Crystal size, shape, and conformational changes drive both the disappearance and reappearance of ritonavir polymorphs in the mill.

Organic compounds can crystallize in different forms known as polymorphs. Discovery and control of polymorphism is crucial to the pharmaceutical industry since different polymorphs can have significantly different physical properties which impacts their utilization in drug delivery. Certain polymorphs have been reported to 'disappear' from the physical world, irreversibly converting to new ones. These unwanted polymorph conversions, initially prevented by slow nucleation kinetics, are eventually observed driven by significant gains in thermodynamic stabilities. The most infamous of these cases is that of the HIV drug ritonavir (RVR): Once its reluctant form was unwillingly nucleated for the first time, its desired form could no longer be produced with the same manufacturing process. Here we show that RVR's extraordinary disappearing polymorph as well as its reluctant form can be consistently produced by ball-milling under different environmental conditions. We demonstrate that the significant difference in stability between its polymorphs can be changed and reversed in the mill-a process we show is driven by crystal size as well as crystal shape and conformational effects. We also show that those effects can be controlled through careful design of milling conditions since they dictate the kinetics of crystal breakage, dissolution, and growth processes that eventually lead to steady-state crystal sizes and shapes in the mill. This work highlights the huge potential of mechanochemistry in polymorph discovery of forms initially difficult to nucleate, recovery of disappearing polymorphs, and polymorph control of complex flexible drug compounds such as RVR.

Accurate extrinsic and intrinsic peak broadening modelling for time-resolved in situ ball milling reactions via synchrotron powder X-ray diffraction.

The debate on the mechanisms which underpin mechanochemical reactions via ball mill grinding is still open. Our ability to accurately measure the microstructural (crystal size and microstrain) evolution of materials under milling conditions as well as their phase composition as a function of time is key to the in-depth understanding of the kinetics and driving forces of mechanochemical transformations. Furthermore, all ball milling reactions end with a steady state or milling equilibrium - represented by a specific phase composition and relative microstructure - that does not change as long as the milling conditions are maintained. The use of a standard sample is essential to determine the instrumental contribution to the X-ray powder diffraction (XRPD) peak broadening for time-resolved in situ (TRIS) monitoring of mechanochemical reactions under in operando conditions. Using TRIS-XRPD on a ball milling setup, coupled with low-energy synchrotron radiation, we investigated different data acquisition and analysis strategies on a silicon standard powder. The diffraction geometry and the microstructural evolution of the standard itself have been studied to model the instrumental contribution to XRPD peak broadening throughout the grinding activity. Previously proposed functions are here challenged and further developed. Importantly, we show that minor drifts of the jar position do not affect the instrumental resolution function significantly. We here report and discuss the results of such investigations and their application to TRIS-XRPD datasets of inorganic and organic ball mill grinding reactions.

Thermal Expansion of Metal-Organic Framework Crystal-Glass Composites.

Metal-organic framework crystal-glass composites (MOF CGCs) are a class of materials comprising a crystalline framework embedded within a MOF glass matrix. Herein, we investigate the thermal expansion behavior of three MOF CGCs, incorporating two flexible (MIL-53(Al) and MIL-118) and one rigid (UL-MOF-1) MOF within a ZIF-62 glass matrix. Specifically, variable-temperature powder X-ray diffraction data and thermomechanical analysis show the suppression of thermal expansivity in each of these three crystalline MOFs when suspended within a ZIF-62 glass matrix. In particular, for the two flexible frameworks, the average volumetric thermal expansion (ß) was found to be near-zero in the crystal-glass composite. These results provide a route to engineering thermal expansivity in stimuli-responsive MOF glass composites.

Pressure promoted low-temperature melting of metal-organic frameworks.

Metal-organic frameworks (MOFs) are microporous materials with huge potential for chemical processes. Structural collapse at high pressure, and transitions to liquid states at high temperature, have recently been observed in the zeolitic imidazolate framework (ZIF) family of MOFs. Here, we show that simultaneous high-pressure and high-temperature conditions result in complex behaviour in ZIF-62 and ZIF-4, with distinct high- and low-density amorphous phases occurring over different regions of the pressure-temperature phase diagram. In situ powder X-ray diffraction, Raman spectroscopy and optical microscopy reveal that the stability of the liquid MOF state expands substantially towards lower temperatures at intermediate, industrially achievable pressures and first-principles molecular dynamics show that softening of the framework coordination with pressure makes melting thermodynamically easier. Furthermore, the MOF glass formed by melt quenching the high-temperature liquid possesses permanent, accessible porosity. Our results thus imply a route to the synthesis of functional MOF glasses at low temperatures, avoiding decomposition on heating at ambient pressure.

Mechanism of powellite crystallite expansion within nano-phase separated amorphous matrices under Au-irradiation.

A fundamental approach was taken to understand the implications of increased nuclear waste loading in the search for new materials for long-term radioisotope encapsulation. This study focused on the formation and radiation tolerance of glass ceramics with selectively induced CaMoO4 as a form to trap the problematic fission product molybdenum. Several samples were synthesised with up to 10 mol% MoO3 within a soda lime borosilicate matrix, exhibiting phase separation on the nano scale according to thermal analysis, which detected two glass transition temperatures. It is predicted that these two phases are a result of spinodal decomposition with Si-O-Ca-O-Si and Si-O-Ca-O-B units, with the latter phase acting as a carrier for MoO3. The solubility limit of molybdenum within this matrix was 1 mol%, after which crystallisation of CaMoO4 occurred, with crystallite size (CS) increasing and cell parameters decreasing as a function of [MoO3]. These materials were then subjected to irradiation with 7 MeV Au3+ ions to replicate the nuclear interactions resulting from α-decay. A dose of 3 × 1014 ions per cm2 was achieved, resulting in 1 dpa of damage within a depth of ∼1.5 µm, according to TRIM calculations. Glasses and glass ceramics were then analysed using BSE imaging, XRD refinement, and Raman spectroscopy to monitor changes induced by accumulated damage. Irradiation was not observed to cause any significant changes to the residual amorphous network, nor did it cause amorphisation of CaMoO4 based on the relative changes to particle size and density. Furthermore, the substitution of Ca2+ to form water-soluble Na2/NaGd-MoO4 assemblages did not occur, indicating that CaMoO4 is resilient to chemical modification following ion interactions. Au-irradiation did however cause CaMoO4 lattice parameter expansion, concurrent to growth in CS. This is predicted to be a dual parameter mechanism of alteration based on thermal expansion from electronic coupling, and the accumulation of defects arising from atomic displacements.

Rich Polymorphism of a Metal-Organic Framework in Pressure-Temperature Space.

We present an in situ powder X-ray diffraction study on the phase stability and polymorphism of the metal-organic framework ZIF-4, Zn(imidazolate)2, at simultaneous high pressure and high temperature, up to 8 GPa and 600 °C. The resulting pressure-temperature phase diagram reveals four, previously unknown, high-pressure-high-temperature ZIF phases. The crystal structures of two new phases-ZIF-4-cp-II and ZIF-hPT-II-were solved by powder diffraction methods. The total energy of ZIF-4-cp-II was evaluated using density functional theory calculations and was found to lie in between that of ZIF-4 and the most thermodynamically stable polymorph, ZIF- zni. ZIF-hPT-II was found to possess a doubly interpenetrated diamondoid topology and is isostructural with previously reported Cd(Imidazolate)2 and Hg(Imidazolate)2 phases. This phase exhibited extreme resistance to both temperature and pressure. The other two new phases could be assigned with a unit cell and space group, although their structures remain unknown. The pressure-temperature phase diagram of ZIF-4 is strikingly complicated when compared with that of the previously investigated, closely related ZIF-62 and demonstrates the ability to traverse complex energy landscapes of metal-organic systems using the combined application of pressure and temperature.

X-ray radiation-induced amorphization of metal-organic frameworks.

We report the amorphization of three metal-organic frameworks, ZIF-4, ZIF-62, and ZIF-zni, by synchrotron X-ray radiation. Complete amorphization of these structures occurs on timescales ranging from minutes to hours. This process is non-isokinetic in all three cases, given a varying transformation rate as the transformation proceeds. The underlying mechanism bears the signature of inhomogeneous nucleation, reflected by an increasing local Avrami exponent over time. Furthermore, the amorphization rate accelerates with increasing temperature, even far below the usual thermal stability limit of each crystalline phase. These results not only have important implications for interpretation of X-ray synchrotron studies on the stability of metal-organic frameworks, they also shed light on the rarely-discussed and generally unpredictable experimental problem of beam damage in organic and inorganic compounds in general.

Understanding the unexpected effect of frequency on the kinetics of a covalent reaction under ball-milling conditions.

We here explore how ball-mill-grinding frequency affects the kinetics of a disulfide exchange reaction. Our kinetic data show that the reaction progress is similar at all the frequencies studied (15-30 Hz), including a significant induction time before the nucleation and growth process starts. This indicates that to start the reaction an initial energy accumulation is necessary. Other than mixing, the energy supplied by the mechanical treatment has two effects: (i) reducing the crystal size and (ii) creating defects in the structure. The crystal-breaking process is likely to be dominant at first becoming less important later in the process when the energy supplied is stored at the molecular level as local crystal defects. This accumulation is taken here to be the rate-determining step. We suggest that the local defects accumulate preferentially at or near the crystal surface. Since the total area increases exponentially when the crystal size is reduced by the crystal-breaking process, this can further explain the exponential dependence of the onset time on the milling frequency.

Understanding the Influence of Surface Solvation and Structure on Polymorph Stability: A Combined Mechanochemical and Theoretical Approach.

We explore the effect of solvent concentration on the thermodynamic stability of two polymorphs of a 1:1 cocrystal of theophylline and benzamide subjected to ball-mill liquid assisted grinding (LAG) and we investigate how this can be related to surface solvent solvation phenomena. In this system, most stable bulk polymorph form II converts to metastable bulk polymorph form I upon neat grinding (NG), while form I can fully or partially transform into form II under LAG conditions, depending on the amount of solvent used. Careful and strict experimental procedures were designed to achieve polymorph equilibrium under ball-mill LAG conditions for 16 different solvents. This allowed us to determine 16 equilibrium polymorph concentration curves as a function of solvent concentration. Ex-situ powder X-ray diffraction (PXRD) was used to monitor the polymorph concentration and crystallite size. The surface site interactions point (SSIP) description of noncovalent interactions was used in conjunction with the SSIMPLE method for calculating solvation energies to determine which functional groups are more or less exposed on the polymorph crystal surfaces. Our results demonstrate that (i) ball-mill LAG equilibrium curves can be successfully achieved experimentally for a cocrystal system; (ii) the equilibrium curves vary from solvent to solvent in onset values and slopes, thus confirming the generality of the interconversion phenomenon that we interpret here in terms of cooperativity; (iii) the concentration required for a switch in polymorphic outcome is dependent on the nature of the solvent; (iv) the SSIP results indicate that the theophylline π-system face is more exposed on the surface of form I while the theophylline N-methyl groups are more exposed in form II; and (v) for some solvents, form II has a significantly smaller crystal size at equilibrium than form I in the investigated solvent concentration range. Therefore, the free energy of the 1:1 cocrystal of theophylline and benzamide polymorphs studied here must be affected by surface solvation under ball-mill LAG conditions.

Dynamic Covalent Chemistry under High-Pressure:A New Route to Disulfide Metathesis.

This work describes, for the first time, the application of combined pressure and temperature stimuli in disulfide metathesis reactions. In the system studied, above a pressure of 0.2 GPa, equimolar amounts of symmetric disulfides bis 4-chlorophenyl disulfide [(4-ClPhS)2 ] and bis 2-nitrophenyl disulfide [(2-NO2 PhS)2 ] react to give the heterodimeric product 4-Cl-PhSSPh-2-NO2 . In contrast to experiments conducted in solution at atmospheric pressure or in mechanochemical experiments under ball-mill grinding conditions, there is no necessity to use a base or thiolate anion as a catalyst for the exchange reaction under investigated conditions. Single-crystal and powder X-ray diffraction revealed also that, despite the high-pressure conditions of this reaction, the heterodimeric-disulfide product unexpectedly crystallizes into the low-density polymorph A. This counterintuitive result contrasts with the high-pressure stability of the higher-density polymorph B, confirmed by its compression up to 2.8 GPa with no signs of a phase transition.

Selective Calixarene-Directed Synthesis of MXene Plates, Crumpled Sheets, Spheres, and Scrolls.

Fully exploiting the electronic and mechanical properties of 2D laminar materials not only requires efficient and effective means of their exfoliation into low dimensional layers, but also necessitates a means of changing their morphology so as to explore any enhancement that this may offer. MXenes are a rapidly emerging new class of such laminar materials with unique properties. However, access to other morphologies of MXenes has not yet been fully realised. To this end we have developed the synthesis of MXenes (Ti2 C) as plates, crumpled sheets, spheres and scrolls, which involves selective intercalation of p-phosphonic calix[n]arenes, with control in morphology arising from the choice of the size of the macrocycle, n=4, 5, 6, or 8. This opens up wider avenues of discovery/design for new morphologies from the wider family of MXenes beyond Ti2 C, along with opportunities to exploit any new physico-chemical properties proffered.

ß-Irradiation Effects on the Formation and Stability of CaMoO4 in a Soda Lime Borosilicate Glass Ceramic for Nuclear Waste Storage.

Molybdenum solubility is a limiting factor to actinide loading in nuclear waste glasses, as it initiates the formation of water-soluble crystalline phases such as alkali molybdates. To increase waste loading efficiency, alternative glass ceramic structures are sought that prove resistant to internal radiation resulting from radioisotope decay. In this study, selective formation of water-durable CaMoO4 in a soda lime borosilicate is achieved by introducing up to 10 mol % MoO3 in a 1:1 ratio to CaO using a sintering process. The resulting homogeneously dispersed spherical CaMoO4 nanocrystallites were analyzed using electron microscopy, X-ray diffraction (XRD), Raman and electron paramagnetic resonance (EPR) spectroscopies prior to and post irradiation, which replicated internal ß-irradiation damage on an accelerated scale. Following 0.77 to 1.34 GGy of 2.5 MeV electron radiation CaMoO4 does not exhibit amorphization or significant transformation. Nor does irradiation induce glass-in-glass phase separation in the surrounding amorphous matrix, or the precipitation of other molybdates, thus proving that excess molybdenum can be successfully incorporated into a structure that it is resistant to ß-irradiation proportional to 1000 years of storage without water-soluble byproducts. The CaMoO4 crystallites do however exhibit a nonlinear Scherrer crystallite size pattern with dose, as determined by a Rietveld refinement of XRD patterns and an alteration in crystal quality as deduced by anisotropic peak changes in both XRD and Raman spectroscopy. Radiation-induced modifications in the CaMoO4 tetragonal unit cell occurred primarily along the c-axis indicating relaxation of stacked calcium polyhedra. Concurrently, a strong reduction of Mo6+ to Mo5+ during irradiation is observed by EPR, which is believed to enhance Ca mobility. These combined results are used to hypothesize a crystallite size alteration model based on a combination of relaxation and diffusion-based processes initiated by added energy from ß-impingement and second-order structural modifications induced by defect accumulation.

Melt-Quenched Glasses of Metal-Organic Frameworks.

Crystalline solids dominate the field of metal-organic frameworks (MOFs), with access to the liquid and glass states of matter usually prohibited by relatively low temperatures of thermal decomposition. In this work, we give due consideration to framework chemistry and topology to expand the phenomenon of the melting of 3D MOFs, linking crystal chemistry to framework melting temperature and kinetic fragility of the glass-forming liquids. Here we show that melting temperatures can be lowered by altering the chemistry of the crystalline MOF state, which provides a route to facilitate the melting of other MOFs. The glasses formed upon vitrification are chemically and structurally distinct from the three other existing categories of melt-quenched glasses (inorganic nonmetallic, organic, and metallic), and retain the basic metal-ligand connectivity of crystalline MOFs, which connects their mechanical properties to their starting chemical composition. The transfer of functionality from crystal to glass points toward new routes to tunable, functional hybrid glasses.

Unconventional Superconductivity in the Layered Iron Germanide YFe(2)Ge(2).

The iron-based intermetallic YFe_{2}Ge_{2} stands out among transition metal compounds for its high Sommerfeld coefficient of the order of 100 mJ/(mol K^{2}), which signals strong electronic correlations. A new generation of high quality samples of YFe_{2}Ge_{2} show superconducting transition anomalies below 1.8 K in thermodynamic, magnetic, and transport measurements, establishing that superconductivity is intrinsic in this layered iron compound outside the known superconducting iron pnictide or chalcogenide families. The Fermi surface geometry of YFe_{2}Ge_{2} resembles that of KFe_{2}As_{2} in the high pressure collapsed tetragonal phase, in which superconductivity at temperatures as high as 10 K has recently been reported, suggesting an underlying connection between the two systems.

Direct observation of intermediates in a thermodynamically controlled solid-state dynamic covalent reaction.

We present the first polymorph interconversion study that uses solid-state dynamic covalent chemistry (DCC). This system exhibits unexpected and rich behavior, including the observation that under appropriate conditions the polymorph interconversion of a heterodimer proceeds through reversible covalent chemistry intermediates, and this route is facilitated by one of the two disulfide homodimers involved in the reaction. Furthermore, we demonstrate experimentally that in all cases a dynamic equilibrium is reached, meaning that changing the milling conditions affects the free energy difference between the two polymorphs and thus their relative stability. We suggest that this effect is due to the surface solvation energy combined with the high surface to volume ratio of the nanocrystalline powder.

Loading and thermal behaviour of ZIF-8 metal-organic framework-inorganic glass composites.

Here we describe the synthesis of a compositional series of metal-organic framework crystalline-inorganic glass composites (MOF-CIGCs) containing ZIF-8 and an inorganic phosphate glass, 20Na2O-10NaCl-70P2O5, to expand the library of host matrices for metal-organic frameworks. By careful selection of the inorganic glass component, a relatively high loading of ZIF-8 (70 wt%) was achieved, which is the active component of the composite. A Zn⋯O-P interfacial bond, previously identified in similar composites/hybrid blends, was suggested by analysis of the total scattering pair distribution function data. Additionally, CO2 and N2 sorption and variable-temperature PXRD experiments were performed to assess the composites' properties.

Mechanochemically-induced glass formation from two-dimensional hybrid organic-inorganic perovskites.

Hybrid organic-inorganic perovskites (HOIPs) occupy a prominent position in the field of materials chemistry due to their attractive optoelectronic properties. While extensive work has been done on the crystalline materials over the past decades, the newly reported glasses formed from HOIPs open up a new avenue for perovskite research with their unique structures and functionalities. Melt-quenching is the predominant route to glass formation; however, the absence of a stable liquid state prior to thermal decomposition precludes this method for most HOIPs. In this work, we describe the first mechanochemically-induced crystal-glass transformation of HOIPs as a rapid, green and efficient approach for producing glasses. The amorphous phase was formed from the crystalline phase within 10 minutes of ball-milling, and exhibited glass transition behaviour as evidenced by thermal analysis techniques. Time-resolved in situ ball-milling with synchrotron powder diffraction was employed to study the microstructural evolution of amorphisation, which showed that the crystallite size reaches a comminution limit before the amorphisation process is complete, indicating that energy may be further accumulated as crystal defects. Total scattering experiments revealed the limited short-range order of amorphous HOIPs, and their optical properties were studied by ultraviolet-visible (UV-vis) spectroscopy and photoluminescence (PL) spectroscopy.