Metastable hexagonal close-packed palladium hydride in liquid cell TEM.

Metastable phases-kinetically favoured structures-are ubiquitous in nature1,2. Rather than forming thermodynamically stable ground-state structures, crystals grown from high-energy precursors often initially adopt metastable structures depending on the initial conditions, such as temperature, pressure or crystal size1,3,4. As the crystals grow further, they typically undergo a series of transformations from metastable phases to lower-energy and ultimately energetically stable phases1,3,4. Metastable phases sometimes exhibit superior physicochemical properties and, hence, the discovery and synthesis of new metastable phases are promising avenues for innovations in materials science1,5. However, the search for metastable materials has mainly been heuristic, performed on the basis of experiences, intuition or even speculative predictions, namely 'rules of thumb'. This limitation necessitates the advent of a new paradigm to discover new metastable phases based on rational design. Such a design rule is embodied in the discovery of a metastable hexagonal close-packed (hcp) palladium hydride (PdHx) synthesized in a liquid cell transmission electron microscope. The metastable hcp structure is stabilized through a unique interplay between the precursor concentrations in the solution: a sufficient supply of hydrogen (H) favours the hcp structure on the subnanometre scale, and an insufficient supply of Pd inhibits further growth and subsequent transition towards the thermodynamically stable face-centred cubic structure. These findings provide thermodynamic insights into metastability engineering strategies that can be deployed to discover new metastable phases.

Computational design of novel MAX phase alloys as potential hydrogen storage media combining first principles and cluster expansion methods.

Finding a suitable material for hydrogen storage under ambient atmospheric conditions is challenging for material scientists and chemists. In this work, using a first principles based cluster expansion approach, the hydrogen storage capacity of the Ti2AC (A = Al, Ti, Cr, Mn, Fe, Co, Ni, Cu, and Zn) MAX phase and its alloys was studied. We found that hydrogen is energetically stable in Ti-A layers in which the tetrahedral site consisting of one A atom and three Ti atoms is energetically more favorable for hydrogen adsorption than other sites in the Ti-A layer. Ti2CuC has the highest hydrogen adsorption energy than other Ti2AC phases. We find that the 83.33% Cu doped Ti2AlxCu1-xC alloy structure is both energetically and dynamically stable and can store 3.66 wt% hydrogen under ambient atmospheric conditions, which is higher than that stored by both Ti2AlC and Ti2CuC phases. These findings indicate that the hydrogen capacity of the MAX phase can be significantly improved by doping an appropriate atom species.

Effects of Lymantria dispar multiple nucleopolyhedrovirus and Bacillus thuringiensis var. kurstaki on different larval instars of Lymantria dispar asiatica.

Outbreaks of Lymantria dispar asiatica (the Asian spongy moth; Lepidoptera: Erebidae) occur sporadically, causing widespread damage to forest and fruit trees. Owing to the development of pesticide resistance and environmental contamination, biopesticides, including L. dispar multiple nucleopolyhedrovirus (LdMNPV) and Bacillus thuringiensis var. kurstaki (Btk), can significantly contribute to controlling overall larval stage of this species. Although both pathogens are highly effective at the larval stage, their effects on different instar stages have not been investigated. In this study, we analyzed the mortality and lethality in different L. dispar asiatica instars exposed to single or combined pathogen treatments. Treatments with low or medium LdMNPV concentrations induced lower mortality and had higher LT50 values at the 4th and 5th instars compared with other instars, whereas high LdMNPV treatments induced high mortality in all instars, with higher LT50 values at later instars. Treatment with Btk induced a rapid 100% mortality in all instars, with higher LT50 values for the later instars. The combination of LdMNPV and Btk delayed the killing time compared with the effects of single treatments, with the effect being more pronounced in the 1st and 5th instar stage than at other stages at low Btk concentrations. Our findings indicate that the pathogenic effects of LdMNPV and Btk on L. dispar asiatica differ according to larval stage, thereby providing novel insights into enhancing the biological control efficacy of these agents against L. dispar asiatica in the field.

Exaptation of I4760M mutation in ryanodine receptor of Spodoptera exigua (Lepidoptera: Noctuidae): Lessons from museum and field samples.

Since 2007, diamide insecticides have been widely used in Korea to control various types of lepidopteran pests including Spodoptera exigua. For nearly a decade, diamide resistance in field populations of S. exigua across 18 localities has been monitored using bioassays. Despite their short history of use, resistance to diamide insecticides has emerged. Based on the LC50 values, some field populations showed a higher level of resistance to chlorantraniliprole, a diamide insecticide, compared to that of the susceptible strain, although regional and temporal variations were observed. To investigate resistance at a molecular level, we examined three mutations (Y4701C, I4790M, and G4946E) in the ryanodine receptor (RyR), which is the primary mechanism underlying diamide insecticide resistance. DNA sequencing showed that only the I4790M mutation was found in most field populations. As resistance levels varied significantly despite the uniform presence of the I4790M mutation, we considered the presence of another resistance factor. Further, the I4790M mutation was also found in S. exigua specimens collected prior to the commercialization of diamide insecticides in Korea as well as in other countries, such as the USA. This finding led us to hypothesize that the I4790M mutation were predisposed in field populations owing to selection factors other than diamide use. For further clarification, we conducted whole-genome sequencing of S. exigua (449.83 Mb) and re-sequencing of 18 individual whole genomes. However, no additional non-synonymous mutations were detected in the RyR-coding region. Therefore, we concluded that the high level of diamide insecticide resistance in Korean S. exigua is not caused by mutations at the target site, RyR, but is attributed to other factors that need to be investigated in future studies.

Curcuma phaeocaulis Inhibits NLRP3 Inflammasome in Macrophages and Ameliorates Nanoparticle-Induced Airway Inflammation in Mice.

The activation of NLRP3 results in the assembly of inflammasome that regulates caspase-1 activation and the subsequent secretion of bioactive interleukin (IL)-1ß. Excessive activation of the NLRP3 inflammasome is mechanistically linked to diverse pathophysiological conditions, including airway inflammation. Here, we discovered that Curcuma phaeocaulis can suppress caspase-1 activation and processing of pro-IL-1ß into mature cytokine in macrophages stimulated with NLRP3 inflammasome activators, such as SiO2 or TiO2 nanoparticles. Furthermore, in the bronchoalveolar lavage fluids of animals administered the nanoparticles, the in vitro effects of C. phaeocaulis translated into a decrease in IL-1ß levels and cell infiltration. Demethoxycurcumin (DMC) and curcumin were found to be responsible for the inflammasome inhibitory activity of C. phaeocaulis. Interestingly, in contrast to the previously reported higher antioxidant- and NFκB-inhibitory activities of curcumin, DMC exhibited approximately two-fold stronger potency than curcumin against nanoparticle induced activation of NLRP3 inflammasome. In the light of these results, both compounds seem to act independently of their antioxidant- and NFκB-inhibitory properties. Although how C. phaeocaulis inhibits nanoparticle-activated NLRP3 inflammasome remains to be elucidated, our results provide a basis for further research on C. phaeocaulis extract as an anti-inflammatory agent for the treatment of disorders associated with excessive activation of NLRP3 inflammasome.

Structural Diversity and Trends in Properties of an Array of Hydrogen-Rich Ammonium Metal Borohydrides.

Metal borohydrides are a fascinating and continuously expanding class of materials, showing promising applications within many different fields of research. This study presents 17 derivatives of the hydrogen-rich ammonium borohydride, NH4BH4, which all exhibit high gravimetric hydrogen densities (>9.2 wt % of H2). A detailed insight into the crystal structures combining X-ray diffraction and density functional theory calculations exposes an intriguing structural variety ranging from three-dimensional (3D) frameworks, 2D-layered, and 1D-chainlike structures to structures built from isolated complex anions, in all cases containing NH4+ countercations. Dihydrogen interactions between complex NH4+ and BH4- ions contribute to the structural diversity and flexibility, while inducing an inherent instability facilitating hydrogen release. The thermal stability of the ammonium metal borohydrides, as a function of a range of structural properties, is analyzed in detail. The Pauling electronegativity of the metal, the structural dimensionality, the dihydrogen bond length, the relative amount of NH4+ to BH4-, and the nearest coordination sphere of NH4+ are among the most important factors. Hydrogen release usually occurs in three steps, involving new intermediate compounds, observed as crystalline, polymeric, and amorphous materials. This research provides new opportunities for the design and tailoring of novel functional materials with interesting properties.

Ammonium-Ammonia Complexes, N2H7+, in Ammonium closo-Borate Ammines: Synthesis, Structure, and Properties.

Metal closo-borates have recently received significant attention due to their potential applications as solid-state ionic conductors. Here, the synthesis, crystal structures, and properties of (NH4)2B10H10·xNH3 (x = 1/2, 1 (α and ß)) and (NH4)2B12H12·xNH3 (x = 1 and 2) are reported. In situ synchrotron radiation powder X-ray diffraction allows for the investigation of structural changes as a function of temperature. The structures contain the complex cation N2H7+, which is rarely observed in solid materials, but can be important for proton conductivity. The structures are optimized by density functional theory (DFT) calculations to validate the structural models and provide detailed information about the hydrogen positions. Furthermore, the hydrogen dynamics of the complex cation N2H7+ are studied by molecular dynamics simulations, which reveals several events of a proton transfer within the N2H7+ units. The thermal properties are investigated by thermogravimetry and differential scanning calorimetry coupled with mass spectrometry, revealing that NH3 is released stepwise, which results in the formation of (NH4)2BnHn (n = 10 and 12) during heating. The proton conductivity of (NH4)2B12H12·xNH3 (x = 1 and 2) determined by electrochemical impedance spectroscopy is low but orders of magnitude higher than that of pristine (NH4)2B12H12. The thermal stability of the complex cation N2H7+ is high, up to 170 °C, which may provide new possible applications of these proton-rich materials.

Ammine Lanthanum and Cerium Borohydrides, M(BH4)3·nNH3; Trends in Synthesis, Structures, and Thermal Properties.

Ammine metal borohydrides show potential for solid-state hydrogen storage and can be tailored toward hydrogen release at low temperatures. Here, we report the synthesis and structural characterization of seven new ammine metal borohydrides, M(BH4)3·nNH3, M = La (n = 6, 4, or 3) or Ce (n = 6, 5, 4, or 3). The two compounds with n = 6 are isostructural and have new orthorhombic structure types (space group P21212) built from cationic complexes, [M(NH3)6(BH4)2]+, and are charge balanced by BH4-. The structure of Ce(BH4)3·5NH3 is orthorhombic (space group C2221) and is built from cationic complexes, [Ce(NH3)5(BH4)2]+, and charge balanced by BH4-. These are rare examples of borohydride complexes acting both as a ligand and as a counterion in the same compound. The structures of M(BH4)3·4NH3 are monoclinic (space group C2), built from neutral molecular complexes of [M(NH3)4(BH4)3]. The new compositions, M(BH4)3·3NH3 (M = La, Ce), among ammine metal borohydrides, are orthorhombic (space group Pna21), containing molecular complexes of [M(NH3)3(BH4)3]. A revised structural model for A(BH4)3·5NH3 (A = Y, Gd, Dy) is presented, and the previously reported composition A(BH4)3·4NH3 (A = Y, La, Gd, Dy) is proposed in fact to be M(BH4)3·3NH3 along with a new structural model. The temperature-dependent structural properties and decomposition are investigated by in situ synchrotron radiation powder X-ray diffraction in vacuum and argon atmosphere and by thermal analysis combined with mass spectrometry. The compounds with n = 6, 5, and 4 mainly release ammonia at low temperatures, while hydrogen evolution occurs for M(BH4)3·3NH3 (M = La, Ce). Gas-release temperatures and gas composition from these compounds depend on the physical conditions and on the relative stability of M(BH4)3·nNH3 and M(BH4)3.

The mechanism of Mg2+ conduction in ammine magnesium borohydride promoted by a neutral molecule.

Light weight and cheap electrolytes with fast multi-valent ion conductivity can pave the way for future high-energy density solid-state batteries, beyond the lithium-ion battery. Here we present the mechanism of Mg-ion conductivity of monoammine magnesium borohydride, Mg(BH4)2·NH3. Density functional theory calculations (DFT) reveal that the neutral molecule (NH3) in Mg(BH4)2·NH3 is exchanged between the lattice and interstitial Mg2+ facilitated by a highly flexible structure, mainly owing to a network of di-hydrogen bonds, N-Hδ+-δH-B and the versatile coordination of the BH4- ligand. DFT shows that di-hydrogen bonds in inorganic matter and hydrogen bonds in bio-materials have similar bond strengths and bond lengths. As a result of the high structural flexibiliy, the Mg-ion conductivity is dramatically improved at moderate temperature, e.g. σ(Mg2+) = 3.3 × 10-4 S cm-1 at T = 80 °C for Mg(BH4)2·NH3, which is approximately 8 orders of magnitude higher than that of Mg(BH4)2. Our results may inspire a new approach for the design and discovery of unprecedented multivalent ion conductors.

Interface-enhanced Li ion conduction in a LiBH4-SiO2 solid electrolyte.

We have developed a fast solid state Li ion conductor composed of LiBH4 and SiO2 by means of interface engineering. A composite of LiBH4-SiO2 was simply synthesized by high energy ball-milling, and two types of SiO2 (MCM-41 and fumed silica) having different specific surface areas were used to evaluate the effect of the LiBH4/SiO2 interface on the ionic conductivity enhancement. The ionic conductivity of the ball-milled LiBH4-MCM-41 and LiBH4-fumed silica mixture is as high as 10(-5) S cm(-1) and 10(-4) S cm(-1) at room temperature, respectively. In particular, the conductivity of the latter is comparable to the LiBH4 melt-infiltrated into MCM-41. The conductivities of the LiBH4-fumed silica mixtures at different mixing ratios were analyzed employing a continuum percolation model, and the conductivity of the LiBH4/SiO2 interface layer is estimated to be 10(5) times higher than that of pure bulk LiBH4. The result highlights the importance of the interface and indicates that significant enhancement in ionic conductivity can be achieved via interface engineering.

Trends in Syntheses, Structures, and Properties for Three Series of Ammine Rare-Earth Metal Borohydrides, M(BH4)3·nNH3 (M = Y, Gd, and Dy).

Fourteen solvent- and halide-free ammine rare-earth metal borohydrides M(BH4)3·nNH3, M = Y, Gd, Dy, n = 7, 6, 5, 4, 2, and 1, have been synthesized by a new approach, and their structures as well as chemical and physical properties are characterized. Extensive series of coordination complexes with systematic variation in the number of ligands are presented, as prepared by combined mechanochemistry, solvent-based methods, solid-gas reactions, and thermal treatment. This new synthesis approach may have a significant impact within inorganic coordination chemistry. Halide-free metal borohydrides have been synthesized by solvent-based metathesis reactions of LiBH4 and MCl3 (3:1), followed by reactions of M(BH4)3 with an excess of NH3 gas, yielding M(BH4)3·7NH3 (M = Y, Gd, and Dy). Crystal structure models for M(BH4)3·nNH3 are derived from a combination of powder X-ray diffraction (PXD), (11)B magic-angle spinning NMR, and density functional theory (DFT) calculations. The structures vary from two-dimensional layers (n = 1), one-dimensional chains (n = 2), molecular compounds (n = 4 and 5), to contain complex ions (n = 6 and 7). NH3 coordinates to the metal in all compounds, while BH4(-) has a flexible coordination, i.e., either as a terminal or bridging ligand or as a counterion. M(BH4)3·7NH3 releases ammonia stepwise by thermal treatment producing M(BH4)3·nNH3 (6, 5, and 4), whereas hydrogen is released for n ≤ 4. Detailed analysis of the dihydrogen bonds reveals new insight about the hydrogen elimination mechanism, which contradicts current hypotheses. Overall, the present work provides new general knowledge toward rational materials design and preparation along with limitations of PXD and DFT for analysis of structures with a significant degree of dynamics in the structures.

Borohydride and halide dual-substituted lithium argyrodites.

Solid electrolyte is a crucial component of all-solid-state batteries, with sulphide solid electrolytes such as lithium argyrodite being closest to commercialization due to their high ionic conductivity and formability. In this study, borohydride/halide dual-substituted argyrodite-type electrolytes, Li7-α-ßPS6-α-ß(BH4)αXß (X = Cl, Br, I; α + ß ≤ 1.8), have been synthesized using a two-step ball-milling method without post-annealing. Among the various compositions, Li5.35PS4.35(BH4)1.15Cl0.5 exhibits the highest ionic conductivity of 16.4 mS cm-1 at 25 °C when cold-pressed, which further improves to 26.1 mS cm-1 after low temperature sintering. The enhanced conductivity can be attributed to the increased number of Li vacancies resulting from increased BH4 and halide occupancy and site disorder. Li symmetric cells with Li5.35PS4.35(BH4)1.15Cl0.5 demonstrate stable Li plating and stripping cycling for over 2,000 hours at 1 mA cm-2, along with a high critical current density of 2.1 mA cm-2. An all-solid-state battery prepared using Li5.35PS4.35(BH4)1.15Cl0.5 as the electrolyte and pure Li as the anode exhibits an initial coulombic efficiency of 86.4%. Although these electrolytes have limited thermal stability, it shows a wide compositional range while maintaining high ionic conductivity.

Microstructural analysis of dehydrogenation products of the Ca(BH4)2-MgH2 composite.

The microstructural analysis of the dehydrogenation products of the Ca(BH4)2-MgH2 composite was performed using transmission electron microscopy. It was found that nanocrystalline CaB6 crystallites formed as a dehydrogenation product throughout the areas where the signals of Ca and Mg were simultaneously detected, in addition to relatively coarse Mg crystallites. The uniform distribution of the nanocrystalline CaB6 crystallites appears to play a key role in the rehydrogenation of the dehydrogenation products, which implies that microstructure is a crucial factor determining the reversibility of reactive hydride composites.

Lithium Superionic Conduction in BH4 -Substituted Thiophosphate Solid Electrolytes.

Compared with conventional liquid electrolytes, solid electrolytes can better improve the safety properties and achieve high-energy-density Li-ion batteries. Sulfide-based solid electrolytes have attracted significant attention owing to their high ionic conductivities, which are comparable to those of their liquid counterparts. Among them, Li thiophosphates, including Li-argyrodites, are widely studied. In this study, Li thiophosphate solid electrolytes containing BH4 - anions are prepared via a simple and fast milling method even without heat treatment. The synthesized materials exhibit a high ionic conductivity of up to 11 mS cm-1 at 25 °C, which is much higher than reported values. To elucidate the mechanism behind, the thiophosphate local structure, whose effect on the ionic conductivity remains unclear to date, is investigated. Raman and solid-state NMR spectroscopies are performed to identify the thiophosphate local structure in the sulfide samples. Based on the analysis results, the ratios of the different thiophosphate units in the prepared electrolyte samples are determined. It is found that the thiophosphate local structure can be varied by changing the amount of LiBH4 and the milling conditions, which significantly impact the ionic conductivity. The all-solid-state cell with the prepared solid electrolyte exhibits superior cycle and rate performances.

Microscopic origin of universal quasilinear band structures of transparent conducting oxides.

A tight-binding-based microscopic theory is developed that accounts for quasilinear conduction bands appearing commonly in transparent conducting oxides. It is found that the interaction between oxygen p and metal s orbtials plays a critical role in determining the band structure around the conduction-band minimum. Under certain types of short-range orders, the tight-binding model universally leads to a dispersion relation which corresponds to that of the massive Dirac particle. The impact of the graphenelike band structure is demonstrated by evaluating the electron mobility of highly doped n-type ZnO.

Flexible Pyroresistive Graphene Composites for Artificial Thermosensation Differentiating Materials and Solvent Types.

When we touch an object, thermosensation allows us to perceive not only the temperature but also wetness and types of materials with different thermophysical properties (i.e., thermal conductivity and heat capacity) of objects. Emulation of such sensory abilities is important in robots, wearables, and haptic interfaces, but it is challenging because they are not directly perceptible sensations but rather learned abilities via sensory experiences. Emulating the thermosensation of human skin, we introduce an artificial thermosensation based on an intelligent thermo-/calorimeter (TCM) that can objectively differentiate types of contact materials and solvents with different thermophysical properties. We demonstrate a TCM based on pyroresistive composites with ultrahigh sensitivity (11.2% °C-1) and high accuracy (<0.1 °C) by precisely controlling the melt-induced volume expansion of a semicrystalline polymer, as well as the negative temperature coefficient of reduced graphene oxide. In addition, the ultrathin TCM with coplanar electrode design shows deformation-insensitive temperature sensing, facilitating wearable skin temperature monitoring with accuracy higher than a commercial thermometer. Moreover, the TCM with a high pyroresistivity can objectively differentiate types of contact materials and solvents with different thermophysical properties. In a proof-of-principle application, our intelligent TCM, coupled with a machine-learning algorithm, enables objective evaluation of the thermal attributes (coolness and wetness) of skincare products.

Bioinspired Gradient Conductivity and Stiffness for Ultrasensitive Electronic Skins.

Hierarchical and gradient structures in biological systems with special mechanical properties have inspired innovations in materials design for construction and mechanical applications. Analogous to the control of stress transfer in gradient mechanical structures, the control of electron transfer in gradient electrical structures should enable the development of high-performance electronics. This paper demonstrates a high performance electronic skin (e-skin) via the simultaneous control of tactile stress transfer to an active sensing area and the corresponding electrical current through the gradient structures. The flexible e-skin sensor has extraordinarily high piezoresistive sensitivity at low power and linearity over a broad pressure range based on the conductivity-gradient multilayer on the stiffness-gradient interlocked microdome geometry. While stiffness-gradient interlocked microdome structures allow the efficient transfer and localization of applied stress to the sensing area, the multilayered structure with gradient conductivity enables the efficient regulation of piezoresistance in response to applied pressure by gradual activation of current pathways from outer to inner layers, resulting in a pressure sensitivity of 3.8 × 105 kPa-1 with linear response over a wide range of up to 100 kPa. In addition, the sensor indicated a rapid response time of 0.016 ms, a low minimum detectable pressure level of 0.025 Pa, a low operating voltage (100 µV), and high durability during 8000 repetitive cycles of pressure application (80 kPa). The high performance of the e-skin sensor enables acoustic wave detection, differentiation of gas characterized by different densities, subtle tactile manipulation of objects, and real-time monitoring of pulse pressure waveform.

Design of V-Substituted TiFe-Based Alloy for Target Pressure Range and Easy Activation.

Titanium iron (TiFe) alloy is a room-temperature hydrogen-storage material, and it absorbs hydrogen via a two-step process to form TiFeH and then TiFeH2. The effect of V addition in TiFe alloy was recently elucidated. The V substitution for Ti sublattice lowers P2/P1 ratio, where P1 and P2 are the equilibrium plateau pressure for TiFe/TiFeH and TiFeH/TiFeH2, respectively, and thus restricts the two-step hydrogenation within a narrow pressure range. The focus of the present investigation was to optimize the V content such that maximum usable storage capacity can be achieved for the target pressure range: 1 MPa for absorption and 0.1 MPa for desorption. The effect of V substitution at selective Ti or Fe sublattices was closely analyzed, and the alloy composition Ti46Fe47.5V6.5 displayed the best performance with ca. 1.5 wt.% of usable capacity within the target pressure range. At the same time, another issue in TiFe-based alloys, which is a difficulty in activation at room temperature, was solved by Ce addition. It was shown that 3 wt.% Ce dispersion in TiFe alloy imparted to it easy room-temperature (RT) activation properties.

Effects of Dangguixu-san in patients with acute lateral ankle sprain: a randomized controlled trial.

BACKGROUND: Dangguixu-san (DS), a herbal extract, is widely used in Korean medicine to treat pain and swelling caused by ankle sprain. However, there is insufficient evidence regarding the effects of DS on ankle sprains. Accordingly, we assessed the efficacy and safety of DS for the treatment of acute lateral ankle sprain (ALAS). METHODS: This study was a multicenter (two Korean hospitals), randomized, double-blind, placebo-controlled, parallel-arm clinical trial with a 1:1 allocation ratio that included a per-protocol analysis and sub-analysis based on symptom severity. Forty-eight participants (n = 28 at Semyung University Korean Medicine Hospital in Chungju; n = 20 at DongShin University Gwangju Korean Medicine Hospital) with grade I or II ALAS that occurred within 72 h before enrollment were randomized to a DS (n = 24) or placebo (n = 24) group. Both groups received acupuncture treatment once daily for 5 consecutive days and the trial medication (DS/placebo capsule) three times a day for 7 consecutive days. Primary (visual analog scale [VAS] scores for pain) and secondary (Foot and Ankle Outcome Scores [FAOS], edema, and European Quality of Life Five-Dimension-Five-Level Scale [EQ-5D-5L] scores) outcome measures were recorded at baseline (week 0), the end of the intervention (week 1), and 4 weeks after treatment completion (week 5). RESULTS: Forty-six participants completed the trial (n = 23 each). Changes in VAS scores, FAOS Symptom/Rigidity, and FAOS Ache from week 1 to week 5 showed significant differences between the two groups. Sub-analyses showed significant differences in changes of FAOS Ache (week 0 to week 5) and VAS scores, total FAOS, and EQ-5D-5L scores (week 1 to week 5) between the two subgroups (grade II). There were no adverse events and significant negative changes in clinical laboratory parameters in both groups. CONCLUSIONS: Overall, the results of this study are in favor of DS combined with acupuncture and suggest that DS combined with acupuncture is a safe treatment with positive long-term effects in terms of pain reduction and symptom alleviation in patients with grade I or II ALAS. TRIAL REGISTRATION: Clinical Research Information Service KCT0002374 . Registered on July 11, 2017; retrospectively registered.

Spin channels in functionalized graphene nanoribbons.

We characterize the transport properties of functionalized graphene nanoribbons using extensive first-principles calculations based on density functional theory (DFT) that encompass both monovalent and divalent ligands, hydrogenated defects, and vacancies. We find that the edge metallic states are preserved under a variety of chemical environments, while bulk conducting channels can be easily destroyed by either hydrogenation or ion or electron beams, resulting in devices that can exhibit spin conductance polarization close to unity.