training. A variety of embalming techniques exist, resulting in different haptic and optical tissue properties. This study aimed to objectify learning outcomes and medical student perceptions related to the use of two widely used embalming techniques, namely Thiel and ethanol-glycerin embalming. Between 2020 and 2022, first- and second-year medical students enrolled in the course on topographic anatomy participated in this study. Objective structured practical examinations were carried out for the head, neck, thorax, abdomen, pelvis, and extremity regions following regional dissection just before the oral examinations began. Six to ten numbered tags were marked in prosections of each region in Thiel- and ethanol-glycerin-embalmed specimens. Following the examinations, the students were surveyed regarding the suitability of the two embalming techniques with respect to preservation, colorfastness, tissue pliability, and the suitability in preparing for their anatomy examinations. Consistently higher scores were achieved for the thoracic and abdominal regions in ethanol-glycerin-embalmed specimens when compared to Thiel. No benefit was found for Thiel-embalmed upper or lower extremities. Tissues embalmed with ethanol-glycerin were rated higher for preservation and suitability to achieve the learning objectives, tissue pliability was rated higher for Thiel-embalmed tissues. Ethanol-glycerin embalming appears to offer certain advantages for undergraduate students in recognizing visceral structures, which may align with students' ideas on tissue suitability for their learning. Consequently, the benefits reported for Thiel embalming for postgraduate study unlikely reflect its suitability for novices.

[Path to growth or open wound? The quest for meaning and coping with trauma in patients with posttraumatic stress disorder]. / Wachstum oder Wunde? Sinnfindung und Traumabewaltigung bei Patienten mit posttraumatischer Belastungsstorung.

OBJECTIVES: This study investigated the relationship between meaning in life and coping with trauma, and correlations between posttraumatic growth and mental health. METHODS: The content and structure of the personal meaning systems of 62 patients suffering from posttraumatic stress disorder (PTSD) were assessed qualitatively. In addition, the participants completed questionnaires measuring meaning in life (LRI-r-d; MLQ), PTSD symptoms (IES-R), depression (BDI-II), health-related quality of life (EQ-5D), satisfaction with life (SWLS) and posttraumatic growth (PPR-r). RESULTS: A stronger sense of meaning in life and a more elaborately structured personal meaning system correlated with a better mental health and more posttraumatic growth. Posttraumatic growth was also associated with mental health. CONCLUSIONS: Patients with coherent personal meaning systems are more successful in coping with traumatic life events. They also reported more posttraumatic growth.

Neuroanatomy of the male pelvis in respect to radical prostatectomy including three-dimensional visualization.

The neuroanatomical structures of the radical prostatectomy (RP) are extensively discussed for their existence, localization and function. Especially structures, e.g. the so-called neurovascular bundle (NVB) that are points of debate in numerous anatomical studies. We review the literature and present our observations in cadaveric specimens, to reconstruct neuroanatomical structures in three dimensions (3D) with the use of appropriate computer applications and produce images of operative fields. We used an internet PubMed survey (http://www.ncbi.nlm.nih.gov) to review recent publications and included back copies of historical neuroanatomical studies from our own library. Our own experimental cadaveric (specimens preserved in Thiel's solution) studies of the autonomic nerve supply of the lower urinary tract were also reviewed. Visualization of the pelvic anatomy and neuroanatomy was done using computer-based software packages. No unified terminology for the structures of the NVBs can be presented to date. The innervation of the smooth muscular structures of the urethra and the complex morphology of urethral sphincter remain unclear. Our cadaveric studies showed that nerves are located on the lateral aspect of the prostate in addition to the NVBs described at the dorsolateral side of the prostate. The neuroanatomical investigations of the male pelvis and visualization of the structures in 3D enable the presentation of operative sites as seen intraoperatively. Moreover, dynamic depiction of the pelvic floor is also possible.

[Meaning in life and mental health: personal meaning systems of psychotherapists and psychotherapy patients]. / Individuelle Sinnkonstruktionen und seelische Gesundheit: Ein Vergleich von Psychotherapeuten und Psychotherapiepatienten.

OBJECTIVES: This study investigated differences in the personal meaning systems of psychotherapists and psychotherapy patients as well as correlations between meaning in life and mental health. METHODS: We qualitatively assessed the content and structure of the personal meaning systems of 41 psychotherapists and 77 psychotherapy patients. In addition, the participants completed questionnaires measuring meaning in life (LRI-r-d), sense of coherence (SOC-9L), self-esteem (RSES), satisfaction with life (SWLS), self-efficacy (SWK), and depression (BDI). RESULTS: The personal meaning systems of psychotherapists were more complex and coherent compared to psychotherapy patients. In the group of psychotherapy patients, a more elaborate structure of the personal meaning system correlated with the subjective sense of meaning. We were able to confirm correlations between meaning in life and mental health for most of the instances. CONCLUSIONS: Psychotherapists had more elaborate and coherent meaning systems than psychotherapy patients. Especially for psychotherapy patients elaborate and coherent meaning systems turned out to be important for mental health.

Phenoxyethanol-Based Embalming for Anatomy Teaching: An 18 Years' Experience with Crosado Embalming at the University of Otago in New Zealand.

Embalming fixatives such as formaldehyde and phenol have been associated with occupational health hazards. While anatomists aim at replacing these chemicals, this seems presently unfeasible in particular for formaldehyde. Furthermore, fixation protocols usually require well-equipped facilities with highly experienced staff to achieve good fixation results in spite of only a minimal use of formaldehyde. Combining these aspects, a technique robust enough to be carried out by morticians is presented, resulting in durable tissues with minimal formaldehyde use. An embalming protocol involving phenoxyethanol was established, using concentrations of 7 and 1.5 Vol% of phenoxyethanol in the fixative and the conservation fluid, respectively. Visual, haptic, histological, and biomechanical properties and their perceived potential to positively influence student learning outcomes were compared to standard embalming techniques. The phenoxyethanol technique provides esthetic, durable, and odorless tissues. Bleaching is less pronounced compared to ethanol- or formaldehyde-based protocols. The tissues remain pliable following the phenoxyethanol-based embalming and can be used for biomechanical experiments to some extent. Phenoxyethanol-fixed tissues are well suited for undergraduate teaching with perceived positive learning outcomes and partly for postgraduate training. Phenoxyethanol tissues provide the option to obtain well-preserved histology samples, similar to those derived from formaldehyde. The provided protocol helps replace the use of phenol and formaldehyde for conservation purposes and minimizes the use of formaldehyde for the initial injection fixation. Phenoxyethanol-based embalming forms an effective alternative to standard embalming techniques for human cadavers. It is simple to use, allowing fixation procedures to be carried out in less sophisticated facilities with non-anatomy staff.

[Social phobia - the blind spot: infrequently diagnosed, highly complex, and a predictor for unfavourable therapy outcomes?]. / Die Sozialphobie als blinder Fleck: Klinisch unterdiagnostiziert, hoher Schweregrad und ungünstiger Verlauf?

OBJECTIVES: The objectives of the study were to examine (1) whether patients with social phobia report higher symptom load at the beginning and at the end of treatment and 1 year after treatment; and (2) whether the presence of social phobia is a factor that influences the course of treatment. METHODS: 613 patients from a university hospital for psychosomatic medicine filled out questionnaires assessing symptom load (SCL 90-R, KOPS), physical symptoms, psychological and social impairment (KOPS), and depression (BDI). Social phobia was diagnosed based on a standardized diagnostic interview. RESULTS: 25%of the patients suffered from social phobia. They had significantly more concurrent mental disorders (4.18 vs. 2.41) and a higher symptom load than patients suffering from other mental disorders. They reported more physical complaints and depression and felt more impaired psychologically as well as socially. Even though both groups of patients profited from the treatment, compared to other patients, social phobia patients still had higher symptom load, impairment, and depression scores at the end of treatment and even at the follow-up 1 year after treatment. DISCUSSION: Social phobia is a severe disorder in which concurrent disorders frequently cause a high level of distress and impairment. These patients may benefit more from longer courses of treatment and/or disorder-specific treatment elements. Diagnostic and therapy approaches tailored to the generalized type of social anxiety are discussed.

Cervical vagus nerve morphometry and vascularity in the context of nerve stimulation - A cadaveric study.

Vagus nerve stimulation (VNS) has become a well-established therapy for epilepsy and depression, and is emerging to treat inflammatory disease, with the cervical vagus nerve (CVN) as major stimulation site. CVN morphometries are missing for VNS, considering its variability. Morphometric data were obtained from CVNs in 27 cadavers, including branching patterns and histology. Cross-sectional area, greater and lesser diameters averaged 7.2 ± 3.1 mm2, 5.1 ± 1.5 and 4.1 ± 1.3 mm, and were ≤11.0 mm2, ≤7.0 and ≤5.8 mm in 90% of the specimens, respectively. Midline distance (position lateral to the laryngeal eminence) and skin distance (anterior-posterior from skin) averaged 34.5 ± 6.2 and 36.2 ± 9.4 mm, ≤49.0 and ≤41.0 mm in 90%, respectively. Nerve dimensions and surface topography correlated closely, but without gender-, side- or branching-dependent differences. The nerve fascicle number averaged 5.2 ± 3.5. Vagal arteries were observed in 49% of the cases. Negative correlations were found for age and cross-sectional area, as well as subperineural vessel count. Detailed anatomical data on the CVN and its vascularity are given, forming the morphometric basis for VNS refinement, filling an evident gap in light of the CVN being a structure with variable positions and branching. A 35 × 35-mm rule may apply for the CVN position, irrespective of branching or positional variation.

A novel phased-concept course for the delivery of anatomy and orthopedics training in medical education.

Integration of anatomy and clinical teaching is a theoretical ideal, yet there is a worldwide paucity of such amalgamation. These teaching models provide support for medical trainees, an important element in Germany where orthopedic intern numbers have declined and anecdotal evidence suggests disinterest in orthopedics. The aim of the study was to develop an integrated anatomy-surgical course for undergraduate medical training, assess the model developed, and explore how medical students perceive orthopedics as a career. The course was to deliver medical anatomy and clinical orthopedic training, focusing on interdisciplinary teaching and learning, vertical integration of clinical knowledge and skills, and professional interaction. Survey evaluation of the course and students' perceptions of orthopedic careers was performed, including Likert-type responses rating variables of interest. A phased-concept program of five courses, each optional and under one-week in duration, was developed parallel to the undergraduate medical program. Delivered by anatomists and surgeons, courses included biomechanics, advanced dissection, surgical approaches, casts and implants, and sports medicine. Course data indicate positive support for course format, stimulation of interest, and high clinical relevance. Students are generally interested in surgery, and identify hierarchy, lawsuits, bureaucracy and physical stress as barriers to orthopedic careers. This novel phased-concept successfully delivers combined anatomy and surgery training in a vertically-integrated format while addressing students' clinical and professional skills. The format facilitates an appreciation of potential career options in orthopedics, while fostering professional skills during medical training. Barriers to careers in orthopedics can now be addressed in future courses. Anat Sci Educ 10: 372-382. © 2016 American Association of Anatomists.

Can the Diagnostics of Triangular Fibrocartilage Complex Lesions Be Improved by MRI-Based Soft-Tissue Reconstruction? An Imaging-Based Workup and Case Presentation.

Introduction. The triangular fibrocartilage complex (TFCC) provides both mobility and stability of the radiocarpal joint. TFCC lesions are difficult to diagnose due to the complex anatomy. The standard treatment for TFCC lesions is arthroscopy, posing surgery-related risks onto the patients. This feasibility study aimed at developing a workup for soft-tissue reconstruction using clinical imaging, to verify these results in retrospective patient data. Methods. Microcomputed tomography (µ-CT), 3 T magnetic resonance imaging (MRI), and plastination were used to visualize the TFCC in cadaveric specimens applying segmentation-based 3D reconstruction. This approach further trialed the MRI dataset of a patient with minor radiological TFCC alterations but persistent pain. Results. TFCC reconstruction was impossible using µ-CT only but feasible using MRI, resulting in an appreciation of its substructures, as seen in the plastinates. Applying this approach allowed for visualizing a Palmer 2C lesion in a patient, confirming ex postum the arthroscopy findings, being markedly different from MRI (Palmer 1B). Discussion. This preliminary study showed that image-based TFCC reconstruction may help to identify pathologies invisible in standard MRI. The combined approach of µ-CT, MRI, and plastination allowed for a three-dimensional appreciation of the TFCC. Image quality and time expenditure limit the approach's usefulness as a diagnostic tool.