Push-Pull Carbazole-Based Dyes: Synthesis, Strong Ultrafast Nonlinear Optical Response, and Effective Photoinitiation for Multiphoton Lithography.

The present work reports on the ultrafast nonlinear optical (NLO) properties of a series of D-π-Α and D-A push-pull carbazole-based dyes and establishes a correlation between these properties and their efficiency for potential photonic and optoelectronic applications such as multiphoton lithography (MPL). The ultrafast NLO properties of the studied dyes are determined by two distinct experimental techniques, Z-scan and pump-probe optical Kerr effect (OKE), employing 246 fs laser pulses at 515 nm. The results indicate that chemical functionalization of the carbazole moiety with various strong electron-donating and/or electron-withdrawing groups, such as benzene, styrene, 4-bromostyrene, nitrobenzene, trimethyl isocyanurate, methyl, and indane-1,3-dione, can result in a controlled and significant enhancement of the NLO absorptive and refractive responses. In the context of potential applications, the efficiency of carbazole-based organic materials as photoinitiators (PIs) for MPL applications is demonstrated. The fabricated woodpile microstructure using chemically functionalized carbazole as a PI demonstrates improvements in both feature size and MPL efficiency compared to that using unfunctionalized carbazole as a PI. This is attributed to the efficient charge transfer resulting from chemical functionalization, which leads to a substantial increase (approximately 1 order of magnitude) in the values of the imaginary part of the second-order hyperpolarizability (Imγ) and the two-photon absorption cross section (σ). The achieved feature size of 280 nm is comparable to that obtained with other widely used PIs in MPL applications. Additionally, owing to the strong NLO properties of the studied functionalized carbazole, they could also be promising candidates for further applications in photonics and optoelectronics.

Functionalized Soybean Oil- and Vanillin-Based Dual Cure Photopolymerizable System for Light-Based 3D Structuring.

A novel dual cure photopolymerizable system was developed by combining two plant-derived acrylic monomers, acrylated epoxidized soybean oil and vanillin dimethacrylate, as well as the thiol monomer pentaerythritol tetrakis (3-mercaptopropionate). Carefully selected resin composition allowed the researchers to overcome earlier stability/premature polymerization problems and to obtain stable (up to six months at 4 °C) and selectively-polymerizable resin. The resin demonstrated rapid photocuring without an induction period and reached a rigidity of 317.66 MPa, which was more than 20 times higher than that of the other vanillin-based polymers. Improved mechanical properties and thermal stability of the resulting cross-linked photopolymer were obtained compared to similar homo- and copolymers: Young's modulus reached 4753 MPa, the compression modulus reached 1634 MPa, and the temperature of 10% weight loss was 373 °C. The developed photocurable system was successfully applied in stereolithography and characterized with femtosecond pulsed two-beam initiation threshold measurement for the first time. The polymerization threshold of the investigated polymer was determined to be controlled by the sample temperature, making the footprint of the workstations cheaper, faster, and more reliable.