RESUMO
Non-aqueous solvents, in particular N,N-dimethylaniline (NMP), are widely applied for electrode fabrication since most sodium layered oxide cathode materials are readily damaged by water molecules. However, the expensive price and poisonousness of NMP unquestionably increase the cost of preparation and post-processing. Therefore, developing an intrinsically stable cathode material that can implement the water-soluble binder to fabricate an electrode is urgent. Herein, a stable nanosheet-like Mn-based cathode material is synthesized as a prototype to verify its practical applicability in sodium-ion batteries (SIBs). The as-prepared material displays excellent electrochemical performance and remarkable water stability, and it still maintains a satisfactory performance of 79.6% capacity retention after 500 cycles even after water treatment. The in situ X-ray diffraction (XRD) demonstrates that the synthesized material shows an absolute solid-solution reaction mechanism and near-zero-strain. Moreover, the electrochemical performance of the electrode fabricated with a water-soluble binder shows excellent long-cycling stability (67.9% capacity retention after 500 cycles). This work may offer new insights into the rational design of marvelous water stability cathode materials for practical SIBs.
RESUMO
Ischemic ulcers pose a multifaceted clinical dilemma for patients with atherosclerosis, frequently compounded by suboptimal wound healing mechanisms. The dual function of Transforming Growth Factor Beta 3 (TGF-ß3) in ischemic ulcer healing is not fully comprehended, despite its involvement in modulating inflammatory responses and tissue regeneration. The main aim of this investigation was to clarify the functions and mechanisms by which TGF-ß3 regulates inflammatory responses and promotes wound healing in patients with ischemic ulcers who have atherosclerosis. Between August 2022 and November 2023, this cross-sectional investigation was conducted on 428 patients diagnosed with atherosclerotic ischemic ulcers in Haikou, China. The expression and function of TGF-ß3 were examined throughout the different stages of wound healing, including inflammation, proliferation and remodelling. In addition to documenting patient demographics and ulcer characteristics, an analysis was conducted on biopsy samples to determine the expression of TGF-ß3, pro-inflammatory and anti-inflammatory markers. A subset of patients were administered topical TGF-ß3 in order to evaluate its therapeutic effects. The expression pattern of TGF-ß3 was found to be stage-dependent and significant, exhibiting increased levels during the phase of inflammation and reduced activity in subsequent phases. TGF-ß3 levels were found to be greater in ulcers that were larger and deeper, especially in inflammatory phase. TGF-ß3 applied topically induced discernible enhancement in ulcer healing parameters, such as reduction in ulcer depth and size. The therapeutic significance of TGF-ß3 was emphasised due to its twofold function of regulating the inflammatory environment and facilitating the regeneration of damaged tissues. Ischemic ulcer lesion healing is significantly influenced by TGF-ß3, which functions as an anti-inflammatory and pro-inflammatory mediator. Its correlation with ulcer characteristics and stages of healing suggests that it may have utility as a targeted therapeutic agent.
Assuntos
Aterosclerose , Fator de Crescimento Transformador beta3 , Humanos , Anti-Inflamatórios , Estudos Transversais , Inflamação , Fator de Crescimento Transformador beta/análise , Fator de Crescimento Transformador beta/metabolismo , Fator de Crescimento Transformador beta3/uso terapêutico , Fator de Crescimento Transformador beta3/farmacologia , Úlcera , CicatrizaçãoRESUMO
ABSTRACT: Angioplasty often fails due to the abnormal proliferation of vascular smooth muscle cells (VSMCs). Success rates of angioplasty may increase following the administration of an agent that effectively ameliorates aberrant vascular remodeling. Icariside II (ICS-II) is a natural flavonol glycoside extract from the Chinese herbal medicine Epimedii that possesses several medicinal qualities that are beneficial in humans. Nevertheless, the role of ICS-II in addressing aberrant vascular remodeling have yet to be clarified. The current investigation studies the molecular effects of ICS-â ¡ on balloon-inflicted neointimal hyperplasia in rats in vivo and on platelet-derived growth factor-induced vascular proliferation in primary rat aortic smooth muscle cells (VSMCs) in vitro. ICS-II was found to be as effective as rapamycin, the positive control used in this study. ICS-II inhibited neointimal formation in injured rat carotid arteries and notably reduced the expression of Wnt7b. ICS-â ¡ significantly counteracted platelet-derived growth factor-induced VSMCs proliferation. Cell cycle analysis showed that ICS-II triggered cell cycle arrest during the G1/S transition. Western blot analysis further indicated that this cell cycle arrest was likely through Wnt7b suppression that led to CCND1 inhibition. In conclusion, our findings demonstrate that ICS-II possesses significant antiproliferative qualities that counteracts aberrant vascular neointimal hyperplasia. This phenomenon most likely occurs due to the suppression of the Wnt7b/CCND1 axis.
Assuntos
Lesões das Artérias Carótidas , Remodelação Vascular , Animais , Lesões das Artérias Carótidas/tratamento farmacológico , Lesões das Artérias Carótidas/metabolismo , Movimento Celular , Proliferação de Células , Flavonoides , Hiperplasia/metabolismo , Músculo Liso Vascular/metabolismo , Miócitos de Músculo Liso/metabolismo , Neointima/metabolismo , Fator de Crescimento Derivado de Plaquetas/metabolismo , Fator de Crescimento Derivado de Plaquetas/farmacologia , Ratos , Ratos Sprague-DawleyRESUMO
As a common abiotic stress, drought severely impairs the growth, development, and even survival of plants. Here we report a transcription factor, Caragana korshinskii REVOLUTA(CkREV), which can bidirectionally regulate the expression of the critical enzyme gene CkYUC5 in auxin synthesis according to external environment changes, so as to control the biosynthesis of auxin and further enhance the drought resistance of plants. Quantitative analysis reveals that the expression level of both CkYUC5 and AtYUC5 is down-regulated after C. korshinskii and Arabidopsis thaliana are exposed to drought. Functional verification of CkREV reveals that CkREV up-regulates the expression of AtYUC5 in transgenic A. thaliana under common conditions, while down-regulating it under drought conditions. Meanwhile, the expression of CkYUC5 is also down-regulated in C. korshinskii leaves instantaneously overexpressing CkREV. We apply a dual-luciferase reporter system to discover that CkREV can bind to the promoter of CkYUC5 to regulate its expression, which is further proved by EMSA and Y1H esxperiments. Functional verification of CkREV in C. korshinskii and transgenic A. thaliana shows that CkREV can regulate the expression of CkYUC5 and AtYUC5 in a contrary way, maintaining the equilibrium of plants between growth and drought resisting. CkREV can positively regulate the expression of CkYUC5 to promote auxin synthesis in favor of growth under normal development. However, CkREV can also respond to external signals and negatively regulate the expression of CkYUC5, which inhibits auxin synthesis in order to reduce growth rate, lower water demands, and eventually improve the drought resistance of plants.
Assuntos
Arabidopsis , Caragana , Arabidopsis/genética , Arabidopsis/metabolismo , Caragana/genética , Secas , Regulação da Expressão Gênica de Plantas , Ácidos Indolacéticos/metabolismo , Ligases/metabolismo , Plantas Geneticamente Modificadas/metabolismo , Estresse Fisiológico/genéticaRESUMO
ABSTRACT: This study summarized the literature regarding the application of pre-bent titanium miniplates in orthognathic surgery and evaluated the extra deformation of the manually pre-bent titanium miniplates via finite element analysis for acquiring higher surgical accuracy. The literature was reviewed with a chart. Three models of titanium miniplates with different thicknesses (1.0âmm, 0.8âmm, 0.6âmm) were created using COMSOL Multiphysics software for biomechanical behavior analysis. The 3 models were virtually bent into 5 angles (15 degree, 30 degree, 45 degree, 60 degree, 80 degree). respectively to simulate the preoperative virtual bending, then to simulate the practical manual bending via finite element analysis. The stresses and displacements of these models were recorded. The models from virtual bending simulation and manual bending simulation were registered to analyze the deviations. The results showed that the maximum stress and the displacement deviations between the virtual bending models and the manual bending models increased with the thickness and bending angle of the pre-bent miniplate models. To improve the surgical accuracy, measures should be applied to the manually pre-bent titanium miniplates to reduce the extra deformation when the plate being thicker and the bending angle being larger.
Assuntos
Cirurgia Ortognática , Procedimentos Cirúrgicos Ortognáticos , Placas Ósseas , Análise de Elementos Finitos , Fixação Interna de Fraturas , Humanos , Estresse Mecânico , TitânioRESUMO
This study was aimed to investigate differences in antioxidant and anti-inflammatory effects of propofol at two commonly used dosing schedules on morbidly obese patients. Twenty-two morbidly obese patients were randomly divided into two groups, namely, TBW (dosing based on total body weight) and LBW (dosing based on lean body weight) groups. Three biomarkers, i.e. superoxide dismutase (SOD), malondialdehyde (MDA) and nitric oxide (NO) were measured as indicators of the level of oxidation stress reaction. Pro-inflammatory cytokines including Interleukin-6 (IL-6) and Interleukin-8 (IL-8) were used to describe the degree of inflammation. Plasma levels of SOD, MDA and NO were increased and reached a peak value 0.5h after anesthesia induction, but the increase was smaller in the LBW group compared with the TBW group. Besides, plasma concentrations of IL-6 and IL-8 were also increased and attained a peak level 0.5h after anesthesia induction, but the increase was higher in the TBW group compared with the LBW group. The LBW-based dosing of propofol had more potent antioxidant and anti-inflammatory effects than the TBW-based dosing during anesthesia induction period on morbidly obese patients. This study provided a dosing recommendation of propofol for morbidly obese patients.
Assuntos
Anestésicos Intravenosos/administração & dosagem , Obesidade Mórbida/cirurgia , Propofol/administração & dosagem , Adulto , Anestesia Geral , Anti-Inflamatórios , Antioxidantes , Cálculos da Dosagem de Medicamento , Feminino , Derivação Gástrica , Humanos , Interleucina-6/metabolismo , Interleucina-8/metabolismo , Masculino , Malondialdeído/metabolismo , Óxido Nítrico/metabolismo , Obesidade Mórbida/metabolismo , Superóxido Dismutase/metabolismo , Adulto JovemRESUMO
The growing world population and shrinkage of arable land demand yield improvement of rice, one of the most important staple crops. To elucidate the genetic basis of yield and uncover its associated loci in rice, we resequenced the core recombinant inbred lines of Liang-You-Pei-Jiu, the widely cultivated super hybrid rice, and constructed a high-resolution linkage map. We detected 43 yield-associated quantitative trait loci, of which 20 are unique. Based on the high-density physical map, the genome sequences of paternal variety 93-11 and maternal cultivar PA64s of Liang-You-Pei-Jiu were significantly improved. The large recombinant inbred line population combined with plentiful high-quality single nucleotide polymorphisms and insertions/deletions between parental genomes allowed us to fine-map two quantitative trait loci, qSN8 and qSPB1, and to identify days to heading8 and lax panicle1 as candidate genes, respectively. The quantitative trait locus qSN8 was further confirmed to be days to heading8 by a complementation test. Our study provided an ideal platform for molecular breeding by targeting and dissecting yield-associated loci in rice.
Assuntos
Genoma de Planta , Hibridização Genética , Oryza/genética , Recombinação Genética , Ligação Genética , Locos de Características QuantitativasRESUMO
Layered oxides have become the research focus of cathode materials for sodium-ion batteries (SIBs) due to the low cost, simple synthesis process, and high specific capacity. However, the poor air stability, unstable phase structure under high voltage, and slow anionic redox kinetics hinder their commercial application. In recent years, the concept of manipulating orbital hybridization has been proposed to simultaneously regulate the microelectronic structure and modify the surface chemistry environment intrinsically. In this review, the hybridization modes between atoms in 3d/4d transition metal (TM) orbitals and O 2p orbitals near the region of the Fermi energy level (EF) are summarized based on orbital hybridization theory and first-principles calculations as well as various sophisticated characterizations. Furthermore, the underlying mechanisms are explored from macro-scale to micro-scale, including enhancing air stability, modulating high working voltage, and stabilizing anionic redox chemistry. Meanwhile, the origin, formation conditions, and different types of orbital hybridization, as well as its application in layered oxide cathodes are presented, which provide insights into the design and preparation of cathode materials. Ultimately, the main challenges in the development of orbital hybridization and its potential for the production application are also discussed, pointing out the route for high-performance practical sodium layered oxide cathodes.
RESUMO
The development of cost-efficient, long-lifespan, and all-climate sodium-ion batteries is of great importance for advancing large-scale energy storage but is plagued by the lack of suitable cathode materials. Here, we report low-cost Na-rich Mn-based Prussian blue analogues with superior rate capability and ultralong cycling stability over 10,000 cycles via structural optimization with electrochemically inert Ni atoms. Their thermal stability, all-climate properties, and potential in full cells are investigated in detail. Multiple in situ characterizations reveal that the outstanding performances benefit from their highly reversible three-phase transformations and trimetal (Mn-Ni-Fe) synergistic effects. In addition, a high sodium diffusion coefficient and a low volume distortion of 2.3% are observed through in situ transmission electron microscopy and first-principles calculations. Our results provide insights into the structural engineering of Prussian blue analogues for advanced sodium-ion batteries in large-scale energy storage applications.
RESUMO
Cobalt substitution for manganese sites in Na0.44MnO2 initiates a dynamic structural evolution process, yielding a composite cathode material comprising intergrown P2 and P3 phases. The novel P2/P3 composite cathode exhibits a reversible phase transition process during Na+ extraction/insertion, showcasing its attractive battery performance in sodium-ion batteries.
RESUMO
P3-layered transition oxide cathodes have garnered considerable attention owing to their high initial capacity, rapid Na+ kinetics, and less energy consumption during the synthesis process. Despite these merits, their practical application is hindered by the substantial capacity degradation resulting from unfavorable structural transformations, Mn dissolution and migration. In this study, we systematically investigated the failure mechanisms of P3 cathodes, encompassing Mn dissolution, migration, and the irreversible P3-O3' phase transition, culminating in severe structural collapse. To address these challenges, we proposed an interfacial spinel local interlocking strategy utilizing P3/spinel intergrowth oxide as a proof-of-concept material. As a result, P3/spinel intergrowth oxide cathodes demonstrated enhanced cycling performance. The effectiveness of suppressing Mn migration and maintaining local structure of interfacial spinel local interlocking strategy was validated through depth-etching X-ray photoelectron spectroscopy, X-ray absorption spectroscopy, and in situ synchrotron-based X-ray diffraction. This interfacial spinel local interlocking engineering strategy presents a promising avenue for the development of advanced cathode materials for sodium-ion batteries.
RESUMO
It remains a tremendous challenge to achieve high-efficiency bifunctional electrocatalysts for both the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER) for hydrogen production by water splitting. Herein, a novel hybrid of 0D nickel nanoparticles dispersed on the one-dimensional (1D) molybdenum carbide micropillars embedded in the carbon layers (Ni/Mo2C@C) was successfully prepared on nickel foam by a facile pyrolysis strategy. During the synthesis process, the nickel nanoparticles and molybdenum carbide were simultaneously generated under H2 and C2H2 mixed atmospheres and conformally encapsulated in the carbon layers. Benefiting from the distinctive 0D/1D heterostructure and the synergistic effect of the biphasic Mo2C and Ni together with the protective effect of the carbon layer, the reduced activation energy barriers and fast catalytic reaction kinetics can be achieved, resulting in a small overpotential of 96 mV for the HER and 266 mV for the OER at the current density of 10 mA cm-2 together with excellent durability in 1.0 M KOH electrolyte. In addition, using the developed Ni/Mo2C@C as both the cathode and anode, the constructed electrolyzer exhibits a small voltage of 1.55 V for the overall water splitting. The novel designed Ni/Mo2C@C may give inspiration for the development of efficient bifunctional catalysts with low-cost transition metal elements for water splitting.
RESUMO
Layered transition metal oxides (NaxTMO2) possess attractive features such as large specific capacity, high ionic conductivity, and a scalable synthesis process, making them a promising cathode candidate for sodium-ion batteries (SIBs). However, NaxTMO2 suffer from multiple phase transitions and Na+/vacancy ordering upon Na+ insertion/extraction, which is detrimental to their electrochemical performance. Herein, we developed a novel cathode material that exhibits an abnormal P2-type structure at a stoichiometric content of Na up to 1. The cathode material delivers a reversible capacity of 108 mA h g-1 at 0.2C and 97 mA h g-1 at 2C, retaining a capacity retention of 76.15% after 200 cycles within 2.0-4.3 V. In situ diffraction studies demonstrated that this material exhibits an absolute solid-solution reaction with a low volume change of 0.8% during cycling. This near-zero-strain characteristic enables a highly stabilized crystal structure for Na+ storage, contributing to a significant improvement in battery performance. Overall, this work presents a simple yet effective approach to realizing high Na content in P2-type layered oxides, offering new opportunities for high-performance SIB cathode materials.
RESUMO
Optimizing charge transfer and alleviating volume expansion in electrode materials are critical to maximize electrochemical performance for energy-storage systems. Herein, an atomically thin soft-rigid Co9 S8 @MoS2 core-shell heterostructure with dual cation vacancies at the atomic interface is constructed as a promising anode for high-performance sodium-ion batteries. The dual cation vacancies involving VCo and VMo in the heterostructure and the soft MoS2 shell afford ionic pathways for rapid charge transfer, as well as the rigid Co9 S8 core acting as the dominant active component and resisting structural deformation during charge-discharge. Electrochemical testing and theoretical calculations demonstrate both excellent Na+ -transfer kinetics and pseudocapacitive behavior. Consequently, the soft-rigid heterostructure delivers extraordinary sodium-storage performance (389.7 mA h g-1 after 500 cycles at 5.0 A g-1 ), superior to those of the single-phase counterparts: the assembled Na3 V2 (PO4 )3 ||d-Co9 S8 @MoS2 /S-Gr full cell achieves an energy density of 235.5 Wh kg-1 at 0.5 C. This finding opens up a unique strategy of soft-rigid heterostructure and broadens the horizons of material design in energy storage and conversion.
RESUMO
Manganese-based layered oxides are prospective cathode materials for sodium-ion batteries (SIBs) due to their low cost and high theoretical capacities. The biphasic intergrowth structure of layered cathode materials is essential for improving the sodium storage performance, which is attributed to the synergistic effect between the two phases. However, the in-depth formation mechanism of biphasic intergrowth materials remains unclear. Herein, the layered/tunnel intergrowth Na0.6MnO2 (LT-NaMO) as a model material was successfully prepared, and their formation processes and electrochemical performance were systematically investigated. In situ high-temperature X-ray diffraction displays the detailed evolution process and excellent thermal stability of the layered/tunnel intergrowth structure. Furthermore, severe structural strain and large lattice volume changes are significantly mitigated by the interlocking effect between the phase interfaces, which further enhances the structural stability of the cathode materials during the charging/discharging process. Consequently, the LT-NaMO cathode displays fast Na+ transport kinetics with a remarkable capacity retention of â¼70.5% over 300 cycles at 5C, and its assembled full cell with hard carbon also exhibits high energy density. These findings highlight the superior electrochemical performance of intergrowth materials due to interlocking effects between layered and tunnel structures and also provide unique insights into the construction of intergrowth cathode materials for SIBs.
RESUMO
Due to their high capacity and sufficient Na+ storage, O3-NaNi0.5Mn0.5O2 has attracted much attention as a viable cathode material for sodium-ion batteries (SIBs). However, the challenges of complicated irreversible multiphase transitions, poor structural stability, low operating voltage, and an unstable oxygen redox reaction still limit its practical application. Herein, using O3-NaNi0.5Mn0.5-xSnxO2 cathode materials as the research model, a universal strategy based on bridging microstructure engineering and local electronic structure manipulation is proposed. The strategy can modulate the physical and chemical properties of electrode materials, so as to restrain the unfavorable and irreversible multiphase transformation, improve structural stability, manipulate redox potential, and stabilize the anion redox reaction. The effect of Sn substitution on the intrinsic local electronic structure of the material is articulated by density functional theory calculations. Meanwhile, the universal strategy is also validated by Ti substitution, which could be further extrapolated to other systems and guide the design of cathode materials in the field of SIBs.
RESUMO
With the continuous growth of vehicle per capita in recent years, tire wear particles (TWP) produced by tire wear on roads have been widely found in various environmental media, whose environmental behavior and effects have attracted extensive attention. After being produced, these microsized and nanosized TWP will drift into the atmosphere or enter the surrounding soil, rivers, and even into the ocean with rain and runoff. The existence of TWP significantly affects the composition of organic materials in the environment. Meanwhile, the release of heavy metals and organic additives from TWP will be harmful to organisms and human health. We summarized the sources and characteristics of TWP, their migration and diffusion in water, atmosphere, and soil environment. By analyzing the environmental impacts and ecological risks of TWP pollution, we proposed the key questions urgently to be solved and prevention measures.
Assuntos
Metais Pesados , Poluentes Químicos da Água , Monitoramento Ambiental , Humanos , Microplásticos , Plásticos , Solo , Poluentes Químicos da Água/análiseRESUMO
It is still very urgent and challenging to simultaneously develop high-rate and long-cycle oxide cathodes for sodium-ion batteries (SIBs) because of the sluggish kinetics and complex multiphase evolution during cycling. Here, the concept of accurately manipulating structural evolution and formulating high-performance heterostructured biphasic layered oxide cathodes by local chemistry and orbital hybridization modulation is reported. The P2-structure stoichiometric composition of the cathode material shows a layered P2- and O3-type heterostructure that is explicitly evidenced by various macroscale and atomic-scale techniques. Surprisingly, the heterostructured cathode displays excellent rate performance, remarkable cycling stability (capacity retention of 82.16% after 600 cycles at 2 C), and outstanding compatibility with hard carbon anode because of the integrated advantages of intergrowth structure and local environment regulation. Meanwhile, the formation process from precursors during calcination and the highly reversible dynamic structural evolution during the Na+ intercalation/deintercalation process are clearly articulated by a series of in situ characterization techniques. Also, the intrinsic structural properties and corresponding electrochemical behavior are further elucidated by the density of states and electron localization function of density functional theory calculations. Overall, this strategy, which finely tunes the local chemistry and orbitals hybridization for high-performance SIBs, will open up a new field for other materials.
RESUMO
In the past several years, rechargeable zinc batteries, featuring the merits of low cost, environmental friendliness, easy manufacturing, and enhanced safety, have, attracted much attention. Zinc (Zn) anodes for zinc metal batteries play an important role. In this review, the fundamental understanding of these batteries and modification strategies to deal with the problematic issues for Zn anodes, including dendrite growth, corrosion, and the hydrogen evolution phenomenon will be summarized. The practical application of Zn anodes can still lead to Zn dendrites, various side reactions, and serious safety risks. Therefore, metal-free anodes for "rocking chair" zinc ion batteries to replace Zn anodes are systemically reviewed. The performance and the zinc storage mechanism of metal-free anodes will be discussed. Subsequently, a "rocking chair" zinc ion battery prototype selected as a recent example is assessed to explore the merits and demerits of Zn anodes and metal-free anodes. To conclude, a perspective on the future of zinc metal batteries and "rocking chair" zinc ion batteries is presented. It is hoped that this review may provide for further improvement of commercial rechargeable zinc batteries.
RESUMO
PURPOSE: To investigate the effect of vitexin (VTX) on the expression of inflammatory cytokines in human dental pulp stem cells(hDPSCs) induced by lipopolysaccharide(LPS), and to explore the underlying mechanism. METHODS: hDPSCs were isolated and cultured, and CCK-8 method was used to detect the effect of VTX on proliferation of hDPSCs. hDPSCs were randomly divided into 4 groups: blank group (without LPS and VTX)ï¼LPS group (2 µg/mL LPS)ï¼2 µg/mL LPS + 25 µmol/L VTXï¼2 µg/mL LPS + 50 µmol/L VTX. The cells of all groups were cultured for 48 h. The gene levels of IL-1ßï¼ IL-6 and IL-8 in hDPSCs were detected by real time qPCR(RT-qPCR). The change of COX-2 and MAPKs signaling pathways were detected by Western blot. SPSS 16.0 software package was used for statistical analysis. RESULTS: When the VTX concentration was less than 200 µmol/L, the cell viability was not affected(P>0.05). VTX at 25 and 50 µmol/L significantly reduced LPS-induced expression of IL-1ß, IL-6 and IL-8 at gene levels and COX-2 at protein level (P<0.05). CONCLUSIONS: VTX significantly inhibited the activation of ERK and p38 signaling pathway. VTX can reduce LPS-induced inflammatory cytokine expression in hDPSCs via restraining the activation of ERK and p38 signaling pathway.