Acoustic Controllable Spatiotemporal Cell Micro-oscillation for Noninvasive Intracellular Drug Delivery.

Intracellular cargo delivery is crucial for drug evaluation, nanomedicine development, and gene therapy, in which high efficiency while maintaining cell viability is needed for downstream analysis. Here, an acoustic-mediated precise drug delivering mechanism is proposed by directly modulating cell micro-oscillation mode and membrane permeability. Through phase shifting keying-based spatiotemporal acoustic tweezers, controllable oscillating cell arrays can be achieved in shaking potentials. At the same time, continually oscillating radiation force and fluid shear stress exerted on cells effectively disturbs cellular membrane mobility and enhances permeability, thereby facilitating nanodrug entrance. In experiments, cell oscillation is tunable in frequency (10-2 to 102 Hz), shaking direction, amplitude (0 to quarter acoustic wavelength), and speed. Doxorubicin is actively delivered across cellular membranes and accumulates in inner cells, with a concentration more than 8 times that of the control group. Moreover, there is no obvious compromise in cell activity during oscillation, exhibiting excellent biocompatibility. This "dancing acoustic waves" scheme introduces a new dimension of cell manipulation in both space and time domains and an effective drug delivering strategy, offering advantages of flexibility, gentleness, and high throughput. It may advance related fields like nanobiological research, drug and nanomedicine development, and medical treatment.

[Mongolian medicine Naru-3 reduces neuroinflammation in maintenance stage of neuropathic pain by inhibiting astrocyte activation].

Neuropathic pain(NP) is difficult to be treated since it has similar phenotypes but different pathogenesis in different pathological stages. Targeted intervention of the core regulatory elements at different pathological stages of NP has become a new direction of drug research and development in recent years and provides the possibility for the treatment of NP. The Mongolian medicine Naru-3(NR-3) is effective in the treatment of sciatica and trigeminal neuralgia, the mechanisms of which remain unknown. On the basis of the previous study of the priming stage, this study established the mouse model of spinal nerve ligation(SNL) and measured the changes of pain thresholds by behavioral tests. The network analysis, Western blot, immunofluorescence assay, ELISA, and agonist/antagonist were employed to decipher the mechanism of NR-3 in the treatment of NP in the maintenance stage. The results showed that NR-3 increased the mechanical and thermal pain thresholds of SNL mice, while it had no significant effect on the basal pain threshold of normal mice. NR-3 may relieve the pain in the maintenance stage of NP by blocking the matrix metalloproteinase 2(MMP2)/interleukin-1ß(IL-1ß) pathway in the astrocytes of the dorsal root ganglion(DRG) and spinal cord. The findings have enriched the biological connotation of NR-3 in the treatment of the maintenance stage of NP and provide reference for the rational use of this medicine in clinical practice.

High temporal waveform fidelity stimulated Brillouin scattering phase conjugate mirror using Novec-7500.

A high temporal waveform fidelity stimulated Brillouin scattering phase conjugate mirror (SBS-PCM) with high energy efficiency, based on a novel medium, Novec-7500, is proposed and practically achieved in this study. A theoretical analysis reveals that the temporal-domain waveform distortion is caused by the inherent pulse duration compression effect of the SBS, and this undesirable phenomenon can be significantly suppressed by decreasing the compression coefficient (CC afterwards), which is defined as the gain coefficient divided by the phonon lifetime, which coefficient and is identified as the key parameter for high waveform-fidelity in SBS-PCM. The feasibility of this approach was demonstrated experimentally, in which a reflected pulse with waveform symmetry equals to the pump and an average pulse duration of 0.974 τp (τp is the duration of pump) with an energy efficiency of over 90% was achieved using Novec-7500.

Trajectory engineering of directrons in liquid crystals via photoalignment.

As electrically generated solitons in liquid crystals, directrons represent intriguing structures promising extensive application prospects in the areas of microcargo vehicles, microreactors, and logic devices. However, manipulating directrons along elaborate predetermined trajectories still remains to be largely explored. In this work, the strategy of constructing high-resolution periodic alignment fields for directrons via the polarization holography photoalignment technique is presented. The optimum exposure dose for directrons to form over a broad range of electric fields is determined to be 32.4 J cm-2 for the alignment layers with 1 wt% azo dye SD1. Zigzag and fishhook-shaped trajectories of directrons are realized with two orthogonal polarized beams. The resolution for zigzag steering of directrons is evaluated to be approximately 56 µm to 80 µm, about three to four times the length of directrons. These results not only enrich the forms of motion of directrons, but also lay the foundations for customized trajectories of directrons in future developments.

Comparative microcomputed tomography and histological analysis of the effects of a horizontal platelet-rich fibrin bone block on maxillary sinus augmentation: A preclinical in vivo study.

BACKGROUND: While suggested to be effective in tissue regeneration, the effects of horizontal platelet-rich fibrin (H-PRF) bone block in sinus augmentation have not been verified in an animal model. METHODS: A total of 12 male New Zealand white rabbits that underwent sinus augmentation were divided into two groups: deproteinized bovine bone mineral (DBBM) only and H-PRF bone block. H-PRF was prepared at 700 × g for 8 min using a horizontal centrifuge. The H-PRF bone block was prepared by mixing 0.1 g DBBM with H-PRF fragments and then adding liquid H-PRF. Samples were collected after 4 and 8 weeks and analyzed using microcomputed tomography (micro-CT) for vertical bone gain of the sinus, bone volume/total volume (BV/TV) percentage, trabecular number (Tb.N), trabecular thickness (Tb.Th) and trabecular separation (Tb.Sp). Then, histological analyses were performed to investigate new blood vessels, material residue, bone formation and osteoclasts. RESULTS: Higher vertical bone gain of the sinus floor, BV/TV percentage, Tb.Th, and Tb.N and lower Tb.Sp were found in the H-PRF bone block group at both time points compared with the DBBM group. Higher amounts of new blood vessels and more osteoclasts were found in the H-PRF bone block group than in the DBBM group at both time points, especially in the regions close to the bone plate. More new bone formation and less material residue were observed in the H-PRF bone block group at 8 weeks. CONCLUSIONS: H-PRF bone block showed greater potential for sinus augmentation by promoting angiogenesis, bone formation and bone remodeling in a rabbit model.

Rational Fabrication of Defect-Rich and Hierarchically Porous Fe-N-C Nanosheets as Highly Efficient Oxygen Reduction Electrocatalysts for Zinc-Air Battery.

The rational design of morphology and structure for oxygen reduction reaction (ORR) catalysts still remains a critical challenge. Herein, we successfully construct defect-rich and hierarchically porous Fe-N-C nanosheets (Fe-N-CNSs), by taking advantage of metal-organic complexation and a mesoporous template. Benefiting from the advantages of high density of active sites, fast mass transfer channels, and sufficient reaction area, the optimal Fe-N-CNSs demonstrate satisfactory ORR activity with an excellent half-wave potential of up to 0.87 V, desirable durability, and robust methanol tolerance. Noteworthy, the Fe-N-CNSs based zinc-air battery shows significant performance with a peak power density of 128.20 mW cm-2 and open circuit voltage of 1.53 V, which reveals that the Fe-N-CNSs catalysts present promising practical application prospects. Therefore, we believe that this research will provide guidance for the optimization of Fe-N-C materials.

[Baimai Ointment relieves chronic pain induced by chronic compression of dorsal root ganglion in rats by regulating neuroactive ligand-receptor interaction and HIF-1 signaling pathway].

The Baimai Ointment with the effect of relaxing sinew and activating collaterals demonstrates a definite effect on Baimai disease with pain, spasm, stiffness and other symptoms, while the pharmacodynamic characteristics and mechanism of this agent remain unclear. In this study, a rat model of chronic compression of L4 dorsal root ganglion(CCD) was established by lumbar disc herniation, and the efficacy and mechanism of Baimai Ointment in the treatment of CCD were preliminarily explored by behavioral tests, side effect evaluation, network analysis, antagonist and molecular biology verification. The pharmacodynamic experiment indicated that Baimai Ointment significantly improved the pain thresholds(mechanical pain, thermal pain, and cold pain) and gait behavior of CCD model rats without causing tolerance or obvious toxic and side effects. Baimai Ointment inhibited the second-phase nociceptive response of mice in the formalin test, increased the hot plate threshold of normal mice, and down-regulated the expression of inflammatory cytokines in the spinal cord. Network analysis showed that Baimai Ointment had synergistic effect in the treatment of CCD and was related to descending inhibition/facilitation system and neuroinflammation. Furthermore, behavioral tests, Western blot, and immunofluorescence assay revealed that the pain-relieving effect of Baimai Ointment on CCD may be related to the regulation of the interaction between neuroactive ligand and receptors(neuroligands) such as CHRNA7, ADRA2A, and ADRB2, and the down-regulation of the expression of NOS2/pERK/PI3K, the core regulatory element of HIF-1 signaling pathway in spinal microglia. The findings preliminarily reveal the mechanism of relaxing sinew and activating collaterals of Baimai Ointment in the treatment of Baimai disease, providing a reference for the rational drug use and further research of this agent.

Optofluidic tunable broadband distributed Bragg reflector based on liquid crystal polymer composites.

A dynamically reconfigurable liquid crystal (LC) photonic device is an important research field in modern LC photonics. We present a type of continuously tunable distributed Bragg reflector (DBR) based on LC polymer composites modulated via a novel optofluidic method. LC-templated DBR films are fabricated by photopolymerization under visible standing wave interference. The influences of the incident angle, incident light intensity, and content of ethanol as a pore-forming additive on the reflection behavior are discussed in detail. Then, the LC-templated DBR films are integrated into microfluidic channels and reversibly refilled by different organic solvents. The reconfigurable characteristics of optofluidic DBRs were demonstrated by changing the average refractive index (RI) of the mixed liquids and adjusting the flow rates, resulting in the dynamic and continuous variation of the reflection band within a specific visible light band. It is anticipated that the prototype optofluidic LC device will hopefully be applied to some specific scenarios where conventional means of regulation, such as electric, optical, and temperature fields, are unsuitable and possibly boost the development of microfluidic analysis techniques based on structural color.

Quarter acoustic period pulse compression using stimulated Brillouin scattering in PF-5060.

The pulse duration of the near quarter-acoustic period (τa) is demonstrated in transient stimulated Brillouin scattering (SBS) pulse compression by the suppressing Stokes trailing-edge broadening at high intensities. A theoretical analysis reveals that the difficulty in attaining the transient compression limit is caused by the broadening of the Stokes trailing edge owing to insufficient pump depletion, and this undesirable phenomenon can be significantly suppressed by a high SBS gain coefficient. An average pulse duration of ∼1.05 τa was experimentally achieved in transient compression with a high-energy efficiency of over 30%. Benefiting from energy back conversion, compression below the transient SBS limit (< τa) also occurred when the pump peak power was increased to 150 MW.

Experimental and modeling studies of competitive Pb (II) and Cd (II) bioaccumulation by Aspergillus niger.

Co-existence of toxic metals causes complex toxicity to microorganisms during bioremediation in water and soil. This study investigated the immobilization of Pb2+ and Cd2+ by fungus Aspergillus niger, which has been widely applied to environmental remediation. Five treatments were set, i.e., CK (no toxic metals), Pb2+ only, Cd2+ only, Pb2+/Cd2+ = 1:1(molar ratio), and Pb2+/Cd2+ = 2:1. Cadmium induced strong toxicity to the fungus, and maintained the high toxicity during incubation. However, as Pb/Cd ratio increased from 0 to 2, the removal rates of Cd2+ by A. niger were raised from 30 to 50%. The elevated activities of pyruvate dehydrogenase (PDH) and citrate synthetase (CS) enzymes confirmed that Pb addition could stimulate the growth of A. niger. For instance, citric acid concentrations and CS activities were 463.22 mg/L and 78.37 nmol/min/g, respectively, during 3-day incubation as Pb/Cd = 1. However, these two values were as low as ~ 50 with addition of only Cd. It was hence assumed that appropriate co-existence of Pb2+ enhanced microbial activity by promoting TCA cycle of the fungus. Moreover, the SEM analysis and geochemical modeling demonstrated that Pb2+ cations were more easily adsorbed and mineralized on A. niger with respect to Cd2+. Therefore, instead of intensifying metal toxicity, the addition of appropriate Pb actually weakened Cd toxicity to the fungus. This study sheds a bright future on application of A. niger to the remediation of polluted water with co-existence of Pb and Cd. KEY POINTS: • Cd2+ significantly inhibited P consumption, suggesting its high toxicity to A. niger. • Pb2+ stimulated the growth of A. niger by promoting TCA cycle in the cells. • Cd2+ removal by A. niger were improved with co-existence of Pb2+.

Reconfigurable polymer-templated liquid crystal holographic gratings via visible-light recording.

Polymer-templated nematic liquid crystal (LC) holographic gratings via visible-light recording are presented in the presence of reactive mesogens (RMs) and rose bengal (RB)/N-phenylglycine (NPG) photoinitiation systems. By optimizing the concentration of RMs in the polymer-templated LC gratings, the template after being washed out can be refilled with suitable fluidic components. And the dependence of the first-order diffraction efficiency (DE) on the concentration of RB and NPG molecules was discussed in detail. The polarization-dependency of diffraction properties was also investigated. It is revealed that the diffractive behaviors of polymer-templated LC gratings can be dynamically reconfigured by varying temperature or refilling organic solutions with different refractive index (RI). Furthermore, the potential for recording holograms using green light is explored. We expect that the reconfigurable polymer-templated LC gratings fabricated via visible-light interference would provide a facile approach to regulate the diffraction properties of holographic gratings apart from electric field, thus paving a way towards a class of novel anti-counterfeiting devices.

Siglec1 enhances inflammation through miR-1260-dependent degradation of IκBα in COPD.

It has been documented that sialic acid-binding Ig-like lectin 1 (Siglec1) is a cell surface protein with a variety of functions in the immune system. In the present study, we evaluated whether Siglec1 plays a role in chronic obstructive pulmonary disease (COPD). Results show that the expression of Siglec1 was increased in the lung of COPD rats, and that Siglec1 overexpression greatly enhanced the expression of inflammatory cytokines including tumor necrosis factor α (TNF-α), interleukin 1ß (IL-1ß) and IL-6 in cigarette smoke extract (CSE)-treated NR8383 cells, a rat lung-derived macrophage cell line. Notably, the proinflammatory effect of Siglec1 was totally inhibited by overexpression of nuclear factor of κ light polypeptide gene enhancer in B-cells inhibitor α (IκBα). Importantly, Siglec1 overexpression increased miR-1260, which then degraded IκBα through its 3' untranslated region (3'UTR). Further study demonstrated that miR-1260 inhibitor attenuated inflammation in CSE-induced rat COPD lung and in CSE-treated NR8383 cells. Finally, the inhibitory effect of miR-1260 on inflammation was totally lost when IκBα was inhibited. In summary, the present study demonstrated that Siglec1 exerts its proinflammatory effects through increasing miR-1260, leading to decreased expression of IκBα.

Real-time generation of dynamically patterned cholesteric liquid crystal fingerprint textures based on photoconductive effect.

We present a convenient approach to facilitate the real-time generation of updatable dynamically patterned cholesteric liquid crystal (CLC) fingerprint textures based on photoconductive effect. The photoconductive Bi12SiO20 (BSO) substrate acts as virtual electrode to obtain the desired states of CLCs by both electric and light fields. Owing to different boundary conditions, the switching of four states; that is, planar, fingerprint, metastable, and homeotropic states, and the rotation of fingerprint stripes can be achieved in planar alignment (PA) cell and hybrid alignment (HA) cell, respectively. With the aid of a digital micro-mirror (DMD)-based exposure system, binary and gray-scale images were successfully written and updated by light upon suitable voltages. This work provides an alternative approach to photoaddress CLC fingerprint patterns, without needing special photoalignment agents or photoresponsitive chiral dopants. We expect that it could be employed in the manipulation of nano/micro-objects by light.

Pulse-shape dependence of stimulated Brillouin scattering pulse compression to sub-phonon lifetime.

A new approach to sub-phonon lifetime pulse compression by stimulated Brillouin scattering (SBS) is presented. Triangular and step pulse pumps are both used as a pump source in a single-cell SBS compression setup. Compared with a Gaussian pump (shortest compressed pulse is the phonon lifetime with the highest energy conversion, approximately 60% under the same conditions), the compression ratio is significantly improved in the case of triangular and step pulse pumps, and there is some improvement in the energy conversion when a step pulse pump is used. A pulse as short as a quarter of a phonon lifetime is produced by a triangular pulse pump, with an energy conversion above 30%. The pump pulse shape is identified as the key parameter in achieving sub-phonon lifetime pulse compression. By using a step pulse shape, a 4.5 ns pump pulses with a 60mJ at 1064-nm are compressed down to 292 ps (below semi-phonon-lifetime) in 3M Fluorinert Electronic Liquid FC-770 with an energy conversion above 65%. This work presents a route to reliable generation of sub-semi-phonon-lifetime pulses by SBS compression.

Photoalignment of dye-doped cholesteric liquid crystals for electrically tunable patterns with fingerprint textures.

We present a convenient photoalignment approach to fabricate rewritable fingerprint textures with designed geometrical patterns based on methyl red doped cholesteric liquid crystals (MDCLCs). MDCLC systems with/without nanoparticles of polyhedral oligomeric silsesquioxanes (POSS) were employed to realize two types of sophisticated binary patterns, respectively. Based on the understanding of involved mechanisms related to boundary conditions and middle-layer theory, we demonstrated the precise manipulation of fingerprint patterns by varying the fingerprint grating vectors in different domains. Notably, the hybrid-aligned liquid crystal configuration induced by POSS nanoparticles, which leads to the electrically rotatable grating, can be converted into the planar-aligned configuration by the adsorption of photoexcited methyl red molecules onto the indium-tin-oxide (ITO) surface. In this manner, the dynamic voltage-dependent behavior of fingerprint gratings is altered from the rotation mode (R-mode) to the on-off mode (O-mode).

Using the spatial light modulator as a binary optical element: application to spatial beam shaping for high-power lasers.

The liquid crystal spatial light modulator (SLM) is an effective active beam-shaping device through adjusting each pixel transmittance to improve the spatial beam quality of the output laser, which can also be used as a binary optical element (BOE) with each pixel transmittance 0 or 1 to realize spatial beam shaping for high-power lasers. We present and demonstrate an efficient shaping method of the SLM used as BOE based on diffraction principle. The method can be used to control the output nearfield actively by compensating the spatial nonuniformity of transmission and amplification in the high-power laser system. Results show the output nearfield beam quality improves significantly after shaping by using this method with the fluence contrast changing from 22% to 11.3% within only two shots in the single-shot operation laser.

Demonstration of patterned polymer-stabilized cholesteric liquid crystal textures for anti-counterfeiting two-dimensional barcodes.

We evaluated the feasibility of embedding periodically arranged squares with planar and vertical texture into a background with a developable-modulation (DM) type cholesteric liquid crystal (CLC) fingerprint texture by a two-step ultraviolet-induced polymerization method. Checker-patterned optical diffractive elements, which can be seen as a variation of a two-dimensional (2D) barcode, were first realized and the dependence of diffraction behaviors on incident light polarization and applied voltage were investigated. Taking advantage of the natural randomness and uncontrollable variations of a DM-type fingerprint textures, a polymer-stabilized CLC (PSCLC) graphic symbol with a 2D barcode pattern was then implemented with enhanced anti-counterfeiting features that are difficult to falsify or duplicate. The results indicate that the multiplexing of nonuniform DM-type fingerprint gratings, cross-polarized light readout, and unique polarization diffraction characteristics can improve the level of security.

High-quality near-field beam achieved in a high-power laser based on SLM adaptive beam-shaping system.

We demonstrate a high-power laser system with a high-quality near-field beam by using a liquid-crystal spatial light modulator (SLM). An efficient spatial beam shaping algorithm is discussed which can improve the output nearfield beam quality effectively. Both small-signal and large-signal amplification situation of the laser are considered in the beam shaping algorithm. The experimental results show that the near field fluence modulation of output is improved from 1.99:1 to 1.26:1 by using the liquid-crystal SLM. Obvious uniform spatial fluence distribution and near-field beam quality improvement are observed.

Spatial frequency doubling with two-step technique.

The phenomenon of spatial frequency doubling generated by a two-step technique with the collimated beam at normal incidence in the second exposure is presented. Theoretical analysis demonstrates that the phenomenon is induced by the Talbot effect in photoresist and the superposition of two exposures, and the minimum achievable period of the grating with double spatial frequency can be close to one half of the exposure wavelength in vacuum, divided by the refractive index of photoresist λ/2n. The two-step technique has the potential to be a simpler and more practical resolution-improving technique for the Talbot-effect-based approach of spatial frequency doubling.

Light-regulated soliton dynamics in liquid crystals.

Electrically powered solitons are particle-like field configurations in out-of-equilibrium nematics that have garnered significant interest. However, their random generation and lack of controllable motion have limited their application. Here, we present a reconfigurable optoelectronic approach capable of regulating the entire lifecycle of solitons by utilizing multi-strategy digital light projection to construct delicate patterning of virtual electrode. We demonstrate that optically actuated domains with diverse geometry enable the generation of multiple solitons and further allow in-situ formation of individual soliton by matching the light pattern to its dimension. Exquisitely engineered light intensity of patterns facilitates modulation of soliton velocity and transformation of propagating direction. The utilization of a light-guided channel enables the on-demand control of soliton trajectories along customized paths. Furthermore, dynamic light patterns that vary in space and time allow for collective motion such as migration, mimicking phototaxis in biological systems. This reconfigurable manipulation strategy, grounded in the photoconductive effect, proves highly versatile and effective in directing soliton dynamics, heralding the potential for their programmable control and offering a significant advantage in multitasking scenarios.