Prussian White/Reduced Graphene Oxide Composite as Cathode Material to Enhance the Electrochemical Performance of Sodium-Ion Battery.

Prussian white (PW) is considered a promising cathode material for sodium-ion batteries. However, challenges, such as lattice defects and poor conductivity limit its application. Herein, the composite materials of manganese-iron based Prussian white and reduced graphene oxide (PW/rGO) were synthesized via a one-step in situ synthesis method with sodium citrate, which was employed both as a chelating agent to control the reaction rate during the coprecipitation process of PW synthesis and as a reducing agent for GO. The low precipitation speed helps minimize lattice defects, while rGO enhances electrical conductivity. Furthermore, the one-step in situ synthesis method is simpler and more efficient than the traditional synthesis method. Compared with pure PW, the PW/rGO composites exhibit significantly improved electrochemical properties. Cycling performance tests indicated that the PW/rGO-10 sample exhibited the highest initial discharge capacity and the best cyclic stability. The PW/rGO-10 has an initial discharge capacity of 128 mAh g-1 at 0.1 C (1 C = 170 mA g-1), and retains 49.53% capacity retention after 100 cycles, while the PW only delivers 112 mAh g-1 with a capacity retention of 17.79% after 100 cycles. Moreover, PW/rGO-10 also shows better rate performance and higher sodium ion diffusion coefficient (DNa+) than the PW sample. Therefore, the incorporation of rGO not only enhances the electrical conductivity but also promotes the rapid diffusion of sodium ions, effectively improving the electrochemical performance of the composite as a cathode material for sodium-ion batteries.

Phosphonate-Functionalized Ionic Liquid Gel Polymer Electrolyte with High Safety for Dendrite-Free Lithium Metal Batteries.

The conventional lithium-ion battery technology relies on the liquid carbonate-based electrolyte solution, which causes excessive side reactions, serious risk of electrolyte leakage, high flammability, and significant safety hazards. In this work, phosphonate-functionalized imidazolium ionic liquid (PFIL) is synthesized and used as a gel polymer electrolyte (GPE) to replace the organic carbonate-based electrolyte solution. The as-prepared ionic liquid-based gel polymer electrolyte (IL-GPE) shows low crystallinity, flame retardance, and excellent electrochemical performance. Thanks to the fast double channel transport of lithium ions in the IL-GPE electrolyte, a high ionic conductivity of 0.48 mS cm-1 and a lithium-ion transference number of 0.37 are exhibited. Symmetrical lithium cells with IL-GPE retain stable cycling even after 3000 h under 0.1 mA cm-2. IL-GPE exhibits good compatibility toward lithium metal, yielding excellent long-term electrochemical kinetic stability. IL-GPE induces the formation of a uniform and robust SEI layer, inhibiting the growth of lithium dendrites and improving the rate performance and cycle stability. Furthermore, Li/LiFePO4 cells exhibit a specific capacity of 63 mA h g-1 after 150 cycles at 5.0 C, with a capacity retention of 90.2%. It is foreseen that this GPE is a promising candidate to enhance the safety of high-performance lithium metal batteries.