RESUMO
Variation in genome structure is an important source of human genetic polymorphism: It affects a large proportion of the genome and has a variety of phenotypic consequences relevant to health and disease. In spite of this, human genome structure variation is incompletely characterized due to a lack of approaches for discovering a broad range of structural variants in a global, comprehensive fashion. We addressed this gap with Optical Mapping, a high-throughput, high-resolution single-molecule system for studying genome structure. We used Optical Mapping to create genome-wide restriction maps of a complete hydatidiform mole and three lymphoblast-derived cell lines, and we validated the approach by demonstrating a strong concordance with existing methods. We also describe thousands of new variants with sizes ranging from kb to Mb.
Assuntos
Genoma Humano , Mapeamento por Restrição Óptica/métodos , Algoritmos , Linhagem Celular , Linhagem Celular Tumoral , Feminino , Variação Genética , Estudo de Associação Genômica Ampla , Humanos , Mola Hidatiforme/genética , Linfócitos/metabolismo , Mapeamento por Restrição Óptica/estatística & dados numéricos , Gravidez , Neoplasias Uterinas/genéticaRESUMO
The ascomycetous fungus Nectria haematococca, (asexual name Fusarium solani), is a member of a group of >50 species known as the "Fusarium solani species complex". Members of this complex have diverse biological properties including the ability to cause disease on >100 genera of plants and opportunistic infections in humans. The current research analyzed the most extensively studied member of this complex, N. haematococca mating population VI (MPVI). Several genes controlling the ability of individual isolates of this species to colonize specific habitats are located on supernumerary chromosomes. Optical mapping revealed that the sequenced isolate has 17 chromosomes ranging from 530 kb to 6.52 Mb and that the physical size of the genome, 54.43 Mb, and the number of predicted genes, 15,707, are among the largest reported for ascomycetes. Two classes of genes have contributed to gene expansion: specific genes that are not found in other fungi including its closest sequenced relative, Fusarium graminearum; and genes that commonly occur as single copies in other fungi but are present as multiple copies in N. haematococca MPVI. Some of these additional genes appear to have resulted from gene duplication events, while others may have been acquired through horizontal gene transfer. The supernumerary nature of three chromosomes, 14, 15, and 17, was confirmed by their absence in pulsed field gel electrophoresis experiments of some isolates and by demonstrating that these isolates lacked chromosome-specific sequences found on the ends of these chromosomes. These supernumerary chromosomes contain more repeat sequences, are enriched in unique and duplicated genes, and have a lower G+C content in comparison to the other chromosomes. Although the origin(s) of the extra genes and the supernumerary chromosomes is not known, the gene expansion and its large genome size are consistent with this species' diverse range of habitats. Furthermore, the presence of unique genes on supernumerary chromosomes might account for individual isolates having different environmental niches.
Assuntos
Cromossomos Fúngicos/genética , Genoma Fúngico , Nectria/genética , Composição de Bases , Cromossomos Fúngicos/química , Fungos/classificação , Fungos/genética , Duplicação Gênica , Nectria/química , Nectria/classificação , FilogeniaRESUMO
Microfluidic cell-based systems have enabled the study of cellular phenomena with improved spatiotemporal control of the microenvironment and at increased throughput. While poly(dimethylsiloxane) (PDMS) has emerged as the most popular material in microfluidics research, it has specific limitations that prevent microfluidic platforms from achieving their full potential. We present here a complete process, ranging from mold design to embossing and bonding, that describes the fabrication of polystyrene (PS) microfluidic devices with similar cost and time expenditures as PDMS-based devices. Emphasis was placed on creating methods that can compete with PDMS fabrication methods in terms of robustness, complexity, and time requirements. To achieve this goal, several improvements were made to remove critical bottlenecks in existing PS embossing methods. First, traditional lithographic techniques were adapted to fabricate bulk epoxy molds capable of resisting high temperatures and pressures. Second, a method was developed to emboss through-holes in a PS layer, enabling creation of large arrays of independent microfluidic systems on a single device without need to manually create access ports. Third, thermal bonding of PS layers was optimized in order to achieve quality bonding over large arrays of microsystems. The choice of materials and methods was validated for biological function in two different cell-based applications to demonstrate the versatility of our streamlined fabrication process.
Assuntos
Células Endoteliais/metabolismo , Técnicas Analíticas Microfluídicas/instrumentação , Microtecnologia/métodos , Poliestirenos/química , Difusão , Dimetilpolisiloxanos/química , Compostos de Epóxi/química , Desenho de Equipamento , Humanos , Impressão , Reprodutibilidade dos Testes , Propriedades de Superfície , Temperatura , Fatores de TempoRESUMO
Multi-well assays based on the Boyden chamber have enabled highly parallel studies of chemotaxis-the directional migration of cells in response to molecular gradients-while direct-viewing approaches have allowed more detailed questions to be asked at low throughput. Boyden-based plates provide a count of cells that pass through a membrane, but no information about cell appearance. In contrast, direct-viewing devices enable the observation of cells during chemotaxis, which allows measurement of many parameters including area, shape, and location. Here we show automated chemotaxis and cell morphology assays in a 96-unit direct-viewing plate. Using only 12000 primary human neutrophils per datum, we measured dose-dependent stimulation and inhibition of chemotaxis and quantified the effects of inhibitors on cell area and elongation. With 60 parallel conditions we demonstrated 5-fold increase in throughput compared to previously reported direct-viewing approaches.
Assuntos
Quimiotaxia de Leucócito/imunologia , Técnicas Imunológicas , Neutrófilos/imunologia , Desenho de Equipamento , Humanos , Interleucina-8/imunologia , Técnicas Analíticas Microfluídicas , Neutrófilos/citologia , Proteínas Recombinantes/imunologiaRESUMO
High-content tumor cell migration assays in 3-dimensional (3D) extracellular matrix are a powerful tool for modeling and understanding the biology of this critical step in the process of metastasis. Currently available methods offer very limited throughput and are not amenable to studies of comparative pharmacology or small-scale screening. The authors present an automated approach to high-content tumor cell migration assays. A standard screening-sized plate with an array of microchannels was designed and constructed from common thermoplastics. After filling the channels with 3D matrix, cells were placed at one end of the channel, and migration into the channel was monitored via an imaging system. All liquid-handling steps were performed by standard liquid-handling robotics. Tumor cell migration in the channel was truly 3D and correlated with metastatic potential. The information-rich data from these assays were used to rank the potency of compounds inhibiting migration through 3D collagen as well as to gain additional insights into the compounds' activities related to cell health. This approach is compatible with a variety of multiparametric, morphological, and/or kinetic readouts.
Assuntos
Ensaios de Migração Celular/métodos , Movimento Celular , Matriz Extracelular/metabolismo , Neoplasias/patologia , Automação , Contagem de Células , Linhagem Celular Tumoral , Ensaios de Migração Celular/instrumentação , Movimento Celular/efeitos dos fármacos , Colágeno/farmacologia , Matriz Extracelular/efeitos dos fármacos , Humanos , Laminina/farmacologia , Invasividade NeoplásicaRESUMO
A new approach for optically sequencing ensembles of single DNA molecules using DNA polymerase to mediate the consecutive incorporation of fluorochrome-labeled nucleotides into an array of large single DNA molecules is presented. The approach utilizes cycles of labeled fluorochrome addition, detection to count incorporations, and bleaching to reset the counter. These additions are imaged and analyzed to estimate the number of labeled additions and to correlate them on a per-locus basis along DNA backbones. Initial studies used precisely labeled polymerase chain reaction products to aid the development and validation of simple models of fluorochrome point spread functions within the imaging system. In complementary studies, nucleotides labeled with the fluorochrome R110 were incorporated into surface-elongated lambda DNA, and fluorescent signals corresponding to the addition of R110-dUTP were counted and assigned precise loci along DNA backbones. The labeled DNAs were then subjected to photobleaching and to a second cycle of addition of R110-labeled nucleotides-a second round of additions was correlated with the first to establish strings of addition histories among the ensemble of largely double-stranded templates. These results confirm the basic operational validity of this approach and point the way to the development of a practical system for optical sequencing.
Assuntos
Microquímica/métodos , Análise de Sequência de DNA/métodos , DNA Polimerase Dirigida por DNA , Nucleotídeos de Desoxiuracil , Desenho de Equipamento , Corantes Fluorescentes , Microquímica/instrumentação , Reação em Cadeia da Polimerase/instrumentação , Reação em Cadeia da Polimerase/métodos , Rodaminas , Análise de Sequência de DNA/instrumentaçãoRESUMO
Modern comparative genomics has been established, in part, by the sequencing and annotation of a broad range of microbial species. To gain further insights, new sequencing efforts are now dealing with the variety of strains or isolates that gives a species definition and range; however, this number vastly outstrips our ability to sequence them. Given the availability of a large number of microbial species, new whole genome approaches must be developed to fully leverage this information at the level of strain diversity that maximize discovery. Here, we describe how optical mapping, a single-molecule system, was used to identify and annotate chromosomal alterations between bacterial strains represented by several species. Since whole-genome optical maps are ordered restriction maps, sequenced strains of Shigella flexneri serotype 2a (2457T and 301), Yersinia pestis (CO 92 and KIM), and Escherichia coli were aligned as maps to identify regions of homology and to further characterize them as possible insertions, deletions, inversions, or translocations. Importantly, an unsequenced Shigella flexneri strain (serotype Y strain AMC[328Y]) was optically mapped and aligned with two sequenced ones to reveal one novel locus implicated in serotype conversion and several other loci containing insertion sequence elements or phage-related gene insertions. Our results suggest that genomic rearrangements and chromosomal breakpoints are readily identified and annotated against a prototypic sequenced strain by using the tools of optical mapping.
Assuntos
Escherichia coli K12/genética , Genoma Bacteriano , Genômica , Mapeamento por Restrição/métodos , Shigella flexneri/genética , Yersinia pestis/genética , Processamento de Imagem Assistida por ComputadorRESUMO
Single molecule approaches offer the promise of large, exquisitely miniature ensembles for the generation of equally large data sets. Although microfluidic devices have previously been designed to manipulate single DNA molecules, many of the functionalities they embody are not applicable to very large DNA molecules, normally extracted from cells. Importantly, such microfluidic devices must work within an integrated system to enable high-throughput biological or biochemical analysis-a key measure of any device aimed at the chemical/biological interface and required if large data sets are to be created for subsequent analysis. The challenge here was to design an integrated microfluidic device to control the deposition or elongation of large DNA molecules (up to millimeters in length), which would serve as a general platform for biological/biochemical analysis to function within an integrated system that included massively parallel data collection and analysis. The approach we took was to use replica molding to construct silastic devices to consistently deposit oriented, elongated DNA molecules onto charged surfaces, creating massive single molecule arrays, which we analyzed for both physical and biochemical insights within an integrated environment that created large data sets. The overall efficacy of this approach was demonstrated by the restriction enzyme mapping and identification of single human genomic DNA molecules.
Assuntos
DNA/química , Técnicas Analíticas Microfluídicas/instrumentação , Análise de Sequência com Séries de Oligonucleotídeos/instrumentação , Humanos , Processamento de Imagem Assistida por Computador , Técnicas Analíticas Microfluídicas/métodos , Peso Molecular , Análise de Sequência com Séries de Oligonucleotídeos/métodosRESUMO
Yersinia pestis is the causative agent of the bubonic, septicemic, and pneumonic plagues (also known as black death) and has been responsible for recurrent devastating pandemics throughout history. To further understand this virulent bacterium and to accelerate an ongoing sequencing project, two whole-genome restriction maps (XhoI and PvuII) of Y. pestis strain KIM were constructed using shotgun optical mapping. This approach constructs ordered restriction maps from randomly sheared individual DNA molecules directly extracted from cells. The two maps served different purposes; the XhoI map facilitated sequence assembly by providing a scaffold for high-resolution alignment, while the PvuII map verified genome sequence assembly. Our results show that such maps facilitated the closure of sequence gaps and, most importantly, provided a purely independent means for sequence validation. Given the recent advancements to the optical mapping system, increased resolution and throughput are enabling such maps to guide sequence assembly at a very early stage of a microbial sequencing project.