Experimental investigation of high-speed WDM-visible light communication using blue, green, and red InGaN µLEDs.

 Micro-light-emitting diodes (µLEDs) hold significant promise for applications in displays and visible light communication (VLC). This study substantiates the viability of a wavelength division multiplexing (WDM)-VLC system using InGaN blue, green, and red µLED devices. The devices exhibited notable color stability and high modulation bandwidth due to the weakly polarized electric field in the blue and green semipolar devices and the stress-optimized structure in the red device. The aggregated data rate reached 11.14 Gbps. Moreover, the blue, green, and red InGaN µLEDs exhibited a wide color gamut, encompassing 119.4% of the NTSC and 89.2% of the Rec. 2020 standards, affirming the potential of blue, green, and red InGaN µLEDs for applications in full-color display and WDM-VLC systems.

Improving optoelectronic performance and modulation bandwidth of green µ-LEDs via a compound pre-strained strategy.

A composite strain-modulation strategy to achieve high-performing green µ-LED devices for visible light communication is proposed. Compared with the conventional pre-well structure, introducing a pre-layer to enlarge the lateral lattice constant of the underlayer decreased the strain in the overall strain-modulated layer and MQW. This improved the crystal quality and suppressed the quantum confinement Stark effect. Using this modulation strategy, the green µ-LED array with the compound pre-strained structure exhibited a light output power of 20.5 mW and modulation bandwidth of 366 MHz, corresponding to improvements of 61% and 78%, respectively, compared with those of µ-LEDs with a pre-well structure.

Highly Luminescent Earth-Benign Organometallic Manganese Halide Crystals with Ultrahigh Thermal Stability of Emission from 4 to 623 K.

The phosphor-converted light-emitting diode (PC-LED) has become an indispensable solid-state lighting and display technologies in the modern society. Nevertheless, the use of scarce rare-earth elements and the thermal quenching (TQ) behavior are still two most crucial issues yet to be solved. Here, this work successfully demonstrates a highly efficient and thermally stable green emissive MnI2 (XanPO) crystals showing a notable photoluminescence quantum yield (PLQY) of 94% and a super TQ resistance from 4 to 623 K. This unprecedented superior thermal stability is attributed to the low electron-phonon coupling and the unique rigid crystal structure of MnI2 (XanPO) over the whole temperature range based on the temperature-dependent photoluminescence (PL) and single crystal X-ray diffraction (SCXRD) analyses. Considering these appealing properties, green PC-LEDs with a power efficacy of 102.5 lm W-1 , an external quantum efficiency (EQE) of 22.7% and a peak luminance up to 7750 000 cd m-2 are fabricated by integrating MnI2 (XanPO) with commercial blue LEDs. Moreover, the applicability of MnI2 (XanPO) in both micro-LEDs and organic light-emitting diodes (OLEDs) is also demonstrated. In a nutshell, this study uncovers a candidate of highly luminescent and TQ resistant manganese halide suitable for a variety of emission applications.

Increase in the efficiency of III-nitride micro LEDs by atomic layer deposition.

The effect of atomic-layer deposition (ALD) sidewall passivation on the enhancement of the electrical and optical efficiency of micro-light-emitting diode (µ-LED) is investigated. Various blue light µ-LED devices (from 5 × 5 µm2 to 100 × 100 µm2) with ALD-Al2O3 sidewall passivation were fabricated and exhibited lower leakage and better external quantum efficiency (EQE) comparing to samples without ALD-Al2O3 sidewall treatment. Furthermore, the EQE values of 5 × 5 and 10 × 10 µm2 devices yielded an enhancement of 73.47% and 66.72% after ALD-Al2O3 sidewall treatments process, and the output power also boosted up 69.3% and 69.9%. The Shockley-Read-Hall recombination coefficient can be extracted by EQE data fitting, and the recombination reduction in the ALD samples can be observed. The extracted surface recombination velocities are 551.3 and 1026 cm/s for ALD and no-ALD samples, respectively.

Divergent effect of liver X receptor agonists on prostate-specific antigen expression is dependent on androgen receptor in prostate carcinoma cells.

BACKGROUND: Liver X receptor (LXR) isoforms, LXRα and LXRß, have similar protein structures and ligands, but diverse tissue distribution. We used two synthetic, non-steroidal LXR agonists, T0901317 and GW3965, to investigate the effects of LXR agonist modulation on prostate specific antigen (PSA) via the expressions of androgen receptors (AR), LXRα, or LXRß, in prostate carcinoma cells. METHODS: LXRα- or LXRß-knockdown cells were transduced with specific shRNA lentiviral particles. LXRα and LXRß expressions were assessed by immunoblotting and RT-qPCR assays. Cell proliferation was determined by (3) H-thymidine incorporation assays. The effects of LXR agonists and epigallocatechin gallate (EGCG) on PSA expression were determined by ELISA, immunoblotting, or transient gene expression assays. RESULTS: Treatment with either T0901317 or GW3965 significantly attenuated cell proliferation of LNCaP cells. T0901317 treatment suppressed PSA expression while GW3965 treatment enhanced PSA expression. The increase of PSA promoter activity by GW3965 was dependent on the expression of AR. Either LXRα- or LXRß-knockdown did not affect the activation of androgen on PSA gene expression. However, as compared with mock knockdown-LNCaP cells, the LXRα-knockdown but not the LXRß-knockdown attenuated the effects of T0901317 and GW3965 on PSA expressions. The effect of GW3965 on PSA expression was blocked by the addition of EGCG. CONCLUSIONS: Our results indicate that T0901317 and GW3965 have divergent effects on PSA expressions. The effects of LXR agonists on PSA expression are LXRα-dependent and AR-dependent. EGCG blocks the inducing effect of GW3965 on PSA expression.

Advancing LED technology: the FDCSP element's breakthrough in mini and micro-LED packaging and backlight module enhancement.

In this research, we introduce an advanced methodology for the calculation of bulk light sources tailored for free-form surface design, focusing on the principle of energy conservation. This method is especially relevant for the evolving needs of micro-LED packaging, highlighting its potential in this burgeoning field. Our work includes the development of an algorithm for creating freeform-designed chip-scale package (FDCSP) components. These components seamlessly integrate LEDs and lenses, underscoring our commitment to advancing free-form surface design in chip-level packaging. By adhering to the principle of energy conservation, our approach facilitates a meticulous comparison of simulation outcomes with predefined target functions. This enables the iterative correction of discrepancies, employing layering techniques to refine the design until the simulated results closely align with our goals, as demonstrated by an appropriate difference curve. The practical application of these simulations leads to the innovative design of FDCSP devices. Notably, these devices are not just suitable for traditional applications in backlight modules but are explicitly optimized for the emerging sector of micro-LED packaging. Our successful demonstration of these FDCSP devices within backlight modules represents a significant achievement. It underscores the effectiveness of our design strategy and its expansive potential to transform micro-LED packaging solutions. This research not only contributes to the theoretical understanding of energy conservation in lighting design but also paves the way for groundbreaking applications in micro-LED and backlight module technologies.

InGaN blue resonant cavity micro-LED with RGY quantum dot layer for broad gamut, efficient displays.

The technology of RGBY micro resonant cavity light emitting diodes (micro-RCLEDs) based on quantum dots (QDs) is considered one of the most promising approaches for full-color displays. In this work, we propose a novel structure combining a high color conversion efficiency (CCE) QD photoresist (QDPR) color conversion layer (CCL) with blue light micro RCLEDs, incorporating an ultra-thin yellow color filter. The additional TiO2 particles inside the QDPR CCL can scatter light and disperse QDs, thus reducing the self-aggregation phenomenon and enhancing the eventual illumination uniformity. Considering the blue light leakage, the influences of adding different color filters are investigated by illumination design software. Finally, the introduction of low-temperature atomic layer deposition (ALD) passivation protection technology at the top of the CCL can enhance the device's reliability. The introduction of RGBY four-color subpixels provides a viable path for developing low-energy consumption, high uniformity, and efficient color conversion displays.

Innovative Stacked Yellow and Blue Mini-LED Chip for White Lamp Applications.

This study introduces a novel approach for fabricating vertically stacked mini-LED arrays, integrating InGaN yellow and blue epitaxial layers with a stress buffer layer to enhance optoelectronic characteristics and structural stability. This method significantly simplifies the LED design by reducing the need for RGB configurations, thus lowering costs and system complexity. Employing vertical stacking integration technology, the design achieves high-density, efficient white light production suitable for multifunctional applications, including automotive lighting and outdoor signage. Experimental results demonstrate the exceptional performance of the stacked yellow and blue mini-LEDs in terms of luminous efficiency, wavelength precision, and thermal stability. The study also explores the performance of these LEDs under varying temperature conditions and their long-term reliability, indicating that InGaN-based yellow LEDs offer superior performance over traditional AlGaInP yellow LEDs, particularly in high-temperature environments. This technology promises significant advancements in the design and application of lighting systems, with potential implications for both automotive and general illumination markets.

Advancing high-performance visible light communication with long-wavelength InGaN-based micro-LEDs.

This study showcases a method for achieving high-performance yellow and red micro-LEDs through precise control of indium content within quantum wells. By employing a hybrid quantum well structure with our six core technologies, we can accomplish outstanding external quantum efficiency (EQE) and robust stripe bandwidth. The resulting 30 µm × 8 micro-LED arrays exhibit maximum EQE values of 11.56% and 5.47% for yellow and red variants, respectively. Notably, the yellow micro-LED arrays achieve data rates exceeding 1 Gbit/s for non-return-to-zero on-off keying (NRZ-OOK) format and 1.5 Gbit/s for orthogonal frequency-division multiplexing (OFDM) format. These findings underscore the significant potential of long-wavelength InGaN-based micro-LEDs, positioning them as highly promising candidates for both full-color microdisplays and visible light communication applications.

Recent Advances in Micro-LEDs Having Yellow-Green to Red Emission Wavelengths for Visible Light Communications.

Visible light communication (VLC), which will primarily support high-speed internet connectivity in the contemporary world, has progressively come to be recognized as a significant alternative and reinforcement in the wireless communication area. VLC has become more popular recently because of its many advantages over conventional radio frequencies, including a higher transmission rate, high bandwidth, low power consumption, fewer health risks, and reduced interference. Due to its high-bandwidth characteristics and potential to be used for both illumination and communications, micro-light-emitting diodes (micro-LEDs) have drawn a lot of attention for their use in VLC applications. In this review, a detailed overview of micro-LEDs that have long emission wavelengths for VLC is presented, along with their related challenges and future prospects. The VLC performance of micro-LEDs is influenced by a number of factors, including the quantum-confined Stark effect (QCSE), size-dependent effect, and droop effect, which are discussed in the following sections. When these elements are combined, it has a major impact on the performance of micro-LEDs in terms of their modulation bandwidth, wavelength shift, full-width at half maximum (FWHM), light output power, and efficiency. The possible challenges faced in the use of micro-LEDs were analyzed through a simulation conducted using Crosslight Apsys software and the results were compared with the previous reported results. We also provide a brief overview of the phenomena, underlying theories, and potential possible solutions to these issues. Furthermore, we provide a brief discussion regarding micro-LEDs that have emission wavelengths ranging from yellow-green to red colors. We highlight the notable bandwidth enhancement for this paradigm and anticipate some exciting new research directions. Overall, this review paper provides a brief overview of the performance of VLC-based systems based on micro-LEDs and some of their possible applications.

Ameliorating Uniformity and Color Conversion Efficiency in Quantum Dot-Based Micro-LED Displays through Blue-UV Hybrid Structures.

Quantum dot (QD)-based RGB micro light-emitting diode (µ-LED) technology shows immense potential for achieving full-color displays. In this study, we propose a novel structural design that combines blue and quantum well (QW)-intermixing ultraviolet (UV)-hybrid µ-LEDs to achieve high color-conversion efficiency (CCE). For the first time, the impact of various combinations of QD and TiO2 concentrations, as well as thickness variations on photoluminescence efficiency (PLQY), has been systematically examined through simulation. High-efficiency color-conversion layer (CCL) have been successfully fabricated as a result of these simulations, leading to significant savings in time and material costs. By incorporating scattering particles of TiO2 in the CCL, we successfully scatter light and disperse QDs, effectively reducing self-aggregation and greatly improving illumination uniformity. Additionally, this design significantly enhances light absorption within the QD films. To enhance device reliability, we introduce a passivation protection layer using low-temperature atomic layer deposition (ALD) technology on the CCL surface. Moreover, we achieve impressive CCE values of 96.25% and 92.91% for the red and green CCLs, respectively, by integrating a modified distributed Bragg reflector (DBR) to suppress light leakage. Our hybrid structure design, in combination with an optical simulation system, not only facilitates rapid acquisition of optimal parameters for highly uniform and efficient color conversion in µ-LED displays but also expands the color gamut to achieve 128.2% in the National Television Standards Committee (NTSC) space and 95.8% in the Rec. 2020 standard. In essence, this research outlines a promising avenue towards the development of bespoke, high-performance µ-LED displays.

Investigations on the high performance of InGaN red micro-LEDs with single quantum well for visible light communication applications.

In this study, we have demonstrated the potential of InGaN-based red micro-LEDs with single quantum well (SQW) structure for visible light communication applications. Our findings indicate the SQW sample has a better crystal quality, with high-purity emission, a narrower full width at half maximum, and higher internal quantum efficiency, compared to InGaN red micro-LED with a double quantum wells (DQWs) structure. The InGaN red micro-LED with SQW structure exhibits a higher maximum external quantum efficiency of 5.95% and experiences less blueshift as the current density increases when compared to the DQWs device. Furthermore, the SQW device has a superior modulation bandwidth of 424 MHz with a data transmission rate of 800 Mbit/s at an injection current density of 2000 A/cm2. These results demonstrate that InGaN-based SQW red micro-LEDs hold great promise for realizing full-color micro-display and visible light communication applications.

Evaluation of atmospheric PCDD/F depositions via automated and traditional water surface samplers in Taiwan.

Polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) are a group of compounds of major environmental concern. Once emitted into the atmosphere, PCDD/Fs undergo photochemical reactions and enter other environmental compartments via wet and dry deposition. In this study, atmospheric PCDD/F depositions were collected via an automated PCDD/F deposition sampler and traditional cylindrical vessels, respectively, in northern, central, and southern Taiwan from 2008 to 2010. The automated PCDD/F precipitation sampler used in this study can prevent both resuspension and photodegradation of the PCDD/Fs collected and also effectively separates the PCDD/F samples into dry and wet contributions. The results indicate that the average atmospheric PCDD/F concentrations collected by the high-volume sampling trains were 13.6 ± 10 (n = 10), 15.6 ± 5.2 (n = 7), and 10.9 ± 6.3 (n = 6) fg I-TEQ/m(3) in northern, central, and southern Taiwan, respectively. In addition, the results also indicate that the PCDD/F deposition flux collected with an automated PCDD/F sampler (1.84 ± 0.90-8.68 ± 5.1 pg I-TEQ/m(2)/day, n = 23) is significantly higher than that sampled with cylindrical vessels (1.11 ± 0.69-5.64 ± 5.2 pg I-TEQ/m(2)/day, n = 23). Based on the Mann-Whitney statistical analysis, the p value (0.037) of PCDD/F deposition flux between those two samplers measurement is lower than 0.05. The difference is attributed to the fact that part of the PCDD/F depositions collected by traditional cylindrical vessels is photodegraded and revolatilized. In addition, the wet deposition flux of PCDD/Fs (3.66 to 470 pg I-TEQ/m(2)/rainy day, n = 23) observed in Taiwan is significantly higher than the dry deposition flux (0.38 to 4.55 pg I-TEQ/m(2)/sunny day, n = 23). The results demonstrate that the wet deposition is the major PCDD/F removal mechanism in the atmosphere. Furthermore, the overall PCDD/Fs deposition velocity and scavenging (rainout) coefficient in Taiwan are calculated as 0.20 ± 0.07 cm/s and 6.5 ± 0.2 × 10(4), respectively.

Bioactive Vitamin D Attenuates MED28-Mediated Cell Growth and Epithelial-Mesenchymal Transition in Human Colorectal Cancer Cells.

Inadequate vitamin D status may increase the risk of developing multiple types of cancer. Epidemiological studies suggest an inverse association between 25-hydroxyvitamin D3 (25(OH)D3) and malignancy, including colorectal cancer. Previous studies have suggested that MED28, a Mediator subunit involved in transcriptional regulation, is associated with the growth of colorectal cancer cells; however, its role in the progression of metastasis such as epithelial-mesenchymal transition (EMT) and cell migration of colorectal cancer is unclear at present. The aim of this study was to investigate a potentially suppressive effect of calcitriol, 1,25-dihydroxyvitamin D3 (1,25(OH)2D3), a bioactive form of vitamin D, and the role of MED28 in the progression of EMT in human colorectal cancer cells. Suppression of MED28 increased the expression of E-cadherin and reduced the expression of several mesenchymal and migration biomarkers and Wnt/ß-catenin signaling molecules, whereas overexpression of MED28 enhanced the EMT features. Calcitriol suppressed the expression of MED28, and the effect of calcitriol mirrored that of MED28 silencing. Our data indicate that calcitriol attenuated MED28-mediated cell growth and EMT in human colorectal cancer cells, underlining the significance of MED28 in the progression of colorectal cancer and supporting the potential translational application of calcitriol.

High-Reliability Perovskite Quantum Dots Using Atomic Layer Deposition Passivation for Novel Photonic Applications.

In this study, we propose highly stable perovskite quantum dots (PQDs) coated with Al2O3 using atomic layer deposition (ALD) passivation technology. This passivation layer effectively protects the QDs from moisture infiltration and oxidation as well as from high temperatures and any changes in the material characteristics. They exhibit excellent wavelength stability and reliability in terms of current variation tests, long-term light aging tests, and temperature/humidity tests (60°/90%). A white-light system has been fabricated by integrating a micro-LED and red phosphor exhibiting a high data transmission rate of 1 Gbit/s. These results suggest that PeQDs treated with ALD passivation protection offer promising prospects in full-color micro-displays and high-speed visible-light communication (VLC) applications.

Gateway towards recent developments in quantum dot-based light-emitting diodes.

Quantum dots (QDs), with their excellent photoluminescence, narrow emission linewidth, and wide color coverage, provide unrivaled advantages for advanced display technologies, enabling full-color micro-LED displays. It is indeed critical to have a fundamental understanding of how QD properties affect micro-LED display performance in order to develop the most energy-efficient display device in the near future. However, to take a more detailed look at the stability issues and passivation ways of QDs is essential for accelerating the commercialization of QD-based LED technologies. Knowing about the most recent breakthroughs in QD-based LEDs can give a good indication of how they might be used in shaping the future of displays. In this review, we discuss the characteristics of QD-based LEDs for the applications of display and lighting technologies. Various approaches for synthesis and the stability improvement of QDs are addressed in detail, along with recent advancements towards QD-based LED breakthroughs. Moreover, we summarize our latest research findings in QD-based LEDs, providing valuable information about the potential of QD-based LEDs for future display technologies.

Growth differentiation factor-15: a p53- and demethylation-upregulating gene represses cell proliferation, invasion, and tumorigenesis in bladder carcinoma cells.

Growth differentiation factor-15 (GDF15), a member of the TGF-ß superfamily, affects tumor biology of certain cancers, but remains poorly understood in bladder cancer cells. This study determined the expression, regulation, function, and potential downstream target genes of GDF15 in bladder carcinoma cells. The transitional papilloma carcionoma cells (RT4) expressed higher levels of GDF15 as compared with the bladder carcinoma cells (HT1376 and T24). Treatments of recombinant human GDF15 (rhGDF15) reduced the proliferations of HT1376 and T24 cells. Expression of GDF15 was upregulated via DNA demethylation and p53. The cell proliferation, invasion, and tumorigenesis were reduced in ectopic overexpression of GDF15, while enhanced in GDF15 knockdown. The expressions of mammary serine protease inhibitor (MASPIN) and N-myc downstream-regulated family genes (NDRG1, NDRG2, and NDRG3) were upregulated by GDF15 overexpressions and rhGDF15 treatments in bladder carcinoma cells. GDF15 knockdown induced epithelial-mesenchymal transition (EMT) and F-actin polarization in HT1376 cells. Our results suggest that enhanced expressions of MASPIN and N-myc downstream-regulated family genes and the modulation of EMT may account for the inhibitory functions of GDF15 in the cell proliferation, invasion, and tumorigenesis of bladder carcinoma cells. The GDF15 should be considered as a tumor suppressor in human bladder carcinoma cells.

Sampling and analysis of ambient dioxins in northern Taiwan.

In this study, ambient air samples were taken concurrently in the vicinity area of a large-scale municipal waste incinerator (MWI) and the background area for measuring polychlorinated dibenzo-p-dioxins and furans (PCDD/Fs) concentrations from November 1999 through July 2000 in northern Taiwan. The results obtained from eighteen ambient air samples indicate that the mean PCDD/F concentration of seventeen 2,3,7,8-substituted congeners in wintertime (188-348 fg-I-TEQ/m(3)) is significantly higher than that measured in summertime (56-166 fg-I-TEQ/m(3)). In addition, the seasonal PCDD/F concentrations are compared with the ambient air quality data including CO, NO(2), PM(10) and TSP sampled from Taipei area to gain better insights. It indicates that the variation of ambient air PCDD/F concentrations is closely correlated with that of PM(10) concentrations. Besides, the results indicate that the I-TEQ concentration of ambient air in sampling site B (directly downwind of the MWI) is of the highest while the sampling site A (upwind of MWI) is of the lowest among all sampling sites. This implies that existing MWI can be a significant emitter of PCDD/Fs in this area. Furthermore, the patterns of the PCDD/F congener distribution at all sampling sites (including the background site in Taoyuan) are quite similar. OCDD concentration is of the highest among seventeen PCDD/F congeners investigated and accounts for about 35% of the total concentration. As for the I-TEQ concentrations, 2,3,4,7,8-PeCDF is the most significant contributor, generally being responsible for 30-45% of the total I-TEQ values depending on the sampling sites and seasons.

Sources and deposition fluxes of PCDD/Fs in a high-mountain lake in central Taiwan.

Sun Moon Lake (SML) is located at 23°52'N, 120°55'E near the center of Taiwan Island. In 2009, deposition of polychlorinated dibenzo-p-dioxin and dibenzofuran (PCDD/F) in ambient air, water bodies and sediments were measured in SML in this study. The monthly atmospheric PCDD/F deposition ranged from 0.61 to 3.0 pg I-TEQm(-2)d(-1) in the vicinity area of SML. Average PCDD/F concentrations (0.008-0.012 pg I-TEQ L(-1)) in the surface water were uniform and sufficiently mixed at the center, outflow and south bay of SML. However, the PCDD/F content (2.42±0.5 ng I-TEQ kg(-1) d.w.) of surface sediments measured at the south bay of SML was significantly higher than the PCDD/F content at other sampling sites. To evaluate the anthropogenic pollution history in central Taiwan, PCDD/F concentrations were also analyzed at 1-2 cm intervals in three dated sediment cores collected at different locations of SML. The year dating by the sediment cores at different depths was estimated from the sedimentation rate (0.47±0.13-1.35±0.22 cm y(-1)) calculated by (210)Pb and (137)Cs analysis. Based on the results of isotope analysis of sediment cores collected from the center, outflow and south bay of SML, PCDD/F concentrations at different locations appeared to be quite similar. PCDD/F concentrations in sediment cores began to increase in 1964 and reached a peak (4.78 ng I-TEQ kg(-1) d.w.) in 1968. In addition, variation in PCDD/F content at different depth of the sediment cores appeared to correlate directly with the rate of organochlorine pesticides production in Taiwan.

Mechanisms by which interleukin-6 attenuates cell invasion and tumorigenesis in human bladder carcinoma cells.

Interleukin-6, a multifunctional cytokine, contributes to tumor cell proliferation and differentiation. However, the biological mechanisms that are affected by the expression of interleukin-6 in bladder cancer cells remain unclear. We evaluated the effects of interleukin-6 expression in human bladder carcinoma cells in vitro and in vivo. The results of interleukin-6-knockdown experiments in T24 cells and interleukin-6-overexpression experiments in HT1376 cells revealed that interleukin-6 reduced cell proliferation, migration, and invasion in vitro. Xenograft animal studies indicated that the overexpression of interleukin-6 downregulated tumorigenesis of bladder cells and that interleukin-6 knockdown reversed this effect. The results of RT-PCR, immunoblotting, and reporter assays indicated that the overexpression of interleukin-6 upregulated the expression of the mammary serine protease inhibitor (MASPIN), N-myc downstream gene 1 (NDRG1), and KAI1 proteins in HT1376 cells and that interleukin-6 knockdown reduced the expression of these proteins in T24 cells. In addition, results of immunoblotting assays revealed that interleukin-6 modulated epithelial-mesenchymal transitions by upregulating the expression of the E-cadherin, while downregulation N-cadherin and vimentin proteins. Our results suggest that the effects of interleukin-6 on the regulation of epithelial-mesenchymal transitions and the expressions of the MASPIN, NDRG1, and KAI1 genes attribute to the modulation of tumorigenesis in human bladder carcinoma cells.