RESUMO
The feasibility of low frequency pure tone generation in the inner ear by laser-induced nonlinear optoacoustic effect at the round window was demonstrated in three human cadaveric temporal bones (TB) using an integral pulse density modulation (IPDM). Nanosecond laser pulses with a wavelength in the near-infrared (NIR) region were delivered to the round window niche by an optical fiber with two spherical lenses glued to the end and a viscous gel at the site of the laser focus. Using IPDM, acoustic tones with frequencies between 20 Hz and 1 kHz were generated in the inner ear. The sound pressures in scala tympani and vestibuli were recorded and the intracochlear pressure difference (ICPD) was used to calculate the equivalent sound pressure level (eq. dB SPL) as an equivalent for perceived loudness. The results demonstrate that the optoacoustic effect produced sound pressure levels ranging from 140 eq. dB SPL at low frequencies ≤ 200 Hz to 90 eq. dB SPL at 1 kHz. Therefore, the produced sound pressure level is potentially sufficient for patients requiring acoustic low frequency stimulation. Hence, the presented method offers a potentially viable solution in the future to provide the acoustic stimulus component in combined electro-acoustic stimulation with a cochlear implant.
Assuntos
Janela da Cóclea , Som , Humanos , Estimulação Acústica , Janela da Cóclea/fisiologia , Rampa do Tímpano/fisiologia , Lasers , Cóclea/fisiologiaRESUMO
The aim of this work is to generate defined tones that cover the human hearing range in aqueous media for a later application in middle or inner ear implants. In our experiments, we investigated the characteristics of single laser pulses and pulse trains with different laser repetition rates of nanosecond laser pulses that were focused into aqueous media in a small volume. The frequency of the generated tones was limited by the spectral properties of the single acoustic pulses, which depended on the medium. Tones with fundamental frequencies above 8 kHz were generated using laser pulses focused into water. By replacing water with gel, tones between 500 Hz and 20 kHz could be produced. The generation of tones in the low-frequency range was only possible when laser pulse trains with pulse density modulated pulse patterns were applied in gel. This enabled the generation of tones between 20 Hz and 2 kHz. Consequently, the combination of different pulse patterns for the different frequency ranges allows generating optoacoustic tones between 20 Hz and 20 kHz in gel. Thus, we can cover the complete range of human hearing through optoacoustically generated tones.