A functional RNA-origami as direct thrombin inhibitor with fast-acting and specific single-molecule reversal agents in vivo model.

Injectable anticoagulants are widely used in medical procedures to prevent unwanted blood clotting. However, many lack safe, effective reversal agents. Here, we present new data on a previously described RNA origami-based, direct thrombin inhibitor (HEX01). We describe a new, fast-acting, specific, single-molecule reversal agent (antidote) and present in vivo data for the first time, including efficacy, reversibility, preliminary safety, and initial biodistribution studies. HEX01 contains multiple thrombin-binding aptamers appended on an RNA origami. It exhibits excellent anticoagulation activity in vitro and in vivo. The new single-molecule, DNA antidote (HEX02) reverses anticoagulation activity of HEX01 in human plasma within 30 s in vitro and functions effectively in a murine liver laceration model. Biodistribution studies of HEX01 in whole mice using ex vivo imaging show accumulation mainly in the liver over 24 h and with 10-fold lower concentrations in the kidneys. Additionally, we show that the HEX01/HEX02 system is non-cytotoxic to epithelial cell lines and non-hemolytic in vitro. Furthermore, we found no serum cytokine response to HEX01/HEX02 in a murine model. HEX01 and HEX02 represent a safe and effective coagulation control system with a fast-acting, specific reversal agent showing promise for potential drug development.

Utilizing multiscale engineered biomaterials to examine TGF-ß-mediated myofibroblastic differentiation.

Cells integrate many mechanical and chemical cues to drive cell signalling responses. Because of the complex nature and interdependency of alterations in extracellular matrix (ECM) composition, ligand density, mechanics, and cellular responses it is difficult to tease out individual and combinatorial contributions of these various factors in driving cell behavior in homeostasis and disease. Tuning of material viscous and elastic properties, and ligand densities, in combinatorial fashions would enhance our understanding of how cells process complex signals. For example, it is known that increased ECM mechanics and transforming growth factor beta (TGF-ß) receptor (TGF-ß-R) spacing/clustering independently drive TGF-ß signalling and associated myofibroblastic differentiation. However, it remains unknown how these inputs orthogonally contribute to cellular outcomes. Here, we describe the development of a novel material platform that combines microgel thin films with controllable viscoelastic properties and DNA origami to probe how viscoelastic properties and nanoscale spacing of TGF-ß-Rs contribute to TGF-ß signalling and myofibroblastic differentiation. We found that highly viscous materials with non-fixed TGF-ß-R spacing promoted increased TGF-ß signalling and myofibroblastic differentiation. This is likely due to the ability of cells to better cluster receptors on these surfaces. These results provide insight into the contribution of substrate properties and receptor localisation on downstream signalling. Future studies allow for exploration into other receptor-mediated processes.

Self-Assembling Nucleic Acid Nanostructures Functionalized with Aptamers.

Researchers have worked for many decades to master the rules of biomolecular design that would allow artificial biopolymer complexes to self-assemble and function similarly to the diverse biochemical constructs displayed in natural biological systems. The rules of nucleic acid assembly (dominated by Watson-Crick base-pairing) have been less difficult to understand and manipulate than the more complicated rules of protein folding. Therefore, nucleic acid nanotechnology has advanced more quickly than de novo protein design, and recent years have seen amazing progress in DNA and RNA design. By combining structural motifs with aptamers that act as affinity handles and add powerful molecular recognition capabilities, nucleic acid-based self-assemblies represent a diverse toolbox for use by bioengineers to create molecules with potentially revolutionary biological activities. In this review, we focus on the development of self-assembling nucleic acid nanostructures that are functionalized with nucleic acid aptamers and their great potential in wide ranging application areas.

pH-Driven Actuation of DNA Origami via Parallel I-Motif Sequences in Solution and on Surfaces.

As bottom up DNA nanofabrication creates increasingly complex and dynamic mechanisms, the implementation of actuators within the DNA nanotechnology toolkit has grown increasingly important. One such actuator, the I-motif, is fairly simple in that it consists solely of standard DNA sequences and does not require any modification chemistry or special purification beyond that typical for DNA oligomer synthesis. This study presents a new implementation of parallel I-motif actuators, emphasizing their future potential as drivers of complex internal motion between substructures. Here we characterize internal motion between DNA origami substructures via AFM and image analysis. Such parallel I-motif design and quantification of actuation provide a useful step toward more complex and effective molecular machines.

Design of Potent and Controllable Anticoagulants Using DNA Aptamers and Nanostructures.

The regulation of thrombin activity offers an opportunity to regulate blood clotting because of the central role played by this molecule in the coagulation cascade. Thrombin-binding DNA aptamers have been used to inhibit thrombin activity. In the past, to address the low efficacy reported for these aptamers during clinical trials, multiple aptamers have been linked using DNA nanostructures. Here, we modify that strategy by linking multiple copies of various thrombin-binding aptamers using DNA weave tiles. The resulting constructs have very high anticoagulant activity in functional assays owing to their improved cooperative binding affinity to thrombin due to optimized spacing, orientation, and the high local concentration of aptamers. We also report the results of molecular dynamics simulations to gain insight into the solution conformations of the tiles. Moreover, by using DNA strand displacement, we were able to turn the coagulation cascade off and on as desired, thereby enabling significantly better control over blood coagulation.

Building DNA nanostructures for molecular computation, templated assembly, and biological applications.

CONSPECTUS: DNA is a critical biomolecule well-known for its roles in biology and genetics. Moreover, its double-helical structure and the Watson-Crick pairing of its bases make DNA structurally predictable. This predictability enables design and synthesis of artificial DNA nanostructures by suitable programming of the base sequences of DNA strands. Since the advent of the field of DNA nanotechnology in 1982, a variety of DNA nanostructures have been designed and used for numerous applications. In this Account, we discuss the progress made by our lab which has contributed toward the overall advancement of the field. Tile-based DNA nanostructures are an integral part of structural DNA nanotechnology. These structures are formed using several short, chemically synthesized DNA strands by programming their base sequences so that they self-assemble into desired constructs. Design and assembly of several DNA tiles will be discussed in this Account. Tiles include, for example, TX tiles with three parallel, coplanar duplexes, 4 × 4 cross-tiles with four arms, and weave-tiles with weave-like architecture. Another category of tiles we will present involve multiple parallel duplexes that assemble to form closed tubular structures. All of these tile types have been used to form micrometer-scale one- and two-dimensional arrays and lattices. Origami-based structures constitute another category where a long single-stranded DNA scaffold is folded into desired shapes by association with multiple short staple strands. This Account will describe the efforts by our lab in devising new strategies to improve the maximum size of origami structures. The various DNA nanostructures detailed here have been used in a wide variety of different applications. This Account will discuss the use of DNA tiles for logical computation, encoding information as molecular barcodes, and functionalization for patterning of other nanoscale organic and inorganic materials. Consequently, we have used DNA nanostructures for templating metallic nanowires as well as for programmed assembly of proteins and nanoparticles with controlled spacings. Among other applications, we have used DNA nanotechnology in biosensors that detect target DNA sequences and to affect cell surface receptor clustering for communicating with a cell signaling pathway. We used DNA weave-tiles to control the spacing between thrombin-binding aptamers which resulted in very high antithrombin and anticoagulant activity of the construct. We believe that the tremendous progress in DNA nanotechnology over the past three decades will open even more research avenues in the near future for applications in a wide variety of disciplines including electronics, photonics, biomedical engineering, biosensing, therapeutics, and nucleic-acid-based drug delivery.

Toward larger DNA origami.

Structural DNA nanotechnology, and specifically scaffolded DNA origami, is rapidly developing as a versatile method for bottom-up fabrication of novel nanometer-scale materials and devices. However, lengths of conventional single-stranded scaffolds, for example, 7,249-nucleotide circular genomic DNA from the M13mp18 phage, limit the scales of these uniquely addressable structures. Additionally, increasing DNA origami size generates the cost burden of increased staple-strand synthesis. We addressed this 2-fold problem by developing the following methods: (1) production of the largest to-date biologically derived single-stranded scaffold using a λ/M13 hybrid virus to produce a 51 466-nucleotide DNA in a circular, single-stranded form and (2) inexpensive DNA synthesis via an inkjet-printing process on a chip embossed with functionalized micropillars made from cyclic olefin copolymer. We have experimentally demonstrated very efficient assembly of a 51-kilobasepair origami from the λ/M13 hybrid scaffold folded by chip-derived staple strands. In addition, we have demonstrated two-dimensional, asymmetric origami sheets with controlled global curvature such that they land on a substrate in predictable orientations that have been verified by atomic force microscopy.

Comparative Incorporation of PNA into DNA Nanostructures.

DNA has shown great promise as a building material for self-assembling nanoscale structures. To further develop the potential of this technology, more methods are needed for functionalizing DNA-based nanostructures to increase their chemical diversity. Peptide nucleic acid (PNA) holds great promise for realizing this goal, as it conveniently allows for inclusion of both amino acids and peptides in nucleic acid-based structures. In this work, we explored incorporation of a positively charged PNA within DNA nanostructures. We investigated the efficiency of annealing a lysine-containing PNA probe with complementary, single-stranded DNA sequences within nanostructures, as well as the efficiency of duplex invasion and its dependence on salt concentration. Our results show that PNA allows for toehold-free strand displacement and that incorporation yield depends critically on binding site geometry. These results provide guidance for the design of PNA binding sites on nucleic acid nanostructures with an eye towards optimizing fabrication yield.

Programmable DNA tile self-assembly using a hierarchical sub-tile strategy.

DNA tile based self-assembly provides a bottom-up approach to construct desired nanostructures. DNA tiles have been directly constructed from ssDNA and readily self-assembled into 2D lattices and 3D superstructures. However, for more complex lattice designs including algorithmic assemblies requiring larger tile sets, a more modular approach could prove useful. This paper reports a new DNA 'sub-tile' strategy to easily create whole families of programmable tiles. Here, we demonstrate the stability and flexibility of our sub-tile structures by constructing 3-, 4- and 6-arm DNA tiles that are subsequently assembled into 2D lattices and 3D nanotubes according to a hierarchical design. Assembly of sub-tiles, tiles, and superstructures was analyzed using polyacrylamide gel electrophoresis and atomic force microscopy. DNA tile self-assembly methods provide a bottom-up approach to create desired nanostructures; the sub-tile strategy adds a useful new layer to this technique. Complex units can be made from simple parts. The sub-tile approach enables the rapid redesign and prototyping of complex DNA tile sets and tiles with asymmetric designs.

Sensitization of transforming growth factor-ß signaling by multiple peptides patterned on DNA nanostructures.

We report sensitization of a cellular signaling pathway by addition of functionalized DNA nanostructures. Signaling by transforming growth factor ß (TGFß) has been shown to be dependent on receptor clustering. By patterning a DNA nanostructure with closely spaced peptides that bind to TGFß receptor, we observe increased sensitivity of NMuMG cells to TGFß ligand. This is evidenced by translocation of secondary messenger proteins to the nucleus and stimulation of an inducible luciferase reporter at lower concentrations of TGFß ligand. We believe this represents an important initial step toward realization of DNA as a self-assembling and biologically compatible material for use in tissue engineering and drug delivery.

Production and Testing of RNA Origami Anticoagulants.

Nucleic acid nanotechnology provides the ability to create unprecedented nanostructures with diverse architectures and functions that can be utilized in myriad fields. A set of self-folding, single-stranded RNA origami structures bearing thrombin RNA aptamers have been demonstrated to act as anticoagulants. Here, we describe the detailed methods of producing and testing of such RNA origami anticoagulants. This method highlights the potential of RNA origami for biomedical applications.

Increased anticoagulant activity of thrombin-binding DNA aptamers by nanoscale organization on DNA nanostructures.

Control over thrombin activity is much desired to regulate blood clotting in surgical and therapeutic situations. Thrombin-binding RNA and DNA aptamers have been used to inhibit thrombin activity and thus the coagulation cascade. Soluble DNA aptamers, as well as two different aptamers tethered by a flexible single-strand linker, have been shown to possess anticoagulant activity. Here, we link multiple aptamers at programmed positions on DNA nanostructures to optimize spacing and orientation of the aptamers and thereby to maximize anticoagulant activity in functional assays. By judicious engineering of the DNA nanostructures, we have created a novel, functional DNA nanostructure, which is a multi-aptamer inhibitor with activity eightfold higher than free aptamer. Reversal of the thrombin inhibition was also achieved by the use of single-stranded DNA antidotes, thus enabling significant control over blood coagulation. FROM THE CLINICAL EDITOR: Thrombin inhibition via DNA aptamers has recently become a possibility. In this study, thrombin-binding DNA aptamers were further optimized by nanoscale organization on DNA nanostructures. The authors have created a novel, functional DNA nanostructure, which is a multi-aptamer inhibitor with activity eightfold higher than that of free aptamer. Reversal of thrombin inhibition was also achieved by single-stranded DNA antidotes, enabling significant control over the coagulation pathway.

Modeling and characterization of stochastic resistive switching in single Ag2S nanowires.

Chalcogenide resistive switches (RS), such as Ag2S, change resistance due to the growth of metallic filaments between electrodes along the electric field gradient. Therefore, they are candidates for neuromorphic and volatile memory applications. This work analyzed the RS of individual Ag2S nanowires (NWs) and extended the basic RS model to reproduce experimental observations. The work models resistivity of the device as a percolation of the conductive filaments. It also addressed continuous fluctuations of the resistivity with a stochastic change in volume fractions of the filaments in the device. As a result, these fluctuations cause unpredictable patterns in current-voltage characteristics and include a spontaneous change in resistance of the device during the linear sweep that conventional memristor models with constant resistivity cannot represent. The parameters of the presented stochastic model of a single Ag2S NW were fitted to the experimental data and reproduced key features of RS in the physical devices. Moreover, the model suggested a non-core shell structure of the Ag2S NWs. The outcome of this work is aimed to aid in simulating large self-assembled memristive networks and help to extend existing RS models.

DNA aerogels and DNA-wrapped CNT aerogels for neuromorphic applications.

Nucleic acids are programmable materials that can self-assemble into defined or stochastic three-dimensional network architectures. Various attributes of self-assembled, cross-linked Deoxyribonucleic acid (DNA) hydrogels have recently been investigated, including their mechanical properties and potential biomedical functions. Herein, for the first time, we describe the successful construction of pure DNA aerogels and DNA-wrapped carbon nanotube (CNT) composite (DNA-CNT) aerogels via a single-step freeze-drying of the respective hydrogels. These aerogels reveal highly porous and randomly branched structures with low density. The electrical properties of pure DNA aerogel mimic that of a simple capacitor; in contrast, the DNA-CNT aerogel displays a fascinating resistive switching behavior in response to an applied bias voltage sweep reminiscent of a volatile memristor. We believe these novel aerogels can serve as a platform for developing complex biomimetic devices for a wide range of applications, including real-time computation, neuromorphic computing, biochemical sensing, and biodegradable functional implants. More importantly, insight obtained here on self-assembling DNA to create aerogels will pave the way to construct novel aerogel-based material platforms from DNA coated or wrapped functional entities.

Design and construction of double-decker tile as a route to three-dimensional periodic assembly of DNA.

DNA is a useful material for nanoscale construction. Due to highly specific Watson-Crick base pairing, the DNA sequences can be designed to form small tiles or origami. Adjacent helices in such nanostructures are connected via Holliday junction-like crossovers. DNA tiles can have sticky ends which can then be programmed to form large one-dimensional and two-dimensional periodic lattices. Recently, a three-dimensional DNA lattice has also been constructed. Here we report the design and construction of a novel DNA cross tile, called the double-decker tile. Its arms are symmetric and have four double helices each. Using its sticky ends, large two-dimensional square lattices have been constructed which are on the order of tens of micrometers. Furthermore, it is proposed that the sticky ends of the double-decker tile can be programmed to form a three-dimensional periodic lattice with large cavities that could be used as a scaffold for precise positioning of molecules in space.

Design and synthesis of DNA four-helix bundles.

The field of DNA nanotechnology has evolved significantly in the past decade. Researchers have succeeded in synthesizing tile-based structures and using them to form periodic lattices in one, two and three dimensions. Origami-based structures have also been used to create nanoscale structures in two and three dimensions. Design and construction of DNA bundles with fixed circumference has added a new dimension to the field. Here we report the design and synthesis of a DNA four-helix bundle. It was found to be extremely rigid and stable. When several such bundles were assembled using appropriate sticky-ends, they formed micrometre-long filaments. However, when creation of two-dimensional sheet-like arrays of the four-helix bundles was attempted, nanoscale rings were observed instead. The exact reason behind the nanoring formation is yet to be ascertained, but it provides an exciting prospect for making programmable circular nanostructures using DNA.

Intrinsic DNA curvature of double-crossover tiles.

A theoretical model which takes into account the structural distortion of double-crossover DNA tiles has been studied to investigate its effect on lattice formation sizes. It has been found that a single vector appropriately describes the curvature of the tiles, of which a higher magnitude hinders lattice growth. In conjunction with these calculations, normal mode analysis reveals that tiles with relative higher frequencies have an analogous effect. All the theoretical results are shown to be in good agreement with experimental data.

Multivalent Aptamer-Functionalized Single-Strand RNA Origami as Effective, Target-Specific Anticoagulants with Corresponding Reversal Agents.

Anticoagulants are commonly utilized during surgeries and to treat thrombotic diseases like stroke and deep vein thrombosis. However, conventional anticoagulants have serious side-effects, narrow therapeutic windows, and lack safe reversal agents (antidotes). Here, an alternative RNA origami displaying RNA aptamers as target-specific anticoagulant is described. Improved design and construction techniques for self-folding, single-molecule RNA origami as a platform for displaying pre-selected RNA aptamers with precise orientational and spatial control are reported. Nuclease resistance is added using 2'-fluoro-modified pyrimidines during in vitro transcription. When four aptamers are displayed on the RNA origami platform, the measured thrombin inhibition and anticoagulation activity is higher than observed for free aptamers, ssRNA-linked RNA aptamers, and RNA origami displaying fewer aptamers. Importantly, thrombin inhibition is immediately switched off by addition of specific reversal agents. Results for single-stranded DNA (ssDNA) and single-stranded peptide nucleic acid (PNA) antidotes show restoration of 63% and 95% coagulation activity, respectively. To demonstrate potential for practical, long-term storage for clinical use, RNA origami is freeze-dried, and stored at room temperature. Freshly produced and freeze-dried RNA show identical levels of activity in coagulation assays. Compared to current commercial intravenous anticoagulants, RNA origami-based molecules show promise as safer alternatives with rapid activity switching for future therapeutic applications.

Weave tile architecture construction strategy for DNA nanotechnology.

Architectural designs for DNA nanostructures typically fall within one of two broad categories: tile-based designs (assembled from chemically synthesized oligonucleotides) and origami designs (woven structures employing a biological scaffold strand and synthetic staple strands). Both previous designs typically contain many Holliday-type multi-arm junctions. Here we describe the design, implementation, and testing of a unique architectural strategy incorporating some aspects of each of the two previous design categories but without multi-arm junction motifs. Goals for the new design were to use only chemically synthesized DNA, to minimize the number of component strands, and to mimic the back-and-forth, woven strand routing of the origami architectures. The resulting architectural strategy employs "weave tiles" formed from only two oligonucleotides as basic building blocks, thus decreasing the burden of matching multiple strand stoichiometries compared to previous tile-based architectures and resulting in a structurally flexible tile. As an example application, we have shown that the four-helix weave tile can be used to increase the anticoagulant activity of thrombin-binding aptamers in vitro.