RESUMO
Crystallizing molecules with long flexible chains is a challenge, making it difficult to perform X-ray crystallography. Chaperones can assist in the crystallization of compounds that do not crystallize by themselves by producing solvate crystals that contain the analyte in their three-dimensional lattices. Among the most versatile chaperones for liquid analytes are tetraaryladamantanes (TAAs), but the size of the compounds that can be encapsulated is limited, and attempts to surpass this limit with known TAAs were unsuccessful. Here we report that 1,3,5,7-tetrakis(2-fluoro-4-methoxyphenyl)adamantane (TFM) is a crystallization chaperone for acyclic molecules up to the molecular weight of phytyl acetate (338â g/mol). Encapsulation of such a large acyclic compound was achieved when the analyte was esterified and when a two-step temperature protocol was used for crystallization. Exploratory work indicates that a drop to -20 °C allows for encapsulation of squalene (Mr 411â g/mol), albeit with positional disorder of the analyte. Our X-ray crystal structures of solvates with flexible analytes shed light on how crystalline order can be imposed on large acyclic analytes. The new, fluorinated TAA gives access to crystal structures that were inaccessible thus far.
RESUMO
Molecular emitters that combine circularly polarized luminescence (CPL) and high radiative rate constants of the triplet exciton decay are highly attractive for electroluminescent devices (OLEDs) or next-generation photonic applications, such as spintronics, quantum computing, cryptography, or sensors. However, the design of such emitters is a major challenge because the criteria for enhancing these two properties are mutually exclusive. In this contribution, we show that enantiomerically pure {Cu(CbzR)[(S/R)-BINAP]} [R = H (1), 3,6-tBu (2)] are efficient thermally activated delayed fluorescence (TADF) emitters with high radiative rate constants of kTADF up to 3.1 × 105 s-1 from 1/3LLCT states according to our temperature-dependent time-resolved luminescence studies. The efficiency of the TADF process and emission wavelengths are highly sensitive to environmental hydrogen bonding of the ligands, which can be disrupted by grinding of the crystalline materials. The origin of this pronounced mechano-stimulus photophysical behavior is a thermal equilibrium between the 1/3LLCT states and a 3LC state of the BINAP ligand, which depends on the relative energetic order of the excited states and is prone to inter-ligand C-H···π interactions. The copper(I) complexes are also efficient CPL emitters displaying exceptional dissymmetry values glum of up to ±0.6 × 10-2 in THF solution and ±2.1 × 10-2 in the solid state. Importantly for application in electroluminescence devices, the C-H···π interactions can also be disrupted by employing sterically bulky matrices. Accordingly, we have investigated various matrix materials for successful implementation of the chiral copper(I) TADF emitters in proof-of-concept CP-OLEDs.
RESUMO
A series of chiral mechanochromic copper(I) cAAC (cAAC=cyclic (alkyl)(amino)carbene) complexes with a variety of amide ligands have been studied with regard to their photophysical and chiroptical properties to elucidate structure-property relationships for the design of efficient triplet exciton emitters exhibiting circularly polarized luminescence. Depending on the environment, which determines the excited state energies, either thermally activated delayed fluorescence (TADF) from 1/3 LLCT states or phosphorescence from 3 LLCT/LC states occurs. However, neither chiral moieties at the carbene nor at the carbazolate ligands provide detectable luminescence dissymmetries glum . An exception is [Cu(phenoxazinyl)(cAAC)], showing orange to deep red TADF with λmax =601-715â nm in solution, powders and in PMMA. In this case, the amide ligand can undergo distortions in the excited state. This design motif leads to the first linear, non-aggregated CPL-active copper(I) complex with glum of -3.4 â 10-3 combined with a high radiative rate constant of 6.7 â 105 â s-1 .
RESUMO
The 2-aryl-3,4,5,6-tetraphenyl-1,2-azaborinines 1-EMe3 and 2-EMe3 (E=Si, Sn; aryl=Ph (1), Mes (=2,4,6-trimethylphenyl, 2)) were synthesized by ring-expansion of borole precursors with N3 EMe3 -derived nitrenes. Desilylative hydrolysis of 1- and 2-SiMe3 yielded the corresponding N-protonated azaborinines, which were deprotonated with nBuLi or MN(SiMe3 )2 (M=Na, K) to the corresponding group 1 salts, 1-M and 2-M. While the lithium salts crystallized as monomeric Lewis base adducts, the potassium salts formed coordination polymers or oligomers via intramolecular Kâ â â aryl π interactions. The reaction of 1-M or 2-M with CO2 yielded N-carboxylate salts, which were derivatized by salt metathesis to methyl and silyl esters. Salt metathesis of 1-M or 2-M with methyl triflate, [Cp*BeCl] (Cp*=C5 Me5 ), BBr2 Ar (Ar=Ph, Mes, 2-thienyl), ECl3 (E=B, Al, Ga) and PX3 (X=Cl, Br) afforded the respective group 2, 13 and 15 1,2-azaborinin-2-yl complexes. Salt metathesis of 1-K with BBr3 resulted not only in N-borylation but also Ph-Br exchange between the endocyclic and exocyclic boron atoms. Solution 11 Bâ NMR data suggest that the 1,2-azaborinin-2-yl ligand is similarly electron-withdrawing to a bromide. In the solid state the endocyclic bond length alternation and the twisting of the C4 BN ring increase with the sterics of the substituents at the boron and nitrogen atoms, respectively. Regression analyses revealed that the downfield shift of the endocyclic 11 Bâ NMR resonances is linearly correlated to both the degree of twisting of the C4 BN ring and the tilt angle of the N-substituent. Calculations indicate that the 1,2-azaborinin-1-yl ligand has no sizeable π-donor ability and that the aromaticity of the ring can be subtly tuned by the electronics of the N-substituent.
RESUMO
Cyclopentadienyls are well-known strong donor ligands and have been successfully employed in catalysis as they tolerate a variety of substituents to adjust their steric and electronic properties. Although such highly modifiable ligands are of great interest for luminescence and photocatalytic applications, studies of CpR-containing photoactive transition-metal complexes are quite rare. In this work, we present a structural, electrochemical, and first elaborated photophysical investigation of a series of copper(I) half-sandwich complexes bearing cyclic alkyl(amino)carbenes (CAACs) as chromophore ligands and compare them with [Cu(Cp)(IDipp)] and [Cu(Cp*)(IDipp)] bearing a traditional N-heterocyclic carbene. Furthermore, we present the first molecular structure derived from single-crystal X-ray diffraction of a copper(I) indenyl complex, which can be described as an η2 (σ, π)-coordination. The CuI half-sandwich complexes show blue-green to orange phosphorescence with a photoluminescence quantum yield of up to 59% and radiative rate constants kr of up to 4 × 104 s-1 in the solid state, depending on the substitution pattern of the CpR ligand. Our TD/DFT calculations suggest that the emitting excited states are of 3MLCT/LLCT character. We determined the excited-state lifetime of the CuI half-sandwich complexes in solution to be as long as 600 ns, which in combination with the large π-surface of the CpR ligands allows for Dexter energy transfer for photocatalytic applications. In addition, the chiroptical properties of chiral [Cu(Cp/Cp*)(CAACMenthone)] were studied and compared to [CuCl(CAACMenthone)], of which we demonstrate that its circular polarized luminescence is the result of excimer formation and not, as previously reported, attributed to the monomeric C1-symmetric structure.
RESUMO
The concepts of aromaticity and antiaromaticity have a long history, and countless demonstrations of these phenomena have been made with molecules based on elements from the p, d, and f blocks of the periodic table. In contrast, the limited oxidation-state flexibility of the s-block metals has long stood in the way of their participation in sophisticated π-bonding arrangements, and truly antiaromatic systems containing s-block metals are altogether absent or remain poorly defined. Using spectroscopic, structural, and computational techniques, we present herein the synthesis and authentication of a heterocyclic compound containing the alkaline earth metal beryllium that exhibits significant antiaromaticity, and detail its chemical reduction and Lewis-base-coordination chemistry.
RESUMO
A series of bis(σ)-borane complexes of Groupâ 6 transition metals were prepared by direct dihydroborane coordination to the metal center. Reaction of [M(CO)3 (PCy3 )2 ] and two dihydroboranes [DurBH2 ] and [(Me3 Si)2 NBH2 ] (Dur=2,3,5,6-Me4 C6 H) yielded bis(σ)-borane complexes fac-[M(CO)3 (PCy3 ){η2 -(H2 BR)}] (R=Dur; 1: M=Cr, 2: M=W; R=N(SiMe3 )2 ; 3: M=Cr, 4: M=W). In the case of molybdenum, we have isolated an arene complex (5) with [DurBH2 ] in which the Dur group acts as a η6 -bound ligand, and with [(Me3 Si)2 NBH2 ] a similar bis(σ)-borane complex was isolated, cis,trans-[Mo(CO)2 (PCy3 )2 {η2 -(H2 BN(SiMe3 )2 }] (6), with a different pattern of auxiliary ligands. The complexes were investigated by multinuclear NMR spectroscopy, mass spectrometry, X-ray diffraction analysis, and computational methods. Quantum theory of atoms in molecules (QTAIM) calculations demonstrated that the borane complexes may be described as pure bis(σ)-borane complexes rather than elongated or stretched examples given that the calculations do not show the presence of a ring-critical point (RCP) at the ring formed by the interactions of the B-H with metal center.
RESUMO
The steric and electronic properties of aryl substituents in monoaryl borohydrides (Li[ArBH3 ]) and dihydroboranes were systematically varied and their reactions with [Ru(PCy3 )2 HCl(H2 )] (Cy: cyclohexyl) were studied, resulting in bis(σ)-borane or terminal borylene complexes of ruthenium. These variations allowed for the investigation of the factors involved in the activation of dihydroboranes in the synthesis of terminal borylene complexes. The complexes were studied by multinuclear NMR spectroscopy, mass spectrometry, X-ray diffraction analysis, and density functional theory (DFT) calculations. The experimental and computational results suggest that the ortho-substitution of the aryl groups is necessary for the formation of terminal borylene complexes.
RESUMO
The reactivity of a diruthenium tetrahydride complex towards three selected dihydroboranes was investigated. The use of [DurBH2 ] (Dur=2,3,5,6-Me4 C6 H) and [(Me3 Si)2 NBH2 ] led to the formation of bridging borylene complexes of the form [(Cp*RuH)2 BR] (Cp*=C5 Me5 ; 1 a: R=Dur; 1 b: R=N(SiMe3 )2 ) through oxidative addition of the B-H bonds with concomitant hydrogen liberation. Employing the more electron-deficient dihydroborane [3,5-(CF3 )2 -C6 H3 BH2 ] led to the formation of an anionic complex bearing a tetraarylated chain of four boron atoms, namely Li(THF)4 [(Cp*Ru)2 B4 H5 (3,5-(CF3 )2 C6 H3 )4 ] (4), through an unusual, incomplete threefold dehydrocoupling process. A comparative theoretical investigation of the bonding in a simplified model of 4 and the analogous complex nido-[1,2(Cp*Ru)2 (µ-H)B4 H9 ] (I) indicates that there appear to be no classical σ-bonds between the boron atoms in complex I, whereas in the case of 4 the B4 chain better resembles a network of three B-B σ bonds, the central bond being significantly weaker than the other two.
RESUMO
A range of mono- and bis-adducts of beryllium dichloride with cyclic (alkyl)(amino)carbenes (CAAC), cyclic diamidocarbene (DAC), and carbodiphosphorane (CDP) are prepared, and their reactions with nucleophiles are studied. Salt elimination with Yamashita and Nozaki's lithium diazaborolide reagent led to the isolation of an unsymmetrical beryllium diazaborolyl complex and a base-stabilized diazaborolyl beryllium chloride. From structural and spectroscopic analyses, the Be-B bonding in these compounds was determined to be polar covalent in character. In addition, the nucleophilic addition of magnesium anthracenediyl to one of the adducts resulted in the isolation of an interesting tetracyclic beryllium-bridged molecule.
RESUMO
A new pathway for the ring expansion reaction of antiaromatic boroles with organic azides is reported. While the reaction usually leads to 1,2-azaborinines, it was diverted to the formation of a 1,2,3-diazaborinine by changing the electronic characteristics of the reagents. The isolable azo-azaborinine intermediate initially formed from the reaction of 1-(2,3,4,5-tetraphenylborolyl)ferrocene with 4-azido-N,N-dimethylaniline gradually decomposed to a 1,2,3-diazaborinine and benzonitrile. Both the spectroscopic properties and the reactivity of the heteroaromatic compound show analogies to pyridine, to which it is isoelectronic. Density functional theory (DFT) calculations provided insight into the mechanism of this unusual transformation.
RESUMO
The reaction of a pentamethylcyclopentadienyl-substituted dialane with a variety of Lewis bases results in unexpected disproportionation of the dialane into AlI and AlIII species. Use of a transition-metal Lewis base allows for the formation of metal-only Lewis pairs. Furthermore, the synthesis of a Lewis base bis-adduct was successful with the Lewis base 4-dimethylaminopyridine.
RESUMO
A series of NHC-supported 1,2-dithienyldiborenes was synthesized from the corresponding (dihalo)thienylborane NHC precursors. NMR and UV/Vis spectroscopic data, as well as X-ray crystallographic analyses, were used to assess the electronic and steric influences on the B=B double bond of various NHCs and electron-donating substituents on the thienyl ligands. Crystallographic data showed that the degree of coplanarity of the diborene core and thienyl groups is highly dependent on the sterics of the substituents. Furthermore, any increase in the electron-donating ability of the substituents resulted in the destabilization of the HOMO and greater instability of the resulting diborenes.
RESUMO
Boroles are important motifs within functional materials. With the aim to prepare a pinacolboryl-substituted derivative, the metallacycle transfer from corresponding zirconium and tin precursors has been explored. We show that the reaction of 1,1-dimethyl-2,3,4,5-tetrapinacolborylstannole with dichloro(phenyl)borane does not provide the desired borole, but instead a stannyl-substituted 1-chloroboracyclopent-3-ene. Spectroscopic and structural details of this highly functionalized boracycle indicate that intramolecular interactions between the tin and oxygen atoms of the boryl substituents may account for the unexpected outcome of the tin-boron exchange reaction.
RESUMO
Herein, we report on the synthesis and structural characterization of a series of trigonal and tetrahedral cationic copper(I) complexes, bearing phosphine or N-heterocyclic carbene ligands as donors, with benzthiazol-2-pyridine (pybt) and benzthiazol-2-quinoline (qybt) acting as π-chromophores. The compounds are highly colored due to their 1MLCT (MLCT = metal-to-ligand charge transfer) states absorbing between ca. λabs = 400-500 nm, with 1ILCT (ILCT = intraligand charge transfer) states in the UV region. The relative shifts of the S0âS1 absorption correlate with the computed highest occupied molecular orbital-lowest unoccupied molecular orbital gaps, the qybt complexes generally being lower in energy than the pybt ones due to the larger conjugation of the quinoline-based ligand. The compounds exhibit, for CuI complexes, rare intense long-lived near-IR emission with λmax ranging from 593 to 757 nm, quantum yields of up to Φ = 0.11, and lifetimes τ of several microseconds in the solid state as well as in poly(methyl methacrylate) films. Although a bathochromic shift of the emission is observed with λmax ranging from 639 to 812 nm and the lifetimes are greatly increased at 77 K, no clear indication for thermally activated delayed fluorescence was found, leaving us to assign the emission to originate from a 3(Cuâpybt/qybt)MLCT state. The red to near-IR emission is a result of incorporation of the sulfur into the chromophore ligand, as related nitrogen analogues emit in the green to orange region of the electromagnetic spectrum. The photophysical results and conclusions have further been corroborated with density functional theory (DFT)/time-dependent DFT calculations, confirming the nature of the excited states and also the trends of the redox potentials.
RESUMO
C(sp3) atoms are known to act as electrophilic sites in self-assembly processes, and in all cases reported till now, they form only one interaction with nucleophiles; that is, they function as monodentate tetrel bond donors. This manuscript reports experimental (X-ray structural analysis) and theoretical evidence (DFT calculations), proving that the methylene carbon in bis-pyridinium methylene salts establishes two short and directional C(sp3)···anion interactions; that is, they function as bidentate tetrel bond donors.
RESUMO
The classical route to the PMe3-stabilised polycyclic aromatic hydrocarbon (PAH)-substituted diborenes B2Ar2(PMe3)2 (Ar = 9-phenanthryl 7-Phen; Ar = 1-pyrenyl 7-Pyr) via the corresponding 1,2-diaryl-1,2-dimethoxydiborane(4) precursors, B2Ar2(OMe)2, is marred by the systematic decomposition of the latter to BAr(OMe)2 during reaction workup. Calculations suggest this results from the absence of a second ortho-substituent on the boron-bound aryl rings, which enables their free rotation and exposes the B-B bond to nucleophilic attack. 7-Phen and 7-Pyr are obtained by the reduction of the corresponding 1,2-diaryl-1,2-dichlorodiborane precursors, B2Ar2Cl2(PMe3)2, obtained from the SMe2 adducts, which are synthesised by direct NMe2-Cl exchange at B2Ar2(NMe2)2 with (Me2S)BCl3. The low-lying π* molecular orbitals (MOs) located on the PAH substituents of 7-Phen and 7-Pyr intercalate between the B-B-based π and π* MOs, leading to a relatively small HOMO-LUMO gap of 3.20 and 2.72 eV, respectively. Under vacuum or at high temperature 7-Phen and 7-Pyr undergo intramolecular hydroarylation of the B[double bond, length as m-dash]B bond to yield 1,2-dihydronaphtho[1,8-cd][1,2]diborole derivatives. Hydrogenation of 7-Phen, 7-Pyr and their 9-anthryl and mesityl analogues III and II, respectively, results in all cases in splitting of the B-B bond and isolation of the monoboranes (Me3P)BArH2. NMR-spectroscopic monitoring of the reactions, solid-state structures of isolated reaction intermediates and computational mechanistic analyses show that the hydrogenation of the three PAH-substituted diborenes proceeds via a different pathway to that of the dimesityldiborene. Rather than occurring exclusively at the B-B bond, hydrogenation of 7-Ar and III proceeds via a hydroarylated intermediate, which undergoes one B-B bond-centered H2 addition, followed by hydrogenation of the endocyclic B-C bond resulting from hydroarylation, making the latter effectively reversible.
RESUMO
A series of boranediyl-bridged diplatinum A-frame complexes, [Pt2X2(µ-BY)(µ-dmpm)2] (X = Cl, Br, I; Y = aryl, alkyl, amino, halo; dmpm = bis(dimethylphosphino)methane), were synthesised by the twofold oxidative addition of BX2Y to [Pt2(nbe)2(µ-dmpm)2] (nbe = norbornene) or to the paddlewheel complex [Pt2(µ-dmpm)3]. Similarly, the addition of B2X2(NMe2)2 (X = Cl, Br) to [Pt2(nbe)2(µ-dmpm)2] provided access to the diborane-1,2-diyl-bridged A-frame complexes [Pt2X2(µ-1,2-B2(NMe2)2)(µ-dmpm)2]. X-ray crystallographic studies of these (BY)n-bridged complexes show structural trends depending on the steric demands of Y and the nature of X. Analysis of higher-order 31P NMR satellites provided information on JP-Pt and JPt-Pt coupling constants, the latter correlating with the PtPt distance. All (di)boranediyl complexes also proved unstable towards (successive) loss of the bridging "BY" unit(s), resulting in the formation of [Pt2X2(µ-dmpm)2].
RESUMO
Aside from simple Lewis acid-base chemistry, the reaction chemistry of aluminacyclopentadienes, which are commonly referred to as aluminoles or simply alumoles, remains relatively underdeveloped. To date, few attempts to extend their inherent insertion and cycloaddition reactivity to the construction of stable aluminum-containing heterocycles have been reported. Herein, we demonstrate the selective ring expansion of a cyclopentadienyl-substituted alumole with a series of organic azides to form unsaturated six-membered AlN heterocycles. Depending on the substituent on the azide, the reaction proceeds either with or without loss of dinitrogen, leading to incorporation of only the "NR" unit of the azide or the entire azo substituent into the periphery of the heterocycle. A deeper understanding of these ring expansion reactions is reached through computational studies, illustrating deviations in the mechanism as a function of the organic azide employed.
RESUMO
A carbene-stabilised neutral boryl radical and a boryl anion are isolated via selective one- and two-electron reduction of a diamidocarbene (DAC) adduct of dibromo(pentafluorophenyl)borane. Both the radical and the anion have been characterised by various spectroscopic techniques in solution, while the structures have been ascertained by single-crystal X-ray diffraction. In contrast, the reduction of the analogous cyclic (alkyl)(amino) carbene (CAAC) adduct yields a C-H activation product.