Design, Exploitation, and Rational Improvements of Diazirine-Based Universal Polymer Crosslinkers.

ConspectusAddition of new covalent bonds between the chains of thermoplastic polymers (i.e., crosslinking) provides improved mechanical strength and enhanced high-temperature performance while also providing an effective strategy for photopatterning. Traditionally, however, crosslinking of each polymer substrate has required the use of a specific crosslinking technology (hydrosilylation for PDMS, vulcanization for rubber, etc.). The lack of a general solution to the challenge of polymer crosslinking means that there are many thermoplastics (e.g., polypropylene or polyhydroxyalkanoates) that have desirable properties, but which cannot be upgraded by traditional crosslinking technologies.Our lab developed the first universal crosslinkers for aliphatic polymers by leveraging trifluoromethyl aryl diazirine motifs, functional groups that have been widely used in chemical biology for >30 years, but which have seldom been exploited in materials science. These novel reagents work (via C-H insertion) on essentially any commodity polymer that contains aliphatic C-H bonds, including industrial plastics like polypropylene (the crosslinking of which has been an outstanding challenge in the field for >50 years), as well as commercially important elastomers (e.g., polydimethylsiloxane), biodegradable polymers (e.g., polycaprolactone), and green polymer materials derived from biomass (e.g., polyhydroxyalkanoates).Subsequent structure-function work from our group led to crosslinkers that were >10-fold more effective in undergoing C-H insertion with aliphatic substrates. We then developed an improved synthesis of our electronically optimized diazirines and incorporated them into a family of cleavable crosslinker reagents, which permit the on-demand generation of reprocessable thermosets. At the same time, other groups replaced the perfluoropropyl linker in our first-generation crosslinker with a series of dynamic linkages; these permit the ready generation of vitrimeric materials and can be used in the reactive compatibilization of immiscible plastic waste.Since the publication of our initial Science paper in 2019, this burgeoning field of diazirine-based polymer crosslinkers has experienced an explosion of interest. Publications from our lab and others have described the use of these reagents in covalent adhesion, photopatterning of low dielectric materials for microelectronics, and direct optical printing of quantum dots. Our crosslinkers have also been shown to heighten the robustness of ice-phobic coatings and improve the performance of woven ballistic fabric, while─perhaps most unexpectedly─substantially improving the stability of high-performance perovskite solar cells. Electronically optimized diazirines can also be used to covalently link proteins to polymer surfaces, suggesting a broad range of applications in the biocompatibilization of medical devices. This Account will summarize the development of trifluoromethyl aryl diazirine reagents for materials science over the past 5 years. A brief comparison will also be made, in the Summary and Outlook section at the end of the Account, to competing (and often complementary) reagents based upon azide and diazoalkyl motifs. Finally, we have compiled a Frequently Asked Questions list that covers many practical aspects of crosslinker design and application; this is appended as Supporting Information.

Electron-Poor Butenolides: The Missing Link between Acrylates and Maleic Anhydride in Radical Polymerization.

Butenolides are a class of 5-membered lactones that hold great potential as bio-based monomers to replace oil-derived acrylates, of which they are cyclic analogues. Despite this structural resemblance, the reactivity of the unsaturated ester moiety of electron-poor butenolides leans toward that of maleic anhydride, another essential monomer that does not homopolymerize but copolymerizes in a highly alternating fashion with polarized electron-rich comonomers. By studying the reactivity of 5-methoxy and 5-acyloxy butenolides through a combination of kinetics and density functional theory (DFT) experiments, we explain why electron-poor butenolides constitute a missing link between acrylates and maleic anhydride in radical polymerization.

Toward 18 F-Labeled Theranostics: A Single Agent that Can Be Labeled with 18 F, 64 Cu, or 177 Lu.

We report a single-molecule radiotracer that can be labeled independently with 18 F-fluoride or radiometals (64 Cu, 177 Lu) in a single step. A prostate-specific membrane antigen (PSMA)-targeting ligand, armed with both an organotrifluoroborate and a metal-chelator (DOTA), was designed to optionally afford 18 F-, 64 Cu- or 177 Lu-labeled products that were injected into mice bearing prostate cancer (LNCaP) xenografts. PET/CT images and ex vivo biodistribution data show high, specific tumor uptake irrespective of which radionuclide is used, thereby demonstrating a new approach to combining, in a single molecule, 18 F-labeling capabilities for PET imaging with radiometalation for potential imaging and therapeutic applications.

N,O-Dialkyl deoxynojirimycin derivatives as CERT START domain ligands.

Dysregulation of the ceramide transport protein CERT is associated to diseases such as cancer. In search for new CERT START domain ligands, N-dodecyl-deoxynojirimycin (N-dodecyl-DNJ) iminosugar was found to display, as a ceramide mimic, significant protein recognition. To reinforce the lipophilic interactions and strengthen this protein binding, a docking study was carried out in order to select the optimal position on which to introduce an additional O-alkyl chain on N-dodecyl-DNJ. Analysis of the calculated poses for three different regioisomers indicated an optimal calculated interaction pattern for N,O3-didodecyl-DNJ. The two most promising regioisomers were prepared by a divergent route and their binding to the CERT START domain was evaluated with fluorescence intensity (FLINT) binding assay. N,O3-didodecyl-DNJ was confirmed to be a new binder prototype with level of protein recognition in the FLINT assay comparable to the best known ligands from the alkylated HPA-12 series. This work opens promising perspectives for the development of new inhibitors of CERT-mediated ceramide trafficking.

Giant Glycosidase Inhibitors: First- and Second-Generation Fullerodendrimers with a Dense Iminosugar Shell.

The multivalent effect in glycosidase inhibition is a new topic in glycoscience that has emerged a few years ago, with the discovery of neoglycoclusters displaying strong binding enhancements over the corresponding monovalent inhibitor. Iminosugar-fullerene conjugates with high valencies have been prepared from iminosugar-terminated dendrons and a clickable fullerene hexa-adduct scaffold. The simultaneous grafting of twelve dendrons allows for a very fast dendritic growth thus limiting the number of synthetic steps required to prepare compounds with a high number of peripheral units. The grafting of first- and second-generation dendrons provided fullerodendrimers surrounded by 36 and 108 peripheral iminosugars, respectively. Inhibition studies have been carried out with a panel of glycosidases. In the particular case of Jack bean α-mannosidase, the 108-valent nanoconstruct displays inhibition in the nanomolar range and an additional binding enhancement of one order of magnitude when compared to the 36-valent analogues.

Structural Basis of Outstanding Multivalent Effects in Jack Bean α-Mannosidase Inhibition.

Multivalent design of glycosidase inhibitors is a promising strategy for the treatment of diseases involving enzymatic hydrolysis of glycosidic bonds in carbohydrates. An essential prerequisite for successful applications is the atomic-level understanding of how outstanding binding enhancement occurs with multivalent inhibitors. Herein we report the first high-resolution crystal structures of the Jack bean α-mannosidase (JBα-man) in apo and inhibited states. The three-dimensional structure of JBα-man in complex with the multimeric cyclopeptoid-based inhibitor displaying the largest binding enhancements reported so far provides decisive insight into the molecular mechanisms underlying multivalent effects in glycosidase inhibition.

Direct Access to MIDA Acylboronates through Mild Oxidation of MIDA Vinylboronates.

Acylboronate esters/trifluoroborates represent an elusive class of boronates that are of increasing interest for both fundamental study as well as applications at the interface of chemistry and biology. Their preparation has been limited by the use of strongly basic anions, often introduced in multistep reactions. Herein, we demonstrate the facile preparation of acylboronate N-methyliminodiacetyl (MIDA) esters from alkenyl-2-boronate esters through mild dihydroxylation and meta-periodate cleavage. Given the well-known functional-group tolerance of this mild reaction sequence and the availability of alkenyl-2-boronates, this method should greatly increase access to acylboronate MIDA esters.

Iminosugar-Cyclopeptoid Conjugates Raise Multivalent Effect in Glycosidase Inhibition at Unprecedented High Levels.

A series of cyclopeptoid-based iminosugar clusters has been evaluated to finely probe the ligand content-dependent increase in α-mannosidase inhibition. This study led to the largest binding enhancement ever reported for an enzyme inhibitor (up to 4700-fold on a valency-corrected basis), which represents a substantial advance over the multivalent glycosidase inhibitors previously reported. Electron microscopy imaging and analytical data support, for the best multivalent effects, the formation of a strong chelate complex in which two mannosidase molecules are cross-linked by one inhibitor.

Toward a Molecular Lego Approach for the Diversity-Oriented Synthesis of Cyclodextrin Analogues Designed as Scaffolds for Multivalent Systems.

A modular strategy has been developed to access a diversity of cyclic and acyclic oligosaccharide analogues designed as prefunctionalized scaffolds for the synthesis of multivalent ligands. This convergent approach is based on bifunctional sugar building blocks with two temporarily masked functionalities that can be orthogonally activated to perform Cu(I)-catalyzed azide-alkyne cycloaddition reactions (CuAAC). The reducing end is activated as a glycosyl azide and masked as a 1,6-anhydro sugar, while the nonreducing end is activated as a free alkyne and masked as a triethylsilyl-alkyne. Following a cyclooligomerization approach, the first examples of close analogues of cyclodextrins composed of d-glucose residues and triazole units bound together through α-(1,4) linkages were obtained. The cycloglucopyranoside analogue containing four sugar units was used as a template to prepare multivalent systems displaying a protected d-mannose derivative or an iminosugar by way of CuAAC. On the other hand, the modular approach led to acyclic alkyne-functionalized scaffolds of a controlled size that were used to synthesize multivalent iminosugars.

Design, synthesis and photochemical properties of the first examples of iminosugar clusters based on fluorescent cores.

The synthesis and photophysical properties of the first examples of iminosugar clusters based on a BODIPY or a pyrene core are reported. The tri- and tetravalent systems designed as molecular probes and synthesized by way of Cu(I)-catalysed azide-alkyne cycloadditions are fluorescent analogues of potent pharmacological chaperones/correctors recently reported in the field of Gaucher disease and cystic fibrosis, two rare genetic diseases caused by protein misfolding.

Synthesis of the first examples of iminosugar clusters based on cyclopeptoid cores.

Cyclic N-propargyl α-peptoids of various sizes were prepared by way of macrocyclizations of linear N-substituted oligoglycines. These compounds were used as molecular platforms to synthesize a series of iminosugar clusters with different valency and alkyl spacer lengths by means of Cu(I)-catalysed azide-alkyne cycloadditions. Evaluation of these compounds as α-mannosidase inhibitors led to significant multivalent effects and further demonstrated the decisive influence of scaffold rigidity on binding affinity enhancements.

Development of a modular photoreactor for the upscaling of continuous flow photochemistry.

The upscaling of biphasic photochemical reactions is challenging because of the inherent constraints of liquid-gas mixing and light penetration. Using semi-permeable coaxial flow chemistry within a modular photoreactor, the photooxidation of the platform chemical furfural was scaled up to produce routinely 29 gram per day of biobased building block hydroxybutenolide, a precursor to acrylate alternatives.

Flexible polyfluorinated bis-diazirines as molecular adhesives.

Motivated by a desire to develop flexible covalent adhesives that afford some of the same malleability in the adhesive layer as traditional polymer-based adhesives, we designed and synthesized two flexible, highly fluorinated bis-diazirines. Both molecules are shown to function as effective crosslinkers for polymer materials, and to act as strong adhesives when painted between two polymer objects of low surface energy, prior to thermal activation. Data obtained from lap-shear experiments suggests that greater molecular flexibility is correlated with improved mechanical compliance in the adhesive layer.

Synthesis and 18F-radiolabeling of thymidine AMBF3 conjugates.

In pursuit of 18F-labeled nucleosides for positron emission tomography (PET) imaging, we report on the chemical and radiochemical synthesis of two thymidine (dT) analogs, dT-C5-AMBF3 and dT-N3-AMBF3, that are radiofluorinated by isotope exchange (IEX) and studied as PET imaging agents in mice with tumor xenografts. dT-C5-AMBF3 shows preferential, and tumor-specific, uptake over dT-N3-AMBF3. This work provides a new synthetic method in order to access new nucleoside tracers for PET imaging.

A broadly applicable cross-linker for aliphatic polymers containing C-H bonds.

Addition of molecular cross-links to polymers increases mechanical strength and improves corrosion resistance. However, it remains challenging to install cross-links in low-functionality macromolecules in a well-controlled manner. Typically, high-energy processes are required to generate highly reactive radicals in situ, allowing only limited control over the degree and type of cross-link. We rationally designed a bis-diazirine molecule whose decomposition into carbenes under mild and controllable conditions enables the cross-linking of essentially any organic polymer through double C-H activation. The utility of this molecule as a cross-linker was demonstrated for several diverse polymer substrates (including polypropylene, a low-functionality polymer of long-standing challenge to the field) and in applications including adhesion of low-surface-energy materials and the strengthening of polyethylene fabric.

One-Step 18F-Labeling and Preclinical Evaluation of Prostate-Specific Membrane Antigen Trifluoroborate Probes for Cancer Imaging.

After the identification of the high-affinity glutamate-ureido scaffold, the design of several potent 18F- and 68Ga-labeled tracers has allowed spectacular progress in imaging recurrent prostate cancer by targeting the prostate-specific membrane antigen (PSMA). We evaluated a series of PSMA-targeting probes that are 18F-labeled in a single step for PET imaging of prostate cancer. Methods: We prepared 8 trifluoroborate constructs for prostate cancer imaging, to study the influence of the linker and the trifluoroborate prosthetic on pharmacokinetics and image quality. After 1-step labeling by 19F-18F isotopic exchange, the radiotracers were injected in mice bearing LNCaP xenografts, with or without blocking controls, to assess specific uptake. PET/CT images and biodistribution data were acquired at 1 h after injection and compared with 18F-DCFPyL on the same mouse strain and tumor model. Results: All tracers exhibited nanomolar affinities, were labeled in good radiochemical yields at high molar activities, and exhibited high tumor uptake in LNCaP xenografts with clearance from nontarget organs. Most derivatives with a naphthylalanine linker showed significant gastrointestinal excretion. A radiotracer incorporating this linker with a dual trifluoroborate-glutamate labeling moiety showed high tumor uptake, low background activity, and no liver or gastrointestinal track accumulation. Conclusion: PSMA-targeting probes with trifluoroborate prosthetic groups represent promising candidates for prostate cancer imaging because of facile labeling while affording high tumor uptake values and contrast ratios that are similar to those obtained with 18F-DCFPyL.

Preliminary evaluation of 18F-labeled LLP2A-trifluoroborate conjugates as VLA-4 (α4ß1 integrin) specific radiotracers for PET imaging of melanoma.

INTRODUCTION: The transmembrane α4ß1 integrin receptor, or very-late antigen 4 (VLA-4), is associated with tumor metastasis and angiogenesis, the development of chemotherapeutic drug resistance, and is overexpressed in multiple myelomas, osteosarcomas, lymphomas, leukemias, and melanomas. The peptidomimetic, LLP2A, is a high-affinity ligand with specificity for the extracellular portion of VLA-4 and several conjugates have been evaluated in vivo by NIR-fluorescence, 111In-SPECT and 68Ga- and 64Cu-PET imaging, but to date, not with 18F-PET. METHODS: Using two highly stable organotrifluoroborate prosthetic groups: ammoniumdimethyl-trifluoroborate (AMBF3) and a new N-pyridinyl-para-trifluoroborate (N-Pyr-p-BF3), both capable of facile aqueous 18F-labeling by isotope exchange (IEX), we present the first PET imaging evaluations of two [18F]R-BF3--PEG2-LLP2A tracers using VLA-4 overexpressing B16-F10 murine melanoma tumor mouse models. RESULTS: Here, we demonstrate successful one-step 18F-labeling of both conjugates with wet NCA [18F]F- in radiochemical yields of up to 11.6% within 75 min at molar activities of 40-100 GBq/µmol. Average tumor uptake values based on ex vivo biodistribution values were 4.4%ID/g (11) and 2.8%ID/g (12) using 18F-labeled LLP2A-conjugates with the two prosthetic groups: N-Pyr-p-BF3 (5) and alkyl-N,N-dimethylammonio-BF3 (AMBF3) (7), respectively, and was found to be target-specific as evidenced by in vivo blocking controls. Dynamic PET scanning and biodistribution studies revealed slow clearance of the [18F]R-BF3--PEG2-LLP2A tracers from the tumors, and also substantial uptake in the intestines, gall bladder, liver and bladder. Observed bone uptake was blockable, consistent with known VLA-4 expression in hematopoietic stem cells found in bone marrow. CONCLUSIONS: These studies show that these [18F]R-BF3--PEG2-LLP2A conjugates (11 and 12) are promising VLA-4 targeting radiotracers, yet, further optimization will be required to reduce uptake in the gastro-intestinal tract.

Recent Advances in 18F Radiochemistry: A Focus on B-18F, Si-18F, Al-18F, and C-18F Radiofluorination via Spirocyclic Iodonium Ylides.

Straightforward radiosynthesis protocols for 18F-labeled radiopharmaceuticals are an indispensable but often overlooked prerequisite to successfully perform molecular imaging studies in vivo by PET. In recent years, thanks to the expansion of the 18F chemical toolbox, structurally diverse and novel clinically relevant radiopharmaceuticals have been synthesized with both high efficiency and ready implementation. This article provides an overview of recent 18F-labeling methodologies, specifically for B-18F, Si-18F, Al-18F, and iodine (III)-mediated radiofluorination via the spirocyclic iodonium ylide technology.