Dendrite-Free Dual-Phase Li-Ba Alloy Anode Enabled by Ordered Array of Built-in Mixed Conducting Microchannels.

The development and application of lithium (Li) anode is hindered by volumetric variation, dendritic Li growth, and parasitic reactions. Herein, a dual-phase Li-barium (Ba) alloy with self-assembled microchannels array is synthesized through a one-step thermal fusion method to investigate the inhibition effect of lithiophilic composite porous array on Li dendrites. The Li-rich Li-Ba alloy (BaLi24) as composite Li electrode exhibits an ordered porous structure of BaLi4 intermetallic compound after delithiation, which acts as a built-in 3D current collector during Li plating/striping process. Furthermore, the lithiophilic BaLi4 alloy scaffold is a mixed conductor, featuring with Li+ ions diffusion capability, which can efficiently transport the reduced Li to the interior of the electrode structure. This unique top-down growth mode can effectively prohibit Li dendrites growth and improve the space utilization of 3D electrode structure. The spin-polarized density functional theory (DFT) calculations suggest that the absorption capability of BaLi4 benefits the deposition of Li metal. As a result, the cell performance with the dual-phase Li-Ba alloy anode is significantly improved.

Supraglottic jet oxygenation and ventilation improves oxygenation during endoscopic retrograde cholangiopancreatography: a randomized controlled clinical trial.

PURPOSE: Hypoxia is one of the most frequent adverse events under deep sedation in the semiprone position. We hypothesized that supraglottic jet oxygenation and ventilation (SJOV) via Wei nasal jet tube (WNJ) can reduce the incidence of hypoxia in patients under deep sedation during endoscopic retrograde cholangiopancreatography (ERCP). METHODS: A total of 171 patients were divided into three groups: N group, supplementary oxygen via a nasopharyngeal airway (4-6 L/min); W group, supplementary oxygen via WNJ (4-6 L/min); WS group, SJOV via WNJ. The primary outcome was the incidence of adverse events, including sedation-related adverse events [SRAEs, hypoxemia (SpO2 = 75-89% lasted less than 60 s); severe hypoxemia (SpO2 < 75% at any time or SpO2 < 90% lasted more than 60 s] and subclinical respiratory depression (SpO2 = 90-95%). Other intraoperative and post-operative adverse events were also recorded as secondary outcomes. RESULTS: Compared with the N group, the incidence of hypoxemia and subclinical respiratory depression in the WS group was significantly lower (21% vs. 4%, P = 0.005; 27% vs. 6%, P = 0.002). Compared with Group W, the incidence of hypoxemia and subclinical respiratory depression in Group WS was also significantly less frequent (20% vs. 4%, P = 0.009; 21% vs. 6%, P = 0.014). No severe hypoxia occurred in the group WS, while four and one instances were observed in the group N and group W respectively. There were no significant differences in other adverse events among the three groups. CONCLUSION: SJOV can effectively improve oxygenation during ERCP in deeply sedated semiprone patients.

The Pillar Effect of Large-Size Alkaline Ions on the Electrochemical Stability of Sodium Manganese Hexacyanoferrate for Sodium-Ion Batteries.

Sodium manganese hexacyanoferrate (NaMnHCF) is an attractive candidate as a cathode material for sodium-ion batteries due to its low cost and high energy density. However, its practical application is hindered by poor electrochemical stability caused by the Jahn-Teller effect of Mn and the unstable structure of NaMnHCF. Here, this paper aims to address this issue by introducing highly stable AMnHCF (where A = K, Rb, or Cs) through a facile method to composite with NaMnHCF. The findings reveal that all AMnHCFs have a "pillar effect" on the crystal structure of NaMnHCF. It is observed that the degree of pillar effect varies depending on the specific AMnHCF used. The less electrochemically inactive the alkaline ion is and the greater the degree of compositing with NaMnHCF, the more dramatic the pillar effect. KMnHCF shows limited pillar effect due to its rough composition with NaMnHCF and the loss of K+ upon (de)intercalation. RbMnHCF has lower electrochemical activity and can be better composited with NaMnHCF. On the other hand, CsMnHCF exhibits the strongest pillar effect due to the inactivation of Cs+ and the excellent coherent structure formed by CsMnHCF and NaMnHCF. This research provides a new perspective on stabilizing NaMnHCF with other alkaline elements.

Assessment of Autologous Blood marker localIzation and intraoperative coLonoscopy localIzation in laparoscopic colorecTal cancer surgery (ABILITY): a randomized controlled trial.

BACKGROUND: Laparoscopic colorectal surgery has been proved to have similar oncological outcomes with open surgery. Due to the lack of tactile perception, surgeons may have misjudgments in laparoscopic colorectal surgery. Therefore, the accurate localization of a tumor before surgery is important, especially in the early stages of cancer. Autologous blood was thought a feasible and safe tattooing agent for preoperative endoscopic localization but its benefits remain controversial. We therefore proposed this randomized trial to the accuracy and safety of autogenous blood localization in small, serosa-negative lesion which will be resected by laparoscopic colectomy. METHODS: The current study is a single-center, open-label, non-inferiority, randomized controlled trial. Eligible participants would be aged 18-80 years and diagnosed with large lateral spreading tumors that could not be treated endoscopically, malignant polyps treated endoscopically that required additional colorectal resection, and serosa-negative malignant colorectal tumors (≤ cT3). A total of 220 patients would be randomly assigned (1:1) to autologous blood group or intraoperative colonoscopy group. The primary outcome is the localization accuracy. The secondary endpoint is adverse events related to endoscopic tattooing. DISCUSSION: This trial will investigate whether autologous blood marker achieves similar localization accuracy and safety in laparoscopic colorectal surgery compared to intraoperative colonoscopy. If our research hypothesis is statistically proved, the rational introduction of autologous blood tattooing in preoperative colonoscopy can help improve identification of the location of tumors for laparoscopic colorectal cancer surgery, performing an optimal resection, and minimizing unnecessary resections of normal tissues, thereby improving the patient's quality of life. Our research data will also provide high quality clinical evidence and data support for the conduction of multicenter phase III clinical trials. TRIAL REGISTRATION: This study is registered with ClinicalTrials.gov, NCT05597384. Registered 28 October 2022.

LncRNA LINC01871 sponging miR-142-3p to modulate ZYG11B promotes the chemoresistance of colorectal cancer cells by inducing autophagy.

BACKGROUND: Colorectal cancer (CRC) is a malignant tumor in the digestive tract. Increasing evidence indicated that chemoresistance leads to a poor prognosis of CRC. Herein, we aimed to uncover the potential mechanism by which long intergenic noncoding RNA-1871 (LINC01871) affects the chemoresistance of CRC cells. METHODS: Relative level of LINC01871 in CRC tissues was assessed by reverse transcription quantitative PCR (RT-qPCR). Kaplan-Meier analysis was conducted to determine the relevance of LINC01871 and the prognosis of CRC patients. Cell Counting Kit-8 (CCK-8) and colony formation assay were used to evaluate the proliferation of SW480 cells. Expression levels of proteins and their genes were assessed by western blot, immunofluorescence staining and RT-qPCR. In addition, the interaction of LINC01871, miR-142-3p and protein zyg-11 homolog B (ZYG11B) were analyzed via dual-luciferase reporter assays. RESULTS: LINC01871 was low-expressed in CRC tissues and cell lines. Patients with a low level of LINC01871 showed significantly lower survival rate. pcDNA-LINC01871 significantly reduced the viability of SW480 cells ( P < 0.01), elevated SW480 cells sensitivity to 5-FU ( P < 0.01), reduced LC3 punctate aggregates ( P < 0.01) and downregulated the relative mRNA expression level of autophagy related protein 9A, autophagy related protein 4B and high mobility group box 1 ( P < 0.01) in SW480 cells. Moreover, LINC01871 was found to sponge miR-142-3p, and ZYG11B was the target of miR-142-3p. MiR-142-3p mimic significantly recovered the effect of pcDNA-LINC001871, whereas pcDNA-ZYG11B reversed the recovery effect of the miR-142-3p mimic. CONCLUSION: LINC01871/miR-142-3p/ ZYG11B axis regulates the chemoresistance of CRCs by inducing autophagy.

Spatially isolating Li+ reduction from Li deposition via a Li22Sn5 alloy protective layer for advanced Li metal anodes.

A Li alloy based artificial coating layer can improve the cyclic performance of Li metal anodes. However, the protective mechanism is not well clarified due to multiple components of the artificial layer and complicated interface in liquid electrolytes. Herein, a single-component Li22Sn5 alloy layer buffered Li anode is paired with a solid-state polymer electrolyte, where a metallic Sn film is sputtered onto the Li anode and the subsequent alloying reaction leads to the formation of a Li22Sn5 phase. During the striping/plating process, the thickness and composition of the Li-Sn alloy passivation layer remain unchanged. Meanwhile, Li+ ions are reduced on the top surface of the Li22Sn5 layer, then the reduced Li atoms immediately pass through the alloy layer, and finally dense Li deposition occurs beneath the protective layer, realizing spatial isolation of the electrochemical reduction of Li+ from Li nucleation/growth. This unique protection mechanism can principally avoid the formation of Li dendrites and efficiently mitigate irreversible reactions between the Li anode and the polymer electrolyte. The synergistic effects lead to a clean and flat surface of the protected Li electrode, enabling a prolonged cycle lifetime over 1300 h at 25 °C at 0.1 mA cm-2 and 0.1 mA h cm-2 in a configuration of symmetrical cells.

Atrazine promotes breast cancer development by suppressing immune function and upregulating MMP expression.

There is evidence that the triazine herbicide atrazine, which is used extensively, is present in both surface water and groundwater, and its interfering effect on immune systems, endocrine systems, and tumours has been reported by laboratory and epidemiological studies. This study explored how atrazine affected 4T1 breast cancer cell development in vitro and in vivo. The obtained results showed that after exposure to atrazine, the cell proliferation and tumour volume were significantly increased and the expression of MMP2, MMP7, and MMP9 was upregulated. The thymus and spleen indices, the CD4 + and CD3 + lymphocyte percentages which from the spleen and inguinal lymph nodes, and the CD4 + /CD8 + ratio were noticeably lower than they were in the control group. Importantly, tumour-infiltrating lymphocytes such as CD4 + , CD8 + , and NK cells were decreased while Treg cells were increased. Moreover, IL-4 was increased and IFN-γ and TNF-α were decreased in the serum and tumour microenvironment. These results suggested that atrazine can suppress systemic as well as local tumour immune function and upregulate MMPs to promote breast tumour development.

CircRNA608-microRNA222-PINK1 axis regulates the mitophagy of hepatic stellate cells in NASH related fibrosis.

BACKGROUND: Increasing evidences have confirmed the relationship between mitophagy and nonalcoholic steatohepatitis (NASH). The exact mechanism of upstream circular RNAs (circRNAs) regulating PTEN-induced putative kinase 1 (PINK1) mediated mitophagy and its contribution to NASH-related liver fibrosis was explored in our study. METHODS: Primary hepatic stellate cells (PHSCs) from C57BL/6 mice transfected with small interfering RNAs against PINK1 (si-PINK1) and negative control (si-NC) were prepared to perform circRNA sequence. Differentially expressed circRNAs, bioinformatic analysis and predicting software were performed to select axis of circ608/miR-222/PINK1. The expressions of circ608/miR-222/PINK1 were verified by RT-qPCR. The mitochondrial function was evaluated by immunofluorescence staining of COX4 and LC3B. RESULTS: PINK1-mediated mitophagy was inhibited in NASH-related liver fibrosis mice. CircRNA sequence revealed there were 37 DE-circRNAs between si-PINK1 PHSCs and si-NC PHSCs. Bioinformatic analysis showed these DE-circRNAs were related to enriched signaling pathways (such as Wnt, Rap1, mTOR, Hippo) regulating liver fibrosis and mitophagy. Circ608 was significantly down-regulated in lipotoxic HSCs and in livers of NASH-related liver fibrosis mice. MiR222 was identified to be the target miRNA of circ608 and was negatively regulated by circ608 in lipotoxic HSCs. MiR222 also had a binding site with PINK1 and could negatively regulate PINK1. So, the axis of circ608-miR222-PINK1 was proved to participate in NASH-related liver fibrosis by regulating mitophagy. These results illustrated that circ608 might promote PINK1-mediated mitophagy though inhibiting miR222 in lipotoxic HSCs. CONCLUSION: Circ608 could promote PINK1-mediated mitophagy of HSCs though inhibiting miR222 in NASH-related liver fibrosis.

The influences of timing of urgent endoscopy in patients with acute variceal bleeding: a cohort study.

BACKGROUND: There has always been a debate on the optimal timing of endoscopy in patients with acute variceal bleeding (AVB). OBJECTIVE: This study aimed to examine the relation between the timing of endoscopy and the short-term outcomes of patients with AVB. METHODS: Patients with AVB who underwent endoscopy within 24 h after admission at our tertiary care center from 2014 to 2022 were evaluated retrospectively. The primary outcomes were the 6-week mortality and re-bleeding. The secondary outcomes included the total number of blood units transfused, the length of hospital stay, and the need for salvage therapy. We used Cox proportional hazards model to analyze the predictors of 6-week mortality in all patients as well as in those who were at high risk of further bleeding or death. RESULTS: A total of 312 patients were enrolled. Among them, 170 patients (54.49%) underwent urgent endoscopy (< 6 h), and 142 patients (45.51%) underwent early endoscopy (6-24 h). There were no significant differences between the urgent-endoscopy group and the early-endoscopy group, regarding the 6-week mortality (16.47% vs. 10.56%; P value = 0.132) and 6-week re-bleeding rate (11.2% vs. 16.2%; P value = 0.196). In multivariate analysis, time to endoscopy was independent of 6-week mortality (P value = 0.170), but the time between the beginning of bleeding and endoscopy (within 12 h) was significantly associated with low 6-week mortality (OR: 0.16; 95% CI: 0.06-0.46; P value = 0.001). Time to endoscopy was still not associated with 6-week mortality in patients at high risk for further bleeding or death (Glasgow-Blatchford score ≥ 12, n = 138, P value = 0.902). CONCLUSIONS: Endoscopy performed within 6 h of admission, rather than within 6 to 24 h, did not improve six-week clinical outcomes in patients in stable condition with AVB and even those who were at high risk of further bleeding and death.

Stabilization of the Li metal anode through constructing a LiZn alloy/polymer hybrid protective layer towards uniform Li deposition.

Constructing an artificial solid electrolyte interphase (SEI) layer is an effective strategy for solving uncontrolled Li dendrite growth resulting from an unstable and heterogeneous Li/electrolyte interface. Herein, we develop a hybrid layer of a LiZn alloy and a polyethylene oxide (PEO) polymer to protect the Li metal anode for achieving a Li dendrite-free Li metal anode surface. The LiZn alloy is advantageous for fast Li+ transport, and is uniformly dispersed in the PEO matrix to regulate electronic and Li+ ion flux distributions homogeneously. Furthermore, the flexible PEO network can alleviate the volume change during cycling. The synergistic effect enables Li deposition underneath the hybrid film. Hence, the hybrid protection film results in significantly improved cycling stability with respect to the pristine Li metal anode. A symmetric Li/Li cell with a composite protective layer can be cycled for over 1000 h at a current density of 1 mA cm-2 with a fixed capacity of 1 mA h cm-2, and a full cell with a high areal capacity of the LiFePO4 (2.45 mA h cm-2) cathode exhibits an outstanding cycling performance.

Cu2+-mediated turn-on fluorescence biosensor based on DNA-templated silver nanoclusters for label-free and sensitive detection of adenosine triphosphate.

A Cu2+-mediated turn-on fluorescence biosensor based on the DNA-templated green-emitting silver nanoclusters (DNA@g-AgNCs) was developed for label-free and sensitive detection of adenosine 5'-triphosphate (ATP). Cu2+ was able to quench the bright green fluorescence of DNA@g-AgNCs because of the coordination and photoinduced electron transfer between DNA@g-AgNCs and Cu2+. Therefore, a unique and effective fluorescence biosensor can be constructed with the formation of DNA@g-AgNCs/Cu2+/ATP ternary-competition system. With the introduction of ATP, the DNA@g-AgNCs/Cu2+ fluorescence sensing system will be disrupted and the fluorescence of DNA@g-AgNCs was recovered due to higher affinity of ATP towards Cu2+. On the basis of this feature, the DNA@g-AgNCs/Cu2+ fluorescence sensing system demonstrated quantitative determination of ATP in the range 0.05 - 3 µM and a detection limit of 16 nM. Moreover, the fluorescence sensing system was successfully applied to the quantitative determination of ATP in human urine and serum samples with recoveries ranging from 98.6 to 106.5%, showing great promise to provide  a label-free, cost-efficient, and rapid platform for ATP-related clinical disease diagnosis.

Prominent antibacterial effect of sub 5 nm Cu nanoparticles/MoS2composite under visible light.

Achieving an efficient and inexpensive bactericidal effect is a key point for the design of antibacterial agent. Recent advances have proved molybdenum disulfide (MoS2) as a promising platform for antimicrobial applications, while the combination of metal nanoparticle would promote the antibacterial efficiency. Nevertheless, the dispersivity, cheapness and safety of metal nanoparticle loaded on MoS2raised some concerns. In this paper, we successfully realized a uniform decoration of copper nanoparticles (CuNPs) on surface of MoS2nanosheets, and the size of CuNPs could be controlled below 5 nm. Under 5 min irradiation of 660 nm visible light, the synthesized CuNPs/MoS2composite demonstrated superior antibacterial performances (almost 100% bacterial killed) towards both Gram-negativeE. coliand Gram-positiveS. aureusover the single component (Cu or MoS2), while the bactericidal effect could last for at least 6 h. The synergism of photodynamic generated hydroxyl radical (·OH), oxidative stress without reactive oxygen species production and the release of Cu ions was considered as the mechanism for the antibacterial properties of CuNPs/MoS2. Our findings provided new insights into the development of two-dimensional antibacterial nanomaterials of high cost performance.

Novel Insights into Inkjet Printed Silver Nanowires Flexible Transparent Conductive Films.

Silver nanowire (AgNWs) inks for inkjet printing were prepared and the effects of the solvent system, wetting agent, AgNWs suspension on the viscosity, surface tension, contact angle between ink droplet and poly(ethylene) terephthalate (PET) surface, and pH value of AgNWs ink were discussed. Further, AgNWs flexible transparent conductive films were fabricated by using inkjet printing process on the PET substrate, and the effects of the number printing layer, heat treatment temperature, drop frequency, and number of nozzle on the microstructures and photoelectric properties of AgNWs films were investigated in detail. The experimental results demonstrated that the 14-layer AgNWs printed film heated at 60 °C and 70 °C had an average sheet resistance of 13 Ω∙sq-1 and 23 Ω∙sq-1 and average transparency of 81.9% and 83.1%, respectively, and displayed good photoelectric performance when the inkjet printing parameters were set to the voltage of 20 V, number of nozzles of 16, drop frequency of 7000 Hz, droplet spacing of 15 µm, PET substrate temperatures of 40 °C and nozzles of 35 °C during printing, and heat treatment at 60 °C for 20 min. The accumulation and overflow of AgNWs at the edges of the linear pattern were observed, which resulted in a decrease in printing accuracy. We successfully printed the heart-shaped pattern and then demonstrated that it could work well. This showed that the well-defined pattern with good photoelectric properties can be obtained by using an inkjet printing process with silver nanowires ink as inkjet material.

Size-, Water-, and Defect-Regulated Potassium Manganese Hexacyanoferrate with Superior Cycling Stability and Rate Capability for Low-Cost Sodium-Ion Batteries.

Potassium manganese hexacyanoferrate (KMHCF) is a low-cost Prussian blue analogue (PBA) having a rigid and open framework that can accommodate large alkali ions. Herein, the synthesis of KMHCF and its application as a high-performance cathode in sodium-ion batteries (NIBs) is reported. High-quality KMHCF with low amounts of crystal water and defects and with homogeneous microstructure is obtained by controlling the nucleation and grain growth by using a high-concentration citrate solution as a precipitation medium. The obtained KMHCF exhibits superior cycling and rate performance as a NIB cathode, showing 80% capacity retention after 1000 cycles at 1 C and a high capacity of 95 mA h g-1 at 20 C. Unlike conventional single-cation batteries, the hybrid NIB with KMHCF as cathode and Na as anode in Na-ion electrolyte displays three reversible plateaus that involve stepwise insertion/extraction of both K+ and Na+ in the PBA framework. In later cycling, the K+ -Na+ cointercalated phase is partially converted into a cubic sodium manganese hexacyanoferrate (NaMHCF) phase due to the increasing replacement of Na+ for K+ .

Fabrication of PbS QDs/Graphene Heterostructure Photoelectrochemical Cell by Electrochemical Atomic Layer Epitaxy Method.

In this work, PbS quantum dots were for the first time directly deposited on graphene nanowalls substrate by electrochemical atomic layer epitaxy (ECALE) deposition method. The morphology, composition and 3D structure of PbS/graphene were characterized by field emission scanning electron microscope (FE-SEM), X-ray diffraction (XRD) and Raman spectrum, respectively. The sensitized three-dimensional graphene electrode with PbS quantum dots had great improvement in the performance of photo-electrochemical (PEC), with photocurrent almost four times that of pure graphene film, which presents its great application potential in the fields of photodetector or solar cell.

Reactive Conductive Ink Capable of In Situ and Rapid Synthesis of Conductive Patterns Suitable for Inkjet Printing.

We report a fabrication method of the conductive pattern based on in situ reactive silver precursor inks by inkjet printing. The reactive silver precursor inks were prepared with ethylene glycol and deionized water mixture as the solvent, and silver nitrate as silver source. Sodium borohydride solution as the reducing agent was first coated on photographic paper by screen printing process, and then dried at 50 °C for 4 h. Furthermore, the reactive silver precursor inks were printed on a photographic paper coated with sodium borohydride using inkjet printing to form silver nanoparticles in situ due to redox reaction, and thus a conductive pattern was obtained. The effects of the reactive silver precursor ink concentration and printing layer number and treatment temperature on the electrical properties and microstructures of the printed patterns were investigated systematically. The size range of in situ-formed silver nanoparticles was 50-90 nm. When the reactive silver precursor ink concentration was 0.13 g/mL, the five-layer printed pattern exhibited a sheet resistance of 4.6 Ω/γ after drying at room temperature for 2 h; furthermore, the sheet resistance of the printed pattern decreased to 1.4 Ω/γ after drying at 130 °C for 2 h. In addition, the display function circuit was printed on the photographic paper to realize the display of the numbers 0-99. It provides new research ideas for the development of environmentally friendly and low-cost flexible paper-based circuits.

Revisiting porous foam Cu host based Li metal anode: The roles of lithiophilicity and hierarchical structure of three-dimensional framework.

Lithium (Li) metal anode (LMA) is one of the most promising anodes for high energy density batteries. However, its practical application is impeded by notorious dendrite growth and huge volume expansion. Although the three-dimensional (3D) host can enhance the cycling stability of LMA, further improvements are still necessary to address the key factors limiting Li plating/stripping behavior. Herein, porous copper (Cu) foam (CF) is thermally infiltrated with molten Li-rich Li-zinc (Li-Zn) binary alloy (CFLZ) with variable Li/Zn atomic ratio. In this process, the LiZn intermetallic compound phase self-assembles into a network of mixed electron/ion conductors that are distributed within the metallic Li phase matrix and this network acts as a sublevel skeleton architecture in the pores of CF, providing a more efficient and structured framework for the material. The as-prepared CFLZ composite anodes are systematically investigated to emphasize the roles of the tunable lithiophilicity and hierarchical structure of the frameworks. Meanwhile, a thin layer of Cu-Zn alloy with strong lithiophilicity covers the CF scaffold itself. The CFLZ with high Zn content facilitates uniform Li nucleation and deposition, thereby effectively suppressing Li dendrite growth and volume fluctuation. Consequently, the hierarchical and lithiophilic framework shows low Li nucleation overpotential and highly stable Coulombic efficiency (CE) for 200 cycles in conventional carbonate based electrolyte. The full cell coupled with LiFePO4 (LFP) cathode demonstrates high cycle stability and rate performance. This work provides valuable insights into the design of advanced dendrite-free 3D LMA toward practical application.

An electron-insulating Li2O protection layer endowing a Li-Cu-Zn ternary alloy composite anode with high performance.

We report an electron-insulating layer of Li2O nanoparticles passivating a Li-rich Li-Cu-Zn ternary alloy as an advanced Li anode. The insulating layer ensures Li deposition below the top protective layer and inhibits side reactions effectively. Additionally, the ternary alloy framework offers superior lithiophilicity and robust mechanical stability. Galvanostatic measurements demonstrate a prolonged lifespan of symmetric cells for over 1200 h at 1 mA cm-2 and 1 mA h cm-2.

Single-cell transcriptome reveals a novel mechanism of C-Kit+-liver sinusoidal endothelial cells in NASH.

AIM: To understand how liver sinusoidal endothelial cells (LSECs) respond to nonalcoholic steatohepatitis (NASH). METHODS: We profiled single-LSEC from livers of control and MCD-fed mice. The functions of C-Kit+-LSECs were determined using coculture and bone marrow transplantation (BMT) methods. RESULTS: Three special clusters of single-LSEC were differentiated. C-Kit+-LSECs of cluster 0, Msr1+-LSECs of cluster 1 and Bmp4+Selp+-VECs of cluster 2 were revealed, and these cells with diverse ectopic expressions of genes participated in regulation of endothelial, fibrosis and lipid metabolism in NASH. The number of C-Kit+-primary LSECs isolated from MCD mice was lower than control mice. Immunofluorescence co-staining of CD31 and C-KIT showed C-Kit+-LSECs located in hepatic sinusoid were also reduced in NASH patients and MCD mice, compared to AIH patients and control mice respectively. Interestingly, lipotoxic hepatocytes/HSCs cocultured with C-Kit+-LSECs or the livers of MCD mice receipting of C-Kit+-BMCs (bone marrow cells) showed less steatosis, inflammation and fibrosis, higher expression of prolipolytic FXR and PPAR-α, lower expression of TNF-α and α-SMA. Furthermore, coculturing or BMT of C-Kit+-endothelial derived cells could increase the levels of hepatic mitochondrial LC3B, decrease the degree of mitochondrial damage and ROS production through activating Pink1-mediated mitophagy pathway in NASH. CONCLUSIONS: Hence, a novel transcriptomic view of LSECs was revealed to have heterogeneity and complexity in NASH. Importantly, a cluster of C-Kit+-LSECs was confirmed to recovery Pink1-related mitophagy and NASH progression.

Gradient three-dimensional current collector with lithiophilic nanolayer regulation for efficient lithium metal anode construction.

Metallic lithium (Li) is highly desirable for Li battery anodes due to its unique advantages. However, the growth of Li dendrites poses challenges for commercialization. To address this issue, researchers have proposed various three-dimensional (3D) current collectors. In this study, the selective modification of a 3D Cu foam scaffold with lithiophilic elements was explored to induce controlled Li deposition. The Cu foam was selectively modified with Ag and Sn to create uniform Cu foam (U-Cu) and gradient lithiophilic Cu foam (G-Cu) structures. Density Functional Theory (DFT) calculations revealed that Ag exhibited a stronger binding energy with Li compared to Sn, indicating superior Li induction capabilities. Electrochemical testing demonstrated that the half cell with the G-Cu@Ag electrode exhibited excellent cycling stability, maintaining 550 cycles with an average Coulombic efficiency (CE) of 97.35%. This performance surpassed that of both Cu foam and G-Cu@Sn. The gradient modification of the current collectors improved the utilization of the 3D scaffold and prevented Li accumulation at the top of the scaffold. Overall, the selective modification of the 3D Cu foam scaffold with lithiophilic elements, particularly Ag, offers promising prospects for mitigating Li dendrite growth and enhancing the performance of Li batteries.