RESUMO
Threshold damage mechanisms in brittle covalent-ionic solids are outlined. Fracture and deformation modes are analyzed in terms of classical contact mechanics. Distinctions are made between brittle, ductile and quasiplastic mechanisms in both axial and translational contact. Special attention is devoted to the relatively unexplored subthreshold region where macrofracture is largely suppressed, a region of increasing relevance in the relentless move toward ever smaller devices and precision shaping technologies in the manufacturing sector. Cross-section micrographic images illustrate the fundamental nature of shear events within the hardness deformation zone responsible for crack initiation and propagation. Basic analytical relations for the strengths of surfaces with contact-induced damage in the postthreshold and subthreshold regions are presented, with emphasis on concept rather than fine detail. Strength data for a prototypical brittle material after sharp-indenter damage are presented to highlight the vital role of microstructure in determining transitions between brittle and quasiplastic responses. Pristine defect-free solids are shown to be highly vulnerable to contact damage, even in the subthreshold region. Heterogeneous solids with granular microstructures have lower initial strengths, but are more flaw tolerant. Brittle solids are also highly susceptible to degradation by surface removal processes in wear and machining settings, to a large extent depending again on microstructure. Implications of these findings concerning advanced technological applications of covalent-ionic solids are discussed.
RESUMO
Hard and brittle solids with covalent/ionic bonding are used in a wide range of modern-day manufacturing technologies. Optimization of a shaping process can shorten manufacturing time and cost of component production, and at the same time extend component longevity. The same process may contribute to wear and fatigue degradation in service. Educated development of advanced finishing protocols for this class of solids requires a comprehensive understanding of damage mechanisms at small-scale contacts from a materials science perspective. In this article the fundamentals of brittle-ductile transitions in indentation stress fields are surveyed, with distinctions between axial and sliding loading and blunt and sharp contacts. Attendant deformation and removal mechanisms in microcontact processes are analyzed and discussed in the context of brittle and ductile machining and severe and mild wear. The central role of material microstructure in material removal modes is demonstrated.
RESUMO
Teeth of omnivores face a formidable evolutionary challenge: how to protect against fracture and abrasive wear caused by the wide variety of foods they process. It is hypothesized that this challenge is met in part by adaptations in enamel microstructure. The low-crowned teeth of humans and some other omnivorous mammals exhibit multiple fissures running longitudinally along the outer enamel walls, yet remain intact. It is proposed that inter-prism weakness and enamel property gradation act together to avert entry of these fissures into vulnerable inner tooth regions and, at the same time, confer wear resistance at the occlusal surface. A simple indentation experiment is employed to quantify crack paths and energetics in human enamel, and an extended-finite-element model to evaluate longitudinal crack growth histories. Consideration is given as to how tooth microstructure may have played a vital role in human evolution, and by extension to other omnivorous mammals.
Assuntos
Fraturas dos Dentes , Dente , Animais , Esmalte Dentário , HumanosRESUMO
The deformation and wear events that underlie microwear and macrowear signals commonly used for dietary reconstruction in fossil animals can be replicated and quantified by controlled laboratory tests on extracted tooth specimens in conjunction with fundamental micromechanics analysis. Key variables governing wear relations include angularity, stiffness (modulus), and size of the contacting particle, along with material properties of enamel. Both axial and sliding contacts can result in the removal of tooth enamel. The degree of removal, characterized by a "wear coefficient," varies strongly with particle content at the occlusal interface. Conditions leading to a transition from mild to severe wear are discussed. Measurements of wear traces can provide information about contact force and particle shape. The potential utility of the micromechanics methodology as an adjunct for investigating tooth durability and reconstructing diet is explored.
Assuntos
Dieta , Comportamento Alimentar/fisiologia , Fósseis , Dente/fisiologia , Animais , Esmalte Dentário/fisiologia , Paleontologia , Desgaste dos DentesRESUMO
It is hypothesised that specific tooth forms are adapted to resist fracture, in order to accommodate the high bite forces needed to secure, break down and consume food. Three distinct modes of tooth fracture are identified: longitudinal fracture, where cracks run vertically between the occlusal contact and the crown margin (or vice versa) within the enamel side wall; chipping fracture, where cracks run from near the edge of the occlusal surface to form a spall in the enamel at the side wall; and transverse fracture, where a crack runs horizontally through the entire section of the tooth to break off a fragment and expose the inner pulp. Explicit equations are presented expressing critical bite force for each fracture mode in terms of characteristic tooth dimensions. Distinctive transitions between modes occur depending on tooth form and size, and loading location and direction. Attention is focussed on the relatively flat, low-crowned molars of omnivorous mammals, including humans and other hominins and the elongate canines of living carnivores. At the same time, allusion to other tooth forms - the canines of the extinct sabre-tooth (Smilodon fatalis), the conical dentition of reptiles, and the columnar teeth of herbivores - is made to highlight the generality of the methodology. How these considerations impact on dietary behaviour in fossil and living taxa is discussed.
Assuntos
Evolução Biológica , Fraturas dos Dentes/patologia , Fraturas dos Dentes/fisiopatologia , Adaptação Fisiológica , Animais , Fenômenos Biomecânicos/fisiologia , Força de Mordida , Dente Canino/patologia , Dente Canino/fisiopatologia , Esmalte Dentário/patologia , Esmalte Dentário/fisiopatologia , Dieta/efeitos adversos , Dieta/veterinária , Humanos , Modelos Biológicos , Dente Molar/patologia , Dente Molar/fisiopatologia , Especificidade da Espécie , Fraturas dos Dentes/etiologia , Fraturas dos Dentes/veterináriaRESUMO
Primate teeth adapt to the physical properties of foods in a variety of ways including changes in occlusal morphology, enamel thickness, and overall size. We conducted a comparative study of extant primates to examine whether their teeth also adapt to foods through variation in the mechanical properties of the enamel. Nanoindentation techniques were used to map profiles of elastic modulus and hardness across tooth sections from the enamel-dentin junction to the outer enamel surface in a broad sample of primates including apes, Old World monkeys, New World monkeys, and lemurs. The measured data profiles feature considerable overlap among species, indicating a high degree of commonality in mechanical properties. These results suggest that differences in the load-bearing capacity of primate molar teeth are more a function of morphology-particularly tooth size and enamel thickness-than of underlying mechanical properties.
Assuntos
Esmalte Dentário/química , Esmalte Dentário/fisiologia , Dieta , Primatas/anatomia & histologia , Primatas/fisiologia , Adaptação Fisiológica , Animais , Módulo de Elasticidade , Dureza , HumanosRESUMO
Tooth enamel is inherently weak, with fracture toughness comparable with glass, yet it is remarkably resilient, surviving millions of functional contacts over a lifetime. We propose a microstructural mechanism of damage resistance, based on observations from ex situ loading of human and sea otter molars (teeth with strikingly similar structural features). Section views of the enamel implicate tufts, hypomineralized crack-like defects at the enamel-dentin junction, as primary fracture sources. We report a stabilization in the evolution of these defects, by "stress shielding" from neighbors, by inhibition of ensuing crack extension from prism interweaving (decussation), and by self-healing. These factors, coupled with the capacity of the tooth configuration to limit the generation of tensile stresses in largely compressive biting, explain how teeth may absorb considerable damage over time without catastrophic failure, an outcome with strong implications concerning the adaptation of animal species to diet.
Assuntos
Força Compressiva , Esmalte Dentário/lesões , Esmalte Dentário/fisiologia , Dente Molar/lesões , Dente Molar/fisiologia , Resistência à Tração , Animais , Esmalte Dentário/ultraestrutura , Humanos , Dente Molar/ultraestruturaRESUMO
The African Plio-Pleistocene hominins known as australopiths evolved a distinctive craniofacial morphology that traditionally has been viewed as a dietary adaptation for feeding on either small, hard objects or on large volumes of food. A historically influential interpretation of this morphology hypothesizes that loads applied to the premolars during feeding had a profound influence on the evolution of australopith craniofacial form. Here, we test this hypothesis using finite element analysis in conjunction with comparative, imaging, and experimental methods. We find that the facial skeleton of the Australopithecus type species, A. africanus, is well suited to withstand premolar loads. However, we suggest that the mastication of either small objects or large volumes of food is unlikely to fully explain the evolution of facial form in this species. Rather, key aspects of australopith craniofacial morphology are more likely to be related to the ingestion and initial preparation of large, mechanically protected food objects like large nuts and seeds. These foods may have broadened the diet of these hominins, possibly by being critical resources that australopiths relied on during periods when their preferred dietary items were in short supply. Our analysis reconciles apparent discrepancies between dietary reconstructions based on biomechanics, tooth morphology, and dental microwear.
Assuntos
Fenômenos Biomecânicos , Animais , Evolução Biológica , Dieta , Ecologia , Comportamento Alimentar , Análise de Elementos Finitos , Fósseis , Hominidae/anatomia & histologia , Macaca , Modelos Teóricos , Músculos/patologia , Paleontologia/métodos , SoftwareRESUMO
The large, bunodont postcanine teeth in living sea otters (Enhydra lutris) have been likened to those of certain fossil hominins, particularly the 'robust' australopiths (genus Paranthropus). We examine this evolutionary convergence by conducting fracture experiments on extracted molar teeth of sea otters and modern humans (Homo sapiens) to determine how load-bearing capacity relates to tooth morphology and enamel material properties. In situ optical microscopy and x-ray imaging during simulated occlusal loading reveal the nature of the fracture patterns. Explicit fracture relations are used to analyze the data and to extrapolate the results from humans to earlier hominins. It is shown that the molar teeth of sea otters have considerably thinner enamel than those of humans, making sea otter molars more susceptible to certain kinds of fractures. At the same time, the base diameter of sea otter first molars is larger, diminishing the fracture susceptibility in a compensatory manner. We also conduct nanoindentation tests to map out elastic modulus and hardness of sea otter and human molars through a section thickness, and microindentation tests to measure toughness. We find that while sea otter enamel is just as stiff elastically as human enamel, it is a little softer and tougher. The role of these material factors in the capacity of dentition to resist fracture and deformation is considered. From such comparisons, we argue that early hominin species like Paranthropus most likely consumed hard food objects with substantially higher biting forces than those exerted by modern humans.
Assuntos
Adaptação Biológica/fisiologia , Evolução Biológica , Dente Molar/fisiologia , Animais , Fenômenos Biomecânicos/fisiologia , Esmalte Dentário/fisiologia , Dieta , Módulo de Elasticidade/fisiologia , Dureza/fisiologia , Hominidae , Humanos , Mandíbula , Dente Molar/anatomia & histologia , Dente Molar/química , Lontras , Projetos de Pesquisa , Tomografia por Raios X , Suporte de CargaRESUMO
Until recently, there had been little attempt in the literature to identify and quantify the underlying mechanics of tooth durability in terms of materials engineering concepts. In humans and most mammals, teeth must endure a lifetime of sustained occlusal mastication-they have to resist fracture and wear. It is well documented that teeth are resilient, but what are the unique features that make this possible? The present article surveys recent materials engineering research aimed at addressing this fundamental question. Elements that determine the mechanics and micromechanics of tooth fracture and wear are analysed: at the macrostructural level, the geometry of the enamel shell and cuspal configuration; and at the microstructural level, interfacial weakness and property gradients. Inferences concerning dietary history in relation to evolutionary pressures are discussed.
RESUMO
Mammalian tooth enamel is often chipped, providing clear evidence for localized contacts with large hard food objects. Here, we apply a simple fracture equation to estimate peak bite forces directly from chip size. Many fossil hominins exhibit antemortem chips on their posterior teeth, indicating their use of high bite forces. The inference that these species must have consumed large hard foods such as seeds is supported by the occurrence of similar chips among known modern-day seed predators such as orangutans and peccaries. The existence of tooth chip signatures also provides a way of identifying the consumption of rarely eaten foods that dental microwear and isotopic analysis are unlikely to detect.
Assuntos
Força de Mordida , Dieta , Fósseis , Hominidae/anatomia & histologia , Hominidae/fisiologia , Animais , Humanos , Mamíferos/anatomia & histologia , Mamíferos/fisiologia , Sementes , Especificidade da Espécie , Dente/anatomia & histologia , Dente/fisiologiaRESUMO
The considerable variation in shape, size, structure and properties of the enamel cap covering mammalian teeth is a topic of great evolutionary interest. No existing theories explain how such variations might be fit for the purpose of breaking food particles down. Borrowing from engineering materials science, we use principles of fracture and deformation of solids to provide a quantitative account of how mammalian enamel may be adapted to diet. Particular attention is paid to mammals that feed on 'hard objects' such as seeds and dry fruits, the outer casings of which appear to have evolved structures with properties similar to those of enamel. These foods are important in the diets of some primates, and have been heavily implicated as a key factor in the evolutionary history of the hominin clade. As a tissue with intrinsic weakness yet exceptional durability, enamel could be especially useful as a dietary indicator for extinct taxa.
Assuntos
Esmalte Dentário/embriologia , Esmalte Dentário/fisiologia , Dieta , Dente/embriologia , Animais , Esmalte Dentário/anatomia & histologia , Evolução Molecular , Humanos , Mamíferos , Modelos Biológicos , Modelos Teóricos , Estresse Mecânico , Resistência à Tração , Dente/anatomia & histologia , Dente/fisiologiaRESUMO
The objective of this study is to elucidate the interdependence of competing mechanical degradation processes in biphasic dental materials with ceramic constituents in the region of high-pressure occlusal loading. It is hypothesized that wear resistance in this region correlates inversely with basic material parameters (modulus, hardness, toughness, strength) evaluated from 'standardized' test specimens. Ball-on-flat wear tests in simulation of oral function are used to quantify susceptibility to protracted sliding contact damage. Wear rates for this class of dental material tend to increase with quasistatic parameter values, so the latter do not provide a reliable guide to longevity. The generation of severe-wear facets involves cumulative quasiplastic deformation and microcrack coalescence at the grain level. It is implied that interplay between wear and fracture mechanisms should be an important consideration in future microstructural design of dental ceramics, especially in the quest to balance durability against esthetics.
Assuntos
Cerâmica , Fenômenos Mecânicos , Materiais Dentários , Porcelana Dentária , Dureza , Teste de Materiais , Propriedades de SuperfícieRESUMO
Comparative laboratory sliding wear tests on extracted human molar teeth in artificial saliva with third-body particulates demonstrate that phytoliths can be as effective as silica grit in the abrasion of enamel. A pin-on-disc wear testing configuration is employed, with an extracted molar cusp as a pin on a hard disc antagonist, under loading conditions representative of normal chewing forces. Concentrations and sizes of phytoliths in the wear test media match those of silica particles. Cusp geometries and ensuing abrasion volumes are measured by digital profilometry. The wear data are considered in relation to a debate by evolutionary biologists concerning the relative capacities of intrinsic mineral bodies within plant tissue and exogenous grit in the atmosphere to act as agents of tooth wear in various animal species.
Assuntos
Desgaste dos Dentes , Animais , Humanos , Mastigação , Dente Molar , Plantas , Dióxido de SilícioRESUMO
Lucas and colleagues recently proposed a model based on fracture and deformation concepts to describe how mammalian tooth enamel may be adapted to the mechanical demands of diet (Lucas et al.: Bioessays 30 2008 374-385). Here we review the applicability of that model by examining existing data on the food mechanical properties and enamel morphology of great apes (Pan, Pongo, and Gorilla). Particular attention is paid to whether the consumption of fallback foods is likely to play a key role in influencing great ape enamel morphology. Our results suggest that this is indeed the case. We also consider the implications of this conclusion on the evolution of the dentition of extinct hominins.
Assuntos
Adaptação Biológica , Esmalte Dentário/anatomia & histologia , Dieta , Hominidae/anatomia & histologia , Modelos Teóricos , Animais , Especificidade da Espécie , Estresse MecânicoRESUMO
Finite element analysis is conducted on a tooth model with different degrees of wear. The model is taken as a hemispherical shell (enamel) on a compliant interior (dentin). Occlusal loading is simulated by contact with a flat or curved, hard or soft, indenter. Stress redistributions indicate that development of a wear facet may enhance some near-contact fracture modes (cone-ring cracks, radial-median cracks, edge-chipping), but have little effect on far-field modes (margin cracks). Contacts on worn surfaces with small, hard food objects are likely to be most deleterious, generating local stress concentrations and thereby accelerating the wear process. More typical contacts with larger-scale soft foods are unlikely to have such adverse effects. Implications concerning dietary habits of animals is an adjunct consideration in this work.
Assuntos
Esmalte Dentário/fisiologia , Análise do Estresse Dentário , Dente/fisiologia , Anisotropia , Fenômenos Biomecânicos , Esmalte Dentário/química , Esmalte Dentário/fisiopatologia , Dentina/química , Análise de Elementos Finitos , Alimentos , Dureza , Humanos , Mastigação , Teste de Materiais , Modelos Biológicos , Pressão , Estresse Mecânico , Dente/fisiopatologia , Fraturas dos Dentes/diagnósticoRESUMO
OBJECTIVES: To survey simple contact testing protocols for evaluating the mechanical integrity of zirconia dental ceramics. Specifically, to map vital material property variations and to quantify competing damage modes. METHODS: Exploratory contact tests are conducted on layer structures representative of zirconia crowns on dentin. RESULTS: Sharp-tip micro- and nano-indentations were used to investigate the roles of weak interfaces and residual stresses in veneered zirconia, and to map property variations in graded structures. Tests with blunt sphere indenters on flat specimens were used to identify and quantify various critical damage modes in simulated occlusal loading in veneered and monolithic zirconia. SIGNIFICANCE: Contact testing is a powerful tool for elucidating the fracture and deformation modes that control the lifetimes of zirconia dental ceramics. The advocated tests are simple, and provide a sound physical basis for analyzing damage resistance of anatomically-correct crowns and other complex dental prostheses.
Assuntos
Falha de Restauração Dentária , Facetas Dentárias , Cerâmica , Coroas , Porcelana Dentária , Análise do Estresse Dentário , Teste de Materiais , ZircônioRESUMO
An investigation is made of wear mechanisms in a suite of dental materials with a ceramic component and tooth enamel using a laboratory test that simulates clinically observable wear facets. A ball-on-3-specimen wear tester in a tetrahedral configuration with a rotating hard antagonist zirconia sphere is used to produce circular wear scars on polished surfaces of dental materials in artificial saliva. Images of the wear scars enable interpretation of wear mechanisms, and measurements of scar dimensions quantify wear rates. Rates are lowest for zirconia ceramics, highest for lithium disilicate, with feldspathic ceramic and ceramic-polymer composite intermediate. Examination of wear scars reveals surface debris, indicative of a mechanism of material removal at the microstructural level. Microplasticity and microcracking models account for mild and severe wear regions. Wear models are used to evaluate potential longevity for each dental material. It is demonstrated that controlled laboratory testing can identify and quantify wear susceptibility under conditions that reflect the essence of basic occlusal contact. In addition to causing severe material loss, wear damage can lead to premature tooth or prosthetic failure.
Assuntos
Cerâmica , Materiais Dentários , Fenômenos Mecânicos , Esmalte Dentário , Humanos , Teste de MateriaisRESUMO
Results are presented for wear tests on human molar enamel in silica particle mediums. Data for different particle concentrations show severe wear indicative of material removal by plasticity-induced microcrack formation, in accordance with earlier studies. The wear rates are independent of low vol% particles, consistent with theoretical models in which occlusal loads are distributed evenly over all interfacial microcontacts. However, perhaps counter-intuitively, the wear rate diminishes substantially at higher vol%. This is attributed to a greater proportion of lower-load microcontacts transitioning into a region of mild wear, where microcracking is suppressed. Implications of these results in relation to evolutionary biology and dentistry are explored.
Assuntos
Esmalte Dentário/química , Dente Molar/fisiopatologia , Estresse Mecânico , Desgaste dos Dentes/fisiopatologia , Humanos , Propriedades de SuperfícieRESUMO
A study is made of the competition between failure modes in ceramic-based bilayer structures joined to polymer-based substrates, in simulation of dental crown-like structures with a functional but weak "veneer" layer bonded onto a strong "core" layer. Cyclic contact fatigue tests are conducted in water on model flat systems consisting of glass plates joined to glass, sapphire, alumina or zirconia support layers glued onto polycarbonate bases. Critical numbers of cycles to take each crack mode to failure are plotted as a function of peak contact load on failure maps showing regions in which each fracture mode dominates. In low-cycle conditions, radial and outer cone cracks are competitive in specimens with alumina cores, and outer cone cracks prevail in specimens with zirconia cores; in high-cycle conditions, inner cone cracks prevail in all cases. The roles of other factors, e.g. substrate modulus, layer thickness, indenter radius and residual stresses from specimen preparation, are briefly considered.