Large harvested energy with non-linear pyroelectric modules.

Coming up with sustainable sources of electricity is one of the grand challenges of this century. The research field of materials for energy harvesting stems from this motivation, including thermoelectrics1, photovoltaics2 and thermophotovoltaics3. Pyroelectric materials, converting temperature periodic variations in electricity, have been considered as sensors4 and energy harvesters5-7, although we lack materials and devices able to harvest in the joule range. Here we develop a macroscopic thermal energy harvester made of 42 g of lead scandium tantalate in the form of multilayer capacitors that produces 11.2 J of electricity per thermodynamic cycle. Each pyroelectric module can generate up to 4.43 J cm-3 of electric energy density per cycle. We also show that two of these modules weighing 0.3 g are sufficient to sustainably supply an autonomous energy harvester embedding microcontrollers and temperature sensors. Finally, we show that for a 10 K temperature span these multilayer capacitors can reach 40% of Carnot efficiency. These performances stem from (1) a ferroelectric phase transition enabling large efficiency, (2) low leakage current preventing losses and (3) high breakdown voltage. These macroscopic, scalable and highly efficient pyroelectric energy harvesters enable the reconsideration of the production of electricity from heat.

Direct Electrocaloric Characterization of Ceramic Films.

Reliable and accurate characterization of the electrocaloric effect is necessary to understand the intrinsic properties of materials. To date, several methods are developed to directly measure the electrocaloric effect. However, each of them has some limitations, making them less suitable for characterizing ceramic films, which rely almost exclusively on less accurate indirect methods. Here, a new approach is proposed to address the process of rapid heat dissipation in ceramic films and to detect the electrically induced temperature change before it thermally bonds with the surrounding elements. By using a polymer substrate that slows heat dissipation to the substrate and fast infrared imaging, a substantial part of the adiabatic electrocaloric effect in Pb(Mg1/3 Nb2/3 )O3 -based ceramic films is captured. Infrared imaging provides a robust technique to reduce the ratio between the adiabatic and the measured electrocaloric temperature change in micrometer-sized ceramic films to a single-digit number, ≈3.5. The obtained results are validated with another direct thermometric method and compared with the results obtained with an indirect approach. Despite different measurement principles, the results obtained with the two direct methods agree well. The proposed approach is timely and can open a door to verify the predicted giant electrocaloric effects in ceramic films.

Giant electrocaloric materials energy efficiency in highly ordered lead scandium tantalate.

Electrocaloric materials are promising working bodies for caloric-based technologies, suggested as an efficient alternative to the vapor compression systems. However, their materials efficiency defined as the ratio of the exchangeable electrocaloric heat to the work needed to trigger this heat remains unknown. Here, we show by direct measurements of heat and electrical work that a highly ordered bulk lead scandium tantalate can exchange more than a hundred times more electrocaloric heat than the work needed to trigger it. Besides, our material exhibits a maximum adiabatic temperature change of 3.7 K at an electric field of 40 kV cm-1. These features are strong assets in favor of electrocaloric materials for future cooling devices.