In vivo safety assessment of a bio-inspired bone adhesive.

A new class of materials, bone adhesives, could revolutionise the treatment of highly fragmented fractures. We present the first biological safety investigation of a bio-inspired bone adhesive. The formulation was based upon a modified calcium phosphate cement that included the amino acid phosphoserine. This material has recently been described as substantially stronger than other bioresorbable calcium phosphate cements. Four adhesive groups with the active substance (phosphoserine) and two control groups without phosphoserine were selected for in vitro and in vivo biocompatibility testing. The test groups were subject for cell viability assay and subcutaneous implantation in rats that was followed by gene expression analysis and histology assessment after 6 and 12 weeks. All adhesive groups supported the same rate of cell proliferation compared to the α-TCP control and had viability between 45-64% when compared to cell control. There was no evidence of an increased immune response or ectopic bone formation in vivo. To conclude, this bio-inspired bone adhesive has been proven to be safe, in the present study, without any harmful effects on the surrounding soft tissue.

Developmental low-dose exposure to bisphenol A induces chronic inflammation, bone marrow fibrosis and reduces bone stiffness in female rat offspring only.

BACKGROUND: Developmental exposure to low doses of the endocrine disruptor bisphenol A (BPA) is known to alter bone tissue in young rodents, although how bone tissue is affected in aged animals is not well known. We have recently shown that low-dose developmental exposure to BPA increases procollagen type I N-terminal propeptide (P1NP) levels, a peptide formed during type 1 collagen synthesis, in plasma of 5-week-old female rat offspring while male offspring showed reduced bone size. OBJECTIVE: To analyze offspring bone phenotype at 52 weeks of age and clarify whether the BPA-induced increase in P1NP levels at 5 weeks is an early sign of bone marrow fibrosis development. METHODS: As in our 5-week study, pregnant Fischer 344 rats were exposed to BPA via drinking water corresponding to 0.5 µg/kg BW/day (BPA0.5), which is in the range of human daily exposure, or 50 µg/kg BW/day (BPA50) from gestational day 3.5 until postnatal day 22. Controls were given only vehicle. The offspring were sacrificed at 52 weeks of age. Bone effects were analyzed using peripheral quantitative and micro-computed tomography (microCT), 3-point bending test, plasma markers and histological examination. RESULTS: Compared to a smaller bone size at 5 weeks, at the age of 52 weeks, femur size in male offspring had been normalized in developmentally BPA-exposed rats. The 52-week-old female offspring showed, like the 5-week-old siblings, higher plasma P1NP levels compared to controls but no general increasing bone growth or strength. However, 2 out of 14 BPA-exposed female offspring bones developed extremely thick cortices later in life, discovered by systematic in vivo microCT scanning during the study. This was not observed in male offspring or in female controls. Biomechanical testing revealed that both doses of developmental BPA exposure reduced femur stiffness only in female offspring. In addition, histological analysis showed an increased number of fibrotic lesions only in the bone marrow of female rat offspring developmentally exposed to BPA. In line with this, plasma markers of inflammation, Tnf (in BPA0.5) and Timp1 (in BPA50) were increased exclusively in female offspring. CONCLUSIONS: Developmental BPA exposure at an environmentally relevant concentration resulted in female-specific effects on bone as well as on plasma biomarkers of collagen synthesis and inflammation. Even a dose approximately eight times lower than the current temporary EFSA human tolerable daily intake of 4 µg/kg BW/day, appeared to induce bone stiffness reduction, bone marrow fibrosis and chronic inflammation in female rat offspring later in life.

Three-Dimensional Analysis of the Fundus of the Human Internal Acoustic Canal.

OBJECTIVES: Documentation of the nerve components in the internal acoustic canal is essential before cochlea implantation surgery. Interpretations may be challenged by wide anatomical variations of the VIIIth nerve and their ramifications. Malformations may further defy proper nerve identification. DESIGN: Using microcomputed tomography, we analyzed the fundus bone channels in an archival collection of 113 macerated human temporal bones and 325 plastic inner molds. Data were subsequently processed by volume-rendering software using a bony tissue algorithm. Three-dimensional reconstructions were made, and through orthogonal sections, the topographic anatomy was established. RESULTS: The technique provided additional information regarding the anatomy of the nerve foramina/channels of the human fundus region, including variations and destinations. Channel anastomosis were found beyond the level of the fundus. A foramen of the transverse crest was identified. CONCLUSIONS: Three-dimensional reconstructions and cropping outlined the bone canals and demonstrated the highly variable VIIIth nerve anatomy at the fundus of the human inner acoustic canal. Myriad channel interconnections suggested an intricate system of neural interactive pathways in humans. Particularly striking was the variable anatomy of the saccule nerve channels. The results may assist in the preoperative interpretation of the VIIIth nerve anatomy.

Anatomical Characteristics of Facial Nerve and Cochlea Interaction.

OBJECTIVE: The aim was to study the relationship between the labyrinthine portion (LP) of the facial canal and the cochlea in human inner ear molds and temporal bones using micro-CT and 3D rendering. A reduced cochlea-facial distance may spread electric currents from the cochlear implant to the LP and cause facial nerve stimulation. Influencing factors may be the topographic anatomy and otic capsule properties. METHODS: An archival collection of human temporal bones underwent micro-CT and 3D reconstruction. In addition, cochlea-facial distance was assessed in silicone and polyester resin molds, and the association between the LP and upper basal turn of the cochlea was analyzed. RESULTS: Local thinning of the otic capsule and local anatomy may explain the development of cochlea-facial dehiscence, which was found in 1.4%. A reduced cochlea-facial distance was noted in 1 bone with a superior semicircular canal dehiscence but not in bones with superior semicircular canal "blue line." The otic capsule often impinged upon the LP and caused narrowing. CONCLUSION: Micro-CT with 3D rendering offers new possibilities to study the topographic anatomy of the human temporal bone. The varied shape of the cross-section of the LP could often be explained by an "intruding" cochlea.

Low-dose developmental exposure to bisphenol A induces sex-specific effects in bone of Fischer 344 rat offspring.

BACKGROUND: Bisphenol A (BPA) is a component of polycarbonate plastics to which humans are regularly exposed at low levels, and an endocrine disruptor with effects on several hormonal systems. Bone is a sensitive hormone target tissue, and we have recently shown that in utero and lactational exposure to 25µg BPA/kg BW/day alters femoral geometry in rat offspring. OBJECTIVE: To investigate bone effects in rat offspring after developmental exposure to a BPA dose in the range of human daily exposure (0.1-1.5µg/kg BW/day) as well as a dose to corroborate previous findings. METHODS: Pregnant Fischer 344 rats were exposed to BPA via drinking water corresponding to 0.5µg/kg BW/day: [0.5], (n=21) or 50µg/kg BW/day: [50], (n = 16) from gestational day 3.5 until postnatal day 22, while controls were given only vehicle (n = 25). The offspring was sacrificed at 5 weeks of age. Bone effects were analyzed using peripheral quantitative computed tomography (pQCT), the 3-point bending test, plasma markers of bone turnover, and gene expression in cortical bone and bone marrow. RESULTS: Compared to controls, male offspring developmentally exposed to BPA had shorter femurs. pQCT analysis revealed effects in the [0.5] group, but not in the [50] group; BPA reduced both trabecular area (-3.9%, p < 0.01) and total cross sectional area (-4.1%, p < 0.01) of femurs in the [0.5] group, whereas no effects were seen on bone density. Conversely, bone length and size were not affected in female offspring. However, the procollagen type I N-terminal propeptide (P1NP), a peptide formed during type 1 collagen synthesis, was increased in plasma (42%: p < 0.01) in female offspring exposed to [0.5] of BPA, although collagen gene expression was not increased in bone. The biomechanical properties of the bones were not altered in either sex. Bone marrow mRNA expression was only affected in male offspring. CONCLUSIONS: Developmental low-dose exposure to BPA resulted in sex-specific bone effects in rat offspring. A dose approximately eight times lower than the current temporary EFSA human tolerable daily intake of 4µg/kg BW/day, reduced bone length and size in male rat offspring. Long-term studies are needed to clarify whether the increased plasma levels of P1NP in female offspring reflect development of fibrosis.

Comparison of 2D radiography and a semi-automatic CT-based 3D method for measuring change in dorsal angulation over time in distal radius fractures.

OBJECTIVE: The aim of the present study was to compare the reliability and agreement between a computer tomography-based method (CT) and digitalised 2D radiographs (XR) when measuring change in dorsal angulation over time in distal radius fractures. MATERIALS AND METHODS: Radiographs from 33 distal radius fractures treated with external fixation were retrospectively analysed. All fractures had been examined using both XR and CT at six times over 6 months postoperatively. The changes in dorsal angulation between the first reference images and the following examinations in every patient were calculated from 133 follow-up measurements by two assessors and repeated at two different time points. The measurements were analysed using Bland-Altman plots, comparing intra- and inter-observer agreement within and between XR and CT. RESULTS: The mean differences in intra- and inter-observer measurements for XR, CT, and between XR and CT were close to zero, implying equal validity. The average intra- and inter-observer limits of agreement for XR, CT, and between XR and CT were ± 4.4°, ± 1.9° and ± 6.8° respectively. CONCLUSIONS: For scientific purpose, the reliability of XR seems unacceptably low when measuring changes in dorsal angulation in distal radius fractures, whereas the reliability for the semi-automatic CT-based method was higher and is therefore preferable when a more precise method is requested.

Pre-incubation of chemically crosslinked hyaluronan-based hydrogels, loaded with BMP-2 and hydroxyapatite, and its effect on ectopic bone formation.

The effects of pre-incubation of hyaluronan hydrogels, for different lengths of time after the initiation of chemical crosslinking and prior to injection, were explored both by investigating the in vitro BMP-2 release kinetics from the hydrogel and by studying the ectopic bone formation in rats. From the curing profile, obtained from rheological analysis, appropriate pre-incubation times (1 min, 5 h and 3 days) were selected, to prepare slightly, moderately and fully cured hydrogels. Comparable release profiles were observed for all three test groups in vitro. Furthermore, radiography, pQCT and histology of the explanted grafts showed cancellous bone formation in all groups after 5 weeks in vivo. However, longer pre-incubation times gave rise to an increase in bone volume, but a decrease in bone density. Moreover, the 5 h and the 3 days grafts appeared to be more ordered and resistant to deformation from the surrounding tissue than the 1 min grafts. The observed variations in mechanical and biological properties could potentially be used to adapt the treatment for a specific indication.

Anti-osteoporosis therapy and fracture healing.

BACKGROUND: A number of medications are approved for treatment of osteoporosis. As mode of action usually is anti-catabolic/anti-resorptive or anabolic, it is of interest to know whether these drugs affect not only normal bone remodeling, but also fracture healing. OBJECTIVE: The purpose of this paper is to give a short overview of the potential effect of various anti-osteoporotic medication on fracture healing. METHODS: A narrative literature review was performed to describe the current knowledge. RESULTS: Anti-catabolic/anti-resorptive drugs: for bisphosphonates, the most common class of drugs in this group, experimental studies have shown a larger and stronger callus and delayed remodeling but no evidence of delayed healing. A human monoclonal antibody to RANKL is another anti-catabolic drug, with the only report to date showing enhanced healing in an animal model. Strontium ranelate is a drug where both anti-catabolic and a weak anabolic effect have been proposed, with experimental data ranging from no effect to significant increase in both callus volume and strength. Anabolic drugs: PTH has demonstrated accelerated healing of various experimental fractures and of distal radius and pelvic fractures in humans. While the exact mechanism is not fully understood, PTH results in increased recruitment and differentiation of chondrocytes and enhancement of endochondral ossification. A monoclonal antibody to block sclerostin is another potential anabolic pathway, where animal data have shown increase in bone mass and strength. The potential effect on fracture healing is yet to be studied. CONCLUSION: There are still large gaps in the understanding of the potential effect of anti-osteoporotic drugs on fracture healing, although based on present knowledge a recent or present fracture should not be considered as a contraindication to such treatment.

Bisphosphonate-linked hyaluronic acid hydrogel sequesters and enzymatically releases active bone morphogenetic protein-2 for induction of osteogenic differentiation.

Regeneration of bone by delivery of bone morphogenetic proteins (BMPs) from implantable scaffolds is a promising alternative to the existing autologous bone grafting procedures. Hydrogels are used extensively in biomaterials as delivery systems for different growth factors. However, a controlled release of the growth factors is necessary to induce bone formation, which can be accomplished by various chemical functionalities. Herein we demonstrate that functionalization of a hyaluronan (HA) hydrogel with covalently linked bisphosphonate (BP) ligands provides efficient sequestering of BMP-2 in the resulting HA-BP hydrogel. The HA-BP hydrogel was investigated in comparison with its analogue lacking BP groups (HA hydrogel). While HA hydrogel released 100% of BMP-2 over two weeks, less than 10% of BMP-2 was released from the HA-BP hydrogel for the same time. We demonstrate that the sequestered growth factor can still be released by enzymatic degradation of the HA-BP hydrogel. Most importantly, entrapment of BMP-2 in HA-BP hydrogel preserves the growth factor bioactivity, which was confirmed by induction of osteogenic differentiation of mesenchymal stem cells (MSCs) after the cells incubation with the enzymatic digest of the hydrogel. At the same time, the hydrogels degradation products were not toxic to MSCs and osteoblasts. Furthermore, BP-functionalization of HA hydrogels promotes adhesion of the cells to the surface of HA hydrogel. Altogether, the present findings indicate that covalent grafting of HA hydrogel with BP groups can alter the clinical effects of BMPs in bone tissue regeneration.

Morphological differences in BMP-2-induced ectopic bone between solid and crushed hyaluronan hydrogel templates.

The possibility to affect bone formation by using crushed versus solid hydrogels as carriers for bone morphogenetic protein 2 (BMP-2) was studied. Hydrogels, based on chemical crosslinking between hyaluronic acid and poly(vinyl alcohol) derivatives, were loaded with BMP-2 and hydroxyapatite. Crushed and solid forms of the gels were analyzed both in vitro via a release study using ¹²5I radioactive labeling of BMP-2, and in vivo in a subcutaneous ectopic bone model in rats. Dramatically different morphologies were observed for the ectopic bone formed in vivo in the two types of gels, even though virtually identical release profiles were observed in vitro. Solid hydrogels induced formation of a dense bone shell around non-degraded hydrogel, while crushed hydrogels demonstrated a uniform bone formation throughout the entire sample. These results suggest that by crushing the hydrogel, the construct's three-dimensional network becomes disrupted. This could expose unreacted functional groups, making the fragment's surfaces reactive and enable limited chemical fusion between the crushed hydrogel fragments, leading to similar in vitro release profiles. However, in vivo these interactions could be broken by enzymatic activity, creating a macroporous structure that allows easier cell infiltration, thus, facilitating bone formation.

The effects of different weight-bearing regimes on press-fit cup stability: a randomised study with five years of follow-up using radiostereometry.

PURPOSE: There is little evidence to support immediate weight bearing after uncemented total hip arthroplasty (THA). METHODS: Thirty-seven patients with unilateral osteoarthritis of the hip received a press-fit cup. Cup stability was assessed with radiostereometry (RSA) over five years. Patients were randomised to immediate full weight bearing, or partial weight bearing for three months. RESULTS: At five years, we found no difference in micro-motion as assessed with radiostereometry. Numerically, there was more proximal translation and increased inclination with immediate weight bearing, but these values barely exceeded the precision limit for the method. Pooled data for the two groups revealed translations of 0.1-0.3 mm and rotations of 0.2-0.3° over the five year follow-up period. CONCLUSIONS: We found no adverse effects of immediate weight bearing after THA in relation to stability of these press-fit cups. Early mobilisation might have other advantages.

Guiding bone formation using semi-onlay calcium phosphate implants in an ovine calvarial model.

The restoration of cranio-maxillofacial deformities often requires complex reconstructive surgery in a challenging anatomical region, with abnormal soft tissue structures and bony deficits. In this proof-of-concept, the possibility of vertical bone augmentation was explored by suspending hemispherically shaped titanium-reinforced porous calcium phosphate (CaP) implants (n = 12) over the frontal bone in a sheep model (n = 6). The animals were euthanized after week 13 and the specimens were subject to micro-computed tomography (µCT) and comprehensive histological analysis. Histology showed that the space between implant and the recipient bone was filled with a higher percentage of newly formed bone (NFB) versus soft tissue with a median of 53% and 47%, respectively. Similar results were obtained from the µ-CT analysis, with a median of 56% NFB and 44% soft tissue filling the void. Noteworthy, significantly higher bone-implant contact was found for the CaP (78%, range 14%-94%) versus the Titanium (29%, range 0%-75%) portion of the implant exposed to the surrounding bone. The histological analysis indicates that the CaP replacement by bone is driven by macrophages over time, emphasized by material-filled macrophages found in close vicinity to the CaP with only a small number of single osteoclasts found actively remodeling the NFB. This study shows that CaP based implants can be assembled with the help of additive manufacturing to guide vertical bone formation without decortification or administration of growth factors. Furthermore, it highlights the potential disadvantage of a seamless fit between the implant and the recipient's bone.

Gluing Living Bone Using a Biomimetic Bioadhesive: From Initial Cut to Final Healing.

Osteoporotic fractures are a growing issue due to the increasing incidence of osteoporosis worldwide. High reoperation rates in osteoporotic fractures call for investigation into new methods in improving fixation of osteoporotic bones. In the present study, the strength of a recently developed bone bioadhesive, OsStictm, was evaluated in vivo using a novel bone core assay in a murine animal model at 0, 3, 7, 14, 28, and 42 days. Histology and micro-CT were obtained at all time points, and the mean peak pull-out force was assessed on days 0-28. The adhesive provided immediate fixation to the bone core. The mean peak bone core pull-out force gradually decreased from 6.09 N (σ 1.77 N) at day 0 to a minimum of 3.09 N (σ 1.08 N) at day 7, recovering to 6.37 N (σ 4.18 N) by day 28. The corresponding fibrin (Tisseel) control mean peak bone core pull-out characteristic was 0.27 N (σ 0.27 N) at day 0, with an abrupt increase from 0.37 N (σ 0.28) at day 3, 6.39 N (σ 5.09 N) at day 7, and continuing to increase to 11.34 N (σ 6.5 N) by day 28. The bone cores failed either through core pull-out or by the cancellous part of the core fracturing. Overall, the adhesive does not interrupt healing with pathological changes or rapid resorption. Initially, the adhesive bonded the bone core to the femur, and over time, the adhesive was replaced by a vascularised bone of equivalent quality and quantity to the original bone. At the 42 day time point, 70% of the adhesive in the cancellous compartment and 50% in the cortical compartment had been replaced. The adhesive outwith the bone shell was metabolized by cells that are only removing the material excess with no ectopic bone formation. It is concluded that the adhesive is not a physical and biochemical barrier as the bone heals through the adhesive and is replaced by a normal bone tissue. This adhesive composition meets many of the clinical unmet needs expressed in the literature, and may, after further preclinical assessments, have potential in the repair of bone and osteochondral fragments.

Periprosthetic bone mineral density and fixation of the uncemented CLS stem related to different weight bearing regimes: A randomized study using DXA and RSA in 38 patients followed for 5 years.

BACKGROUND AND PURPOSE: There is no consensus on the best rehabilitation regime after uncemented total hip arthroplasty. Theoretically, bone ingrowth into the implant should benefit from initial partial weight bearing. We investigated whether the degree of postoperative weight bearing influences the periprosthetic bone mineral density (BMD) and/or the stability of the CLS stem. PATIENTS AND METHODS: 38 patients received an uncemented CLS stem and were randomized to either unrestricted postoperative weight bearing or to partial weight bearing for 3 months. Periprosthetic BMD was measured in the 7 Gruen zones with DXA and the stability of the femoral stem was assessed by radiostereometric analysis (RSA) after surgery and at 3, 12, 24, and 60 months. RESULTS: Periprosthetic BMD was not influenced by the type of postoperative weight bearing. BMD was reduced by 8-15% in all Gruen zones at 3 months. Restoration toward initial BMD was observed in all zones except in zone 7 (calcar region), where BMD was reduced by 22% at 5 years. Immediate weight bearing after surgery had no influence on the stability of the CLS stem, as assessed by RSA. INTERPRETATION: Immediate full weight bearing after uncemented total hip arthroplasty is safe. There is no difference in the periprosthetic BMD or in stability of the stem as measured by RSA compared to partial weight bearing for 3 months. BMD is reduced by more than 20% in the calcar region around a CLS stem after 5 years.

Exposure to pastures fertilised with sewage sludge disrupts bone tissue homeostasis in sheep.

The femurs of male and female sheep (Ovis aries), aged 18 months, bred on pastures fertilized twice annually with sewage sludge (2.25 tonnes dry matter/ha; Treated; T)) or on pastures treated with inorganic fertilizer (Control; C) were studied, using peripheral Quantitative Computed Tomography (pQCT) and the three-point bending test. Males were maintained on the respective treatments from conception to weaning and then maintained on control pastures while the females were maintained on the respective treatments until slaughter. T rams exhibited increased total bone mineral density (BMD) at the metaphyseal part of femur (+10.5%, p<0.01) compared with C rams but had a reduced total cross sectional area (CSA, -11.5%, p<0.001), trabecular CSA (-17.1%, p<0.01) and periosteal circumference (-5.7%, p<0.001). In the mid-diaphyseal part, T rams had an increased total BMD (+13.8%, p<0.0001) and stiffness (+6.4%, p<0.01) but reduced total CSA (-12.1%, p<0.0001) and marrow cavity (-25.8%, p<0.0001), relative to C rams. In ewes although pQCT analysis of neither the metaphyseal nor the mid-diaphyseal part of the female femur bones showed any significant differences with treatment, the biomechanical method revealed a reduction in load at failure (-17.3%, p<0.01) and stiffness (-10.7%, p<0.05) amongst T ewes. It is concluded that exposure to pollutants present in sewage sludge can perturb bone tissue homeostasis in sheep, but particularly in males.

Impact of Hydrogel Cross-Linking Chemistry on the in Vitro and in Vivo Bioactivity of Recombinant Human Bone Morphogenetic Protein-2.

Designing strategies to deliver functional proteins at physiologically relevant concentrations using chemically cross-linked biocompatible hydrogels is a major field of research. However, the impact of cross-linking chemistry on the encapsulated protein bioactivity is rarely studied. Here we examine the two well-known cross-linking reactions namely; hydrazone cross-linking chemistry and thiol-Michael addition reaction to form hyaluronic acid (HA) hydrogels. As a therapeutic protein, we employed recombinant human bone morphogenetic protein-2 (rhBMP-2) for this study. Incubation of rhBMP-2 with HA functionalized with a thiol diminished phosphorylation of Smad 1/5/8, a signal transducer for osteogenic differntiation, whereas an aldehyde functionalized HA had no effect. This indicates that thiol functionalized polymers indeed has an impact on protein function. To validate this result in an in vivo setting we performed BMP-2 induced bone formation in a rat ectopic model. These experiments revealed that the hydrazone-cross-linked HA-hydrogel induced significantly higher bone formation (18.90 ± 4.25 mm3) as compared to the HA-thiol-Michael hydrogels (1.25 ± 0.52 mm3) after 8 weeks as determined by micro-computed tomography. The histological examination of the neo-bone indicated that hydrazone-hydrogels promoted a better quality of bone formation with improved mineralization and collagen formation as compared to the thiol-Michael hydrogels. We believe such a direct comparison of two cross-linking chemistries will provide new insight for developing biomaterials for protein delivery for in vivo applications.

A biomechanical test model for evaluating osseous and osteochondral tissue adhesives.

BACKGROUND: Currently there are no standard models with which to evaluate the biomechanical performance of calcified tissue adhesives, in vivo. We present, herein, a pre-clinical murine distal femoral bone model for evaluating tissue adhesives intended for use in both osseous and osteochondral tissue reconstruction. RESULTS: Cylindrical cores (diameter (Ø) 2 mm (mm) × 2 mm depth), containing both cancellous and cortical bone, were fractured out from the distal femur and then reattached using one of two tissue adhesives. The adhesiveness of fibrin glue (Tisseeltm), and a novel, biocompatible, calcium phosphate-based tissue adhesive (OsStictm) were evaluated by pullout testing, in which glued cores were extracted and the peak force at failure recorded. The results show that Tisseel weakly bonded the metaphyseal bone cores, while OsStic produced > 30-fold higher mean peak forces at failure (7.64 Newtons (N) vs. 0.21 N). The failure modes were consistently disparate, with Tisseel failing gradually, while OsStic failed abruptly, as would be expected with a calcium-based material. Imaging of the bone/adhesive interface with microcomputed tomography revealed that, for OsStic, failure occurred more often within cancellous bone (75% of tested samples) rather than at the adhesive interface. CONCLUSIONS: Despite the challenges associated with biomechanical testing in small rodent models the preclinical ex-vivo test model presented herein is both sensitive and accurate. It enabled differences in tissue adhesive strength to be quantified even for very small osseous fragments (<Ø4mm). Importantly, this model can easily be scaled to larger animals and adapted to fracture fragment fixation in human bone. The present model is also compatible with other long-term in vivo evaluation methods (i.e. in vivo imaging, histological analysis, etc.).

In utero and lactational exposure to 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) affects bone tissue in rhesus monkeys.

Bone tissue is one of the target tissues for dioxins and dioxin-like compounds. Therefore, the aim of this study was to investigate effects of in utero and lactational exposure to 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD), on bone tissue in rhesus monkey, the most human-like experimental model available. Pregnant rhesus monkeys (Macaca mulatta; age 4-10 years) were exposed to TCDD with a total dose of 40.5-42.0 or 405-420ng/kg bodyweight by repeated subcutaneous injections starting at gestational day 20 and followed by injections every 30 days until 90 days after delivery. At a mean age of 7 years the offspring were sacrificed and the femur bone dissected. Results from peripheral Quantitative Computed Tomography (pQCT) analyses of the metaphyseal part of the femur bones in female offspring showed significant increases in trabecular bone mineral content (BMC; +84.6%, p<0.05, F-value (F)=5.9) in the low-dose treatment group compared with the controls. In the same animals, analysis of the mid-diaphyseal part revealed increases in total BMC (+21.3%, p<0.05, F=5.2) and cortical cross-sectional area (CSA; +16.4%, p<0.01, F=7.4) compared with the controls. In males, changes in biomechanical properties indicating more fragile bone were observed. Displacement at failure were significantly increased in the male low-dose group compared to the controls (+38.0%, p<0.05, F=11). The high dose of TCDD did not induce any significant changes in bone morphology. In conclusion, in utero and lactational low-dose, but not high-dose exposure to 2,3,7,8-TCDD induced disruption of bone tissue development in rhesus monkey, a result suggesting that similar effects might occur in humans also.

Health of herring gulls (Larus argentatus) in relation to breeding location in the early 1990s. III. Effects on the bone tissue.

Health effects associated with the Great Lakes environment were assessed in adult herring gulls (Larus argentatus) in the early 1990s, including the size and quality of their bones. Femurs were excised from 140 individuals from 10 colonies distributed throughout the Great Lakes and 2 reference colonies in Lake Winnipeg (freshwater) and the Bay of Fundy (marine). Femurs of gulls from the Great Lakes differed from the freshwater or marine reference for 9 of 12 variables of size, composition, and strength assessed using peripheral quantitative computed tomography (pQCT) and biomechanical testing. Femurs of Great Lakes gulls were significantly smaller in length (-2.9%), periosteal circumference (-2.4%), and cross-sectional area (-5.4%) than freshwater reference birds. Femurs of the Great Lakes gulls had a lower significant cortical bone mineral content (-8.1%) and density (-2%) than the marine reference. A significant increase in the amount the bone could bend before it broke (+34%) and the energy required to break it (+44%) and a significant decrease (-16.3%) in stiffness during three-point biomechanical bending test were also detected in Great Lakes versus the freshwater gulls. These differences are indicative of impaired mineralization. When divided into high and low 2,3,7,8-tetrachlorodibenzo-p-dioxin toxicity equivalent (TCDD-TEQ) colonies, the amount the bone could bend before it broke and the energy required to break it were significantly higher in the high TEQ colonies, but not high polychlorinated biphenyl (PCB) colonies. Breeding location and dietary choices of Great Lakes herring gulls in the early 1990s resulted in modulations of physiological processes that affected the size, mineralization, and biomechanical properties of bone.

Bone formation in interleukin-4 and interleukin-13 depleted mice.

BACKGROUND AND PURPOSE: Cytokines play an important role in the complex process of bone formation. We have previously found an altered skeletal phenotype with reduction of cortical bone mass in mice depleted of the 2 cytokines interleukin-4 (IL-4) and interleukin-13 (IL 13). The present study was performed to investigate a potential role of IL-4 and IL-13 in fracture healing and bone induction by demineralized xenogenic bone matrix (DXBM). METHODS: Callus formation in IL-4-(/)-IL-13-(/)- (IL-4/13 knockout) and wild-type (WT) male mice was compared using a standardized fracture model. The capacity of IL-4(-/-)IL-13(-/-) and WT male and female mice to form heterotopic bone was compared using intramuscular implants of DXBM. Bone formation and mechanical properties were evaluated by pQCT, ash weight, 3-point bending, radiology, and immunohistology. RESULTS: In the fracture investigation substantial amounts of new bone formation by 5 weeks were found, but no differences in radiographical healing, callus volume, BMD, BMC, or mechanical properties were detected between IL-4(-/-)IL-13(-/-) and WT mice. In the DXBM investigation radiographic analysis confirmed mineralization of implants in both groups, but no difference in the amount of mineral deposition (net bone formation) between IL-4(-/-)IL-13(-/-) and WT mice was found. Immunohistology showed inhibition of autonomic nerves in the capsule of the IL-4(-/-)IL-13(-/-) group along with a lack of vascularization within the implants. INTERPRETATION: Depletion of IL-4 and IL-13 does not cause any major alteration in fracture healing or heterotopic bone formation in mice. The pattern of autonomous nerve expression and expression of markers of neovascularization is, however, altered to some extent by the absence of IL-4 and IL-13.